PT6KV-103A2020 - PIHER SENSOR CONTROLS

Electrical rotation angle

Torque

Life*

rotational

stop 0.2 to 2 Ncm.

(0.3 to 2.7 in - oz)

Mechanical rotation angle 235° ± 5°

200° ± 20°

Up to 10K cycles

Range of values * 220 Rn 5M (Decad. 1.0 - 2.0 - 2.2 - 2.5 - 4.7 - 5.0)

Tolerance *

Max. voltage

Nominal power 50°C (122°F) (see power rating curve)

100 VDC (lin) 50 VDC (no lin)

± 20%

± 30%

0.1 W (lin) 0.05 W (no lin)

220 Rn 1M

1M Rn 5M

Taper * Lin; Log; Alog (Log. & Alog. only Rn > 1K)

Residual resistance*

Equivalent noise resistance

0.5% Rn (5 min.)

3% Rn (3 min.)

Operating temperature ** -25°C to +70°C (-13°F to + 158°F)

* Others: check availability.

** Up to 85°C depending on application.

Stop torque > 4 Ncm.(>5.6 in-oz)

Piher Sensing Systems

Potentiometers | Hall effect contactless sensors | Inductive sensors

Printing electronics | Value added assemblies

Main features

- Carbon resistive element.

- IP54 protection according to IEC

60529.

- Polyester substrate.

-SMD version available (see PS-6

datasheet).

-Wiper positioned at initial, 50%

or fully clockwise.

- Also upon request:

• Supplied in magazines for

automatic insertion.

• Long life model (10K cycles).

• Housing available in self

extinguishable plastic (UL94V0).

• Mechanical detents.

Description

Mechanical specifications

Electrical specifications

The PT-6 potentiometer offers

control where frequent

adjustment is required. The

shaftless design allows for

employment of different

engagement mechanisms, such a s

a customized shaft, a motor

control or a human interface

adjustment.

This potentiometer can also

control v ariable output s including

frequency, change in motor speed

or volume.

Typical applications include test

and measurement equipment,

consumer electronics, appliance s,

timer relays, robotics, motion

controllers, home and building

automation and medical

equipment control panels.

This datasheet shows you the

basics of the PT-6 potentiometer

that is quite versatile and easy to

taylor. Do not hesitate to contact

Piher for advice.

Automotive / Appliance control

ISO 14001

BUREAU VERITAS

Certification Pb

6 mm carbon potentiometer

PT-6

-Page 1 of 6-

Piher Sensing Systems

Potentiometers | Hall effect contactless sensors | Inductive sensors

Printing electronics | Value added assemblies

6 mm carbon potentiometer

PT-6

Automotive / Appliance control

How to order Optional extras

Online product configurator: https://piher.net/configurator/2017/08/24/pt6-6-configurator-potentiometer/

Rotors

(See note 1)

PT-6

Series

Value

Taper

A = Lin.

B = Log.

C = Alog.

Detents

Life

E= 10 K cycles

2020

Tolerance

3030 = ± 30%

2020 = ± 20%

1010 = ± 10%

0505 = ± 5%

-=none

P04

P06

P08

P10

000 = CM

221 = 220

Mounting method

--- -

Standard default options

How to order examples

Crimping

Yes

Packing Bulk

Rotor colour White

Wiper

send

position Initial

Knob colour

White

Mechanical l

ife 1000 cycles

221

505 = 5M

(See note 4)

H = Horizontal adjust

V = Vertical adjust

NOTES:

(3) Tolerance (non standard, custom): check availability............

Negative tolerance

Positive tolerance

Code eg.: 07 05

+ 7

– 5

000 = CM = switch SPDT version (contact us por further information)–

(2) Value: Code: 22 1 =

Number of zeros

First two digits.

–

(1) «X» is only available with horizontal adjusting method.

Adjust. type:

Potentiometer without knob or shaft, only the rotor. Potentiometer with knob or shaft, only the knob/shaft.

The default colour for the knob and rotor is white.

(6)

(5) Only for “V” mounting method. “W” rotor with shaft Fig. 2 is not available in magazines .

PT6KH-103A2020

6mm potentiometer with rotor “K” (cross shape), H mounting method

(horizontal adjustment), 10K resistive value, 20% resistive tolerance and

crimped terminals.

PT6WV-104A1010-5NE-SC

6mm potentiometer with factory pre-inserted knob, V mounting method

(vertical adjustment), 100K resistive value, 10% resistive tolerance,black knob

ref. 6148 and straight terminals (not crimped).

- = 1K cycles - = White

Packaging

- = Bulk

T = Magazines

-- -

- = Initial

PM = 50%

PF = Final

Wiper position

Crimping

AM = Yellow

AZ = Blue

CR = Cream

GR = Grey

IN = Not coloured

NE = Black

RO = Red

VE = Green

(4) Life: • Standard = 1000 cycles • Long = 10K cycles (non-detented models)

SC = Not crimped

- = Crimped terminals

SPDT. function

45°

-Page 2 of 6-

(See note 2)

(See note 6)

Shaft/Knob

01 = Fig.1

02 = Fig. 2

03 = Fig. 3

04 = Fig. 4

05 = Fig. 5

(See note 3)

Knob/rotor

colour

Resistance 100 200 220 250 470 500 1K 2K 2.2K 2.5K 4.7K 5K 10K 20K 22K 25K 47K 50K 100K 200K 220K 250K 470K 500K 1M 2M 2.5M 4.7M 5M

How to order code 101 201 221 251 471 501 102 202 222 252 472 502 103 203 223 253 473 503 104 204 224 254 474 504 105 205 255 475 505

Standard tolerance 30% 20% 30%

(See note 5)

0.65

1.85

+0.07

±0.05

-0.03

1.4

±0.05

0.6

1.8

±0.1

1.5

±0.05

0.7

0.6

1.8

±0.1

±0.05

4.3

±0.

1.8

0.6

4.3

±0.05

Piher Sensing Systems

Potentiometers | Hall effect contactless sensors | Inductive sensors

Printing electronics | Value added assemblies

6 mm carbon potentiometer

PT-6

Automotive / Appliance control

Rotors

H = vertical mounting – horizontal adjustment

Mounting methods. Dimensions

V = horizontal mounting – vertical adjustment

A E

2.5 2.5

2.5

0.9

+0.1

0.7

3.3

±0.05

3.5

2.5

6.3

1.8

0.6

+0.1

0.9

2.5

4.5

3.5

6.3

2.5

1.8

0.6

Cross slot thru hole

Cross slot thru hole M

Hexagonal thru hole

Cross slot thru hole

X = Adjustable from collector side

0.7

W = Adjustable from terminal side

-Page 3 of 6-

Default delivery is at

initial position.

Wipers are shown

positioned at 50%

for the picture.

With inserted

knob / shaft.

Default knob is

ref. 5155 white.

6 mm carbon potentiometer

PT-6

Piher Sensing Systems

Potentiometers | Hall effect contactless sensors | Inductive sensors

Printing electronics | Value added assemblies

Automotive / Appliance control

SMD versions

This is the default terminals type.

Not-crimped terminals dimensions

Please indicate “SC” at the end of the part number for this version.

Detents / stop positions

SMD / SMT version a vailable. See PS-6 and N-6 data sheets at: www .piher.net

A = Linear

B = Log.

C = Alog. C

Standard Tapers

Collector (S) 0.30

Terminals 0.25

1.6

3.3

0.8

Crimped terminals (detail A)

3.3

7.5

0.3

0.25

0.7

3.5

Detents details

Relative detent positions

along the mechanical

travel.

P08

P06P04

P10

Others: check availability. Unless otherwise specified the detents

are evenly spaced (using the end points as reference).

For more than 10 detents versions please contact Piher

for more information.

All detented versions will be studied case by case.

Contact Piher for leadtimes and availability.

Detent torque can vary from 1.2 to 2.5 times the standard

potentiometer torque.

Long life versions are available under request. Contact Piher

for more information.

Standard mechanical life: 100 cycles.

(2)

(1)

(4)

(5)

(3)

-Page 4 of 6-

NOTES FOR DETENTED VERSIONS

Download the STEP file here:

https://piher.net/piher/?p=894

Piher Sensing Systems

Potentiometers | Hall effect contactless sensors | Inductive sensors

Printing electronics | Value added assemblies

6 mm carbon potentiometer

PT-6

Automotive / Appliance control

Knobs/Shafts

By default shafts, knobs & thumweels are delivered unassembled.

Mounted shafts, knobs & thumbweels are delivered at random position. Custom positioning available.

If you wish to use your own plastic shaft/knob/actuator please contact Piher for advice about compatible materials.

50%

±15°

INITIAL

CCW FINAL

2.6

3.8

6.3

3.3

2.2

0.8

13.30

1.50

2.90

Default position = CCW

6.5

3.8

2.2

6.3

3.85

2.5

17.5

6.3

4.3

3.4

2.35

0.8

2.2

1.2

1.87

R 1

Dual gang version . Ref 6060

6.5

6.3

2.2

3.8

0.8

5.5

Colour: grey. For other colours check availability.

Default knob. Standard colour: white. Shaft. Not suitable for magazine packaging

Positioning

Ref.: 6160 / Fig. 6

Ref.: 6148 / Fig. 5

Ref.: 5141 / Fig. 3 Ref.: 6172 / Fig. 4

Ref.: 5155 / Fig. 1 Ref.: 6132 / Fig. 2

6.3

4.3

2.54

R 1

0.64

1.87

2.2

1.2

-Page 5 of 6-

The product information in this catalogue is for reference purposes. Please contact Piher for the most up to date and accurate design

information.

Piher Sensors & Controls S.A., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Piher ”),

disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any

product described herein.

Piher disclaims any and all liability arising out of the use or application of any product described herein or of any information provided

herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Piher ’s terms and

conditions of sale, including but not limited to the warranty expressed therein, which apply to these products.

No licence, expre ss or implie d, by e s toppel or otherwise, to any intellectual property rights is gr ant e d by this documen t or by an y c onduct

of Piher.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly

indicated. Customers using or selling Piher products not expressly indicated for use in such applications do so entirely at their own risk

and agree to fully indemnify Piher for an y damag es arising or resulting from such use or sale. Please con tact authorised Piher personnel

to obtain written terms and conditions regarding products designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.

Information contained in and/or attached to this catalogue may be subject to export control regulations of the European Community,

USA, or other countries. E ach r ecipien t of this document is r e sponsible to ensur e that usag e and/ or tr ans fer of any information cont aine d

in this document complies with all relevant export control regulations. If you are in any doubt about the export control restrictions that

apply to this information, please contact the sender immediately. For any Piher Exports, Note: All products / technologies are EAR99

Classified commoditie s. Export s from the Unit ed States are in accor dance with the Export Adminis tration Regulations. Diversion con trary

to US law is prohibited.

Piher is an AmphenolTM company.

All Piher products can be adapted to meet customer´s requirements.

Please always use the latest updated datasheets and 3D models published at our website www.piher.net.

Piher potentiometer’s

recommended connection circuit

for a position sensor or control

application.

(voltage divider circuit electronic

design)

Piher Sensing Systems

Polígono Industrial Municipal

Vial T2 Nº22

31500 Tudela - Spain

Tel: +34-948-820450

sales@piher.net

www.piher.net

6 mm carbon potentiometer

PT-6

Piher Sensing Systems

Potentiometers | Hall effect contactless sensors | Inductive sensors

Printing electronics | Value added assemblies

Automotive / Appliance control

Disclaimer

Recommended

connections

Pow er r ating curve

Contact

50 70

100

(%)

Units per box

BOXES / BULK

All

Model 1.000

Box dimensions (mm):

185x85x40

±5 %

±3 % (Rn < 1 M )

±300 ppm (Rn <100 K)

±2.5 %

±5 %

±2 %

Electrical life

Mechanical life (cycles)

Temperature coefficient

Thermal cycling

Damp heat

Vibration (for each plane,X,Y,Z)

Tests

1.000 h. @ 50° C; 0.25 W

1000 @ 10 CPM ...15 CPM

–25° C; +70° C

16 h. @ 85° C; 2h. @ -25° C

500 h. @ 40° C @ 95% HR

2 h. @ 10 Hz. ... 55 Hz.

Typical variations

Out of range values may not comply these results

Packaging

-Page 6 of 6-

530

Magazines for PT-6 V with or without crimping.

530

AUTOMATIC INSERTION

80 Pieces

Units per magazine

PT-6 V & PT-6 WV

Magazines

RAD

RL 100 x R

VCC

Noise filter.

Ground.