https://www.phoenixcontact.com/us/products/1453229 Connector hood - SACB-C-H180-8/16 SCO P - 1453229 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Connector hood with integrated connector, for M12 sensor/actuator boxes with SPEEDCON plastic thread and plug-in screw connection, for 4, 6 or 8 slots Key commercial data Packing unit 1 PCE Custom tariff number 85444290 Country of origin Poland Technical data General Rated voltage 120 V Current carrying capacity per I/O signal 2A Total rated current 10 A Number of slots 8 Sensor/actuator connection system M12-SPEEDCON-socket Ambient conditions Degree of protection IP65 IP67 Ambient temperature (operation) -25 C ... 80 C Master cable data/connection data Connection method Pluggable screw connection Conductor cross section min. (signal) 0.14 mm Conductor cross section max. (signal) 1.5 mm Conductor cross section AWG min. (signal) 26 Conductor cross section AWG max. (signal) 16 Stripping length (signal) 7 mm Conductor cross section min. (energy) 0.14 mm Conductor cross section max. (energy) 1.5 mm 12/2/13 Page 1 / 9 https://www.phoenixcontact.com/us/products/1453229 Connector hood - SACB-C-H180-8/16 SCO P - 1453229 Technical data Master cable data/connection data Conductor cross section AWG min. (energy) 26 Conductor cross section AWG max. (energy) 16 External cable diameter min. 7 mm External cable diameter max. 12 mm Stripping length 50 mm (Master cable) Tightening torque, cover screw 1 Nm Tightening torque, union nut 2.5 Nm Insulation material Housing material PBT Material of contact, master cable side CU alloy Material of contact surface, master cable side Sn Material of the contact carrier on the master cable side PA Sealing material NBR Pin assignment Slot/position = Wire color or connection 1 / 4 (A) = 1 / 4 = WH 1 / 2 (B) = 1 / 2 = GY/PK 2 / 4 (A) = 2 / 4 = GN 2 / 2 (B) = 2 / 2 = RD/BU 3 / 4 (A) = 3 / 4 = YE 3 / 2 (B) = 3 / 2 = WH/GN 4 / 4 (A) = 4 / 4 = GY 4 / 2 (B) = 4 / 2 = BN/GN 5 / 4 (A) = 5 / 4 = PK 5 / 2 (B) = 5 / 2 = WH/YE 6 / 4 (A) = 6 / 4 = RD 6 / 2 (B) = 6 / 2 = YE/BN 7 / 4 (A) = 7 / 4 = BK 7 / 2 (B) = 7 / 2 = WH/GY 8 / 4 (A) = VT 8 / 2 (B) = 8 / 2 = GY/BN 1-8 / 1 (+ 120 V) = UN = BN 1-8 / 3 (0 V) = 0 V = BU 1-8 / 5 (PE) = PE = GN/YE 12/2/13 Page 2 / 9 https://www.phoenixcontact.com/us/products/1453229 Connector hood - SACB-C-H180-8/16 SCO P - 1453229 Classifications eCl@ss eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27449001 ETIM ETIM 4.0 EC002585 ETIM 5.0 EC001855 UNSPSC UNSPSC 6.01 31261501 UNSPSC 7.0901 31261501 UNSPSC 11 31261501 UNSPSC 12.01 31261501 UNSPSC 13.2 31261501 Approvals Approvals Approvals UL Recognized / cUL Recognized / GOST / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized 12/2/13 Page 3 / 9 https://www.phoenixcontact.com/us/products/1453229 Connector hood - SACB-C-H180-8/16 SCO P - 1453229 Approvals cUL Recognized GOST cULus Recognized Accessories Accessories Cable by the meter Master cable ring - SACB- 4X0,34/ 3X0,75-50,0 PUR - 1503328 Master cable for sensor/actuator boxes, with PE conductor, unshielded, material PUR/PVC, 7-pos., 4 x 0.34 mm and 3 x 0.75 mm Master cable ring - SACB- 8X0,5/ 3X1,0-50,0 PUR - 1503357 Master cable for sensor/actuator boxes, with PE conductor, unshielded, material PUR/PVC, 11-pos., 8 x 0.50 mm and 3 x 1.00 mm, length: 50 m Master cable ring - SACB-8X0,5/3X1,0-50,0 HPUR - 1401690 Master cable ring, For use in Distributor boxes, Number of positions: 11, Cable length: 50 m 12/2/13 Page 4 / 9 https://www.phoenixcontact.com/us/products/1453229 Connector hood - SACB-C-H180-8/16 SCO P - 1453229 Accessories Master cable ring - SACB- 6X0,34/ 3X0,75-50,0 PUR - 1503331 Master cable for sensor/actuator boxes, with PE conductor, unshielded, material PUR/PVC, 9-pos., 6 x 0.34 mm and 3 x 0.75 mm Master cable ring - SACB-12X0,5/ 3X1,0-50,0 PUR - 1503360 Master cable for sensor/actuator boxes, with PE conductor, unshielded, material PUR/PVC, 15-pos., 12 x 0.50 mm and 3 x 1.00 mm, length: 50 m Master cable ring - SACB- 8X0,34/ 3X0,75-50,0 PUR - 1503344 Master cable for sensor/actuator boxes, with PE conductor, unshielded, material PUR/PVC, 11-pos., 8 x 0.34 mm and 3 x 0.75 mm Master cable ring - SACB-16X0,5/ 3X1,0-50,0 PUR - 1503373 Master cable for sensor/actuator boxes, with PE conductor, unshielded, material PUR/PP, 19-pos., 16 x 0.50 mm and 3 x 1.00 mm, length: 50 m Master cable ring - SACB-16X0,5/ 3X1,0-200,0 PUR - 1559893 Master cable for sensor/actuator boxes, with PE conductor, unshielded, material PUR/PP, 19-pos., 16 x 0.50 mm and 3 x 1.00 mm, length: 200 m on drum 12/2/13 Page 5 / 9 https://www.phoenixcontact.com/us/products/1453229 Connector hood - SACB-C-H180-8/16 SCO P - 1453229 Accessories Master cable ring - SACB-16X0,5/ 3X1,0-50,0 VPUR - 1430938 Master cable for sensor/actuator boxes, with PE conductor, unshielded, material PUR/PP, 19-pos., 16 x 0.50 mm and 3 x 1.00 mm, length: 50 m Device marking Contactor marker - zack marker strip - SS-ZB 17,5 WH - 0804963 Contactor marker - zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into flat marker groove, Lettering field: 17.5 x 8 mm Contactor marker - zack marker strip - SS-ZB 17,5 YE - 0804976 Contactor marker - zack marker strip, Strip, yellow, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into flat marker groove, Lettering field: 17.5 x 8 mm Header with metric measurement slots Sensor/actuator box header - SACB-4/ 4-L-C GG SCO P - 1452864 Sensor/actuator box header, Connection method: M12-SPEEDCON-socket Plastic, Number of slots: 4, Number of positions: 4, Slot assignment: Single, Status indication: Yes, pnp; Master cable connection: Pluggable screw connection, Shielding: No Sensor/actuator box header - SACB-4/ 8-L-C GG SCO P - 1452877 Sensor/actuator box header, Connection method: M12-SPEEDCON-socket Plastic, Number of slots: 4, Number of positions: 5, Slot assignment: Double, Status indication: Yes, pnp; Master cable connection: Pluggable screw connection, Shielding: No 12/2/13 Page 6 / 9 https://www.phoenixcontact.com/us/products/1453229 Connector hood - SACB-C-H180-8/16 SCO P - 1453229 Accessories Sensor/actuator box header - SACB-6/ 6-L-C GG SCO P - 1452880 Sensor/actuator box header, Connection method: M12-SPEEDCON-socket Plastic, Number of slots: 6, Number of positions: 4, Slot assignment: Single, Status indication: Yes, pnp; Master cable connection: Pluggable screw connection, Shielding: No Sensor/actuator box header - SACB-6/12-L-C GG SCO P - 1452893 Sensor/actuator box header, Connection method: M12-SPEEDCON-socket Plastic, Number of slots: 6, Number of positions: 5, Slot assignment: Double, Status indication: Yes, pnp; Master cable connection: Pluggable screw connection, Shielding: No Sensor/actuator box header - SACB-8/ 8-L-C GG SCO P - 1452903 Sensor/actuator box header, Connection method: M12-SPEEDCON-socket Plastic, Number of slots: 8, Number of positions: 4, Slot assignment: Single, Status indication: Yes, pnp; Master cable connection: Pluggable screw connection, Shielding: No Sensor/actuator box header - SACB-8/16-L-C GG SCO P - 1452916 Sensor/actuator box header, Connection method: M12-SPEEDCON-socket Plastic, Number of slots: 8, Number of positions: 5, Slot assignment: Double, Status indication: Yes, pnp; Master cable connection: Pluggable screw connection, Shielding: No Labeled device marker Contactor marker - zack marker strip - SS-ZB 17,5 WH CUS - 0824468 Contactor marker - zack marker strip, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into flat marker groove, Lettering field: 17.5 x 8 mm 12/2/13 Page 7 / 9 https://www.phoenixcontact.com/us/products/1453229 Connector hood - SACB-C-H180-8/16 SCO P - 1453229 Accessories Contactor marker - zack marker strip - SS-ZB 17,5 YE CUS - 0824469 Contactor marker - zack marker strip, Can be ordered: Strip, yellow, Labeled according to customer specifications, Mounting type: Snap into flat marker groove, Lettering field: 17.5 x 8 mm Screwdriver tools Philips screwdriver - SZK PZ2 VDE - 1206463 Screwdriver, PZ crosshead, VDE insulated, size: PZ 2 x 100 mm, 2-component grip, with non-slip grip Tool - SAC BIT HOOD-W 24 - 1212486 Nut for assembling pressure nuts with 24 mm wrench size, for 4 mm hexagonal drive Adapter insert - TSD-M SAC-BIT ADAPTER - 1212600 Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits Torque tool Torque screwdriver - TSD-M 1,2NM - 1212224 Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 0.3 1.2 Nm 12/2/13 Page 8 / 9 https://www.phoenixcontact.com/us/products/1453229 Connector hood - SACB-C-H180-8/16 SCO P - 1453229 Accessories Torque screwdriver - TSD 25 SAC - 1212315 Torque screwdriver, with preset torque of 2.5 Nm and 4 mm hexagonal drive for the pressure nut of the connector hood Torque screwdriver - TSD-M 3NM - 1212225 Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 1.2 3 Nm (c) Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 12/2/13 Page 9 / 9