A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components www.standexmeder.com Series Datasheet - SIL Reed Relays SIL Series Reed Relays Features: Dual In-Line IC Compatible Relay, Available with Dielectric Strength 4.25VDC Applications: General Purpose, Measuring and Testing Devices & Others Markets: Telecommunications, Test and Measurement, Security & Others SIL 00-0X00-00X Part Description: Nominal Voltage Contact QTY Contact Form Switch Model Pin Out 03, 05, 12, 15, 24 1 A, B, C 31, 72, 75, 90 71, 72, 73, 74, Customer Options Contact Data Option L, M, D, Q (HR = High Resistance Version) Switch Model Rated Power (max.) Any DC combination of V&A not to exceed their individual max.'s Switching Voltage (max.) DC or peak AC Switching Current (max.) DC or peak AC Carry Current (max.) DC or peak AC Contact Resistance (max.) @ 0.5V & 50mA Breakdown Voltage (min.) According to EN60255-5 Operating Time (max.) Incl. Bounce; Measured with w/ Nominal Voltage Release Time (max.) Measured with no Coil Excitation Insulation Resistance (typ.) Rh<45%, 100V Test Voltage Capacitance (typ.) @ 10kHz across open Switch USA: Europe: Asia: +1.866.782.6339 +49.7731.8399.0 +86.21.37820625 Unit 31 72 75 90 50 10 10 10 W 500 200 500 175 V 2 0.5 0.5 0.5 A 2 1.0 1.0 1.2 A 80 100 200 150 mOhm 2,1 0.25 0.6 0.2 kVDC 1,2 0.5 0.5 0.7 ms 1 0.1 0.1 1.5 ms 1010 1010 1010 109 GOhm 0,3 0.3 0.4 1.0 pF salesusa@standexmeder.com info@standexmeder.com salesasia@standexmeder.com Modifications in the sense of technical progress are reserved. Version 01 27.01.2015 A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components www.standexmeder.com Series Datasheet - SIL Reed Relays Coil Data Contact Switch Form Model Unit Coil Voltage (nom.) Coil Resistance (typ.) Pull-In Voltage (max.) Drop-Out Voltage (min.) Nominal Coil Power (typ.) VDC 05 12 03* 05 12 15 24 05 HR 12 HR 05 12 Ohm 80 500 500 500 (200) 1,000 2,000 2,000 1,000 2,000 200 1,000 VDC 3.5 8.4 2.1 3.5 8.4 10.5 16.8 3.5 8.4 3.5 8.4 VDC 0.75 1.8 0.45 0.75 1.8 2.2 3.6 0.75 1.8 0.75 1.8 mW 312 288 18 50 (125) 145 110 290 25 70 125 145 31 1A 72, 75 72 1B, 1C** 90 The Pull-In / Drop-Out Voltage and Coil Resistance will change at rate of 0.4% per C. * Coil Voltage 03 only available with Switch Model 72. **Contact Form 1C90 only available with Coil Voltage 05 () Data in () are valid for Switch Models 75 and 84. Environmental Data SIL Reed Relay Unit Shock Resistance (max.) 50 g 20 g Operating Temperature -20 to 70 C Storage Temperature Soldering Temperature (max.) -35 to 95 C 260 C 1/2 sine wave duration 11ms Vibration Resistance (max.) 5 sec. max. Handling & Assembly Instructions Switching inductive and/or capacitive loads create voltage and/or current peaks, which may damage the relay. Protective circuits need to be used. Life Test Data *Load increase reduces life expectancy of Reed Switches External magnetic fields needs to be taken into consideration, including a too high packing density. This may influence the relays' electrical characteristics. Mechanical shock impacts e.g. dropping the relays may cause immediate or post-installation failure. Wave soldering: maximum 260/5 seconds. Reflow soldering: Recommendations given by the soldering paste manufacturer need to be considered as well as the temperature limits of other components/processes. USA: Europe: Asia: +1.866.782.6339 +49.7731.8399.0 +86.21.37820625 salesusa@standexmeder.com info@standexmeder.com salesasia@standexmeder.com Modifications in the sense of technical progress are reserved. Version 01 27.01.2015 A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components www.standexmeder.com Series Datasheet - SIL Reed Relays Glossary Contact Form Form A NO = Normally Open Contacts SPST = Single Pole Single Throw Form B NC = Normally Closed Contacts SPST = Single Pole Single Throw Form C Changeover SPDT = Single Pole Double Throw Pin Out Top View 2.54mm [0.10"] pitch grid USA: Europe: Asia: +1.866.782.6339 +49.7731.8399.0 +86.21.37820625 salesusa@standexmeder.com info@standexmeder.com salesasia@standexmeder.com Modifications in the sense of technical progress are reserved. Version 01 27.01.2015