HALOGEN HF FREE Four-Channel ESD Suppressor PolySurgTM 42510ESDA-TR1 Pb Applications Applied to a high speed signal interface, the 42510ESDA protects: * * * * * * * Digital video equipment Mobile phone GPS Antenna Bluetooth communication equipment antenna circuit IEEE-1394 DVI HDMI Part Numbering System: Surface Mount Device Description The Cooper Bussmann(R) PolySurgTM 42510ESDA four-channel array ESD suppressor protects sensitive electronic circuits from the threat of electrostatic discharge (ESD) without distorting data signals. This protection is a result of its ultra-low capacitance (0.1pF typical) that is well suited for HDMI ESD protection applications. * * * * * Halogen free, lead free and RoHS compliant for global applications * Ultra-low capacitance (0.1pF typical) ideally suited for protecting high speed data applications * Provides ESD protection with fast response time (<1ns) allowing equipment to pass the IEC 61000-4-2 Level 4 test * Four (4) channel array * Zero signal distortion * Low leakage current (<0.01A typical) ESDA- TR1 Four channel SIN 1 chip 2.5x1.0mm footprint size ESDA ESD Suppressor Tape and reel packaging code Packaging * Supplied in tape and reel packaging, 5000 parts per seven inch (178mm) reel per EIA Standard 481-1 Catalog Number Description 42510ESDA-TR1 5000 suppressors in paper tape on a 7 inch (178mm) reel Electrical Specifications Characteristic Rated Voltage (max) Leakage Current (max @ 12Vdc) Trigger Voltage (Vt) Clamping Voltage (Vc) Capacitance (Cp) @1MHz* Response Time ESD Voltage Capability, IEC 61000-4-2 Contact Discharge Mode ESD Voltage Capability, IEC 61000-4-2 Air Discharge Mode ESD Withstand Pulses Environmental Specifications Value/Range 12V 0.01A 300V Typical 30V Typical 0.1pF Typical <1ns Characteristic Load Humidity Thermal Shock Value +85C/90%RH with rated voltage for 1000 hrs -40C to +85C, 30 minute cycle, 5 cycles J-STD-020 Standard: Level 2 Moisture Resistance Test (1 year floor life under 30C/65%RH conditions Operating Temperature Range -40C to +85C (-40F to 185F) Storage Temperature Range -55C to +125C (-67F to +257F) 8kV 15kV 100 Times Minimal * Note, Capacitance measured with 1Vrms BU-SB10816 2510 Ordering Information Features 0810 4 Page 1 of 2 Data Sheet 4378 Circuit Schematic Soldering Recommendations * Compatible with lead and lead-free solder reflow processes * Hand soldering - soldering tip should not directly touch part 280C max for 3 sec. max * Peak reflow temperatures and durations: - IR Reflow = 260C max for 20 sec. max - Wave Solder = 260C max for 10 sec. max HDMI Application Recommended IR Reflow Profile Dimensions - mm Design Considerations * Follow the soldering recommendations to avoid deforming product * Do not use high temperature, high humidity or corrosive atmospheres (sulfide and chloride gas) that could damage the solderability * Moisture Sensitivity Level (MSL) according to J-STD-020 standard: Level 2 (Floor Life 1 year under <30C/65%RH conditions) * Solderability requirement according to IPC/JEDEC J-STD-002C, Test D, Test B1 * Use Sn/Ag/Cu (96.5/3.0/0.5) or equivalent solder and activated flux #5 or equivalent. W B L T D E C B C D E L T W 0.2 0.1 0.3 0.05 0.2 0.05 0.5 0.05 2.5 0.1 0.5 0.1 1.0 0.1 Tape and Reel Packaging Specifications - mm Recommended Pad Layout - mm ( & ) ' / $ % : 7RS7DSH Unit: mm G P P1 X X1 0.2 0.5 1 0.2 0.3 Note: Print solder 0.01~0.015mm thick. Y Y1 Z 0.6 1.4 1.4 A B C D E F L W 8.00 3.50 1.75 2.00 4.00 1.50 2.90 1.40 0.30 0.05 0.10 0.05 0.10 0.10 0.20 0.20 The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Life Support Policy: Cooper Bussmann does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. (c) 2010 Cooper Bussmann www.cooperbussmann.com 0810 BU-SB10816 Page 2 of 2 Data Sheet 4378