1165921 Complementary silicon power transistors. The MJ15004 powerBaseTM power transistors designed for high power audio, disk head positioners and other linear applications. Features: * * * * (TO-3) High safe operating area (100% tested) - 5.0A at 50V. For low distortion complementary designs. High DC current gain = hFE = 25 (minimum) at IC = 5A dc. Pb-free packages. Dimensions A Maximum 1.550 (39.37) Reference B - 1.050 (26.67) C 0.250 (6.35) 0.335 (8.51) D 0.038 (0.97) 0.043 (1.09) E 0.055 (1.40) 0.070 (1.77) G 0.430 (10.92) BSC H 0.215 (5.46) BSC K Style 1: Pin 1. Base 2. Emitter Collector (Case) Minimum L 0.440 (11.18) 0.665 (16.89) BSC - 0.830 (21.08) Q 0.151 (3.84) 0.165 (4.19) V (TO-3) Case 1-07 Style 1 0.480 (12.19) N U 20 Ampere Darlington Power Transistors Complementary Silicon 140 Volts, 250 Watts 1.187 (30.15) BSC 0.131 (3.33) 0.188 (4.77) Dimensions : Inches (Millimetres) http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Page <1> 22/10/08 V1.1 1165921 Maximum Ratings Rating Symbol Value Unit Collector-Emitter Voltage VCEO Collector-Base Voltage VCBO Emitter-Base Voltage VEBO 5 Collector Current-Continuous IC 20 Base Current-Continuous IB 5 Emitter Current-Continuous IE 25 Total Power Dissipation at TC = 25C Derate above 25C PD 250 1.43 W W/C TJ, Tstg -65 to +200 C Symbol Maximum Unit RJC 0.70 C/W TL 265 C 140 Operating and Storage Junction Temperature Range V dc A dc Thermal Characteristics Characteristics Thermal Resistance, Junction-to-Case Maximum Lead Temperature for Soldering Purposes 1/16 inches from Case for 10 seconds Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. Electrical Characteristics (TC = 25C unless otherwise noted) Characteristic Symbol Minimum Maximum Unit VCEO (sus) 140 - V dc Collector Cut off Current (VCE = 140V dc, VBE (off) = 1.5V dc) (VCE = 140V dc, VBE (off) = 1.5V dc, TC = 150C) ICEX - 100 2 Collector Cut off Current (VCE = 140V dc, IB = 0) ICEO - 250 Emitter Cut off Current (VEB = 5V dc, IC = 0) IEBO - 100 Off Characteristics Collector-Emitter Sustaining Voltage (1) (lC = 200mA dc, lB = 0) A dc mA dc A dc http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Page <2> 22/10/08 V1.1 1165921 Electrical Characteristics (TC = 25C unless otherwise noted) Second Breakdown Second Breakdown Collector Current with Base Forward Biased (VCE = 50V dc, t = 1s (non repetitive) (VCE = 100V dc, t = 1s (non repetitive) IS/b 5.0 1.0 - A dc hFE 25 150 - Collector-Emitter Saturation Voltage (lC = 5A dc, IB = 0.5A dc) VCE (sat) - 1.0 Base-Emitter On Voltage (lC = 5A dc, VCE = 2V dc) VBE (on) - 2.0 fT 2.0 - MHz Cob - 1000 pF On Characteristics DC Current Gain (lC = 5A dc, VCE = 2V dc V dc Dynamic Characteristics Current-Gain Bandwidth Product (IC = 0.5A dc, VCE = 10V dc, ftest = 0.5MHz) Output Capacitance (VCB = 10V dc, IE = 0, ftest = 1MHz) 1. Pulse Test: Pulse Width = 300s, Duty Cycle 2%. Active Region DC Safe Operating Area IC, Collector Current (Amperes) There are two limitations on the power handling ability of a transistor: average junction temperature and second breakdown. Safe operating area curves indicate IC - VCE limits of the transistor that must be observed for reliable operation; i.e., the transistor must not be subjected to greater dissipation than the curves indicate. The data is based on TJ (pk) = 200C; TC is variable depending on conditions. At high case temperatures, thermal limitations will reduce the power that can be handled to values less than the limitations imposed by second breakdown. VCE, Collector-Emitter Voltage (Volts) Part Number Table Description Part Number Transistor, PNP, TO-3 MJ15004 Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2008. http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Page <3> 22/10/08 V1.1