ACT8710 Product Brief, 03-Feb-08 Advanced InformationAll Information Subject to Change Four Channel Integrated Power Management IC for Handheld Portable Equipment FEATURES GENERAL DESCRIPTION * Multiple Patents Pending * Li+ Battery Charger with Integrated MOSFET The patent-pending ACT8710 is a complete, cost effective, highly efficient ActivePMUTM power management solution that is ideal for a wide range of portable handheld equipment. This device integrates two PWM step-down DC/DC converters, one PWM step-up DC/DC converter with over-voltage protection (OVP) and a full-featured linear-mode Li+ battery charger into a single, thin, space-saving package. An I2C Serial Interface provides programmability for the DC/DC converters and battery charger. - ON/OFF Control and Status Indication * Three Integrated Regulators - 350mA Step-Down DC/DC - 550mA Step-Down DC/DC - Step-Up DC/DC with OVP for WLED Bias * I2CTM Compatible Serial Interface - Programmable Output Voltages - Configurable Operating Modes REG1 and REG2 are fixed-frequency, current-mode PWM step-down DC/DC converters that are optimized for high efficiency and are capable of supplying up to 350mA and 550mA, respectively. REG3 is a fixed-frequency PWM step-up converter that safely and efficiently biases a string of up to seven white-LEDs for backlighting. The battery charger incorporates an internal power MOSFET for constant-current/constant-voltage, thermally regulated charging of a single-cell Li+ battery. All DC/DC converters' output voltage are programmable and controllable via the I2C interface. * Minimal External Components * 4x4mm, Thin-QFN (TQFN44-24) Package - Only 0.75mm Height - RoHS Compliant APPLICATIONS * Portable Devices and PDAs * Digital Media Players * Battery Operated Devices The ACT8710 is available in a tiny 4mm x 4mm 24-pin Thin-QFN package that is just 0.75mm thin. * GPS Receivers, etc. SYSTEM BLOCK DIAGRAM VIN CHGLEV nSTAT Battery Programmable Up to 1A Single Cell Li+ Battery Charger REG1 Step-Down DC/DC nMSTR OUT1 1.1V to 4.4V Up to 350mA nIRQ nRSTO SCL SDA REG2 System Control Step-Down DC/DC OUT2 1.1V to 4.4V Up to 550mA ON1 REG3 ON2 Step-Up DC/DC ACT8710 ActivePMU Innovative Products. Active Solutions. OUT3 WLED Bias TM -1- www.active-semi.com TM ActivePMU is a trademark of Active-Semi. I2CTM is a trademark of Philips Electronics. Copyright (c) 2008 Active-Semi, Inc. ACT8710 Product Brief, 03-Feb-08 PRODUCT OPTIONS Block Function Output Voltage CHGR Battery Charger REG1 Step-Down DC/DC REG2 Step-Down DC/DC REG3 Step-Up DC/DC Capability 4.20V (4.10V to 4.40V available) Programmable up to 1A 350mA Programmable 1.1V to 4.4V 550mA Programmable up to 27.5V Up to 7 WLEDs : Output voltage options detailed in this table represent standard voltage options, and are available for samples or production orders. Contact Active-Semi for more information regarding semi-custom output voltage combinations. : Contact factory for additional available products or custom requirements. FUNCTIONAL BLOCK DIAGRAM VSYS Active-Semi BODY AND VSYS CONTROL ACT8710 VIN AC Adaptor 4.3V to 6V or USB BAT Li+ Battery + CURRENT SENSE VINUVLO VIN 4.0V VOLTAGE SENSE CHGLEV FLOAT Charge Control PRECONDITION 2.9V THERMAL REGULATION 110C SCL VP1 Serial Interface SDA To Battery OUT2 REG1 nRSTO SW1 OUT1 OUT1 GP12 VP2 VSYS To Battery nMSTR REG2 PUSH BUTTON OUT2 SW2 OUT2 OUT2 GP12 nIRQ System Control SW3 ON1 OVP3 REG3 ON2 GA Innovative Products. Active Solutions. To Battery OUT3 -2- FB3 GP3 www.active-semi.com Copyright (c) 2008 Active-Semi, Inc.