24020080000 - HARTING - Datasheet.Live

English

General Description

Speciﬁ cation

Target markets

Machinery & Robotics Automation Industrial network

Infrastructure

Wind Energy,

Solar Energy Transportation Shipbuilding

■ Fast Ethernet Non-Blocking Switch architecture in accordance with IEEE 802.3

■ Variants with industrial temperature range of -40°C ... +70°C

■ Wide range power supply 24/48 VDC

■ Surge protection and reverse polarity protection

■ Minimum energy consumption due to energy-eﬃ cient Ethernet

3 to 8 Ethernet ports RJ45 and FOC

Unmanaged Plug & Play Ethernet switches for DIN rail assembly in control

cabinets

Commercial temp.: 0°C ... +55°C / Industrial temp.: -40 ... +70°C

Switch Features

Housing width 46.5 mm 60 mm 120 mm

Number of ports 3, 4, 5 8 7, 8

Switching technology Store and Forward

Supported standards IEEE 802.3

Frame Size 1552 bytes

MAC table size 1k entries

Packet buﬀ er size 448 kbit

Non-blocking Yes

Quality of Service Yes

Energy Eﬃ cient

Ethernet Yes

PROFINET compatible Yes

EthernetIP compatible Yes

Ethernet ports 10BASE-Te / 100BASE-TX EEE

Type of connection RJ45

Auto-negotiation Yes

Auto-polarity Yes

Auto-MDI(X) Yes

Transfer conditions Twisted pair

Transfer speed 10 / 100 Mbit/s

Transfer length 100 m (Twisted Pair, Cat 5)

Ethernet ports 100BASE-FX

Type of ﬁ bre Multi-mode (MM) Single-mode (SM)

Type of connection SC Duplex

Transfer conditions FOC

Wavelength 1310 nm

Transfer speed 100 Mbit/s

Transfer length 2 km 15 km

Output power -19 dBm ... -14 dBm -15 dBm ... -8 dBm

Input sensitivity ≤ -32 dBm ≤ -34 dBm

Power supply

Nominal voltage 24 VDC 48 VDC

Permissible voltage range 9 VDC ... 60 VDC

Surge protection Yes

Reverse polarity proof Yes

Starting current 1.60 A 3.20 A

Overcurrent protection at input Yes (4 A)

Max. power consumption @ 24 VDC 2.88 W ... 3.72 W

Conductor cross-section 0.08 mm² ... 2.5 mm² (28 AWG ... 12 AWG)

Type of connection 3-pole, pluggable screwed contact

Pinout + / - /

Supply circuit (according to 60950) SELV (circuit breaker 10 A)

The Ha-VIS eCon 2000 Fast Ethernet family of unmanaged Ethernet switches

is equipped with up to 8 Fast Ethernet ports and allow for cost-eﬃ cient

and quick expansion and/or reconstruction of network infrastructures.

Due to the extremely ﬂ at design, these switches can be accommodated

in installations where space is restricted towards the cable connection

at the front. The selection includes various combinations of variants with

RJ45 and ﬁ bre optic ports. Automatic detection of the transmission rate

(auto-negotiation) and of the wiring of the twisted pair data cable (auto-

polarity and auto-MDI(X)) allow for simple plug & play. All variants are

available with the temperature ranges "Industrial" and "Commercial".

Ha-VIS eCon 2000 Fast Ethernet Basic

HARTING Technologiegruppe

P.O.Box 1473, D-32325 Espelkamp

Wilhelm-Harting-Straße 1, D-32325 Espelkamp, Germany

Service hotline: +49 5772 47-97100, Fax: +49 5772 47-495

Electric@HARTING.com, www.HARTING.com

Note: We reserve the right to make technical changes to the products and to the content of this

document at any time without prior notiﬁ cation. The HARTING Technologiegruppe does not accept

any responsibility for possible errors or incompletions in this document. We reserve all the rights to

this document and the topics and illustrations contained within it. Copying, disclosure to third parties

or use of its content - even partially - is forbidden without the prior written consent of the HARTING

Technologiegruppe.

Energy

Efficient

Ethernet

Ambient conditions

Commercial temperature range 0°C ... +55°C

Industrial temperature range -40°C ... +70°C

Storage temperature range -40°C ... +85°C

Relative humidity (operation) 0% ... 95% (non-condensing)

Relative humidity (storage and

transport) 0% ... 95% (non-condensing)

Air pressure 2000 m (795 hPa)

Drawings

Speciﬁ cations / order information

Approvals (in preparation)

CE (FCC CFR 47 Part 15, cUL US 508 listed, DNV, GL, ABS, NK)

EMC and environmental conditions

EMC interference immunity (EN 61000-6-1, 61 000-6-2 55024)

Electrostatic discharge (ESD) EN 61 000-4-2

Electromagnetic ﬁ eld EN 61 000-4-3

Rapid transients (burst) EN 61 000-4-4

Surge voltages EN 61 000-4-5

Conducted interference voltages EN 61 000-4-6

EMC interference emission (EN 61000-6-4, EN 55 022, FCC CFR 47 Part 15)

Mechanical stability (EN 60721-3)

IEC 60068-2-6 Vibration

IEC 60068-2-6 Vibrationresonance search

IEC 60068-2-27 Shock test

Scope of delivery

■ Pluggable screwed contact for power supply

■ Installation instructions

Housing

Housing width 46.5 mm 60 mm 120 mm

Dimensions H x W x D

(without pluggable scre-

wed contact and holding

bracket)

113.5 mm x

46.5 mm x

27.3 mm

113.5 mm x

60 mm x

27.3 mm

113.5 mm x

120 mm x

27.3 mm

Weight 162 g ... 170 g 217 g 364 g ... 420 g

Type of installation 35 mm DIN rail acc. to EN 60 715

Material hoods/

housings Anodised aluminium

Protection class (with

plugged screwed

contact)

IP30

Protection class III

Ports / order information

Commercial temp.: 0°C ... +55°C Industrial temp.: -40°C ... +70°C

RJ45 SFP SC Housing

width

Power consump-

tion @ 24 VDC

MTBF

in million h Switch Order no. Switch Order no.

3 - - 46.5 mm 30 mA 3.13 Ha-VIS eCon 2030B-A 24020030010 Ha-VIS eCon 2030BT-A 24020030000

4 - - 46.5 mm 35 mA 2.99 Ha-VIS eCon 2040B-A 24020040010 Ha-VIS eCon 2040BT-A 24020040000

5 - - 46.5 mm 40 mA 2.86 Ha-VIS eCon 2050B-A 24020050010 Ha-VIS eCon 2050BT-A 24020050000

6 - 1x MM (2 km) 120 mm 120 mA 1.24 Ha-VIS eCon 2061B-AD 24020061110 Ha-VIS eCon 2061BT-AD 24020061100

6 - 1x SM (15 km) 120 mm 120 mA 1.26 Ha-VIS eCon 2061B-AF 24020061210 Ha-VIS eCon 2061BT-AF 24020061200

6 - 2x MM (2 km) 120 mm 150 mA 1.20 Ha-VIS eCon 2062B-AD 24020062110 Ha-VIS eCon 2062BT-AD 24020062100

6 - 2x SM (15 km) 120 mm 150 mA 1.23 Ha-VIS eCon 2062B-AF 24020062210 Ha-VIS eCon 2062BT-AF 24020062200

8 - - 60 mm 60 mA 2.53 Ha-VIS eCon 2080B-A 24020080010 Ha-VIS eCon 2080BT-A 24020080000

HARTING Technologie

Date of issue 04.2014

Doc No 24020000000/98

Status and diagnostic displays

Power ("Pwr") illuminated green Supply voltage is applied

Link/Activity ("L/A") oﬀ No link

Link/Activity ("L/A") illuminated green Link is active

Link/Activity ("L/A") ﬂ ashes green Link is active and data is transferred

Link speed ("Spd") oﬀ 10 Mbit/s

Link speed ("Spd") illuminated yellow 100 Mbit/s