T-1 (3mm) SOLID STATE LAMP Part Number: L-7104LID High Efficiency Red Features Description z Low power consumption. The High Efficiency Red source color devices are made with z Popular T-1 diameter package. Gallium Arsenide Phosphide on Gallium Phosphide Orange z General purpose leads. Light Emitting Diode. z Reliable and rugged. z Long life - solid state reliability. z Available on tape and reel. z Low current IF=2mA operating. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAC2642 REV NO: V.11A DATE: MAY/06/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101029029 Selection Guide Part No. Dice L-7104LID Iv (mcd) [2] @ 2mA Lens Type High Efficiency Red (GaAsP/GaP) Min. Typ. 0.35 1 *0.2 *0.6 Viewing Angle [1] 21/2 40 Red Diffused Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength High Efficiency Red D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 627 nm IF=2mA High Efficiency Red 617 nm IF=2mA Spectral Line Half-width High Efficiency Red 45 nm IF=2mA C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red 1.7 2.5 V IF=2mA IR Reverse Current High Efficiency Red 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter High Efficiency Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA 5 V Reverse Voltage Operating/Storage Temperature -40C To +85C Lead Solder Temperature [2] 260C For 3 Seconds Lead Solder Temperature [3] 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAC2642 REV NO: V.11A DATE: MAY/06/2013 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101029029 High Efficiency Red L-7104LID SPEC NO: DSAC2642 REV NO: V.11A DATE: MAY/06/2013 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101029029 PACKING & LABEL SPECIFICATIONS L-7104LID SPEC NO: DSAC2642 REV NO: V.11A DATE: MAY/06/2013 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101029029 SPEC NO: DSAC2642 REV NO: V.11A DATE: MAY/06/2013 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101029029 Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAC2642 REV NO: V.11A DATE: MAY/06/2013 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101029029