ES1A THRU ES1J
SURFACE MOUNT SUPERFAST RECTIFIER
VOLTAGE - 50 to 600 Volts CURRENT - 1.0 Ampere
l For surface mounted applications
l Low profile package
l Built-in strain relief
l Easy pick and place
l Superfast recovery times for high efficiency
l Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
l Glass passivated junction
l High temperature soldering:
260 ¢J/10 seconds at terminals
Case: JEDEC DO-214AC molded plastic
Terminals: Solder plated, solderable per
MIL-STD-750, Method 2026
Polarity: Indicated by cathode band
Standard packaging: 12mm tape (EIA-481)
Weight: 0.002 ounce, 0.064 gram
Ratings at 25 ¢J ambient temperature unless otherwise specified.
Single phase, half wave 60Hz resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage V
Maximum RMS Voltage V
Maximum DC Blocking Voltage V
Maximum Average Forward Rectified Current,
at TL=120 ¢J I
1.0Amp
Peak Forward Surge Current 8.3ms single half sine-
wave superimposed on rated load(JEDEC method)I
30.0Amp
Maximum Instantaneous Forward Voltage at 1.0A V
0.95 1.25 1.7Volts
Maximum DC Reverse Current TA=25 ¢J
At Rated DC Blocking Voltage TA=100 ¢J I
5.0
100 £g A
Maximum Reverse Recovery Time (Note 1)T
35.0nS
Typical Junction capacitance (Note 2)C
10.0
F
Typical Thermal Resistance (Note 3)R£KJL 35 ¢J/
Operating and Storage Temperature Range T
,T
-50 to +150 ¢J
NOTES:
1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Irr=0.25A
2. Measured at 1 MHz and Applied reverse voltage of 4.0 volts
3. 8.0mm2 (.013mm thick) land areas