Automotive / Appliance control 6 mm carbon potentiometer PT-6 Main features - Carbon resistive element. - IP54 protection according to IEC 60529. - Polyester substrate. -SMD version available (see PS-6 datasheet). -Wiper positioned at initial, 50% or fully clockwise. - Also upon request: * Supplied in magazines for automatic insertion. * Long life model (10K cycles). * Housing available in self extinguishable plastic (UL94V0). * Mechanical detents. Mechanical specifications Description Mechanical rotation angle 235 5 Electrical rotation angle 200 20 Torque The PT-6 potentiometer offers control where frequent adjustment is required. The shaftless design allows for employment of different engagement mechanisms, such as a customized shaft, a motor control or a human interface adjustment. 0.2 to 2 Ncm. (0.3 to 2.7 in - oz) rotational stop Stop torque > 4 Ncm.(>5.6 in-oz) Life* Up to 10K cycles Electrical specifications Range of values * Tolerance * 220 1M 220 Rn 1M Rn 5M Rn 5M (Decad. 1.0 - 2.0 - 2.2 - 2.5 - 4.7 - 5.0) 20% 30% Max. voltage 100 VDC (lin) 50 VDC (no lin) Nominal power 50C (122F) (see power rating curve) 0.1 W (lin) 0.05 W (no lin) Taper * Lin; Log; Alog (Log. & Alog. only Rn > 1K) Residual resistance* 0.5% Rn (5 Equivalent noise resistance 3% Rn (3 Operating temperature ** min.) min.) -25C to +70C (-13F to + 158F) * Others: check availability. ** Up to 85C depending on application. ISO 14001 BUREAU VERITAS Certification Pb Piher Sensing Systems Potentiometers | Hall effect contactless sensors | Inductive sensors Printing electronics | Value added assemblies -Page 1 of 6- This potentiometer can also control variable outputs including frequency, change in motor speed or volume. Typical applications include test and measurement equipment, consumer electronics, appliances, timer relays, robotics, motion controllers, home and building automation and medical equipment control panels. This datasheet shows you the basics of the PT-6 potentiometer that is quite versatile and easy to taylor. Do not hesitate to contact Piher for advice. Automotive / Appliance control 6 mm carbon potentiometer PT-6 How to order Optional extras PT-6 V K Series Rotors A K M Q W X - 221 2020 - A - - - Mounting method Taper Life Packaging H = Horizontal adjust A = Lin. B = Log. C = Alog. - = 1K cycles E= 10 K cycles - = Bulk T = Magazines (See note 4) (See note 5) V = Vertical adjust Value 221 = 220 000 = CM 3030 = 30% 2020 = 20% 1010 = 10% 0505 = 5% (See note 2) (See note 3) (See note 1) 505 = 5M NOTES: (1) Tolerance - Wiper position Knob/rotor colour Detents Shaft/Knob -=none P04 P06 P08 P10 01 = Fig.1 02 = Fig. 2 03 = Fig. 3 04 = Fig. 4 05 = Fig. 5 - = Initial PM = 50% PF = Final - = White AM = Yellow AZ = Blue CR = Cream GR = Grey IN = Not coloured NE = Black RO = Red VE = Green Crimping - = Crimped terminals SC = Not crimped (See note 6) Adjust. type: X is only available with horizontal adjusting method. (2) Value: - Code: 22 1 = Resistance 100 200 220 250 470 500 1K How to order code 101 201 221 251 471 501 102 202 222 252 2K 2.2K 2.5K 4.7K 5K 472 30% 45 Number of zeros First two digits. - 000 = CM = switch SPDT version (contact us por further information) Standard tolerance - SPDT. function 10K 20K 22K 25K 47K 50K 100K 200K 220K 250K 470K 500K 502 103 203 223 253 473 503 104 204 224 254 474 504 1M 2M 2.5M 4.7M 5M 105 205 255 505 20% 475 30% check availability............ + 7 = 07 -5 05 (3) Tolerance (non standard, custom): (4) Life: * Standard = 1000 cycles (5) Only for "V" mounting method. "W" rotor with shaft Fig. 2 is not available in magazines . (6) Potentiometer without knob or shaft, only the rotor. Potentiometer with knob or shaft, only the knob/shaft. The default colour for the knob and rotor is white. Code eg.: Negative tolerance Positive tolerance * Long = 10K cycles (non-detented models) Online product configurator: https://piher.net/configurator/2017/08/24/pt6-6-configurator-potentiometer/ How to order examples Standard default options PT6KH-103A2020 Mechanical life 1000 cycles 6mm potentiometer with rotor "K" (cross shape), H mounting method (horizontal adjustment), 10K resistive value, 20% resistive tolerance and crimped terminals. Crimping Yes Packing Bulk Rotor colour White PT6WV-104A1010-5NE-SC Wiper send position Initial 6mm potentiometer with factory pre-inserted knob, V mounting method (vertical adjustment), 100K resistive value, 10% resistive tolerance,black knob ref. 6148 and straight terminals (not crimped). Knob colour White Piher Sensing Systems Potentiometers | Hall effect contactless sensors | Inductive sensors Printing electronics | Value added assemblies -Page 2 of 6- Automotive / Appliance control 6 mm carbon potentiometer PT-6 Rotors +0.07 -0.03 0.05 0.05 0.65 1.85 1.4 Q K 6 Cross slot thru hole Hexagonal thru hole 0.1 1.8 0.1 6 With inserted knob / shaft. 4.3 4.3 0.6 0.6 1.8 A M Cross slot thru hole Cross slot thru hole Default delivery is at initial position. Wipers are shown positioned at 50% for the picture. 1.5 0.05 0.1 0.1 0.6 1.8 Default knob is ref. 5155 white. 0.7 0.05 0.7 X = Adjustable from collector side 0.05 W = Adjustable from terminal side Mounting methods. Dimensions 1.8 V = horizontal mounting - vertical adjustment 0.6 4 6.3 0.9 S +0.1 2.5 2.5 5 A 3.3 2.5 2.5 0.7 2.5 2.5 A 3.5 E 0.05 2.5 2.5 H = vertical mounting - horizontal adjustment 3.5 6.3 1.8 +0.1 5 4.5 0.6 0.9 A 2.5 2.5 2.5 2.5 Piher Sensing Systems Potentiometers | Hall effect contactless sensors | Inductive sensors Printing electronics | Value added assemblies -Page 3 of 6- Automotive / Appliance control 6 mm carbon potentiometer PT-6 Download the STEP file here: https://piher.net/piher/?p=894 Not-crimped terminals dimensions Crimped terminals (detail A) 4 3.5 3.3 1.6 0.3 3.3 X 0.25 0.25 Terminals X 7.5 Collector (S) 0.30 0.8 0.7 Please indicate "SC" at the end of the part number for this version. This is the default terminals type. SMD versions Standard Tapers SMD / SMT version available. See PS-6 and N-6 datasheets at: www.piher.net A = Linear B = Log. C = Alog. C A B Detents / stop positions Relative detent positions along the mechanical travel. P04 P06 P08 P10 Detents details NOTES FOR DETENTED VERSIONS (1) All detented versions will be studied case by case. Contact Piher for leadtimes and availability. (2) Others: check availability. Unless otherwise specified the detents are evenly spaced (using the end points as reference). For more than 10 detents versions please contact Piher for more information. (3) Standard mechanical life: 100 cycles. (4) Long life versions are available under request. Contact Piher for more information. (5) Detent torque can vary from 1.2 to 2.5 times the standard potentiometer torque. Piher Sensing Systems Potentiometers | Hall effect contactless sensors | Inductive sensors Printing electronics | Value added assemblies -Page 4 of 6- Automotive / Appliance control 6 mm carbon potentiometer PT-6 Knobs/Shafts By default shafts, knobs & thumweels are delivered unassembled. Mounted shafts, knobs & thumbweels are delivered at random position. Custom positioning available. If you wish to use your own plastic shaft/knob/actuator please contact Piher for advice about compatible materials. Ref.: 5155 / Fig. 1 Default knob. Standard colour: white. Ref.: 6132 / Fig. 2 Shaft. Not suitable for magazine packaging 13.30 6.3 6 10 1 4.3 1.87 0.64 2.90 2.54 1.50 2 1.2 5 5 2.2 R1 Ref.: 5141 / Fig. 3 Colour: grey. For other colours check availability. Ref.: 6172 / Fig. 4 Colour: grey. For other colours check availability. 6.3 3.8 6 4.3 3.4 6 3.3 6.3 2.35 0.8 2.6 0.8 2.2 2.2 1.2 R1 1.87 Ref.: 6160 / Fig. 6 Ref.: 6148 / Fig. 5 2 6.5 6.5 6.3 3.85 6.3 3.8 0.8 5.5 3.8 2.2 2.2 Positioning 17.5 Default position = CCW 50% INITIAL CCW 5 15 FINAL CW 2.5 5 Piher Sensing Systems Potentiometers | Hall effect contactless sensors | Inductive sensors Printing electronics | Value added assemblies -Page 5 of 6- Dual gang version . Ref 6060 Automotive / Appliance control 6 mm carbon potentiometer PT-6 Packaging Recommended connections BOXES / BULK Units per box All 1.000 Magazines for PT-6 V with or without crimping. 530 8 Model Piher potentiometer's recommended connection circuit for a position sensor or control application. (voltage divider circuit electronic design) VCC 530 13 Box dimensions (mm): 185x85x40 E S R AD 8 AUTOMATIC INSERTION Magazines Units per magazine PT-6 V & PT-6 WV 80 Pieces A RL C Noise filter. Ground. RL 100 x R Tests Typical variations Electrical life 1.000 h. @ 50 C; 0.25 W 5 % Mechanical life (cycles) 1000 @ 10 CPM ...15 CPM 3 % (Rn < 1 M ) Temperature coefficient -25 C; +70 C 300 ppm (Rn <100 K) Thermal cycling 16 h. @ 85 C; 2h. @ -25 C 2.5 % Damp heat 500 h. @ 40 C @ 95% HR 5 % Vibration (for each plane,X,Y,Z) 2 h. @ 10 Hz. ... 55 Hz. 2 % Power rating curve W (%) 100 % 40 % 50 Out of range values may not comply these results Disclaimer 70 Contact The product information in this catalogue is for reference purposes. Please contact Piher for the most up to date and accurate design information. Piher Sensors & Controls S.A., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Piher"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product described herein. Piher disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Piher's terms and conditions of sale, including but not limited to the warranty expressed therein, which apply to these products. No licence, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Piher. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Piher products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Piher for any damages arising or resulting from such use or sale. Please contact authorised Piher personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Information contained in and/or attached to this catalogue may be subject to export control regulations of the European Community, USA, or other countries. Each recipient of this document is responsible to ensure that usage and/or transfer of any information contained in this document complies with all relevant export control regulations. If you are in any doubt about the export control restrictions that apply to this information, please contact the sender immediately. For any Piher Exports, Note: All products / technologies are EAR99 Classified commodities. Exports from the United States are in accordance with the Export Administration Regulations. Diversion contrary to US law is prohibited. Piher is an AmphenolTM company. All Piher products can be adapted to meet customers requirements. Please always use the latest updated datasheets and 3D models published at our website www.piher.net. Piher Sensing Systems Potentiometers | Hall effect contactless sensors | Inductive sensors Printing electronics | Value added assemblies -Page 6 of 6- Piher Sensing Systems Poligono Industrial Municipal Vial T2 N22 31500 Tudela - Spain Tel: +34-948-820450 sales@piher.net www.piher.net C