3.2x1.6 mm SMD CHIP LED LAMP ATTENTION APK3216PBC-F01 BLUE OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features z3.2mmx1.6mm zLOW Description SMT LED, 1.1mm THICKNESS. POWER CONSUMPTION. zWIDE zIDEAL VIEWING ANGLE. COLORS AND LENS TYPES AVAILABLE. zPACKAGE z RoHS on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. FOR BACK LIGHT AND INDICATOR. zVARIOUS The Blue source color devices are made with InGaN : 2000PCS / REEL. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically COMPLIANT. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAF1364 REV NO: V.1 DATE: MAR/29/2005 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1204000163-01 Selection Guide Part No. Dice APK3216PBC-F01 Iv (mcd) @ 20mA Lens Type BLUE(InGaN) Viewing Angle Min. Typ. 21/2 36 70 90 WATER CLEAR Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device peak Peak Wavelength Blue D Dominant Wavelength 1/2 Typ. Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 25 nm IF=20mA C Capacitance Blue 65 pF VF=0V;f=1MHz VF Forward Voltage Blue 3.65 4.2 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Blue Units Power dissipation 102 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA 5 V Reverse Voltage Operating/Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF1364 REV NO: V.1 DATE: MAR/29/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1204000163-01 Blue APK3216PBC-F01 SPEC NO: DSAF1364 REV NO: V.1 DATE: MAR/29/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1204000163-01 APK3216PBC-F01 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF1364 REV NO: V.1 DATE: MAR/29/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1204000163-01