SNAP-OMR6-C - OPTO 22 - Datasheet.Live

SNAP Mechanical Power

Relay Output Modules

PAGE

1

DATA SHEET

Form 1967-160920

SNAP Mechanical Power Relay Output Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2011–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Features

Four isolated channels

Each channel switches up to 6 A at 250 VAC or 30 VDC

Channel-specific LEDs

Operating temperature: -20 to 70 °C

UL approved

Description

SNAP mechanical power relay output modules offer four

channels for switching loads of up to 6 amps at 250 VAC or

30 VDC.

These modules handle more current than other SNAP output

modules. Each contact can carry 6 amps, and having more

than one channel on at the same time does not reduce the

amount of power each channel can carry.

These are form C modules, so each of the four mechanical

contacts can be wired as normally open or normally closed.

Fusing is not provided; you must provide fusing when wiring

the module.

SNAP mechanical power relay output modules provide

channel-to-channel isolation. These modules can

mechanically switch either AC or DC loads, potentially

reducing the number of modules needed.

Additionally, SNAP mechanical power relay output modules

offer little or no leakage current when the contacts are open.

In contrast, possible leakage current in solid-state SNAP AC

output modules might cause an electronic input to stick in the

ON state. These modules are suitable for piloting electronic

coil contactors.

NOTE: These modules may not be suitable for low-level switching.

NOTE: Transient protection is recommended for inductive loads.

For DC loads, install a reverse-biased diode, such as an 1N4005 (or

equivalent) at the load.

Two mechanical power relay output modules are available:

the SNAP-OMR6T-C and the SNAP-OMR6-C. They are

identical except that the SNAP-OMR6-C does not include

integrated transient suppression.

The SNAP-OMR6T-C is recommended for most applications,

including applications with long wire runs.

NOTE: For very high inductive loads, additional transient

protection is recommended.

When using the SNAP-OMR6-C, you must provide transient

suppression at the load. If long wire runs are used, transient

suppression is required at the terminals of the module as well.

NOTE: SNAP-OMR6-C modules manufactured prior to March 2014

have four black field wiring connectors; newer modules have a

single large gray connector as shown above. Field connector

wiring and module function are identical. Note torque differences

in “Specifications” on page 3.

Compatibility

Part of the SNAP PAC System, these modules mount on a

SNAP PAC rack with a SNAP PAC brain or rack-mounted

controller. Analog, digital, and serial I/O modules can all be on

the same rack. This kind of I/O unit is also well suited for

PC-based control or for use as intelligent remote I/O for an

Allen-Bradley PLC system.

PAC Project—The SNAP-OMR6T-C is supported in PAC

Project R9.4009 and higher. The SNAP-OMR6-C is supported in

PAC Project R9.2 and higher.

Brains—SNAP mechanical power relay output modules are

compatible with all SNAP PAC brains and rack-mounted

controllers, including both standard wired models and

Wired+Wireless™ models.

Part Number

Part Description

SNAP-OMR6T-C

SNAP 4-channel Mechanical Power Relay

Module, SPDT (Form C), with Integrated

Transient Suppression

SNAP-OMR6-C SNAP 4-channel Mechanical Power Relay

Module, SPDT (Form C)

SNAP-OMR6T-C

SNAP Mechanical Power Relay Output Modules

PAGE

2

DATA SHEET

Form 1967-160920

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2011–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Legacy hardware—These modules are also compatible with

SNAP Ultimate, SNAP Ethernet, and SNAP Simple brains, as

well as other SNAP brains such as the serial B3000 and the

B3000-B. They can be mounted on both B-series and M-series

mounting racks.

SNAP-OMR6-A

A previous module, the form A SNAP-OMR6-A, is no longer

available. Use the SNAP-OMR6T-C as a pin-identical, drop-in

replacement for this obsolete module.

Specifications and wiring diagrams for the obsolete

SNAP-OMR6-A are included in this data sheet for reference

only.

Installation

The following diagram shows part of a SNAP mounting rack.

Modules snap securely into place in the row of connectors on

the rack. Each module connector is numbered, starting with

position zero.

1. Place the rack so that the module connector numbers

are right-side up, with zero on the left, as shown in the

diagram above. (If your rack has screw connectors, the

screw connectors will be at the bottom.)

NOTE: Check the data sheet or user’s guide for the brain or

on-the-rack controller you are using to determine any

restrictions on module placement.

2. Position the module over the module connector,

aligning the small slot at the base of the module with

the retention bar on the rack. When positioning modules

next to each other, be sure to align the male and female

module keys at the tops of the modules before snapping

a module into position.

3. With the module correctly aligned, push on the module

to snap it into place.

4. Use standard 4-40 x 1/2 truss-head Phillips hold-down

screws (provided) to secure both sides of each module.

CAUTION: Do not overtighten screws. Torque for hold-

down screws: 4 in-lb (0.45 N-m)

5. Follow the wiring diagrams on page 5 to attach the

module to field devices. Torque for connector screws: 1.7

in-lb (0.2 N-m)

Modules require a special tool (provided) for removal.

Module

position zero Module connectors

Processor connector Retention bar

SNAP Mechanical Power Relay Output Modules

SNAP Mechanical Power Relay Output Modules DATA SHEET

Form 1967-160920

PAGE

3

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2011–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Specifications

SNAP-OMR6-C SNAP-OMR6T-C

Field Side Ratings (each channel)

Contact Configuration Form C (SPDT, normally open or closed) Form C (SPDT, normally open or closed)

Line Voltage - Range 0–250 VAC or 5–30 VDC 0–250 VAC or 5–30 VDC

Current Rating 6 amps switching @ 250 VAC / 30 VDC 6 amps switching @ 250 VAC / 30 VDC

Surge Current 6 amps 6 amps

Minimum Load 5 VDC, 10 mA 5 VDC, 10 mA

Contact Resistance  100 milliohms  100 milliohms

Leakage Current none < 1 microamp @ 250 VAC

Clamping Voltage (for transient

suppression) External transient suppression required 440 V nominal

Duty Cycle -- Not applicable -- 1 Hz

Switching Power 1500 VA / 144 W (DC) 1500 VA / 144 W (DC)

Peak Blocking Voltage 250 VAC @ 360 V

pk

250 VAC @ 360 V

pk

Channel-to-channel isolation 300 VAC (1500 Vtransient) 300 VAC (1500 Vtransient)

Logic Side Ratings

Pickup Voltage 1 V @ 2 mA 1 V @ 2 mA

Dropout Voltage 4 VDC 4 VDC

Control Resistance 220 ohms 220 ohms

Logic Supply Voltage 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC

Logic Supply Current 160 mA maximum 160 mA maximum

Module Ratings

Number of Channels Per Module 4 4

Turn-on Time 8 milliseconds 8 milliseconds

Turn-off Time 8 milliseconds 8 milliseconds

Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m)

Torque, connector screws Single gray connector: 5.26 in-lb (0.6 N-m)

Black connectors: 1.7 in-lb (0.2 N-m) 5.26 in-lb (0.6 N-m)

Temperature -20 to 70 °C, operating

-30 to 85 °C, storage

-20 to 70 °C, operating

-30 to 85 °C, storage

Agency Approvals UL, CE, RoHS, DFARS UL, CE RoHS, DFARS

Mechanical Life 10 x 106 operations 10 x 106 operations

Operational Life 30 x 103 operations 30 x 103 operations

Warranty 30 months 30 months

SNAP Mechanical Power Relay Output Modules

PAGE

4

DATA SHEET

Form 1967-160920

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2011–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Specifications (continued)

IMPORTANT: Specifications for the SNAP-OMR6-A are

included for reference only. This module is no longer available.

SNAP-OMR6-A [Obsolete]

Field Side Ratings (each channel)

Contact Configuration Form A (SPST, normally open)

Line Voltage - Range 0–250 VAC or 0–30 VDC

Current Rating 6 amps switching @ 250 VAC / 30 VDC

Surge Current 6 amps

Minimum Load 5 VDC, 10 mA

Contact Resistance  100 milliohms

Switching Power 1500 VA / 144 W (DC)

Peak Blocking Voltage 250 VAC / 30 VDC

Channel-to-channel isolation 300 VAC (1500 Vtransient)

Logic Side Ratings

Pickup Voltage 1 V @ 2 mA

Dropout Voltage 4 VDC

Control Resistance 220 ohms

Logic Supply Voltage 5 VDC ± 0.25 VDC

Logic Supply Current 160 mA maximum

Module Ratings

Number of Channels Per Module 4

Turn-on Time 8 milliseconds

Turn-off Time 8 milliseconds

Torque, hold-down screws 4 in-lb (0.45 N-m)

Torque, connector screws Single gray connector: 5.26 in-lb (0.6 N-m)

Black connectors: 1.7 in-lb (0.2 N-m)

Temperature -20 to 70 °C, operating

-30 to 85 °C, storage

Agency Approvals CE, RoHS, DFARS

Mechanical Life 10 x 106 operations

Operational Life 30 x 103 operations

Warranty 30 months

SNAP Mechanical Power Relay Output Modules

SNAP Mechanical Power Relay Output Modules DATA SHEET

Form 1967-160920

PAGE

5

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2011–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Wiring Diagrams

NO NC

C

CH3

SNAP-OMR6T-C Field Connections

Note: User must provide own fusing.

NO NC

C

CH2

NO NC

C

CH1

NO NC

C

CH0

NOTE: External transient protection is recommended for highly

inductive loads.

See page 6 for SNAP-OMR6-C and page 7 for SNAP-OMR6-A.

SNAP Mechanical Power Relay Output Modules

PAGE

6

DATA SHEET

Form 1967-160920

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2011–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Wiring Diagrams (Continued)

SNAP-OMR6-C Field Connections - Older Terminals (black)

Note: User must provide own fusing.

NO NC

C

CH3

SNAP-OMR6-C Field Connections - Newer Terminal (gray)

Note: User must provide own fusing.

NO NC

C

CH2

NO NC

C

CH1

NO NC

C

CH0

NO NC

C

CH3

NO NC

C

CH2

NO NC

C

CH1

NO NC

C

CH0

NOTE: Transient protection is recommended for inductive loads.

NOTE: For DC loads, install a reverse-biased diode, such as an 1N4005

(or equivalent) at the load.

NOTE: Transient protection is recommended for inductive loads.

NOTE: For DC loads, install a reverse-biased diode, such as an 1N4005

(or equivalent) at the load.

SNAP Mechanical Power Relay Output Modules

SNAP Mechanical Power Relay Output Modules DATA SHEET

Form 1967-160920

PAGE

7

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2011–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Wiring Diagrams (Continued)

SNAP-OMR6-A Field Connections - Older Terminals (black)

Note: User must provide own fusing.

NO NC

C

CH3

SNAP-OMR6-A Field Connections - Newer Terminal (gray)

Note: User must provide own fusing.

NO NC

C

CH2

NO NC

C

CH1

NO NC

C

CH0

NO NC

C

CH3

NO NC

C

CH2

NO NC

C

CH1

NO NC

C

CH0

NOTE: Transient protection is recommended for inductive loads.

NOTE: For DC loads, install a reverse-biased diode, such as an 1N4005

(or equivalent) at the load.

NOTE: Transient protection is recommended for inductive loads.

NOTE: For DC loads, install a reverse-biased diode, such as an 1N4005

(or equivalent) at the load.

SNAP Mechanical Power Relay Output Modules

PAGE

8

DATA SHEET

Form 1967-160920

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2011–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Dimensional Drawings

Newer field wiring terminal: one 12-position connector

Older field wiring terminals: four 3-position connectors

SNAP Mechanical Power Relay Output Modules

SNAP Mechanical Power Relay Output Modules DATA SHEET

Form 1967-160920

PAGE

9

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2011–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Dimensional Drawings (Continued)

IMPORTANT: The mounting rack connector has 24 pins; the module

connector has 20 pins. The extra pins on the mounting rack connector

prevent misalignment of the module during installation.

SNAP Mechanical Power Relay Output Modules

PAGE

10

DATA SHEET

Form 1967-160920

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2011–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Dimensional Drawings (Continued)

More About Opto 22

www.opto22.com • Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • Form 1335-160810

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2013–2016 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Products

Opto 22 develops and manufactures reliable, easy-to-use, open

standards-based hardware and software products deployed

worldwide.

Industrial automation, process control, building automation,

industrial refrigeration, remote monitoring, data acquisition,

Industrial Internet of Things (IIoT), and information technology

applications all rely on Opto 22.

groov

Monitor and control your

equipment from anywhere

using your smartphone or

tablet with groov. Build your

own mobile app easily—just

drag, drop, and tag. No

programming or coding. Visit

groov.com

for more

information and your free trial.

SNAP PAC System

Developer- and IIoT-ready, the SNAP PAC System connects

physical assets to databases and applications using open

standards. The SNAP PAC System consists of four integrated

components:

•SNAP PAC controllers

•PAC Project™ Software Suite

•SNAP PAC brains

•SNAP I/O™

SNAP PAC Controllers

SNAP PAC programmable

automation controllers handle a

wide range of digital, analog, and

serial functions for data collection,

remote monitoring, process control,

and discrete and hybrid manufacturing.

For IIoT applications and easier integration with company

systems, standalone and rack-mounted SNAP PACs include a

built-in HTTP/HTTPS server and

RESTful API

(application

program interface). The REST API gives you secure, direct access

to I/O and variable data using your choice of programming

languages. No middleware, protocol converters, drivers, or

gateways needed.

Based on open Ethernet and Internet Protocol (IP) standards,

SNAP PACs make it easier to build or extend a system without the

expense and limitations of proprietary networks and protocols.

PAC Project Software Suite

Opto 22’s PAC Project Software Suite offers full-featured, cost-

effective control programming, HMI (human machine interface),

OPC server, and database connectivity software.

Control programming includes both easy-to-learn flowcharts and

optional scripting. Commands are in plain English; variables and

I/O point names are fully descriptive.

PAC Project Basic offers control and HMI tools and is free for

download on our website,

www.opto22.com

. PAC Project

Professional, available for separate purchase, adds one SoftPAC

software-based controller, OptoOPCServer, OptoDataLink,

options for controller redundancy or segmented networking, and

support for legacy Opto 22 serial

mistic™

I/O units.

SNAP PAC Brains

While SNAP PAC controllers provide central control and data

distribution, SNAP PAC brains provide distributed intelligence for

I/O processing and communications. Brains offer analog, digital,

and serial functions, including thermocouple linearization, local

PID loop control, watchdog, totalizing, and much more.

SNAP I/O

I/O provides the local connection to sensors and equipment.

Opto 22 SNAP I/O offers 1 to 32 points of reliable I/O per module.

Analog, digital, and serial modules are mixed on one mounting

rack and controlled by a SNAP PAC brain or rack-mounted PAC.

Quality

Founded in 1974, Opto 22 has established a worldwide

reputation for high-quality products. All are made in the U.S.A. at

our manufacturing facility in Temecula, California.

Because we test each product twice before it leaves

our factory, rather than only testing a sample of each

batch, we can guarantee most solid-state relays and

optically isolated I/O modules for life.

Free Product Support

Opto 22’s California-based Product Support Group

offers free, comprehensive technical support for

Opto 22 products from engineers with decades of training and

experience. Support is available in English and Spanish by phone

or email, Monday–Friday, 7 a.m. to 5 p.m. PST.

Additional support is always available on our website: how-to

videos, OptoKnowledgeBase, self-training guide, troubleshooting

and user’s guides, and OptoForums.

In addition, hands-on training is available for free at our Temecula,

California headquarters, and you can

register online

.

Purchasing Opto 22 Products

Opto 22 products are sold directly and through a worldwide

network of distributors, partners, and system integrators.

For more information, contact Opto 22 headquarters at

800-321-6786 (toll-free in the U.S. and Canada) or 951-695-3000,

or visit our website at

www.opto22.com

.

www.opto22.com