0.5 W Conductive Plastic Potentiometers 392 Series, RV6 Series Datasheet 392 Series, RV6 Series 0.5 W Conductive Plastic Potentiometers Potentiometers convert rotary motion into a change of resistance, supplying a smooth transition of voltage or current levels. The resulting voltage output may be used to control position transducers in a wide variety of potential applications. The 392 Series and RV6 Series 0.5 W Plastic Potentiometers are economical devices designed to meet wave soldering process requirements for mounting to printed circuit boards (PCBs). All versions contain an internal shaft seal for moisture protection and comply with PCB washability test requirements and MIL-R-94 standards where appropriate. Termination types are PC pin or solder hook, both are solder-dipped. These small, single turn devices have a 3,18 mm [0.125 in] diameter shaft that is available in a range of lengths. Most configurations have either a standard or split locking 1/4-32 NEF-2A bushing in panel seal or no panel seal versions. The shaft/bushing materials are nickel-plated brass or thermoplastic. They are available in metal/metal, plastic/plastic, or a combination of the two. Custom designs are available upon request. The 392 Series and RV6 Series are available in resistances from 100 Ohm to 5 MOhm, inclusive. Tapers include linear, log, and antilog to meet a wide range of application requirements. RV6 Series devices meet requirements of MIL-R-94. Key Features and Benefits * Potential Applications Wave solderable: Allows the devices to be automatically INDUSTRIAL/COMMERCIAL soldered on a PCB using the wave soldering process instead * * results * Light switches PCB washable: Permits the PCB board containing the soldered * Hand-held equipment (e.g., multimeters and mobile monitoring devices) devices to be washed after soldering, saving time and yielding * * * , Audio and visual equipment (i.e., guitars, sound mixers, projectors) of being manually soldered, saving time and yielding consistent consistent results * Test and measurement equipment (e.g. oscilloscopes) Cost-effective: Supplies good performance at a reasonable * Communications equipment (e.g. walkie-talkies) price * Thermostats Wide range of resistance values (100 Ohm to 5 MOhm, inclusive): Promotes flexibility in the applications MeDical Small package size: Allows use where space contraints may * Hand-held equipment (e.g., mobile monitoring devices) be present * Laboratory and diagnostic equipment Table of Contents Transportation * Vehicle manual controls (e.g. joysticks) General Specifications. . . . . . . . . . . . . . . . . . 3-6 General Configuration Guide. . . . . . . . . . . . . . 7 392 Series: Specific Configurations. . . . . . . . . . . . . . . 8-10 Order Guides. . . . . . . . . . . . . . . . . . . . . . 11-21 RV6 Series: Specific Configurations. . . . . . . . . . . . . . . . 22 Order Guides . . . . . . . . . . . . . . . . . . . . . 23-27 Mounting Hardware . . . . . . . . . . . . . . back page Additional Information. . . . . . . . . . . . back page Wave solderable * washable * Cost-Effective 2 sensing.honeywell.com General Specifications Table 1. Electrical Specifications Parameter Characteristic 392 Series RV6 Series Maximum working voltage Dielectric strength Power rating: solder hook Taper 350 Vdc max. 750 Vac for 60 s at 1 mPa [atm], 350 Vac for 60 s at 11,5 kPa [3.4 inHg] 0.5 W at 70 C [158 F], derated to 120 C [248 F] 0.25 W linear (S), linear (special), log (Z), reverse log (RZ) CRV : linear tapers log, reverse log tapers linear (S), log (Z) 1 Resistance: linear tapers log, reverse log tapers Resistance tolerance: linear tapers: 100 Ohm to 1 MOhm >1 MOhm log, reverse log tapers: 500 Ohm to 250 kOhm >250 kOhm End resistance Linearity Electrical rotation: nominal effective 1.5% max. of total resistance 100 Ohm to 5 MOhm 500 Ohm to 2 MOhm 100 Ohm to 1 MOhm 500 Ohm to 1 MOhm 10% 20% 10% 20% 4 Ohm max. at each end of rotation 5% independent 265 (+0/-10) 295 (5) Contact resistance variation is the maximum momentary change in contact resistance that occurs when the wiper is moved from one location to another location. The larger this change, the more difficult it is to set the trimmer potentiometer and the more unstable the long term setting will be. 1 sensing.honeywell.com 3 General Specifications Table 2. Mechanical Specifications Parameter Characteristic 392 Series Shaft: diameter material: metal plastic Bushing: diameter/thread size material: metal plastic Termination base material Termination types: solder hook material PC pin: PCB fit material Cover material RV6 Series 3,18 mm [0.125 in] nickel-plated brass thermoplastic 1/4-32 NEF-2A nickel-plated brass thermoplastic thermoset plastic brass, solder (tin-lead) dip finish 2,54 mm [0.100 in] grid spacing, 0,86 mm [0.034 in] holes brass, solder (SAC305) dip finish stainless steel Housing material thermoplastic Base material Mounting hardware material: jam nut mounting nut lock washer panel O-ring Sealant thermoset nickel-plated brass nickel-plated brass nickel-plated phospher bronze Buna-N epoxy Operating torque 3,5 mN m to 14 mN m [0.5 in-oz to 2.0 in-oz] Stop torque Weight (approx.): metal shaft and metal bushing plastic shaft and plastic bushing 34 N m [3 in-lb] 7,09 g [0.25 oz] 2,84 g [0.1 oz] Table 3. Environmental Specifications Parameter Characteristic 392 Series RV6 Series Operating temperature -55 C to 120 C [-67 F to 248 F] Base material -40 C to 120 C [-40 F to 248 F] Rotational life tested to 50,000 cycles Soldering MIL-R-94 -- Table 4. Maximum Percent Temporary Resistance from 25 C [77 F] Nominal Resistance 4 Temperature -55 C [-67 F] -40 C [-40 F] 0 C [32 F] 25 C [77 F] 55 C [131 F] 85 C [185 F] 120 C [248 F] 100 Ohm 5.0 4.0 1.5 0 1.5 2.0 3.5 10 kOhm +7.0 +5.5 +2.0 0 1.5 2.5 5.5 100 kOhm +8.0 +6.0 +2.5 0 2.0 3.5 6.0 1 MOhm +10.0 +8.0 +3.0 0 2.5 4.0 7.5 sensing.honeywell.com General Specifications Figure 1. Power Derating Curve 100 90 80 Rated Power (%) 70 60 50 40 30 20 10 0 0 10 20 30 40 50 60 70 80 Temperature (C) 90 100 110 120 Figure 2. Recommended Wave Solder and Board Wash Parameters Blow dry Wave solder Fluxing Wash and rinse Preheat 345 Bake dry 305 Temperature (F) 265 225 185 145 105 65 0 1 2 3 4 5 Time (Minutes) 6 7 8 Process Limits Temperature Time Preheat, max. 91 C [195 F] 1 min. 288 C [550 F] -- 22 C [72 F] -- Wash 66 C to 71 C [150 F to 160 F] 1.5 min. Dry 47 C to 104 C [116 F to 220 F] 2 min. Solder, max. Differential after solder in wash (3/4T), max. sensing.honeywell.com 5 General Specifications Figure 3. Electrical Taper Diagrams (For reference only.) Linear (S) The change in resistance is directly proportional to the degree of rotation (right-hand or left-hand). Linear (Special) Attains 50% resistance value at 50% of clockwise rotation (left-hand). 90 90 80 80 Total Resistance (%) 100 Total Resistance (%) 100 70 60 50 40 30 70 60 50 40 30 20 20 10 10 0 0 0 10 20 30 40 50 60 70 80 90 100 Angular Rotation, Clockwise Left to Right (%) Log (Z) Attains 10% resistance value at 50% of clockwise rotation (left-hand). 90 80 80 Total Resistance (%) 90 Total Resistance (%) 100 60 50 40 30 70 60 50 40 30 20 20 10 10 0 0 10 20 30 40 50 60 70 80 90 100 Angular Rotation, Clockwise Left to Right (%) Reverse Log (RZ) Attains 10% resistance value at 50% of clockwise rotation (right-hand). 100 70 0 0 10 20 30 40 50 60 70 80 90 100 Angular Rotation, Clockwise Left to Right (%) 0 10 20 30 40 50 60 70 80 90 100 Angular Rotation, Clockwise Left to Right (%) Figure 4. Functional Schematic C (Center) CW (Clock-Wise) L (Left) 6 sensing.honeywell.com R (Right) General Configuration Guide Figure 5. General Configuration Guide Fourth This figure (XXJul14) shows possible 392 Series and RV6 Series configurations. Not all combinations may be available, please contact Honeywell. See the Order Guides for each series on subsequent pages for currently available catalog listings. Resistance Product Series Bushing Type and Length 392 Series, Metal: RV6 Series 1/4-32 NEF-2A: 0.5 W Panel seal: Conductive Standard (6,35 mm [0.25 in]) Plastic Potentiometers Switch None Number Signifi- of Zeros that cant Follow Digit Shaft Length Shaft Type Metal: o3,18 mm [0.125 in]: Flatted 1 15,88 mm [0.625 in] 20 Ohm 2 Linear special 19,05 mm [0.75 in] 25 Ohm 3 22,23 mm [0.875 in] 50 Ohm 4 Log: 10% 1 5 31,75 mm [1.25 in] Split locking 50,8 mm [2.00 in] 20% 20% Reverse Log: 10% Termination Type No locating pins Solder hook One locating pin PC pin 20% 63,5 mm [2.50 in] Custom Custom Slotted Linear: 10% 0 15 Ohm 12,7 mm [0.50 in] (12,7 mm [0.50 in]) Anti-Rotation (AR) Locating Pin 10 Ohm 9,53 mm [0.325]1 Round Electrical Taper and Resistance Tolerance Two locating pins Applies to 6,25 mm [0.25 in] bushings only. 1 No panel seal: Standard Custom (6,25 mm [0.25 in]) Plastic: o3,18 mm [0.125 in]: Slotted Split locking Custom General 392 Series, RV6 Series Terminology (12,7 mm [0.50 in]) Jam nut Mounting nut Custom Lock washer O-Ring Unthreaded (6,25 mm [0.25 in]) Mounting hardware Locating pin Shaft Plastic: 1/4-32 NEF-2A: Standard Bushing Termination Trimmer Custom sensing.honeywell.com 7 392 Series Specific Configurations Table 5. 392 Series Metal Shaft and Metal Bushing Specific Configurations Shaft Type Bushing AR Type Pin Termination 392-A (See Table 392-A on p. 11.) panel 1 seal, flatted standard, and 6,35 mm 2 [0.25 in] solder hook 392-C (See Table 392-C on p. 12.) flatted no panel seal, 1 split, and locking, 2 12,7 mm [0.50 in] PC pin 392-E (See Table 392-E on p. 13.) no panel seal, flatted standard, 6,35 mm [0.25 in] 0 PC pin 392-G (See Table 392-G on p. 14.) no panel seal, flatted standard, 6,35 mm [0.25 in] 1 solder hook 392-I (See Table 392-I on p. 15.) no panel 1 seal, flatted, standard, and 6,35 mm 2 [0.25 in] 8 sensing.honeywell.com PC pin Configuration with Associated Hardware Shaft Type Bushing Type AR TerminPin ation 392-B (See Table 392-B on p. 11.) round no panel 1 seal, standard, and 6,35 mm 2 [0.25 in] solder hook 392-D (See Table 392-D on p. 12.) no panel seal, slotted standard, 6,35 mm [0.25 in] 1 PC pin 392-F (See Table 392-F on p 13.) no panel seal, slotted standard, 6,35 mm [0.25 in] 1 PC pin 392-H (See Table 392-H on p.14.) no panel seal, slotted standard, 6,35 mm [0.25 in] 1 solder hook 392-J (See Table 392-J on p.15.) no panel seal, slotted standard, 6,35 mm [0.25 in] 0 solder hook Configuration with Associated Hardware 392 Series Specific Configurations Table 5. 392 Series Metal Shaft and Metal Bushing Specific Configurations (continued) Shaft Type Bushing AR TerminType Pin ation 392-K (See Table 392-K on p. 16.) no panel 1 seal, slotted standard, and 6,35 mm 2 [0.25 in] PC pin 392-M (See Table 392-M on p. 17.) no panel seal, 1 unand slotted threaded, 2 6,35 mm [0.25 in] PC pin 392-O (See Table 392-O on p. 18.) no panel 1 seal, slotted standard, and 6,35 mm 2 [0.25 in] solder hook Configuration with Associated Hardware Shaft Type Bushing Type AR Pin Termination Configuration with Associated Hardware 392-L (See Table 392-L on p. 17.) no panel seal, slotted standard, 6,35 mm [0.25 in] 0 solder hook 392-N (See Table 392-N on p. 18.) no panel 1 seal, slotted standard, and 6,35 mm 2 [0.25 in] PC pin 392-P (See Table 392-P on p. 18.) no panel 1 seal, slotted standard, and 6,35 mm 2 [0.25 in] PC pin sensing.honeywell.com 9 392 Series Specific Configurations Table 5. 392 Series Plastic Shaft and Plastic Bushing Specific Configurations Shaft Type Bushing Type AR Pin Termination 392-Q (See Table 392-Q on p. 19.) no panel seal, standard, slotted 6,35 mm [0.25 in] length 2 10 trimmer, standard 0 sensing.honeywell.com Shaft Type Bushing Type AR Pin Termination 392-R (See Table 392-R on p 20.) solder hook 392-S (See Table 392-S on p. 21.) slotted Configuration with Associated Hardware PC pin no panel seal, standard, slotted 6,35 mm [0.25 in] length 0 PC pin Configuration with Associated Hardware 392 Series Order Guides Table 392-A Order Guide Dimensions Electrical Catalog Listing Resistance (Ohm) 392074M8792 10 k Resistance Tolerance (%) Taper A Flat Length (mm [in]) 10 S 4,78 [0.188] B Flat Width (mm [in]) C Shaft Length (mm [in]) D Bushing Length (mm [in]) 2,39 [0.094] 12,70 [0.500] 6,35 [0.250] RoHS Compliant Mounting Hardware yes unassembled Dimensional Drawing (For reference only: mm [in].) 3,97 Typ. [0.156] 2 Center 1,57 [0.062] 5,08 [0.200] 3 Right 16,66 Max. [0.656] 0,91 Max. [0.036] 11,51 [0.453] C Shown with 50% shaft rotation D o13,08 A [0.515] 2,03 Typ. [0.080] B 6,46 [0.254] 3X 2,24 Typ. [0.088] o3,18 45 [0.125] 1 Left Locating pin 1 1/4-32 NEF-2A 5,08 [0.200] Mounting surface 2X 0,64 [0.025] 90 Locating pin 2 Table 392-B Order Guide Dimensions Electrical Catalog Listing Resistance (Ohm) 392063M9270 10 k Resistance Tolerance (%) 10 Taper A Shaft Length (mm [in]) B Bushing Length (mm [in]) S 15,09 [0.594] 6,35 [0.250] RoHS Compliant Mounting Hardware yes unassembled Dimensional Drawing (For reference only: mm [in].) 2 Center 1,57 [0.062] 3,97 Typ. [0.156] 16,66 Max. [0.656] 0,89 Max. [0.035] 11,51 [0.453] A Shown with 50% shaft rotation o13,08 [0.515] B 2,03 Typ. [0.080] 3X 2,24 Typ. [0.088] 6,46 [0.254] 5,08 [0.200] 3 Right o3,17 1 Left 5,08 [0.200] 1/4-32 NEF-2A 2X 0,89 [0.035] Mounting surface [0.125] Locating pin 1 45 Locating pin 2 sensing.honeywell.com 11 392 Series Order Guides Table 392-C Order Guide Dimensions Electrical Catalog Listing 392050M7461 Resistance (Ohm) 2.5 M Resistance Tolerance (%) Taper 10 S A B C Flat Flat Shaft Length Width Length (mm [in]) (mm [in]) (mm [in]) 5,16 [0.203] 2,39 [0.094] D E RoHS Bushing Termination Compliant Length Length (mm [in]) (mm [in]) 18,26 [0.719] 12,70 [0.500] 14,30 [0.563] yes Mounting Hardware unassembled Dimensional Drawing (For reference only: mm [in].) 26,59 [1.047] 1,57 [0.062] 2 Center C 0,89 Max. [0.035] 11,91 Max. [0.469] E Shown with 50% shaft rotation o13,08 D [0.515] A B 5,08 [0.200] 3 Right 5,08 [0.200] o3,18 [0.125] 1 Left 2,03 Typ. [0.080] Locating pin 1 1/4-32 NEF-2A 3X o0,71 [0.028] 2X 0,89 [0.035] 1,02 [0.040] 45 90 Mounting surface Locating pin 2 Table 392-D Order Guide Dimensions Electrical Catalog Listing 392050M8789 Resistance Resistance Tolerance Taper (Ohm) (%) 10 k 10 RZ E A B C D RoHS Mounting Slot Slot Shaft Bushing Termination Compliant Hardware Length Depth Width Length Length (mm [in]) (mm [in]) (mm [in]) (mm [in]) (mm [in]) 0,79 0,79 12,70 6,35 14,30 yes unassembled [0.031] [0.031] [0.500] [0.250] [0.563] Dimensional Drawing (For reference only: mm [in].) 26,59 [1.047] E 2 Center Shown with 50% shaft rotation C 0,89 Max. [0.035] 11,91 Max. [0.469] o13,08 A D 1,57 [0.062] o3,18 [0.515] B 2,03 Typ. [0.080] [0.125] 6,46 [0.254] 5,08 [0.200] 3 Right 12 5,08 [0.200] 1 Left sensing.honeywell.com 3X o0,71 [0.028] 1/4-32 NEF-2A 0,89 [0.035] Mounting surface Locating pin 1 45 90 392 Series Order Guides Table 392-E Order Guide Dimensions Electrical Catalog Listing 392050M9605 Resistance (Ohm) 2.5 k Resistance Tolerance (%) Taper 10 S A B C D E RoHS Mounting Flat Flat Shaft Bushing Termination Compliant Hardware Length Width Length Length Length (mm [in]) (mm [in]) (mm [in]) (mm [in]) (mm [in]) 7,14 [0.281] 2,36 [0.093] 14,27 [0.562] 4,75 [0.187] 14,30 [0.563] yes unassembled Dimensional Drawing (For reference only: mm [in].) 2 Center 26,59 [1.047] 1,57 [0.062] E C 0,89 Max. [0.035] 11,91 Max. [0.469] Shown with 50% shaft rotation o13,08 A D [0.515] 5,08 [0.200] 3 Right 5,08 [0.200] 2,03 Typ. [0.080] B 6,46 [0.254] 1 Left o3,18 [0.125] 3X o0,71 [0.028] 45 1/4-32 NEF-2A 90 Mounting surface Table 392-F Order Guide Dimensions Electrical Catalog Listing 392050234617001 Resistance (Ohm) Resistance Tolerance (%) Taper 10 k 10 RZ A B C D E RoHS Mounting Slot Slot Shaft Bushing Termination Compliant Hardware Depth Width Length Length Length (mm [in]) (mm [in]) (mm [in]) (mm [in]) (mm [in]) 0,79 [0.031] 0,79 [0.031] 12,70 [0.500] 6,35 [0.250] 14,30 [0.563] no unassembled Dimensional Drawing (For reference only: mm [in].) 26,59 [1.047] 2 Center 1,57 [0.062] E Shown with 50% shaft rotation C 0,89 Max. [0.035] 11,91 Max. [0.469] o13,08 [0.515] A D o3,18 B 2,03 Typ. [0.080] [0.125] 6,46 [0.254] 5,08 [0.200] 3 Right 5,08 [0.200] 1 Left 3X o0,71 [0.028] 1/4-32 NEF-2A 2X 0,89 [0.035] Locating pin 1 45 90 Mounting surface Locating pin 2 sensing.honeywell.com 13 392 Series Order Guides Table 392-G Order Guide Dimensions Electrical Catalog Listing Resistance (Ohm) 392063M9549 15 k Resistance Tolerance (%) 10 Taper A Flat Length (mm [in]) B Flat Width (mm [in]) C Shaft Length (mm [in]) D Bushing Length (mm [in]) special 6,35 [0.250] 2,39 [0.094] 41,28 [1.625] 6,35 [0.250] RoHS Compliant Mounting Hardware yes unassembled Dimensional Drawings (For reference only: mm [in].) 16,66 Max. [0.656] 3,97 Typ. [0.156] 2 Center Shown with 50% shaft rotation C 2,03 Typ. [0.080] 0,89 Max. [0.035] 1,57 [0.062] 11,51 Max. [0.453] D o13,08 A [0.515] 6,46 [0.254] B 5,08 [0.200] 1 Left 3 Right o3,18 1/4-32 NEF -2A 3X 2,24 Typ. [0.088] 5,08 [0.200] Mounting surface 45 90 [0.125] Locating pin 1 0,89 [0.035] Table 392-H Order Guide Dimensions Electrical Catalog Listing Resistance Resistance Tolerance Taper (Ohm) (%) 392101M9437 2.5 k 10 S A Slot Depth (mm [in]) B Slot Width (mm [in]) C Shaft Length (mm [in]) 0,79 [0.031] 0,79 [0.031] 12,70 [0.500] D Bushing Length (mm [in]) 6,35 [0.250] RoHS Compliant Mounting Hardware yes unassembled Dimensional Drawing (For reference only: mm [in].) 16,66 Max. [0.656] 3,97 Typ. [0.156] 2 Center Shown with 50% shaft rotation 0,89 Max. [0.035] 11,51 Max. [0.493] 1,57 [0.062] C o13,08 [0.515] A D 3X 2,24 Typ. [0.088] B o3,18 2,03 Typ. [0.080] [0.125] 6,46 [0.254] 5,08 [0.200] 3 Right 14 1 Left 5,08 [0.200] sensing.honeywell.com 1/4-32 NEF-2A 2X 0,99 [0.039] Locating pin 1 45 90 Mounting surface Locating pin 2 392 Series Order Guides Table 392-I Order Guide Dimensions Electrical Catalog Listing Resistance (Ohm) Resistance Tolerance (%) Taper 392050M9173 10 k 10 Z 392050M9514 10 k 10 Z A Flat Length (mm [in]) B Flat Width (mm [in]) 11,91 [0.469] 15,47 [0.609] 2,39 [0.094] 2,39 [0.094] C D E RoHS Mounting Shaft Bushing Termination Compliant Hardware Length Length Length (mm [in]) (mm [in]) (mm [in]) 19,05 [0.750] 22,23 [0.875] 6,35 [0.250] 6,35 [0.250] 14,30 [0.563] 14,30 [0.563] yes unassembled yes unassembled Dimensional Drawing (For reference only: mm [in].) 26,59 [1.047] 1,57 [0.062] 2 Center E Shown with 50% shaft rotation C 11,91 Max. [0.469] 0,89 Max. [0.035] o13,08 [0.515] D A 0,94 [0.037] 2,03 Typ. [0.080] B 5,08 [0.200] 3 Right 5,08 [0.200] 1 Left o3,18 [0.125] 1/4-32 NEF-2A 3X o0,71 [0.028] Locating pin 1 45 90 Mounting surface 2X 0,89 [0.035] Locating pin 2 Table 392-J Order Guide Dimensions Electrical Catalog Listing Resistance (Ohm) 392063M9038 25 k Resistance Tolerance (%) Taper A Slot Depth (mm [in]) 10 S 0,79 [0.031] B Slot Width (mm [in]) C Shaft Length (mm [in]) D Bushing Length (mm [in]) 0,79 [0.031] 14,68 [0.578] 6,35 [0.250] RoHS Mounting Compliant Hardware yes unassembled Dimensional Drawing (For reference only: mm [in].) 2 Center 1,57 [0.062] 5,08 [0.200] 3 Right 1 Left 3,97 Typ. [0.156] 16,66 Max. [0.656] 0,89 Max. [0.035] 11,51 [ 0.453] C Shown with 50% shaft rotation o13,08 [0.515] D A o3,18 3X 2,24 Typ. [0.088] B 2,03 Typ. [0.080] [0.125] 6,46 [0.254] 5,08 [0.200] 45 1/4-32 NEF-2A 90 Mounting surface sensing.honeywell.com 15 392 Series Order Guides Table 392-K Order Guide Dimensions Electrical Catalog Listing Resistance (Ohm) Resistance Tolerance (%) Taper 392JA2.5MEG 2.5 M 20 S 392JA250 250 10 S 392JA2500 2.5 k 10 S 392JA5MEG 5M 20 S 392JA1MEG 1M 20 S 392JA100 100 10 S 392JA100K 100 k 10 S 392JA10K 10 k 10 S 392JA1K 1k 10 S 392JA250K 250 k 10 S 392JA25K 25 k 10 S 392JA500K 500 k 10 S 392JA50K 50 k 10 S 392JA5K 5k 10 S 392050M8964 50 k 20 S 392050M9492 5k 10 S 392050M9519 50 k 20 S 392050M0016 10 k 10 S 392050M8715 2k 20 S A B C D E RoHS Slot Slot Shaft Bushing Termination Compliant Depth Width Length Length Length (mm [in]) (mm [in]) (mm [in]) (mm [in]) (mm [in]) 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 15,88 [0.625] 15,09 [0.594] 25,40 [1.00] 22,23 [0.875] 15,88 [0.625] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 9.53 [0.375] 14,30 [0.563] Mounting Hardware no unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled no unassembled yes unassembled Dimensional Drawing (For reference only: mm [in].) 26,59 [1.047] 1,57 [0.062] 2 Center E C 0.89 Max. [0.035] 11,91 Max. [0.469] Shown with 50% shaft rotation o13,08 [0.515] A D B 2,03 Typ. [0.080] 6,46 [0.254] 5,08 [0.200] 3 Right 16 5,08 [0.200] 1 Left sensing.honeywell.com o3,18 3X o0,71 [0.028] 1/4-32 NEF-2A 2X 0,99 [0.039] [0.125] Locating pin 1 45 90 Mounting surface Locating pin 2 392 Series Order Guides Table 392-L Order Guide Dimensions Electrical Catalog Listing Resistance (Ohm) 392101M9524 100 Resistance Tolerance (%) 10 Taper A Slot Depth (mm [in]) B Slot Width (mm [in]) C Shaft Length mm [in] D Bushing Length mm [in] S 0,79 [0.031] 0,79 [0.031] 15,88 [0.625] 6,35 [0.250] RoHS Mounting Compliant Hardware yes unassembled Dimensional Drawing (For reference only: mm [in].) 2 Center 1,57 [0.062] 5,08 [0.200] 16,66 Max. [0.656] 3,97 Typ. [0.156] 0,89 Max. [0.035] 11,51 Max. [0.453] C Shown with 50% shaft rotation o13,08 3X 2,24 Typ. [0.088] A 2,03 Typ. [0.080] o3,17 [0.125] 1 Left 3 Right [0.515] A D 6,46 [0.254] 5,08 [0.200] 45 1/4-2 NEF-2A 90 Mounting surface Table 392-M Order Guide Dimensions Electrical Catalog Listing 392050M9012 Resistance (Ohm) 2k Resistance Tolerance (%) Taper 10 S A B C D E RoHS Mounting Slot Slot Shaft Bushing Termination Compliant Hardware Depth Width Length Length Length (mm [in]) (mm [in]) (mm [in]) (mm [in]) (mm [in]) 0,79 [0.031] 0,79 [0.031] 25,40 [1.000] 6,35 [0.250] 14,30 [0.563] yes unassembled Dimensional Drawing (For reference only: mm [in].) 26,59 [1.047] E 1,57 [0.062] 2 Center C 0.89 Max. [0.035] 11,91 Max. [0.469] Shown with 50% shaft rotation o13,08 [0.515] A D B 2,03 Typ. [0.080] 6,46 [0.254] 5,08 [0.200] 3 Right 5,08 [0.200] 1 Left o3,18 45 [0.125] 3X o0,71 [0.028] Mounting surface 2X 0,89 [0.035] Locating pin 1 90 Locating pin 2 sensing.honeywell.com 17 392 Series Order Guides Table 392-N Order Guide Dimensions Electrical Catalog Listing Resistance (Ohm) Resistance Tolerance (%) Taper 392050M8756 10 k 10 Z 392050M9382 500 10 Z 392050M9488 1M 20 Z A B C D E RoHS Mounting Slot Slot Shaft Bushing Termination Compliant Hardware Depth Width Length Length Length (mm [in]) (mm [in]) (mm [in]) (mm [in]) (mm [in]) 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 22,23 [0.875] 17,45 [0.687] 15,09 [0.594] 6,35 [0.250] 7,92 [0.312 6,35 [0.250] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] no unassembled yes unassembled yes unassembled Dimensional Drawing (For reference only: mm [in].) 26,59 [1.047] 1,57 [0.062] 2 Center C Shown with 50% shaft rotation 0.89 Max. [0.035] 11,91 Max. [0.469] E o13,08 [0.515] A D B 2,03 Typ. [0.080] 6,46 [0.254] 5,08 [0.200] 3 Right 5,08 [0.200] o3,17 1 Left [0.125] 1/4-32 NEF-2A 3X o0,71 [0.028] 2X 0,89 [0.035] Locating pin 1 45 90 Mounting surface Locating pin 2 Table 392-O Order Guide Dimensions Electrical Catalog Listing 392063M9308 Resistance (Ohm) 10 k Resistance Tolerance (%) 10 Taper A Slot Depth (mm [in]) B Slot Width (mm [in]) C Shaft Length (mm [in]) D Bushing Length (mm [in]) S 0,79 [0.031] 0,79 [0.031] 15,88 [0.625] 6,35 [0.250] RoHS Mounting Compliant Hardware yes unassembled Dimensional Drawing (For reference only: mm [in].) 16,66 Max. [0.656] C 2 Center 1,57 [0.062] 3,97 Max. [0.156] 11,51 Max. [0.453] 3X 2,24 Typ. [0.088] B 18 sensing.honeywell.com [0.515] B 2,03 Typ. [0.080] 6,46 [0.254] o3,17 [0.125] 1 Left 5,08 [0.200] o13,08 4,78 [0.188] D 5,08 [0.200] 3 Right Shown with 50% shaft rotation 3,18 [0.125] 0,89 Max. [0.035] 1/4-32 NEF-2A 2X 0,99 [0.039] Locating pin 1 45 90 Mounting surface Locating pin 2 392 Series Order Guides Table 392-P Order Guide Dimensions Electrical Catalog Listing Resistance (Ohm) 392NAYSB103A Resistance Tolerance Taper (%) 10 k 10 A Slot Depth (mm [in]) B C D E RoHS Mounting Slot Shaft Bushing Termination Compliant Hardware Width Length Length Length (mm [in]) (mm [in]) (mm [in]) (mm [in]) 0,79 [0.031] S 0,79 [0.031] 6,35 [0.250] 12,70 [0.500] 14,30 [0.563] no unassembled Dimensional Drawing (For reference only: mm [in].) 26,59 Max. [1.047] 1,57 [0.062] 2 Center 0,89 Max. [0.035] 11,91 [0.469] E Shown with 50% shaft rotation C o13,08 [0.515] A D 2,03 Typ. [0.080] o3,18 [0.125] 6,46 [0.254] 5,08 [0.200] 1 Left 3 Right 5,08 [0.200] 2X 0,89 [0.035] 45 Locating pin 1 1/4-32 NEF-2A 3X o0,71 [0.028] 90 Mounting surface Locating pin 2 Table 392-Q Order Guide Dimensions Electrical Catalog Listing Resistance Resistance Tolerance Taper (Ohm) (%) 392072M6256 5k 10 S A Slot Depth (mm [in]) B Slot Width (mm [in]) C Shaft Length (mm [in]) 0,79 [0.031] 0,79 [0.031] 9,53 [0.375] D Bushing Length (mm [in]) 6,35 [0.250] RoHS Compliant Mounting Hardware yes unassembled Dimensional Drawing (For reference only: mm [in].) 16,66 Max. [0.656] 3,97 Max. [0.156] 2 Center 11,51 Max. [0.453] 1,57 [0.062] C Shown with 50% shaft rotation 0,92 Max. [0.036] o13,08 [0.515] D A 3X 2,24 Typ. [0.088] 6,45 [0.254] 5,08 [0.200] 3 Right o3,16 [0.125] 1 Left 5,08 [0.200] B 2,03 Typ. [0.080] 1/4-32 NEF-2A 2X 0,89 [0.035] Locating pin 1 45 90 Mounting surface Locating pin 2 sensing.honeywell.com 19 392 Series Order Guides Table 392-R Order Guide Dimensions Electrical Catalog Listing Resistance (Ohm) Resistance Tolerance (%) Taper A B C D E RoHS Slot Slot Shaft Bushing Termination Compliant Depth Width Length Length Length (mm [in]) (mm [in]) (mm [in]) (mm [in]) (mm [in]) 392JB1MEG 1M 20 S 0,79 [0.031] 0,79 [0.031] 22,23 [0.875] 392JB100 100 10 S 0,79 [0.031] 0,79 [0.031] 22,23 [0.875] 392JB100/NEW 100 10 S 0,79 [0.031] 0,79 [0.031] 22,23 [0.875] 392JB100K 100 k 10 S 0,79 [0.031] 0,79 [0.031] 22,23 [0.875] 392JB10K 10 k 10 S 0,79 [0.031] 0,79 [0.031] 22,23 [0.875] 392JB1K 1k 10 S 0,79 [0.031] 0,79 [0.031] 22,23 [0.875] 392JB250 250 10 S 0,79 [0.031] 0,79 [0.031] 22,23 [0.875] 392JB2500 2.5 k 10 S 0,79 [0.031] 0,79 [0.031] 22,23 [0.875] 392JB250K 250 k 10 S 0,79 [0.031] 0,79 [0.031] 22,23 [0.875] 392JB25K 25 k 10 S 0,79 [0.031] 0,79 [0.031] 22,23 [0.875] 392JB500 500 10 S 0,79 [0.031] 0,79 [0.031] 22,23 [0.875] 392JB500K 500 k 10 S 0,79 [0.031] 0,79 [0.031] 22,23 [0.875] 392JB50K 50 k 10 S 0,79 [0.031] 0,79 [0.031] 22,23 [0.875] 392JB5K 5k 10 S 0,79 [0.031] 0,79 [0.031] 22,23 [0.875] 392051M9692 10 k 10 S 0,79 [0.031] 0,79 [0.031] 22,23 [0.875] 392051M9693 1M 20 S 0,79 [0.031] 0,79 [0.031] 22,23 [0.875] 392051M5761 2.5 k 10 S 0,79 [0.031] 0,79 [0.031] 15,85 [0.624] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 392051M5803 1M 10 S 0,79 [0.031] 0,79 [0.031] 15,85 [0.624] 6,35 [0.250] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] Mounting Hardware yes unassembled yes unassembled no unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes none yes none yes none yes unassembled Dimensional Drawing (For reference only: mm [in].) 26,59 [1.047] E 1,57 [0.062] 2 Center C 0.92 Max. [0.036] 11,91 Max. [0.469] Shown with 50% shaft rotation o13,03 [0.513] A D B 2,03 Typ. [0.080] 6,44 [0.253] 5,08 [0.200] 3 Right 20 5,08 [0.200] 1 Left sensing.honeywell.com o3,16 3X o0,71 [0.028] 1/4-32 NEF-2A 2X 0,89 [0.035] [0.125] Locating pin 1 45 90 Mounting surface Locating pin 2 392 Series Order Guides Table 392-S Order Guide Dimensions Electrical Catalog Listing Resistance (Ohm) Resistance Tolerance (%) Taper 3925100K 100 k 10 S 392510K 10 k 10 S 3925250 250 10 S 3925500 500 10 S 3925500K 500 k 10 S 392550K 50 k 10 S 39255K 5k 10 S 392055M8814 100 k 10 S A Slot Depth (mm [in]) B Slot Width (mm [in]) C Termination Length (mm [in]) RoHS Compliant Mounting Hardware 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] yes none yes none yes none yes none yes none yes none yes none yes none Dimensional Drawing (For reference only: mm [in].) 26,59 [1.047] C 1,57 [0.062] 2 Center A Shown with 50% shaft rotation 0.92 Max. [0.036] 11.91 Max. [0.469] o13,03 [0.513] A See Detail A o3,16 [0.125] 6,52 [0.257] 5,08 [0.200] 3 Right 5,08 [0.200] 1 Left Detail A 3X o0,71 [0.028] Mounting surface 90 sensing.honeywell.com 21 RV6 Series Specific Configurations Table 7. RV6 Series Metal Shaft and Metal Bushing Specific Configurations Shaft Type Bushing AR Type Pin Termination RV6-A (See Table RV6-A on p. 23.) panel seal, 1 standard, and flatted 6,35 mm 2 [0.25 in] solder hook RV6-C (See Table RV6-C on p. 24.) panel seal, 1 split slotted locking, and 12,7 mm 2 [0.50 in] solder hook RV6-E (See Table RV6-E on p. 25.) panel seal, 1 split slotted locking, and 12,7 mm 2 [0.50 in] solder hook RV6-G (See Table RV6-G on p 27.) no panel seal, 1 standard, and slotted 6,35 mm 2 [0.25 in] 22 sensing.honeywell.com solder hook Configuration with Associated Hardware Shaft Type Bushing Type AR TerminPin ation RV6-B (See Table RV6-B on p. 23.) no panel 1 seal, flatted standard, and 6,35 mm 2 [0.25 in] solder hook RV6-D (See Table RV6-D on p. 24.) panel 1 seal, slotted standard, and 6,35 mm 2 [0.25 in] solder hook RV6-F (See Table RV6-F on pp. 26-27.) no panel seal, 1 standard, and slotted 6,35 mm 2 [0.25 in] solder hook Configuration with Associated Hardware RV6 Series Order Guides Table RV6-A Order Guide Dimensions Electrical Catalog Listing Resistance (Ohm) RV6SAYFD502B 5k Resistance Tolerance (%) 20 Taper A Flat Length (mm [in]) B Flat Width (mm [in]) C Shaft Length (mm [in]) D Bushing Length (mm [in]) S 15,47 [0.609] 2,39 [0.094] 22,23 [0.875] 6,35 [0.250] RoHS Compliant Mounting Hardware no unassembled Dimensional Drawing (For reference only: mm [in].) 16,66 Max. [0.656] 3,97 Typ. [0.156] 2 Center 1,57 [0.062] 0,91 Max. [0.036] 11,51 [ 0.453] 3X 2,24 Typ. [0.088] C Shown with 50% shaft rotation o13,08 A D B [0.515] 2,03 Typ. [0.080] 6,46 [0.254] 5,08 [0.200] 3 Right Locating pin 1 o3,18 1 Left 1/4-32 NEF-2A 5,08 [0.200] 2X 0,64 [0.025] 45 [0.125] 90 Mounting surface Locating pin 2 Table RV6-B Order Guide Dimensions Electrical Catalog Listing Resistance (Ohm) RV6NAYFD103A 10 k Resistance Tolerance (%) 10 Taper A Flat Length (mm [in]) B Flat Width (mm [in]) C Shaft Length (mm [in]) D Bushing Length (mm [in]) S 15,47 [0.609] 2,39 [0.094] 22,23 [0.875] 6,35 [0.250] RoHS Compliant Mounting Hardware no unassembled Dimensional Drawing (For reference only: mm [in].) 3,97 Typ. [0.156] 2 Center 1,57 [0.062] 3X 2,24 Typ. [0.088] 16,66 Max. [0.656] 0,89 Max. [0.035] 11,51 [ 0.453] C Shown with 50% shaft rotation o13,08 D 2,03 Typ. [0.080] 6,46 [0.254] 5,08 [0.200] 3 Right o3,18 1 Left 5,08 [0.200] [0.515] B A 1/4-32 NEF-2A 2X 0,89 [0.035] [0.125] Locating pin 1 45 90 Mounting surface Locating pin 2 sensing.honeywell.com 23 RV6 Series Order Guides Table RV6-C Order Guide Dimensions Electrical Catalog Listing Resistance (Ohm) Resistance Tolerance (%) Taper RV6TAYSA103A 10 k 10 S RV6TAYSA503A 50 k 10 S RV6TAYSD103A 10 k 10 S RV6TAYSD502B 5k 20 S A Slot Depth (mm [in]) B Slot Width (mm [in]) C Shaft Length (mm [in]) D Bushing Length (mm [in]) 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 15,88 [0.625] 15,88 [0.625] 22,23 [0.875] 22,23 [0.875] 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] RoHS Compliant Mounting Hardware no unassembled no unassembled no unassembled no unassembled Dimensional Drawing (For reference only: mm [in].) 2 Center 1,57 [0.062] 3,97 Typ. [0.156] 3X 2,24 Typ. [0.088] 16,66 Max. [0.656] 0,91 Max. [0.036] 11,51 [ 0.453] Shown with 50% shaft rotation C o13,08 [0.515] D A o3,18 [0.125] 5,08 [0.200] 3 Right B 2,03 Typ. [0.080] 6,54 [0.258] 1 Left Locating pin 1 5,08 [0.200] 45 90 1/4-32 NEF-2A Mounting surface 2X 0,89 Typ. [0.035] Locating pin 2 Table RV6-D Order Guide Dimensions Electrical Catalog Listing Resistance Resistance Tolerance Taper (Ohm) (%) D A Slot Depth (mm [in]) B Slot Width (mm [in]) C Shaft Length (mm [in]) 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 15,88 [0.625] 22,23 [0.875] 22,23 [0.875] Bushing Length (mm [in]) 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] 0,79 [0.031] 22,23 [0.875] 12,70 [0.500] RV6SAYSA103A 10 k 10 S RV6SAYSA104A 100 k 10 S RV6SAYSD251A 250 k 10 S 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] RV6SAYSD502A N/P 392 5k 10 S 0,79 [0.031] RoHS Compliant Mounting Hardware no unassembled no unassembled no unassembled no unassembled Dimensional Drawing (For reference only: mm [in].) 2 Center 1,57 [0.062] 3,97 Typ. [0.156] 3X 2,24 Typ. [0.088] 16,66 Max. [0.656] 0,91 Max. [0.036] 11,51 [ 0.453] Shown with 50% shaft rotation C o13,08 A D [0.125] 6,46 [0.254] 1 Left 5,08 [0.200] 1/4-32 NEF-2A 2X 0,64 [0.025] 24 B o3,18 5,08 [0.200] 3 Right [0.515] 2,03 Typ. [0.080] sensing.honeywell.com Mounting surface Locating pin 1 45 90 RV6 Series Order Guides Table RV6-E Order Guide Dimensions Electrical Catalog Listing Resistance (Ohm) Resistance Tolerance (%) Taper RV6LAYSA101A 100 10 S RV6LAYSA102A 1k 10 S RV6LAYSA103A 10 k 10 S RV6LAYSA104A 100 k 10 S RV6LAYSA105A 1M 10 S RV6LAYSA251A 250 10 S RV6LAYSA252A 2.5 k 10 S RV6LAYSA253A 25k 10 S RV6LAYSA501A 500 10 S RV6LAYSA502A 5k 10 S RV6LAYSA503A 50 k 20 S RV6LAYSA504A 500 k 10 S RV6LAYSA505B 5M 10 S A Flat Length (mm [in]) B Flat Width (mm [in]) C Shaft Length (mm [in]) D Bushing Length (mm [in]) 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 15,88 [0.625] 15,88 [0.625] 15,88 [0.625] 15,88 [0.625] 15,88 [0.625] 15,88 [0.625] 15,88 [0.625] 15,88 [0.625] 15,88 [0.625] 15,88 [0.625] 15,88 [0.625] 15,88 [0.625] 15,88 [0.625] 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] RoHS Compliant Mounting Hardware no assembled no assembled no assembled no assembled no assembled no assembled no assembled no assembled no assembled no assembled no assembled no assembled no unassembled Dimensional Drawing (For reference only: mm [in].) 3,97 Typ. [0.156] 2 Center 3X 2,24 Typ. [0.088] 16,66 Max. [0.656] 0,89 Max. [0.035] 11,51 [0.453] Shown with 50% shaft rotation C o13,08 [0.515] A D 1,57 [0.062] o3,18 B 2,03 Typ. [0.080] [0.125] 6,46 [0.254] 5,08 [0.200] 3 Right 1/4-32 NEF-2A 1 Left 5,08 [0.200] 2X 0,89 [0.035] Locating pin 1 45 90 Mounting surface sensing.honeywell.com 25 RV6 Series Order Guides Table RV6-F Order Guide Dimensions Electrical Catalog Listing Resistance (Ohm) Resistance Tolerance (%) Taper A Slot Depth (mm [in]) B Slot Width (mm [in]) C Shaft Length (mm [in]) D Bushing Length (mm [in]) 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 15,88 [0.625] 15,88 [0.625] 15,88 [0.625] 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] RoHS Compliant Mounting Hardware no unassembled no unassembled no unassembled no unassembled no unassembled no unassembled no assembled no assembled no assembled no assembled no assembled no assembled RV6NAYSA103A 10 k 10 S RV6NAYSA502A 5k 10 S RV6NAYSA503A 50 k 10 S 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] RV6NAYSB101A 100 10 S 0,79 [0.031] 0,79 [0.031] 12,70 [0.500] 6,25 [0.250] RV6NAYSB103A 10 k 10 S RV6NAYSB502A 5k 10 S RV6NAYSD101A 100 10 S RV6NAYSD102A 1k 10 S RV6NAYSD103A 10 k 10 S RV6NAYSD104A 100 k 10 S RV6NAYSD105A 1M 10 S RV6NAYSD251A 250 10 S RV6NAYSD252A 2.5 k 10 S 10 S 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] assembled 25 k 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] no RV6NAYSD253A 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] no assembled RV6NAYSD253A 25 k 10 S 0,79 [0.031] 0,79 [0.031] 22,23 [0.875] 6,25 [0.250] no assembled RV6NAYSD253A 250 k 10 S 0,79 [0.031] 0,79 [0.031] 22,23 [0.875] 6,25 [0.250] no assembled RV6NAYSD501A 500 10 S 0,79 [0.031] 0,79 [0.031] 22,23 [0.875] 6,25 [0.250] no assembled RV6NAYSD502A 5k 10 S 0,79 [0.031] 0,79 [0.031] 22,23 [0.875] 6,25 [0.250] no assembled RV6NAYSD502B 5k 10 S 10 S assembled 500 k 10 S 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] no RV6NAYSD504A 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] unassembled 50 k 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] no RV6NAYSD503A 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] no assembled (Continued on next page.) 26 sensing.honeywell.com RV6 Series Order Guides Table RV6-F Order Guide (continued) Dimensions Electrical Catalog Listing Resistance (Ohm) Resistance Tolerance Taper (%) RV6NAYSL103A 10 k 10 S RV6NAYSL104A 100 k 10 S RV6LAYSL504A 500 k 10 S RV6LAYSD101AP 100 10 S A Slot Depth (mm [in]) B Slot Width (mm [in]) C Shaft Length (mm [in]) D Bushing Length (mm [in]) 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 9,53 [0.375] 9,53 [0.375] 9,53 [0.375] 22,23 [0.875] 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] RoHS Mounting Compliant Hardware no assembled no assembled no assembled no assembled Dimensional Drawing (For reference only: mm [in].) 16,66 Max. [0.656] 3,97 Typ. [0.156] 2 Center 0,89 Max. [0.035] 11,51 [0.453] 3X 2,24 Typ. [0.088] Shown with 50% shaft rotation C o13,08 [0.515] A D 1,57 [0.062] B 2,03 Typ. [0.080] o3,18 [0.125] 6,46 [0.254] 5,08 [0.200] 3 Right 5,08 [0.200] 45 Locating pin 1 1/4-32 NEF-2A 1 Left 90 Mounting surface 2X 0,89 [0.035] Table RV6-G Order Guide Dimensions Electrical Catalog Listing Resistance (Ohm) Resistance Tolerance Taper (%) RV6SAYSA103C 10 k 10 Z RV6SAYSA104C 100 k 10 Z RV6SAYSD102C 1k 10 Z RV6SAYSD102D 1k 10 Z RV6SAYSD502D 5k 20 Z A Slot Depth (mm [in]) B Slot Width (mm [in]) C Shaft Length (mm [in]) D Bushing Length (mm [in]) 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 15,88 [0.625] 15,88 [0.625] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] RoHS Mounting Compliant Hardware no assembled no unassembled no unassembled no unassembled no unassembled Dimensional Drawing (For reference only: mm [in].) 3,97 Typ. [0.156] 2 Center 1,57 [0.062] 3X 2,24 Typ. [0.088] 16,66 Max. [0.656] 0,89 Max. [0.035] 11,51 [ 0.453] C Shown with 50% shaft rotation o13,08 [0.515] D A B o3,18 2,03 Typ. [0.080] [0.125] 6,46 [0.254] 5,08 [0.200] 3 Right 1 Left 5,08 [0.200] 2X 0,89 [0.035] 1/4-32 NEF-2A Mounting surface Locating pin 1 45 90 Locating pin 2 sensing.honeywell.com 27 Figure 6. Mounting Hardware Jam Nut Mounting Nut Lock Washer 7,94 mm [5/16 in] across flats 3,97 mm [5/32 in] thick 1/4 x 32 thread 7,94 mm [5/16 in] across flats 10,32 mm [5/16 in] outside diameter 0,64 mm [0.025 in] thick WARNING O-Ring WARNING PERSONAL INJURY MISUSE OF DOCUMENTATION DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. * Failure to comply with these instructions could result in death or serious injury. * ADDITIONAL INFORMATION Failure to comply with these instructions could result in death or serious injury. The following associated literature is available at sensing.honeywell.com: * Product Range Guide * Product Line Guide * Installation Instructions Find out more Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office. To learn more about Honeywell's sensing and control products, call +1-815-235-6847 or 1-800-537-6945, The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell website, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. visit sensing.honeywell.com, or e-mail inquiries to info.sc@honeywell.com Sensing and Control Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 honeywell.com 32301265-A-EN IL50 October 2014 (c) 2014 Honeywell International Inc. All rights reserved.