M3SPD CONNECTION DIAGRAM DIAGRAMME DE CONNECTION SCHALTBILDANSCHLUSS MOUNTING DETAILS INSTRUCTIONS DE MONTAGE MONTAGEAUFUHRUNGEN FUSE FUSIBLE SICHERUNG 89 (excl. clips) 45 L Insert screwdriver to release clips INSTALLATION INSTALLATION INSTALLATION N 49 59 L N Withdraw clips fully when surface mounting M3SPD 93 (+/- 1mm) Width / largeur / Breite. 35 mm (DIN 43880) q q q q q * PROTECTS AGAINST OVER VOLTAGE TRANSIENTS INCORPORATES METAL OXIDE VARISTORS AND GAS DISCHARGE TUBE LONG WORKING LIFE FAST RESPONSE TIME DIN RAIL HOUSING (35mm) INSTALLATION AND SETTING q q q q q * * * BEFORE INSTALLATION, ISOLATE THE SUPPLY Connect the unit as shown in the diagram above. TECHNICAL SPECIFICATION MONTAGE ET MISE AU POINT q q q q q * * * * AVANT MONTAGE, ISOLER L ' ALIMENTATION Branchement comme indique dans le diagramme cidessus. FICHES TECHNIQUES SCHUTZ GEGEN VORUBERGEHENDE UBERSPANNUNG EINGEBAUT SIND METALLOXID VARISTORE UND GASENTLADUNGSROHRE LANGE GEBRAUCHSDAUER SCHNELLE ANSPRECHZEIT DIN SCHIENENGEHAUSE (35mm) EINBAU UND EINSTELLUNG Installation Arbeit mu von qualifiziertem Personal durchgefuhrt werden. Des travaux d'installation doivent etre menes a bien par le personnel qualifie. Installation work must be carried out by qualified personnel. * PROTEGE CONTRE LES SURTENSIONS TRANSITOIRES INCORPORE DES VARIATEURS A OXYDE METALLIQUE OU DES TUBES A DECHARGE LONGUE DUREE DE VIE DE FONCTIONNEMENT TEMPS DE REPONSE RAPIDE LOGEMENT DU RAIL DIN (35mm) * * * VOR EINBAU DIE STROMVERSORGUNG ISOLIEREN Stromversorgung anschliessen wie im Schaltbild unten angezeigt. TECHNISCHE DATEN Supply/monitoring voltage Un: Supply variation: 220 / 240V AC/DC (AC: 50 - 60Hz) 0.90 - 1.10 x Un Voltage d ' alimentation controlee Un: Variation d ' alimentation: 220 / 240V AC/DC (AC: 50 - 60Hz) 0.90 - 1.10 x Un Stromversorgung / Spannungskontrolle Un: Wechselversorgung: 220 / 240V AC/DC (AC: 50 - 60Hz) 0.90 - 1.10 x Un Current rating: 16A (when used with suitable Miniature Circuit Breaker) 100A @ 250V AC 25nS < 5nF @ 1kHz > 1000 M (applicable to metal oxide varistors only) Mesure des courants: 16A (Quand utilise avec les coupeurs de circuits miniatures adaptes) 100A @ 250V AC 25nS < 5nF @ 1kHz > 1000 M (applicable seulement aux variateurs a oxyde metallique) Nennstrom: 16A (wenn mit geeigneten Miniatur Stromunterbrecher benutzt) 100A @ 250V AC 25nS < 5nF @ 1kHz > 1000 M (Nur fur Metalloxid Varistore geeignet) Leakage current: Response time: Capacitance: Insulation resistance: Voltage temperature co-efficient: Max. clamping voltage: (with current waveform 1.2 / 50S - Short circuit current 100A 10A) Transient withstand capacity: - 0.05% / C (applicable to metal oxide varistors only) 900V (Phase / neutral) 1300V (Phase / earth) x 5 @ 5kA (Phase / neutral) x 3 @ 5kA (Phase / earth) (8 / 20S waveform) Courant de fuite: Temps de response: Capacitance: Resistance d'isolation: Coefficient voltage temperature: - 0.05% / C (applicable seulement aux variateurs a oxyde metallique) Voltage maximum d'accrochage: 900V (Phase / neutre) (avec la forme d'onde 1300V (Phase / de terre) courante 1.2 / 50S - courant de court-circuit 100A 10A) Capacite de resistance transitoire: x 5 @ 5kA (Phase / neutre) x 3 @ 5kA (Phase / de terre) (Forme d'onde de 8 / 20S) Ambient temperature: Relative humidity: -20 to +60C +95% Temperature ambiante: Humidite relative: -20 a +60C +95% Housing: Weight: Mounting option: to UL94 VO 100g to BS5584:1978 (EN50 002, DIN 46277-3) Boitier: Poids: Option de montage: a UL94 VO 100g a BS5584:1978 (EN50 002, DIN 46277-3) Terminal conductor size: 2 x 2.5mm solid /stranded 2 The information provided in this literature is believed to be accurate (subject to change without prior notice); however, use of such information shall be entirely at the user's own risk Taille du conducteur terminal: 2 x 2.5mm toron / multi-filaire 2 Les indications contenues dans ce document sont exactes (sous reserve de changement sans avis prealable) toutefois aux risques et perils de l ' utilisateur Kriechstrom: Ansprechzeit: Kapazitanz: Isolationswiderstand: Spannungstemperatur Koeffizient: - 0.05% / C (Nur fur Metalloxid Varistore geeignet) 900V (Phase / neutral) 1300V (Phase / Erde) Maximale Klemmspannung: (mit Stromwellenform von 1.2 / 50S - Kurzschluss Strom 100A 10A) Vorubergehende Widerstands Kapazitat: x 5 @ 5kA (Phase / neutral) x 3 @ 5kA (Phase / Erde) (Wellenform von 8 / 20S) Umgebungstemperatur: Allgemeiner Feuchtigkeitsgehalt: -20 bis +60C Gehause: Gewicht: Befestigungswahl: bis UL94 VO 100g bis BS5584:1978 (EN50 002, DIN 46277-3) Anschlussklemme / Kabelgrosse: +95% 2 x 2.5mm2 Festdraht / Litze Es handelt sich in diesen Unterlagen um uns genau bekannte Angaben, (Anderungen vorbehalten) jedoch diese Anderungen laufen auf eigene Gefahr des Benutzers. M3SPD-1-B Broyce Control Ltd., Pool Street, Wolverhampton, West Midlands WV2 4HN. England H+44 (0) 1902 773746 G+44 (0) 1902 420639 Email: sales@broycecontrol.com Web: http://www.broycecontrol.com