Film Chip Capacitors PET-HT DIELECTRIC - CB Series GENERAL DESCRIPTION Film chip capacitor using a naked and stacked construction with metallized High Temperature PET (polyethylene terephtalate). ADVANTAGES APPLICATIONS General purpose function in low voltage applications where miniaturization and SMD is required. Typical applications would be: * Automotive (Airbag, Fuel injection calculator...) * Telecom (Public switching systems, modems, telephone set, cordless, mobile) * Industrial (SMPS, Power convertor module...) * Use of high temperature dielectric films makes these capacitors suitable for IR or vapor phase reflow processes. This chip is built without specific encapsulation. * The intrinsic elasticity of the dielectric film allows an excellent compatibility of the capacitor with all types of material for printed circuit boards. * The self-healing property of film technology results to a safety open failure mode and better overall reliability. * Excellent thermal shock resistance. * Low dissipation factor ESR & ESL. * No piezoelectric effect. * Available in tape and reel suitable for automatic placement. * Non-polar construction. Outer Layer Termination Plating : 100% matte Sn Ni Barrier Under Termination Silver Epoxy Resin Brass Active Layers : PET dielectric PERFORMANCE CHARACTERISTICS Climatic Category Capacitance Range Tolerance on CR Nominal Voltages Test Voltage Soldering methods Tangent of Loss Angle at 1kHz (DF) Insulation resistance minimum : IR Temperature range A.C. applications 10 55/125/56 10nF to 4.7F 5%, 10% 63Vdc to 630Vdc 1.4Vr 2 sec. at 25C IR or vapor phase reflow (not suitable for wave soldering) < 100 x 10-4 for C 0.33F IR > 1000 M at 20C for 1 min. charge at 10Vdc for VR < 100Vdc and 100Vdc for VR 100Vdc for C > 0.33F IR C > 400 sec. at 20C for 1 min. charge at 10Vdc for VR < 100Vdc and 100Vdc for VR 100Vdc -55C to 125C with voltage derating of 1.25%/C between 105C and 125C for high frequency A.C. application please check with AVX Film Chip Capacitors PET-HT DIELECTRIC - CB Series CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR) W H T millimeters (inches) L VOLTAGE Vdc: 63V Vac: 40V Capacitance Range (CR) 0.270F 0.330F 0.390 0.470 0.560 0.680 0.820 1F 1.5 2.2 3.3 4.7F Ordering Code L 5.8 (0.228) CB042D0334+ -5.80 (0.228) CB042D0394++ -- 5.80 (0.228) CB042D0474+ -5.80 (0.228) CB042D0564+ -5.80 (0.228) CB042D0684+ -5.80 (0.228) CB052D0824+ -7.2 (0.283) CB052D0105+ -7.2 (0.283) CB052D0155+ -7.20 (0.283) CB162D0225+ -10.5 (0.413) CB172D0335+ -12.8 (0.503) CB182D0475+ -15.3 (0.601) CB042D0274+ -- 0.180F CB042E0184+ -- 0.220F CB042E0224+ -- 0.270F CB042E0274 +-- 0.330 CB042E0334+ -- 0.390 CB042E0394+ -- 0.470 CB042E0474+ -- 0.560 CB052E0564+ -- 0.680 CB052E0684+ -- 0.820 CB052E0824+ -- 1F CB052E0105+ -- 1.5 CB162E0155+ -- 5.8 (0.228) 5.80 (0.228) 5.8 (0.228) 5.80 (0.228) 5.80 (0.228) 5.80 (0.228) 7.20 (0.283) 7.20 (0.283) 7.20 (0.283) 7.20 (0.283) 10.5 (0.413) Chip Dimensions *Tolerances (page 6) W H max 5.0 2.8 (0.195) (0.110) 5.00 3.30 (0.195) (0.130) 5.00 3.40 (0.195) (0.134) 5.00 3.50 (0.195) (0.138) 5.00 3.50 (0.195) (0.138) 5.00 4.00 (0.195) (0.158) 6.1 3.7 (0.24) (0.146) 6.1 3.7 (0.24) (0.146) 6.10 5.30 (0.240) (0.209) 7.6 5.8 (0.299) (0.229) 10.2 5.50 (0.401) (0.216) 13.7 4.90 (0.539) (0.193) 5.0 (0.195) 5.00 (0.195) 5.0 (0.195) 5.00 (0.195) 5.00 (0.195) 5.00 (0.195) 6.10 (0.240) 6.10 (0.240) 6.10 (0.240) 6.10 (0.240) 7.60 (0.299) 2.3 (0.091) 3.30 (0.130) 3.4 (0.134) 4.00 (0.158) 3.90 (0.154) 4.30 (0.169) 4.20 (0.165) 5.00 (0.197) 4.70 (0.185) 5.70 (0.224) 6.10 (0.240) Tape Dimensions T 0.8 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.8 (0.032) 0.8 (0.032) 0.80 (0.032) 0.8 (0.032) 0.80 (0.032) 0.80 (0.032) W 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 24.0 (0.944) 24.0 (0.944) 16.0 (0.629) 24.0 (0.944) 24.0 (0.944) 24.0 (0.944) 0.8 (0.032) 0.80 (0.032) 0.8 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 16.0 (0.629) 16.0 (0.629) 16.0 (0.629) 16.0 (0.629) 24.0 (0.944) P1 K0 8.0 3.1 (0.315) (0.122) 8.00 3.45 (0.315) (0.136) 8.00 3.45 (0.315) (0.136) 8.00 4.10 (0.315) (0.162) 8.00 4.10 (0.315) (0.162) 8.00 4.10 (0.315) (0.162) 12 3.8 (0.472) (0.149) 12 3.8 (0.472) (0.149) 12.0 5.50 (0.472) (0.216) 12 6.19 (0.472) (0.244) 16.0 5.70 (0.629) (0.224) 24.0 5.50 (0.944) (0.216) VOLTAGE Vdc: 100V 8.0 2.43 (0.315) (0.096) 8.00 3.45 (0.315) (0.136) 8.0 3.45 (0.315) (0.136) 8.00 4.10 (0.315) (0.161) 8.00 4.10 (0.315) (0.161) 8.0 4.50 (0.315) (0.177) 12.0 4.80 (0.472) (0.189) 12.0 5.23 (0.472) (0.206) 12.0 4.80 (0.472) (0.189) 12.0 5.90 (0.472) (0.232) 12.0 6.19 (0.472) (0.244) Reel Dimensions A W1 W2 max 330 12.4 18.4 (12.99) (0.488) (0.724) 330 12.4 18.4 (12.99) (0.488) (0.724) 330 12.4 18.4 (12.99) (0.488) (0.724) 330 12.4 18.4 (12.99) (0.488) (0.724) 330 12.4 18.4 (12.99) (0.488) (0.724) 330 12.4 18.4 (12.99) (0.488) (0.724) 330 24.4 30.4 (12.99) (0.96) (1.196) 330 24.4 30.4 (12.99) (0.96) (1.196) 330 16.4 22.4 (12.99) (0.645) (0.881) 330 24.4 30.4 (12.99) (0.96) (1.196) 330 24.4 30.4 (12.99) (0.961) (1.196) 330 24.4 30.4 (12.99) (0.961) (1.196) Vac: 63V 330 12.4 18.4 (12.99) (0.488) (0.724) 330 12.4 18.4 (12.99) (0.488) (0.724) 330 12.4 18.4 (12.99) (0.488) (0.724) 330 12.4 18.4 (12.99) (0.488) (0.724) 330 12.4 18.4 (12.99) (0.488) (0.724) 330 12.4 18.4 (12.99) (0.488) (0.724) 330 16.4 22.4 (12.99) (0.645) (0.881) 330 16.4 22.4 (12.99) (0.645) (0.881) 330 16.4 22.4 (12.99) (0.645) (0.881) 330 16.4 22.4 (12.99) (0.645) (0.881) 330 24.4 30.4 (12.99) (0.961) (1.196) Packaging Unit Reel Pkg Code Bulk 1500 Reel 3000 1500 2800 BC 1500 2800 BC 1500 2300 BC 1500 2300 BC 1500 2300 BC 1000 2250 BC 1000 2250 BC 1000 1000 BC 500 900 BC 300 700 BC 300 500 BC 1500 3500 BC 1500 3000 BC 1500 2800 BC 1500 2300 BC 1500 2300 BC 1500 1900 BC 1000 1800 BC 1000 1100 BC 1000 1800 BC 1000 900 BC 500 900 BC BC Replace the + by the tolerance code: J = 5% or K = 10% Replace the -- by the packaging suffix: -- = bulk BC = tape & reel 11 Film Chip Capacitors PET-HT DIELECTRIC - CB Series CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR) W H T millimeters (inches) L VOLTAGE Vdc: 100V Vac: 63V Capacitance Range (CR) Ordering Code 2.2 CB172E0225+ -- 3.3 CB182E0335+ -- 4.7F CB182E0475+ -- 0.047F CB042G0473+ -- 0.056 CB042G0563+ -- 0.068 CB042G0683+ -- 0.082 CB042G0823+ -- 0.1F CB042G0104+ -- 0.120 CB052G0124+ -- 0.150 CB052G0154+ -- 0.180 CB052G0184+ -- 0.220 CB052G0224+ -- 0.270 CB162G0274+ -- 0.330 CB162G0334+ -- 0.390 CB162G0394+ -- 0.470 CB162G0474+ -- 0.560 CB172G0564+ -- 0.680 CB172G0684+ -- 0.820 CB182G0824+ -- 1F CB182G0105+ -- 1.5 CB182G0155+ -- Chip Dimensions *Tolerances (page 6) L W H max T 12.8 10.2 5.50 0.80 (0.503) (0.401) (0.216) (0.032) 15.3 13.7 5.20 0.80 (0.601) (0.539) (0.204) (0.032) 15.3 13.7 7.10 0.80 (0.601) (0.539) (0.279) (0.032) 5.80 (0.228) 5.80 (0.228) 5.80 (0.228) 5.80 (0.228) 5.80 (0.228) 7.20 (0.283) 7.20 (0.283) 7.20 (0.283) 7.20 (0.283) 10.5 (0.413) 10.5 (0.413) 10.5 (0.413) 10.5 (0.413) 12.8 (0.503) 12.8 (0.503) 15.3 (0.601) 15.3 (0.601) 15.3 (0.601) 5.00 (0.195) 5.00 (0.195) 5.00 (0.195) 5.00 (0.195) 5.00 (0.195) 6.10 (0.240) 6.10 (0.240) 6.10 (0.240) 6.10 (0.240) 7.60 (0.299) 7.60 (0.299) 7.60 (0.299) 7.6 (0.299) 10.2 (0.402) 10.2 (0.402) 13.7 (0.539) 13.7 (0.539) 13.7 (0.539) 3.00 (0.118) 3.60 (0.142) 4.00 (0.158) 4.00 (0.158) 4.00 (0.158) 4.30 (0.169) 4.30 (0.169) 5.10 (0.200) 4.90 (0.193) 4.80 (0.189) 5.60 (0.220) 5.40 (0.213) 6.15 (0.241) 5.60 (0.220) 6.50 (0.255) 5.10 (0.201) 6.00 (0.236) 7.00 (0.276) Replace the + by the tolerance code: J = 5% or K = 10% Replace the -- by the packaging suffix: -- = bulk BC = tape & reel 12 Tape Dimensions W 24.0 (0.944) 24.0 (0.944) 24.0 (0.944) P1 K0 16.0 5.70 (0.629) (0.224) 24.0 5.50 (0.944) (0.216) 24.0 7.60 (0.944) (0.299) VOLTAGE Vdc: 250V 0.80 12.0 8.00 3.10 (0.032) (0.472) (0.315) (0.122) 0.80 12.0 8.00 4.10 (0.032) (0.472) (0.315) (0.161) 0.80 12.0 8.00 4.10 (0.032) (0.472) (0.315) (0.161) 0.80 12.0 8.00 4.10 (0.032) (0.472) (0.315) (0.161) 0.80 12.0 8.00 4.10 (0.032) (0.472) (0.315) (0.161) 0.80 16.0 12.0 4.80 (0.032) (0.629) (0.472) (0.189) 0.80 16.0 12.0 4.80 (0.032) (0.629) (0.472) (0.189) 0.80 16.0 12.0 5.23 (0.032) (0.629) (0.472) (0.206) 0.80 16.0 12.0 5.23 (0.032) (0.629) (0.472) (0.206) 0.80 24.0 12.0 6.19 (0.032) (0.944) (0.472) (0.244) 0.80 24.0 12.0 6.19 (0.032) (0.944) (0.472) (0.244) 0.80 24.0 12.0 6.19 (0.032) (0.944) (0.472) (0.244) 0.80 24.0 12.0 6.19 (0.032) (0.944) (0.472) (0.244) 0.80 24.0 16.0 5.70 (0.032) (0.944) (0.629) (0.225) 0.80 24.0 16.0 7.00 (0.032) (0.944) (0.629) (0.275) 0.80 24.0 24.0 5.50 (0.032) (0.944) (0.944) (0.217) 0.80 24.0 24.0 6.30 (0.032) (0.944) (0.944) (0.248) 0.80 24.0 24.0 7.60 (0.0315) (0.944) (0.944) (0.299) Reel Dimensions A W1 W2 max 330 24.4 30.4 (12.99) (0.961) (1.196) 330 24.4 30.4 (12.99) (0.961) (1.196) 330 24.4 30.4 (12.99) (0.961) (1.196) Vac: 160V 330 12.4 18.4 (12.99) (0.488) (0.724) 330 12.4 18.4 (12.99) (0.488) (0.724) 330 12.4 18.4 (12.99) (0.488) (0.724) 330 12.4 18.4 (12.99) (0.488) (0.724) 330 12.4 18.4 (12.99) (0.448) (0.724) 330 16.4 22.4 (12.99) (0.645) (0.881) 330 16.4 22.4 (12.99) (0.645) (0.881) 330 16.4 22.4 (12.99) (0.645) (0.881) 330 16.4 22.4 (12.99) (0.645) (0.881) 330 24.4 30.4 (12.99) (0.961) (1.196) 330 24.4 30.4 (12.99) (0.961) (1.196) 330 24.4 30.4 (12.99) (0.961) (1.196) 330 24.4 30.4 (12.99) (0.961) (1.196) 330 24.4 30.4 (12.99) (0.961) (1.196) 330 24.4 30.4 (12.99) (0.961) (1.196) 330 24.4 30.4 (12.99) (0.961) (1.196) 330 24.4 30.4 (12.99) (0.961) (1.196) 330 24.4 30.4 (12.99) (0.961) (1.196) Packaging Unit Reel Pkg Code Bulk 300 Reel 700 300 500 BC 300 300 BC 1500 3000 BC 1500 2300 BC 1500 2300 BC 1500 2300 BC 1500 2300 BC 1000 1800 BC 1000 1800 BC 1000 1100 BC 1000 1100 BC 500 1100 BC 500 900 BC 500 900 BC 500 900 BC 300 700 BC 300 600 BC 300 500 BC 300 400 BC 300 300 BC BC Film Chip Capacitors PET-HT DIELECTRIC - CB Series CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR) W H T millimeters (inches) L VOLTAGE Vdc: 400V Vac: 200V Capacitance Range (CR) Ordering Code 0.010F CB042I0103+ -- 0.012 CB042I0123+ -- 0.015 CB042I0153+ -- 0.018 CB052I0183+ -- 0.022 CB052I0223+ -- 0.027 CB052I0273+ -- 0.033 CB052I0333+ -- 0.047 CB052I0473+ -- 0.056 CB162I0563+ -- 0.068 CB162I0683+ -- 0.082 CB162I0823+ -- 0.100F CB162I0104+ -- 0.120 CB172I0124+ -- 0.150 CB172I0154+ -- 0.180 CB172I0184+ -- 0.220 CB172I0224+ -- 0.270 CB172I0274+ -- 0.330 CB182I0334+ -- 0.470F CB182I0474+ -- 0.010F CB042K0103+ -- 0.012 CB042K0123+ -- 0.015 CB042K0153+ -- 0.018 CB052K0183+ -- L 5.80 (0.228) 5.80 (0.228) 5.80 (0.228) 7.2 (0.283) 7.2 (0.283) 7.2 (0.283) 7.2 (0.283) 7.20 (0.283) 10.5 (0.413) 10.5 (0.413) 10.5 (0.413) 10.5 (0.413) 12.8 (0.503) 12.8 (0.503) 12.8 (0.503) 12.8 (0.503) 12.8 (0.503) 15.3 (0.601) 15.3 (0.601) 5.80 (0.228) 5.80 (0.228) 5.80 (0.228) 5.80 (0.228) Chip Dimensions *Tolerances (page 6) W H max 5.00 3.00 (0.195) (0.017) 5.00 2.40 (0.195) (0.095) 5.00 4.00 (0.195) (0.158) 6.1 2.8 (0.240) (0.110) 6.1 3.5 (0.240) (0.138) 6.1 2.8 (0.240) (0.110) 6.1 3.3 (0.240) (0.130) 6.10 4.50 (0.240) (0.177) 7.60 3.10 (0.299) (0.122) 7.60 3.60 (0.299) (0.141) 7.60 4.20 (0.299) (0.165) 7.60 4.70 (0.299) (0.185) 10.2 3.90 (0.402) (0.154) 10.2 4.60 (0.402) (0.181) 10.2 5.60 (0.402) (0.220) 10.2 6.80 (0.402) (0.265) 10.2 6.80 (0.402) (0.265) 13.7 5.60 (0.539) (0.220) 13.7 6.20 (0.539) (0.244) 5.00 (0.195) 5.00 (0.195) 5.00 (0.195) 6.10 (0.240) 2.80 (0.110) 3.30 (0.130) 4.00 (0.158) 2.80 (0.110) Tape Dimensions T 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.8 (0.032) 0.8 (0.032) 0.8 (0.032) 0.8 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) W P1 K0 12.0 8.00 3.10 (0.472) (0.315) (0.122) 12.0 8.00 2.43 (0.472) (0.315) (0.096) 12.0 8.00 4.10 (0.472) (0.315) (0.161) 16.0 12 3.8 (0.629) (0.472) (0.150) 16.0 12 3.8 (0.629) (0.472) (0.150) 16.0 12 3.8 (0.629) (0.472) (0.150) 16.0 12 3.8 (0.629) (0.472) (0.150) 16.0 12.0 4.80 (0.629) (0.472) (0.189) 24.0 12.0 3.93 (0.944) (0.472) (0.155) 24.0 12.0 3.93 (0.944) (0.472) (0.155) 24.0 12.0 6.19 (0.944) (0.472) (0.244) 24.0 12.0 6.19 (0.944) (0.472) (0.244) 24.0 16.0 4.00 (0.944) (0.629) (0.157) 24.0 16.0 4.70 (0.944) (0.629) (0.185) 24.0 16.0 7.00 (0.944) (0.629) (0.274) 24.0 16.0 7.00 (0.944) (0.629) (0.274) 24.0 16.0 7.00 (0.944) (0.629) (0.274) 24.0 24.0 6.30 (0.944) (0.944) (0.248) 24.0 24.0 6.30 (0.944) (0.944) (0.248) VOLTAGE Vdc: 630V 12.0 8.00 3.10 (0.472) (0.315) (0.122) 12.0 8.00 3.10 (0.472) (0.315) (0.122) 12.0 8.00 4.10 (0.472) (0.315) (0.161) 24.0 12.0 3.80 (0.944) (0.472) (0.149) Reel Dimensions A W1 W2 max 330 12.4 18.4 (12.99) (0.488) (0.724) 330 12.4 18.4 (12.99) (0.488) (0.724) 330 12.4 18.4 (12.99) (0.488) (0.724) 330 16.4 22.4 (12.99) (0.645) (0.881) 330 16.4 22.4 (12.99) (0.645) (0.881) 330 16.4 22.4 (12.99) (0.645) (0.881) 330 16.4 22.4 (12.99) (0.645) (0.881) 330 16.4 22.4 (12.99) (0.645) (0.881) 330 24.4 30.4 (12.99) (0.961) (1.196) 330 24.4 30.4 (12.99) (0.961) (1.196) 330 24.4 30.4 (12.99) (0.961) (1.196) 330 24.4 30.4 (12.99) (0.961) (1.196) 330 24.4 30.4 (12.99) (0.961) (1.196) 330 24.4 30.4 (12.99) (0.961) (1.196) 330 24.4 30.4 (12.99) (0.961) (1.196) 330 24.4 30.4 (12.99) (0.961) (1.196) 330 24.4 30.4 (12.99) (0.961) (1.196) 330 24.4 30.4 (12.99) (0.961) (1.196) 330 24.4 30.4 (12.99) (0.961) (1.196) Vac: 250V 330 12.4 18.4 (12.99) (0.488) (0.724) 330 12.4 18.4 (12.99) (0.488) (0.724) 330 12.4 18.4 (12.99) (0.488) (0.724) 330 24.4 30.4 (12.99) (0.961) (1.196) Packaging Unit Reel Pkg Code Bulk 1500 Reel 3000 1500 3500 BC 1500 2300 BC 1000 2250 BC 1000 2250 BC 1000 2250 BC 1000 2250 BC 1000 1800 BC 500 1400 BC 500 1400 BC 500 900 BC 500 900 BC 300 1100 BC 300 900 BC 300 600 BC 300 600 BC 300 600 BC 300 400 BC 300 400 BC 1500 3000 BC 1500 2800 BC 1500 2300 BC 1000 2250 BC BC Replace the + by the tolerance code: J = 5% or K = 10% Replace the -- by the packaging suffix: -- = bulk BC = tape & reel 13 Film Chip Capacitors PET-HT DIELECTRIC - CB Series CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR) W H T millimeters (inches) L VOLTAGE Vdc: 630V Vac: 250V Capacitance Range (CR) Ordering Code 0.022 CB052K0223+ -- 0.027 CB052K0273+ -- 0.033 CB052K0333+ -- 0.047 CB162K0473+ -- 0.056 CB162K0563+ -- 0.068 CB162K0683+ -- 0.082 CB172K0823+ -- 0.100F CB172K0104+ -- 0.120 CB172K0124+ -- 0.150 CB172K0154+ -- 0.180 CB182K0184+ -- 0.220 CB182K0224+ -- 0.270F CB182K0274+ -- L 7.20 (0.283) 7.20 (0.283) 7.20 (0.283) 10.5 (0.413) 10.5 (0.413) 10.5 (0.413) 12.8 (0.503) 12.8 (0.503) 12.8 (0.503) 12.8 (0.503) 15.3 (0.601) 15.3 (0.601) 15.3 (0.601) Chip Dimensions *Tolerances (page 6) W H max 6.10 3.50 (0.240) (0.138) 6.10 4.10 (0.240) (0.161) 6.10 5.00 (0.240) (0.197) 7.60 3.60 (0.299) (0.141) 7.60 4.30 (0.299) (0.169) 7.60 5.20 (0.299) (0.205) 10.2 4.30 (0.402) (0.169) 10.2 5.00 (0.402) (0.197) 10.2 5.60 (0.402) (0.220) 10.2 6.90 (0.402) (0.271) 13.7 5.00 (0.539) (0.197) 13.7 5.80 (0.539) (0.229) 13.7 7.20 (0.539) (0.284) Replace the + by the tolerance code: J = 5% or K = 10% Replace the -- by the packaging suffix: -- = bulk BC = tape & reel 14 Tape Dimensions T 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) W 24.0 (0.944) 16.0 (0.629) 16.0 (0.629) 24.0 (0.944) 24.0 (0.944) 24.0 (0.944) 24.0 (0.944) 24.0 (0.944) 24.0 (0.944) 24.0 (0.944) 24.0 (0.944) 24.0 (0.944) 24.0 (0.944) P1 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 16.0 (0.629) 16.0 (0.629) 16.0 (0.629) 16.0 (0.629) 24.0 (0.944) 24.0 (0.944) 24.0 (0.944) K0 3.80 (0.149) 4.80 (0.189) 4.80 (0.189) 3.93 (0.155) 6.19 (0.244) 6.19 (0.244) 4.70 (0.185) 5.70 (0.225) 5.70 (0.225) 7.00 (0.275) 5.50 (0.217) 6.30 (0.248) 7.60 (0.299) Reel Dimensions A 330 (12.99) 330 (12.99) 330 (12.99) 330 (12.99) 330 (12.99) 330 (12.99) 330 (12.99) 330 (12.99) 330 (12.99 ) 330 (12.99 ) 330 (12.99) 330 (12.99) 330 (12.99) W1 W2 max 24.4 30.4 (0.961) (1.196) 16.4 22.4 (0.645) (0.881) 16.4 22.4 (0.645) (0.881) 24.4 30.4 (0.961) (1.196) 24.4 30.4 (0.961) (1.196) 24.4 30.4 (0.961) (1.196) 24.4 30.4 (0.961) (1.196) 24.4 30.4 (0.961) (1.196) 24.4 30.4 (0.961) (1.196 ) 24.4 30.4 (0.961) (1.196 ) 24.4 30.4 (0.961) (1.196) 24.4 30.4 (0.961) (1.196) 24.4 30.4 (0.961) (1.196) Packaging Unit Reel Pkg Code Bulk 1000 Reel 2250 1000 1800 BC 1000 1100 BC 500 1400 BC 500 900 BC 500 900 BC 300 900 BC 300 700 BC 300 700 BC 300 600 BC 300 500 BC 300 400 BC 300 300 BC BC Film Chip Capacitors PET-HT DIELECTRIC - CB Series MOUNTING AND SOLDERING RECOMMENDATIONS SOLDERING PROFILE The capacitors can be mounted using infrared and vapor phase soldering following recommended below. They are NOT suitable for wave soldering. All temperature refer to topside of the package, measured on the package body surface. 150C 200C 180 sec. max 217C 75 sec. max 245C 10 sec. 10 sec. 6C / sec. 6C / sec. Ramp up Tp - 5C TL 150C 200C 180 sec. max 217C 60 sec. max 240C tp Tp 2220 to 2824 4030 to 6054 3C / second max 3C / second max Ts max Temperature (C) Profile Feature Ramp-Up (Ts max to Tp) Preheat - Temperature Min (Ts min) - Temperature Min (Ts max) - Time (ts min to ts max) Time maintained above - Temperature (TL) - Time (tL) Peak temperature (Tp) Time within 5C of peak temperature (tp) Ramp-Down tL Ts min Ramp down tS 0 30 60 90 120 150 180 210 240 270 300 330 Time (seconds) *Reflow soldering referring to JEDEC Standard with some limitations *JEDEC J-Std 020C RECOMMENDED SOLDER PASTE THICKNESS For optimum solderability, the recommended soldering paste thickness: 2220 to 2824 :150 to 200m 4030 to 6054 :200 to 300m C In case of hand soldering, the temperature of the soldering iron should not be above 250C. Special care must be taken to avoid touching the capacitor body with the iron tip. B PAD DIMENSIONS: millimeters (inches) A Size Code Case Size 04 05 16 17 18 2220 2824 4030 5040 6064 A 5.00 6.00 7.50 11.2 14.6 B (0.195) (0.234) (0.295) (0.441) (0.575) 1.90 2.50 3.00 3.50 3.60 (0.075) (0.098) (0.118) (0.137) (0.147) C 4.50 5.70 8.00 10.3 12.6 (0.178) (0.224) (0.315) (0.406) (0.496) RECOMMENDED CLEANING OTHER CAUTIONS To clean flux from the PC board assembly, the recommended products are: ethanol, isopropyl alcohol, and deionized water wash. The cleaning products to avoid are: Toluene, Xylene, Trichloroethylene, Terpene Cleaner EC-7, surface active agent. In case of using another solvent, please contact us. Flame retardancy: the dielectric film is not a flame retardant material. Environment: contact us when chips are used in humid or gas atmosphere and /or when using resin. Recommended handling: do not use edged tools, so not to damage the capacitors. TIN WHISKERS TESTS : JEDEC STANDARD NO 22A121 Stress Type Ref. Spec. Temperature cycling JESD22-A104 Ambient Temperature / Humidity Storage High Temperature / Humidity Storage Test Conditions -55C +85(+10/-0)C air 5 to 10 minutes soak 3 cycles/hour Analysis Results SEM x 1000 Pass 30+/-2C - 60+/-3% RH -2000H SEM x 1000 Pass 70+/-5C - 93+3/-2% RH -1000H SEM x 1000 Pass 15 Film Chip Capacitors PET-HT DIELECTRIC - CB Series ELECTRICAL CHARACTERISTICS VERSUS TEMPERATURE AND FREQUENCY ELECTRICAL CHARACTERISTICS FREQUENCY CHARACTERISTICS Capacitance 10 8 4 C/C vs TEMPERATURE Capacitance C/C 20C (%) 3 6 2 4 1 2 0 0 -1 -2 -2 -4 -3 -6 -4 -8 -55C -30C -5C +20C +45C +70C +95C +120C -5 0.1 Temperature 1 Dissipation Factor 10 100 FREQUENCY (kHz) 1000 Dissipation Factor 400 160 DF 20C (10 -4) DC/C = (temperature) DF (1kHz) vs TEMPERATURE 140 300 D.F. (10 -4) 120 100 200 80 60 100 40 0 20 0.1 1 -55C -30C -5C 100 10 0 1000 FREQUENCY (kHz) +20C +45C +70C +95C +120C Temperature Insulation Resistance 10000.0 Z (mOhm) Impedance 1000.00 100nF IR vs TEMPERATURE IR(G.ohm) 1000.0 100.00 100.0 47 nF 220 nF 10.0 10.00 100 nF 470 nF 1F 1.0 4.7F 0.1 -55C -30C -5C +20C +45C +70C +95C +120C Temperature 16 1.00 1.00 10.00 FREQUENCY (MHz) Film Chip Capacitors PET-HT DIELECTRIC - CB Series RMS VOLTAGE AND CURRENT VERSUS FREQUENCY MAXIMUM VOLTAGE (VRMS) AND CURRENT (IRMS) VS FREQUENCY Typical curves results from measurement carried out at ambient temperature (25C) and sinusoidal wave-forms (for size CB04 to CB18) 45 40 35 30 25 20 15 10 5 0 63Vdc / 40 Vac 5 4.7F 1.5F 0.47F 4.5 4 I rms (A) V rms (V) 63Vdc / 40 Vac 4.7F 3.5 3 1.5F 2.5 2 0.47F 1.5 1 0.1 1 10 100 1000 0.5 0 0.1 10000 FREQUENCY (kHz) 1 10 100 1000 10000 1000 10000 FREQUENCY (kHz) 100 Vdc / 63 Vac 100 Vdc / 63 Vac 70 4.7F 1.5F 0.22F 60 40 I rms (A) V rms (V) 50 30 20 10 0 0.1 1 10 100 1000 10000 FREQUENCY (kHz) 6.5 6 5.5 5 4.5 4 3.5 3 2.5 2 1.5 1 0.5 0 0.1 4.7F 1.5F 0.22F 1 10 100 FREQUENCY (kHz) 250 Vdc / 160 Vac 1F 0.47F 0.1F 120 100 80 60 40 20 0 0.1 I rms (A) V rms (V) 180 160 140 250 Vdc / 160 Vac 1 10 100 FREQUENCY (kHz) 1000 10000 6 5.5 5 4.5 4 3.5 3 2.5 2 1.5 1 0.5 0 0.1 1F 0.47F 0.1F 1 10 100 1000 10000 FREQUENCY (kHz) 17 Film Chip Capacitors PET-HT DIELECTRIC - CB Series RMS VOLTAGE AND CURRENT VERSUS FREQUENCY MAXIMUM VOLTAGE (VRMS) AND CURRENT (IRMS) VS FREQUENCY Typical curves results from measurement carried out at ambient temperature (25C) and sinusoidal wave-forms (for size CB04 to CB18) 220 200 180 160 140 120 100 80 60 40 20 0 0.1 0.47F 0.1F 400 Vdc / 200 Vac 1 0.01F 0.47F I rms (A) V rms (V) 400 Vdc / 200 Vac 0.5 0.1F 0.01F 1 10 100 1000 0 0.1 10000 1 10 FREQUENCY (kHz) 0.27F 0.1F 1000 10000 0.27F 0.5 0.1F 0.01F 1 10 100 1000 10000 0 0.1 1 10 100 FREQUENCY (kHz) MAXIMUM PULSE RISE TIME (DV/DT) 18 10000 1 0.01F FREQUENCY (kHz) Voltage Range Dv/dt max. (V/sec) 1000 630 Vdc / 250 Vac I rms (A) V rms (V) 630 Vdc / 250 Vac 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 0.1 100 FREQUENCY (kHz) 63 100 250 400 630 40 50 150 200 250 Film Chip Capacitors PET-HT DIELECTRIC - CB Series - RoHS MATERIALS CONTROLLED BY ROHS (PPM BY WEIGHT): Mass / unit (g) Lead Mercury Cadmium CB range RoHS Limit (ppm) Pass/Fail 0 1000 Pass 0 1000 Pass 0 100 Pass Hexavalent Chromium 0 1000 Pass PBB PBDE 0 1000 Pass 0 1000 Pass This product has been tested and found to be compliant with all requirements, provisions, and exemptions of EU Directive 2002/95/EC of the European Parliament and Council of January 27, 2003. On the Restriction of use of certain Hazardous Substances (RoHS) in electrical and electronic equipment and EU Directive 2000/53/EC regarding ELV or End of Life Vehicle. ROHS / ELV STATUS External Plating 100% Matte Sn as standard LEAD-FREE STATUS / MOISTURE SENSITIVITY RANKING Pb Free Reflow Solder compliant, MSL = 3. Reflow soldering referring to Jedec Standard with some limitations. Additional JESD-97 data to be phased in MSL e3 termination. PRODUCT LABELING: PRODUCT TRACEABILITY: (For informational purposes only to be phased in on reel and container.) Full internal material traceability by reference to unique lot number marked on reel and external package. Pb Free: RoHS Compliant: 19