F-219 ERM8-060-01-L-D-EM2-TR ERM8-030-01-L-D-RA-L-K-TR (0.80 mm) .0315" ERM8-RA, ERM8-EM SERIES RUGGED EDGE RATE STRIPS (R) ERM8-RA / ERM8-EM Board Mates: ERF8 NO. OF POSITIONS PER ROW ERM8 PLATING OPTION 01 D OTHER OPTION RA TR ERM8-RA Cable Mates: ERCD SPECIFICATIONS -010, -013, -020, -025, -030, -040, -049, -050, -060, -070, -075 For complete specifications and recommended PCB layouts see www.samtec.com?ERM8-RA or www.samtec.com?ERM8-EM Insulator Material: Black LCP Terminal Material: Phosphor Bronze Latch Material: BeCu Plating: Au or Sn over 50 " (1.27 m) Ni Current Rating: 2.2 A per pin (2 pins powered) Operating Temp Range: -55 C to +125 C Voltage Rating: 235 VAC / 318 VDC RoHS Compliant: Yes (5.75) .226 -L -L -DS (11.00) .433 Ground Pin (1.68) .066 (0.80) .0315 (0.35) .014 RECOGNITIONS (6.12) .241 (1.57) (1.00) .062 .039 DIA -L NO. OF POSITIONS PER ROW 01 ALSO AVAILABLE (MOQ Required) -DS OPTION PIN PAIR COUNT COUNT * Other Positions * Solder leads & weld tab for (2.36 mm) .093" thick board * Other platings 2x13 2x25 8 16 01 APPLICATIONS ARM/HSSTP NEXUS5001TM.org POWER.orgTM POS. PART NOs. ASP-137971-01 ASP-137974-01 ASP-133811-01 ASP-133811-02 ASP-135040-01 Notes: Patented Some lengths, styles and options are non-standard, non-returnable. SERIES ERM8-EM ERM8-EM ERM8-EM ERM8-EM ERM8-EM D -L -005, -010, -013, -020, -025, -030, -040, -049, -050, -060, -070, -075 FILE NO. E111594 (1.40) .055 PLATING OPTION (3.82) .150 28 OTHER OPTION TR EM2 = (1.60 mm) .062" Thick PCB (5.70) .224 (6.80) .268 (0.80) .031 -EGPS (3.20) .126 (7.75) .305 -DS -L OPTION -EGPS = Extended Guide Post Shield (-010, -020, -025, -030 pos.only) -L Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM -DSS = Differential Pair + Extended Guide Post Shield (-025 pos. only) (Hot Swap) (2.10) .082 (0.80) .0315 -L = Latching (Mates to ERF8 Lead Style -05.0 or -RA only) = Differential Pair (-013, -025 pos.only) (Hot Swap) (14.79) .582 (5.60) .220 02 (5.20) .205 ERM8-RA/ERF8-RA Rating based on Samtec reference channel.For full SI performance data visit Samtec.com or contact SIG@samtec.com -EM2 = 10 " (0.25 m) Gold on contact, Matte Tin on tail No. of positions x (0.80) .0315 + (9.00) .354 EGPS = No. of positions x (0.80) .0315 + (10.00) .394 = Differential Pair (-013, -025 positions only) (Hot swap) HIGH-SPEED CHANNEL PERFORMANCE 01 For complete scope of recognitions see www.samtec.com/quality 11 17 20 23 35 Ground Pin Signal Pins -DS 02 ERM8 -TR = Tape & Reel = Latching (6.25) .246 Lead-Free Solderable: Yes SMT Lead Coplanarity (ERM8-RA): (0.10 mm) .004" max (010-050) (0.15 mm) .006" max (060-075)* SMT Lead Coplanarity (ERM8-EM): (0.10 mm) .004" max (005-030) (0.12 mm) .005" max (040-075)* *(.004" stencil solution may be available; contact IPG@samtec.com) STANDARD = (6.00 mm) .236" DIA Polyimide Film Pick & Place Pad No. of Positions x (0.80) .0315 + (13.00) .512 (5.01) .197 PROCESSING NEXUS5001TM.org POWER.orgTM -K = 10 " (0.25 m) Gold on contact, Matte Tin on tail All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. G b p s -TR = Tape & Reel