NUMBER TYPE GS-12-0984 Product Specification TITLE PAGE REVISION 1 of 16 TRX10GDL0610C3 (SFP+ LRM Module) AUTHORIZED BY J. Blank A DATE 27 Apr. 2011 CLASSIFICATION UNRESTRICTED Product Specification 10 GBd SFP+ 1310 nm LRM Linear Transceiver TRX10GDL0610C3 Product Features: Hot pluggable SFP+ optical transceiver Programmable input equalizer Data rate transparent from 9.95 to 11.3 Gbps Low power consumption, 0.75 W typ. Excellent EMI performance Transmission distance up to 220 m MMF 0 C to +70 C case operating temperature 1310 nm DFB laser Duplex LC connector Laser Class 1 RoHS 6/6 compliant Applications: 10G Ethernet 10GBASE-LRM FCI's SFP+ optical transceiver TRX10GDL0610C3 is a module for transmission over legacy multimode fibers. It complies with the SFP+ MSA specifications (SFF-8431 and SFF-8432) and with 10GBASE-LRM per IEEE 802.3. It is RoHS 6/6 compliant per Directive 2002/95/EC and laser class 1 safety compliant per IEC/CDRH. The sub-Watt power consumption and the excellent EMI performance allow system design with high port density. An adjustable input equalizer allows to overcome host board high frequency signal loss and to optimize module performance in interaction with a host board transmit equalizer. Supported Standards Application 10G Ethernet Standard Data Rate IEEE 802.3 10GBASE-LRM 10.3125 Gbps Copyright (c) 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this document at any time without notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0984 Product Specification TITLE PAGE REVISION 2 of 16 TRX10GDL0610C3 (SFP+ LRM Module) AUTHORIZED BY J. Blank A DATE 27 Apr. 2011 CLASSIFICATION UNRESTRICTED Table of Contents Table of Contents ............................................................................................................................................ 2 Functional Description .................................................................................................................................... 3 Electrical Characteristics ................................................................................................................................ 4 Absolute Maximum Ratings ........................................................................................................................... 4 Recommended Operating Conditions ............................................................................................................ 4 Low Speed Characteristics ............................................................................................................................ 4 SFI Module Transmitter Input Characteristics................................................................................................ 5 SFI Module Receiver Output Characteristics ................................................................................................. 5 Optical Characteristics.................................................................................................................................... 6 General Parameters ....................................................................................................................................... 6 Optical Transmitter ......................................................................................................................................... 6 Optical Receiver ............................................................................................................................................. 6 Application Information .................................................................................................................................. 7 Connector Pinout ........................................................................................................................................... 7 Electrical Pin Definition .................................................................................................................................. 7 Application Schematics .................................................................................................................................. 8 Interfacing the Transceiver............................................................................................................................. 9 Digital Optical Monitoring ............................................................................................................................... 9 Tx Input Equalizer Adjustment ..................................................................................................................... 10 Programmability Feature Code .................................................................................................................... 11 Passcode Entry and Modification ................................................................................................................. 11 Module Outline ............................................................................................................................................. 12 Module Safety & Compliance ....................................................................................................................... 13 ESD & Electromagnetic Compatibility ......................................................................................................... 13 Eye Safety ....................................................................................................................................................... 14 Ordering Information ..................................................................................................................................... 15 Copyright (c) 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this document at any time without notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0984 Product Specification TITLE PAGE REVISION 3 of 16 TRX10GDL0610C3 (SFP+ LRM Module) AUTHORIZED BY J. Blank A DATE 27 Apr. 2011 CLASSIFICATION UNRESTRICTED Functional Description The transmit path is based on an AC coupled 100 ohm differentially terminated driver coupled to a 1310 nm DFB laser. Laser output may be disabled by pulling the transmitter disable (TX_DIS) line high which is its default state when leaving the input floating due to an internal pull-up resistor. A fault condition is raised upon detection of an abnormal laser state. The receive path consists of a receiver optical sub-assembly (ROSA) for optical to electrical conversion, followed by a linear amplifier to boost the electrical signal. A loss of signal (LOS) status line provides information to facilitate easy link detection. Complete digital optical monitoring is implemented in compliance to SFF-8472 and made accessible via the 2-wire interface providing real time information about all important module parameters and status information. Copyright (c) 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this document at any time without notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0984 Product Specification TITLE PAGE REVISION 4 of 16 A AUTHORIZED BY TRX10GDL0610C3 (SFP+ LRM Module) DATE J. Blank 27 Apr. 2011 CLASSIFICATION UNRESTRICTED Electrical Characteristics Absolute Maximum Ratings Rating Conditions Storage Ambient Temperature Powered Case Temperature Operating Relative Humidity Supply Voltage Range Symbol stg c Non condensing RH VCCT/R Min Max Units -40 0 0 -0.5 +85 +75 95 4.0 C C % V Any stress beyond the maximum ratings may result in permanent damage to the device. Specifications are guaranteed only under recommended operating conditions. Recommended Operating Conditions Parameter Conditions Operating Case Temperature Symbol Case Power Supply Voltage DC Common Mode Voltage Min Typ Max Units +70 C 3.30 3.465 V 4.0 V Max Units 0 VCCT/R 3.135 SFI Signals VCM -0.5 Conditions Symbol Min Low Speed Characteristics Parameter Typ Supply Current Transmitter @ VCCT IVCCTX 150 mA Supply Current Receiver @ VCCR IVCCRX 70 mA @ VCCT/R IVCC Total Supply Current Power Consumption 0.75 VOL TX_Fault, RX_LOS Host Vcc Range 2 V - 3.47 V, IOL_max = 4 mA TX_Dis, RS0, RS1 Low Voltage TTL SCL, SDA Host Vcc Range 3.13 V - 3.47 V, IOL_max = 4 mA VIL 0 Host_ Vcc - 0.5 -0.3 VIH 2.0 VIL -0.3 VOH VIH VOL VOH VccT * 0.7 0.0 Host_ Vcc - 0.5 280 mA 1.0 W 0.4 Host_ Vcc + 0.3 0.8 VccT + 0.5 VccT * 0.3 VccT + 0.5 0.4 Host_ Vcc + 0.3 V Copyright (c) 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this document at any time without notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0984 Product Specification TITLE PAGE REVISION 5 of 16 A AUTHORIZED BY TRX10GDL0610C3 (SFP+ LRM Module) DATE J. Blank 27 Apr. 2011 CLASSIFICATION UNRESTRICTED SFI Module Transmitter Input Characteristics Parameter Conditions Nominal Data Rate Reference Differential Input Impedance Input AC Common Mode Input Voltage Differential Input Voltage Swing Min Typ Max 10.3125 Zd Differential Input S-parameter Differential to Common Mode 3 Conversion ) Total Jitter Data Dependent Jitter Units Gbd 100 0 25 150 900 mV (RMS) mV 2 x |V(TD+) - V(TD-)| VID 0.01 - 4.1 GHz 4.1 - 11.1 GHz SDD11 2 ) ) dB dB 0.01 - 11.1 GHz SCD11 -10 dB TJ DDJ 0.28 0.1 UI(p-p) UI(p-p) UJ 0.023 RMS Max Units Uncorrelated Jitter 1) 2) 3) Symbol 1 Reflection coefficient given by equation SDD11(dB) < -12 + 2 x SQRT(f), with f in GHz. Reflection coefficient given by equation SDD11(dB) < -6.3 + 13 x Log10(f/5.5), with f in GHz. Common mode reference impedance is 25. SFI Module Receiver Output Characteristics Parameter Conditions Nominal Data Rate Reference Differential Output Impedance Termination Mismatch Symbol Min Typ 10.3125 Zd 100 Zd 5 Output AC Common Mode Voltage 7.5 RLoad = 100 ohm, PIN_OMA -8 dBm 2 x |V(RD+) - V(RD-)| Differential Output Amplitude 0.01 - 4.1 GHz Differential Output S-parameter 4.1 - 11.1 GHz 4 Common Mode Output Return Loss ) Receiver Waveform Distortion Penalty 1) 2) 3) 4) Gbd 0.01 - 2.5 GHz 2.5 - 11.1 GHz VOSPP 180 SDD22 250 % mV (RMS) 400 mV 1 ) dB 2 ) dB 3 SCC22 ) -3 dB dB dWDP 1.5 dB Reflection coefficient given by equation SDD22(dB) < -12 + 2 x SQRT(f), with f in GHz. Reflection coefficient given by equation SDD22(dB) < -6.3 + 13 x Log10(f/5.5), with f in GHz. Reflection coefficient given by equation SCC22(dB) = -7 + 1.6 x f, with f in GHz Common mode reference impedance is 25. Copyright (c) 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this document at any time without notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0984 Product Specification TITLE PAGE REVISION 6 of 16 A AUTHORIZED BY TRX10GDL0610C3 (SFP+ LRM Module) DATE J. Blank 27 Apr. 2011 CLASSIFICATION UNRESTRICTED Optical Characteristics General Parameters Parameter Operating Range Conditions Min Modal Bandwidth (MHz*km) Symbol Min Typical 10GBd Units lOP 0.5 220 m 62.5 m FDDI MMF 62.5 m OM1 MMF 50 m OM2 MMF 50 m OM3 MMF Optical Transmitter Parameter Conditions Symbol Center Wavelength TRP Min Typ Max Units 1290 1310 1330 nm RMS Spectral Width Average Launch Power Optical Modulation Amplitude Extinction Ratio Relative Intensity Noise 3.6 nm 0.5 1.5 -128 dBm dBm dB dB/Hz Typ Max Units 1310 Pavg 1355 0.5 nm dBm PMAX_OMA 1.5 dBm Pavg POMA ER RIN -6.5 -4.5 3.5 Symbol Min 1260 Optical Receiver Parameter Conditions Center Wavelength Average Input Power C Overload Power in OMA 31 -12 Receiver Sensitivity PRBS 2 -1, BER < 1*10 @10.3125GBd Stressed Receiver Sensitivity PRBS 2 -1, BER < 1*10 @ 10.3125GBd Stressed Receiver Sensitivity Symmetrical Test PRBS 2 -1, BER < 1*10 @ 10.3125GBd 31 Loss of Signal Loss of Signal Hysteresis 31 Assert De-Assert PIN(OMA) -16 -13 dBm PIN(OMA) -11.5 -8.5 dBm PIN(OMA) -11 -8 dBm -13 -11 -8 -12 -12 Pavg_as POMA_deas -25 Hyst 0.5 dBm dB Note: The specified characteristics are met within the recommended range of operating. Unless otherwise noted, typical data are quoted at nominal voltages and +25C ambient temperature. Copyright (c) 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this document at any time without notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0984 Product Specification TITLE PAGE REVISION 7 of 16 TRX10GDL0610C3 (SFP+ LRM Module) AUTHORIZED BY J. Blank A DATE 27 Apr. 2011 CLASSIFICATION UNRESTRICTED Application Information Connector Pinout Electrical Pin Definition PIN Logic Symbol 1 2 LVTTL-O VeeT TX_Fault 3 4 LVTTL-I LVTTL-I/O TX_Dis SDA 5 6 LVTTL-I SCL MOD_ABS 7 8 LVTTL-I LVTTL-O RS0 RX_LOS 9 10 LVTTL-I RS1 VeeR Transmitter Rate Select Module Receiver Ground VeeR RD- Module Receiver Ground Receiver Inverted Data Output RD+ VeeR Receiver Data Output Module Receiver Ground VccR VccT Module Receiver 3.3 V Supply Module Transmitter 3.3 V Supply VeeT TD+ Module Transmitter Ground Transmitter Non-Inverted Data Input TDVeeT Transmitter Inverted Data Input Module Transmitter Ground 11 12 13 14 CML-O CML-O 15 16 17 18 19 20 CML-I CML-I Name / Description Module Transmitter Ground Module Transmitter Fault Transmitter Disable; Turns off transmitter laser output 2-Wire Serial Interface Data Line 2-Wire Serial Interface Clock (=MOD_DEF0) Module Absent, shorted to module ground Note 1 2 2 Receiver Rate Select Receiver Loss of Signal Indication Active LOW 1 1 1 1 1 1. Module ground pins Vee are isolated from the module case. 2. Shall be pulled up with 1k-10k ohms to a voltage between 3.13 V and 3.47 V on the host board. Copyright (c) 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this document at any time without notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0984 Product Specification TITLE PAGE REVISION 8 of 16 TRX10GDL0610C3 (SFP+ LRM Module) AUTHORIZED BY J. Blank A DATE 27 Apr. 2011 CLASSIFICATION UNRESTRICTED Application Schematics Recommended electrical connections to transceiver are shown below. Pull-ups: 1k - 10k ohms. Copyright (c) 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this document at any time without notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0984 Product Specification TITLE PAGE REVISION 9 of 16 AUTHORIZED BY TRX10GDL0610C3 (SFP+ LRM Module) J. Blank A DATE 27 Apr. 2011 CLASSIFICATION UNRESTRICTED Interfacing the Transceiver Communication is done by a serial 2-wire interface compatible to the I2C bus protocol. Refer to SFF-8472 for a more detailed explanation of the registers: Base Address A0h Content Serial Transceiver ID as 0 - 95 defined in SFP MSA 96 - 127 FCI Specific Register 128 - 255 Base Address A2h Register 0 - 55 56 - 95 Reserved 96 - 119 120(LSB) - 123(MSB) 124(LSB) - 127(MSB) Content Alarm & Warnings Thresholds & Limits External calibration constants (not used) Values from real time diagnostic monitoring Passcode change field Passcode entry field 248 Customer specific, writable area Input equalizer setting 249 - 253 254 Reserved Feature code 255 Reserved 128 - 247 Digital Optical Monitoring The transceiver offers the ability to monitor important module parameter during operation. All five parameters listed below are continuously monitored for getting information about the current module status. All data is calibrated internally; there is no need for external post processing. Temperature Internally measured temperature data is represented as two's complement of a signed 16-bit value in increments of 1/256 C over a range of -40 to +100 C. Accuracy is better than +/-3 C. Supply Voltage (VCC) Internally measured supply voltage. Represented as a 16-bit unsigned integer with the voltage defined as the full 16 bit value (0 - 65535) with LSB equal to 100 Volt, which yields to a total range of 0 to +6.55 Volts. Accuracy is better than +/-3 %. Laser Bias Current The DFB laser bias current is represented as a 16 bit unsigned integer with the current defined as the full 16bit value (0 - 65535) with LSB equal to 2 A. Accuracy is better than +/-10 %. Optical Transmitter Power TX output power measurement is based on internal monitor diode feedback. Represented as a 16-bit unsigned integer with the power defined as the full 16 bit value (0 - 65535) with LSB equal to 0.1 W. Accuracy is better than +/-3 dB over a range of Pavgmin to Pavgmax. Copyright (c) 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this document at any time without notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0984 Product Specification TITLE PAGE REVISION 10 of 16 TRX10GDL0610C3 (SFP+ LRM Module) AUTHORIZED BY J. Blank A DATE 27 Apr. 2011 CLASSIFICATION UNRESTRICTED Receiver Optical Power RX input power measurement is based on photodiode average current. Represented as a 16-bit unsigned integer with the power defined as the full 16 bit value (0 - 65535) with LSB equal to 0.1 W. Accuracy is better than +/-3 dB over a range of -13 dBm to 0.5 dBm. Note: The specified characteristics are met within the recommended range of operating conditions regarding temperature and voltage. Tx Input Equalizer Adjustment The transceiver is equipped with an equalizer at the transmitter input (at the electrical module interface) to compensate for high frequency signal loss on the host board printed circuit board (Host-PCB) into which the transceiver is plugged and to allow performance optimization in interaction with an host board equalizers (if there is one). There are different module equalizer settings available to adjust the strength of the equalization which may be selected according to the line length of Host-PCB signal tracks. MSB reserved Tx2 Tx1 Content of Register 248 in Table A2h Tx0 reserved reserved reserved LSB reserved Register 248 is always readable, but only writable if a valid passcode has been written to registers 124 - 127 of table A2h before (see paragraph Passcode Entry and Modification below). Reserved bits of register 248 should be written to 0. After power up, the module always comes up with its factory programmed default equalizer setting. Transmitter Input Signal Equalizer Settings: Tx2 0 1 1 1 1 Tx1 X 0 0 1 1 Tx0 X 0 1 0 1 Description Input equalizer off Low equalization Reserved Default equalization (factory setting) Reserved X: don't care Copyright (c) 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this document at any time without notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0984 Product Specification TITLE PAGE REVISION 11 of 16 TRX10GDL0610C3 (SFP+ LRM Module) AUTHORIZED BY J. Blank A DATE 27 Apr. 2011 CLASSIFICATION UNRESTRICTED Programmability Feature Code Register 254 of table A2h indicates the programmability features available and an implementation code to distinguish different implementations. This is a read only register. MSB Tx Equal. reserved Content of Register 254 in Table A2h reserved reserved reserved I-Code2 I-Code1 LSB I-Code0 Tx Equal.: is set to 1 if the transceiver supports programming of the Tx equalizer. I-Code2...0: implementation code. Yields 001b at read out. Passcode Entry and Modification Write-access to the transceiver programmability features and to the customer specific writable area (128 - 247 of table A2h) is granted via a valid passcode which has to be written to the passcode entry field (registers 124-127 of table A2h). Please contact FCI for the factory preset initial passcode. The passcode may be changed to a proprietary one by entering the new one into the passcode change field (registers 120123 of table A2h) after a valid passcode has been written to the passcode entry field. Copyright (c) 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this document at any time without notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0984 Product Specification TITLE PAGE REVISION 12 of 16 TRX10GDL0610C3 (SFP+ LRM Module) AUTHORIZED BY J. Blank A DATE 27 Apr. 2011 CLASSIFICATION UNRESTRICTED Module Outline All dimensions shown are in millimeters. Copyright (c) 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this document at any time without notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0984 Product Specification TITLE PAGE REVISION 13 of 16 A AUTHORIZED BY TRX10GDL0610C3 (SFP+ LRM Module) DATE J. Blank 27 Apr. 2011 CLASSIFICATION UNRESTRICTED Module Safety & Compliance FCI's SFP+ LRM module is designed to meet international standards and requirements. The module is RoHS compliant according to the European Parliament requirements on the restriction of the use of hazardous substances in electrical and electronic equipment (RoHS). The module optical output power meets Class 1 requirements for laser safety. Requirements Standard IEC 60950-1:2001 EN 60950-1:2001 Module Safety RoHS Compliance Laser Safety (Class 1) RoHS 6/6 Directive 2002/95/EC Amendment 4054 (2005/747/EC) CDRH 21 CFR 1040.10 and 1040.11 (according FDA) IEC 60825-1 Rev2 2007 (according IEC) ESD & Electromagnetic Compatibility Requirements EMI (Emission) EMI (Immunity) ESD (Electrical connector) ESD (Module case) ESD (Module case) Standard FCC Part 15 B EN 55022 Class B CISPR 22 30 MHz ... 40 GHz IEC 61000-4-3, 10 MHz ... 1 GHz EIA/JESD22-A114-B MIL-STD 883C Method 3015.7 Air Discharge EN61000-4-2, Criterion B Contact Discharge EN61000-4-2, Criterion B Value At least 6 dB margin to Class B limit No bit errors at sensitivity limit 2 kV 1 kV (SFI signals) 15 kV 8 kV Copyright (c) 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this document at any time without notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0984 Product Specification TITLE PAGE REVISION 14 of 16 TRX10GDL0610C3 (SFP+ LRM Module) AUTHORIZED BY A DATE J. Blank 27 Apr. 2011 CLASSIFICATION UNRESTRICTED Eye Safety This laser based singlemode transceiver is a Class 1 product. It complies with IEC 60825-1 Edition 2 and FDA performance standards for laser products (21 CFR 1040.10 and 1040.11) except for deviations pursuant to Laser Notice 50, dated July 26, 2001. CLASS 1 LASER PRODUCT To meet laser safety requirements the transceiver shall be operated within the Absolute Maximum Ratings. Note: All adjustments have been made at the factory prior to shipment of the devices. No maintenance or alteration to the device is required. Tampering with or modifying the performance of the device will result in voided product warranty. Failure to adhere to the above restrictions could result in a modification that is considered an act of "manufacturing", and will require, under law, recertification of the modified product with the U.S. Food and Drug Administration (ref. 21 CFR 1040.10 (i)). LASER EMISSION DATA Rx Product Top View Tx Laser Emission Wavelength 1310 nm Maximum total output power (as defined by IEC: within 7 mm aperture at 70 mm distance) 15.6 mW / 11.9 dBm Beam divergence (full angle) / NA (half angle) 11 / 0.1 rad Copyright (c) 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this document at any time without notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0984 Product Specification TITLE PAGE REVISION 15 of 16 TRX10GDL0610C3 (SFP+ LRM Module) AUTHORIZED BY J. Blank A DATE 27 Apr. 2011 CLASSIFICATION UNRESTRICTED Ordering Information Application 10G Ethernet Standard IEEE 802.3 10GBASE-LRM Part Number TRX10GDL0610C3 Copyright (c) 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this document at any time without notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0984 Product Specification TITLE PAGE REVISION 16 of 16 TRX10GDL0610C3 (SFP+ LRM Module) AUTHORIZED BY J. Blank A DATE 27 Apr. 2011 CLASSIFICATION UNRESTRICTED REVISION RECORD Rev A Page Description Initial version. EC# Date 27 Apr. 2011 Copyright (c) 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this document at any time without notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission.