Find a Retailer
SHOP LEARN BLOG SUPPORT 0LOG IN REGISTER
find products, tutorials, etc...
EDUCATION FORUM
Need Help?
HOME / PRODUCT CATEGORIES / BIOMETRICS / SPARKFUN AIR QUALITY BREAKOUT - CCS811
images are CC BY 2.0
SHARE
Previous Versions
SparkFun Air Quality Breakout - CCS811
SEN-14193
4
DESCRIPTION FEATURES DOCUMENTS
The CCS811 Air Quality Breakout is a digital gas sensor solution that senses a
wide range of Total Volatile Organic Compounds (TVOCs), including equivalent
carbon dioxide (eCO ) and metal oxide (MOX) levels. VOCs are often
categorized as pollutants and/or sensory irritants and can come from a variety
of sources like construction materials (paint, carpet, etc.), machines (copiers,
processors, etc.) and even people (breathing, smoking, etc.). This breakout is
intended for indoor air quality monitoring in personal devices such as watches
and phones, but we’ve put it on a breakout board so you can use it as a regular
IC device.
The onboard CCS811 supports multiple measurement modes that have been
optimized for low-power consumption during an active sensor measurement and
idle mode extending battery life in portable applications. We have broken out
each necessary pin on the CCS811 as well as additional pins to add your own
NTC Thermistor to determine the temperature of the CCS811’s surroundings,
which can be used to help compensate the readings.
Note: Please be aware that the CCS811 datasheet recommends a burn-in of 48
hours and a run-in of 20 minutes (you must allow 20 minutes for the sensor to
warm up and output valid data).
GET STARTED WITH THE CCS811 BREAKOUT GUIDE
2
2
Tags
BIOMETRICS BREAKOUT CCS811 CO2 SENSOR SPARKX TVOC VOC
WEATHER
SparkFun Air Quality Breakout - CCS811 Product Help and Resources
TUTORIALS VIDEOS SKILLS NEEDED
CCS811 Air Quality
Breakout Hookup Guide
APRIL 27, 2017
This tutorial shows you how to get
data from a CCS811 breakout
board with the I2C interface.
CCS811/BME280 (Qwiic)
Environmental Combo
Breakout Hookup Guide
SEPTEMBER 8, 2017
Sense various environmental
conditions such as temperature,
humidity, barometric pressure,
eCO2 and tVOCs with the
CCS811 and BME280 combo
breakout board.