Ambient Light Sensor - Surface Mount EAALSTIC1708A0 Features * Close responsively to the human eye spectrum * Light to Current, analog output * Good output linearity across wide illumination range * Low sensitivity variation across various light sources * Guaranteed temperature performance, -40 to 85 * Wide supply voltage range, 2.5V to 5.5V * Size : 1.7mm(L)*0.8mm(W)*0.6mm(H) * RoHS compliant and Pb Free package * Compliance with EU REACH. Description The EAALSTIC1708A0 is a low cost ambient light sensor, consisting of phototransistor in miniature SMD. Everlight Americas ALS series products are a good effective solution to the power saving of display backlighting of mobile appliances, such as the mobile phones, NB and PDAs. Due to the high rejection ratio of infrared radiation, the spectral response of the ambient light sensor is close to that of human eyes. Applications * Detection of ambient light to control display backlighting Mobile devices - mobile phones, PDAs Computing device - TFT LCD monitor for Notebook computer Consumer device - TFT LCD TV, plasma TV, video camera, digital camera, toys * Automatic residential and commercial management * Automatic contrast enhancement for electronic signboard * Ambient light monitoring device for daylight and artificial light - Street light, CCD/CCTV 1 Copyright Revision : 1(c) 2014, Everlight Americas Inc. All Rights Reserved. Release Date : 12.17.2014. Release Issue No: DLS-0000131 Rev.1 LifecyclePhase: Date:2014-12-22 15:48:58.0 www.everlightamericas.com Expired Period: Forever DATASHEET Ambient Light Sensor - Surface Mount EAALSTIC1708A0 Packaging dimension Top View Collector Emitter Collector Mark Bottom View Note: Tolerances unless mentioned 0.1mm. Unit = mm 2 Copyright Revision : 1(c) 2014, Everlight Americas Inc. All Rights Reserved. Release Date : 12.17.2014. Release Issue No: DLS-0000131 Rev.1 LifecyclePhase: Date:2014-12-22 15:48:58.0 www.everlightamericas.com Expired Period: Forever DATASHEET Ambient Light Sensor - Surface Mount EAALSTIC1708A0 Absolute Maximum Ratings Parameter Symbol Rating Unit Supply Voltage VCC -0.5 ~ 6.0 V Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40 ~ +100 Soldering Temperature [Note] Tsol 260 10 Note: For detail reflow time and the recommended temperature profile, please refer to page 8. Recommended Operating Conditions Parameter Symbol Min. Max. Unit Supply Voltage VCC -40 +85 Operating Temperature Topr 2.5 5.5 V Electro-Optical Characteristics (Ta=25) Parameter Symbol Min. Typ. Max. Unit Dark Current ICEO ----- ----- 0.1 A VCE=10V, EV=0Lux VCE(sat) ----- ----- 0.4 V IC=2mA,EV=1000Lux IPH1 5 15 ----- A VCE=5V, EV= 100Lux A VCE=5V, EV=1000Lux Collector - Emitter Saturation Voltage Light Current IPH2 50 150 ----- Condition [Note1] [Note1] IPH3 140 520 ----- A VCE=5V,EV= 1000Lux Photo-current Ratio IPH3/ IPH2 ----- 3.5 ----- ----- Saturation Output Voltage VO 4.5 4.6 ----- V VCC=5V,EV= 1000Lux VCE=5V,EV= 1000Lx, RL=75K Peak Sensitivity Wavelength P ----- 630 ----- nm Sensitivity Wavelength Range 390 ----- 700 nm [Note2] [Note2] Switching Rise Time tr ----- 0.11 ----- mS Time Fall Time tf ----- 0.12 ----- mS VCE=5V,RL=7.5K Note: 1. White Fluorescent light (Color Temperature = 6500K) is used as light source. However, White LED is substituted in mass production. 3 Copyright Revision : 1(c) 2014, Everlight Americas Inc. All Rights Reserved. Release Date : 12.17.2014. Release Issue No: DLS-0000131 Rev.1 LifecyclePhase: Date:2014-12-22 15:48:58.0 www.everlightamericas.com Expired Period: Forever DATASHEET Ambient Light Sensor - Surface Mount EAALSTIC1708A0 2. Illuminance by CIE standard illuminant-A / 2856K, incandescent lamp. Typical Electro-Optical Characteristics Curves Fig.1 Light Current vs. Illuminance Fig.2 Output Voltage vs. Illuminance (Typ.) (Typ.) Fig.3 Spectral Response Fig.4 100 (Typ.) Spectral Response (Typ.) 1 .0 4 Ev = 100 Lux 1 .0 3 80 1 .0 2 Relative light current Relative Sensitivity (%) Light current vs. Supply Voltage (Typ.) 60 40 20 1 .0 1 1 .0 0 0 .9 9 0 .9 8 0 .9 7 0 300 400 500 600 700 800 900 0 .9 6 2.0 Wavelength (nm) Fig.5 2.5 3 .0 3 .5 4 .0 4.5 V c c (V ) Light current vs. Temperature Fig.6 Dark Current vs. Temperature (Typ.) (Typ.) 250 1.3 Ev = 100 Lux Light current vs. Illuminance Light current (uA) Relative light current 1.2 1.1 1.0 0.9 0.8 200 150 100 50 0.7 0.6 -40 -20 0 20 40 60 80 100 0 0 100 200 300 400 500 600 700 800 900 10001100 Temperature ( ) 4 Copyright Revision : 1(c) illuminance (Lux) 2014, Everlight Americas Inc. All Rights Reserved. Release Date : 12.17.2014. Release Issue No: DLS-0000131 Rev.1 LifecyclePhase: Date:2014-12-22 15:48:58.0 www.everlightamericas.com Expired Period: Forever DATASHEET Ambient Light Sensor - Surface Mount EAALSTIC1708A0 Converting Photocurrent to Voltage Vcc Light Source Iph Vout RL CL GND Note: 1. The output voltage (Vout) is the product of photocurrent (IPH) and loading resistor (RL) 2. A right loading resistor shall be chosen to meet the requirement of maximum ambient light, and output saturation voltage: Vout(max.) = Iout(max.) x RL Vout(saturation)Vcc0.4V 3. To avoid 60Hz ripple from fluorescent lamps, we suggest that the time constant must be greater than 0.5 second: RL x CL 0.5 (empirical data) Packing Quantity Specification 4000 PCS/ 1 Reel Label Explanation CPN: Customer's Product Number P/N: Product Number QTY: Packing Quantity CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank LOT No: Lot Number MADE IN TAIWAN: Production Place 5 Copyright Revision : 1(c) 2014, Everlight Americas Inc. All Rights Reserved. Release Date : 12.17.2014. Release Issue No: DLS-0000131 Rev.1 LifecyclePhase: Date:2014-12-22 15:48:58.0 www.everlightamericas.com Expired Period: Forever DATASHEET Ambient Light Sensor - Surface Mount EAALSTIC1708A0 Reel Dimensions Carrier Tape Dimensions: Loaded Quantity 4000 pcs Per Reel Emitter Collector Note: Tolerances unless mentioned 0.1mm. Unit = mm Recommended method of storage Reflow Terms: JEDEC Level 4 Specification Dry box storage is recommended as soon as the aluminum bag has been opened prevent 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift might cause big current happen. (Burned-out might happen). 6 Copyright Revision : 1(c) 2014, Everlight Americas Inc. All Rights Reserved. Release Date : 12.17.2014. Release Issue No: DLS-0000131 Rev.1 LifecyclePhase: Date:2014-12-22 15:48:58.0 www.everlightamericas.com Expired Period: Forever DATASHEET Ambient Light Sensor - Surface Mount EAALSTIC1708A0 2. Storage (1) Do not open moisture proof bag before components are ready to use. (2) Before opening moisture proof bag, components should be kept at 30 or less and 90%RH or less. (3) Components should be used within a year. (4) After opened moisture proof bag, components should be kept at 30 or less and 70%RH or less. (5) Components should be used within 72 hours after opened moisture proof bag. (6) If the moisture absorbent material (silica gel) has faded away or the components have exceeded the storage time, baking treatment should be performed using the following conditions. (Baking treatment: 605 for 24 hours) ESD Precaution: Proper storage and handing procedures should be followed to prevent ESD damage to the devices especially when they are removed from the anti-static bag. Electro-Static Sensitive Devices warning labels are on the packing. Recommended solder profile Notice: 1. Reflow soldering should not be done more than two times. 2. When soldering, do not put stress on the devices during heating. 3. After soldering, do not warp the circuit board. 7 Copyright Revision : 1(c) 2014, Everlight Americas Inc. All Rights Reserved. Release Date : 12.17.2014. Release Issue No: DLS-0000131 Rev.1 LifecyclePhase: Date:2014-12-22 15:48:58.0 www.everlightamericas.com Expired Period: Forever DATASHEET Ambient Light Sensor - Surface Mount EAALSTIC1708A0 Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Repairing Repair should not be done after the device have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the device will or will not be damaged by repairing. Note: 1. Above specification may be changed without notice. Everlight Americas will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. Everlight Americas assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of Everlight Americas Inc. Please don't reproduce or cause anyone to reproduce them without Everlight Americas's consent. 8 Copyright Revision : 1(c) 2014, Everlight Americas Inc. All Rights Reserved. Release Date : 12.17.2014. Release Issue No: DLS-0000131 Rev.1 LifecyclePhase: Date:2014-12-22 15:48:58.0 www.everlightamericas.com Expired Period: Forever