0,2 0,3 12,5 A 10,8 M3 oder/ or Nietmutter / riveted nut : l=3.7/5.6/6.0/6.3 #4-40 A M3 oder/ or M3 oder/ or 0,86 Einpressbolzen / Gewindehulse press-fit bolt / threaded sleeve : #4-40 Einpressbolzen press-fit bolt : 7,67 #4-40 5,94 cross section A-A Schnitt A-A / 14,48 14,48 3,2 41,3 53 min. 4,5 0,3 3,2 min. 3 6,3 0,3 l (min. 2.5) 6,4 6,3 (5.9) Nietmutter mit Klemmteil Abstandshulse / standoff : 3,2 M3 Gehause genietet riveted housing : 3,05 clamping thread : +0,13 114181 124642 8,3 +0,2 5,8 38,9 47 Polzahl / No. of contacts : Bauart / Zubehor / Logo : Pressfit metal plating of plated-through hole fur Einpresskontakt Zeichnung 114110 / for press-fit contact drawing 114110 fur Einpressbolzen Zeichnung 114109 / for press-fit bolt drawing 114109 6.3 mm 201=0.8m (30 in) Au CONTACT, GOLD/LEAD TERMINAL ERNI Refer to table on page 2 Special : Board hole pattern 144059 Schichtaufbau im metallisierten Loch / Information: Class : Accessory : Sonderausfuhrung / Leiterplattenbohrbild 144059 / Refer to table on page 2 5W5 Anforderungsstufe / Aufdruck / 0,2 Terminal Length : Type : 6,3 +0,2 Terminal Type : Anschlulange / max 1,5 6,3 Refer to table on page 2 Part No. : Anschluart / 3,9 Refer to table on page 2 Tolerances Scale 2:1 All Dimensions in mm Consider protection memo from DIN 34 Ident-Nr. / +0,3 All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. Date TMC-P 5W5-EP36-6,3-5 TMC-P 5W5-EP36-6,3-5 www.ERNI.com Index Designation M:00022982.SZN 054993 TMCP I Ordering Information D-Sub Connector High Power Pressfit Vertical Male Assembly Height 6.3mm Number of Pins 5W5 Accessory Termination Side: Pressfit bolt M3 134442 Accessory Termination Side: Pressfit bolt #4-40 134443 Accessory Mating Side: Threaded sleeve M3 Accessory Termination Side: Pressfit bolt 134504 Accessory Mating Side: Threaded sleeve #4-40 134505 Ordering Information press-in tools Number of Pins 5W5 Upper Tool with Quick Change Device Lower Tool 220283 220147 www.erni.com Accessory Termination Side: Pressfit bolt