SENSORS & CONTROLS 5903 Series INC. SPECTRUM 5/16 In. Dia. LINEAR MOTION PRECISION POTENTIOMETERS 1 In. ACTIVE STROKE STANDARD PRODUCT OFFERING SS&C PART NUMBER RESISTANCE STANDARD PRODUCTS ALSO AVAILABLE WITH .5 In., .75 In., 1.5 In. AND 2.0 In. STROKE LENGTHS 5903-0110-030 1K 10% 5903-0510-030 5K 10% 5903-1010-030 10K 10% .035 .01 TYP. OVERTRAVEL EACH END 1.00 NOMINAL ELECTRICAL STROKE 6.0 NOMINAL LEADWIRES 1.76 .01 .49 .01 .312 .002 .078.005 SHAFT DIA. .385 .025 #4-40 THREAD STANDARD MODEL ELECTRICAL CHARACTERISTICS RESISTANCE: ACTIVE ELECTRICAL STROKE: 1k TO 10k 10% 1.00 In. NOMINAL OTHER STROKE LENGTHS AVAILABLE AS NOTED ELECTRICAL CONTINUITY STROKE: OVER MECH. STROKE INDEPENDENT LINEARITY: 1.0% END VOLTAGE: 0.5% MAX. VOLTAGE RESOLUTION: VIRTUALLY INFINITE OUTPUT SMOOTHNESS: 0.1% MAX. RESISTANCE TEMP. COEFFICIENT: 500PPM/C MAX. POWER RATING @ 70C: 1.0 WATT MAX. WIPER CONTACT CURRENT: 10 MilliAmps MAX. DIELECTRIC STRENGTH: 1000 VRMS INSULATION RESISTANCE: 100 Meg MIN. SCHEMATIC DIAGRAM RED STANDARD MODEL MECHANICAL CHARACTERISTICS MECHANICAL STROKE: ACTUATING FORCE: SHAFT ROTATION: TOTAL WEIGHT (1-GANG): ALLOWABLE SHAFT PLAY: 1.070.020 0.75 Oz. MAX. CONTINUOUS (NO EFFECT) 0.75 Oz. MAX. .005 MAX. MISALIGNMENT STANDARD ENVIRONMENTAL CHARACTERISTICS OPERATING TEMP. RANGE: OPERATING LIFE: -65C To +125C 100 x 10 6STROKES MIN. STANDARD MATERIALS OF CONSTRUCTION HOUSING: SHAFT AND GUIDE RODS: RESISTANCE ELEMENT: ELECTRICAL CONTACTS: BEARINGS: LEADWIRES / JACKET: STAINLESS STEEL (TUBING) STAINLESS STEEL CO-MOLDED CONDUCTIVE PLASTIC MULTI-FINGER PRECIOUS METAL VECTRA E130i PLASTIC #30 AWG TYPE ET (TEFLON) SHRINK TUBING JACKET CONTACT: EXTEND SPECTRUM SENSORS & CONTROLS, INC. BLACK WHITE 424 CROWN POINT CIRCLE, GRASS VALLEY, CA 95945 (800) 880-7730 (530) 273-4608 FAX: (530) 273-0769 E-MAIL: sales@specsensors.com #4-40 THREADED STAINLESS STEEL SHAFT PLASTIC END CAP INC. SPECTRUM SENSORS & CONTROLS 5903 Series 5/16 In. Dia. LINEAR MOTION PRECISION POTENTIOMETERS STAINLESS STEEL GUIDE RODS CO-MOLDED CONDUCTIVE PLASTIC RESISTANCE ELEMENT PLASTIC CONTACT SLIDER PLASTIC END CAP WELDED MULTI-FINGER PRECIOUS METAL CONTACTS STANDARD ELECTRICAL CHARACTERISTICS RESISTANCES (10%): ACTIVE ELECTRICAL STROKE: ELECTRICAL CONTINUITY: INDEPENDENT LINEARITY: END VOLTAGE: VOLTAGE RESOLUTION: OUTPUT SMOOTHNESS: RESISTANCE TEMP. COEFFICIENT: POWER RATING @ 70C: WIPER CONTACT CURRENT: DIELECTRIC STRENGTH: INSULATION RESISTANCE: 1K, 2K, and 5k 0.5, 0.75, 1.0, 1.5, and 2.0 Inches THROUGHOUT MECH. STROKE 1.0% 0.5% MAX. VIRTUALLY INFINITE 0.1% MAX. 500PPM/C MAX. 1.0 WATT MAX. PER STROKE INCH 10 MilliAmps MAX. 1000 VRMS 100 Meg MIN. STANDARD MECHANICAL CHARACTERISTICS MECHANICAL STROKE: SHAFT ACTIVATION FORCE: MAX. SHAFT MISALIGNMENT: ACTIVE STROKE + 0.07 IN. 0.75 Oz. MAX. 0.005 In. PERMISSIBLE EPOXY SEALED WIRE HEADER PASSIVATED STAINLESS STEEL HOUSING #30 AWG COLOR CODED LEADWIRES SHRINK SLEEVE CABLE JACKET AVAILABLE OPTIONS CUSTOM RESISTANCE VALUES (500 TO 30k) AND TOLERANCES AS LOW AS 5% SPECIAL LINEARITIES AS LOW AS 0.2%, ABSOLUTE (INDEXED) OR INDEPENDENT OVER SPECIFIED REGIONS. SPECIAL ELECTRICAL STROKES (3.5 Inch MAX.) SPECIAL CABLE OR CONNECTORS SPECIAL SHAFT LENGTHS AND FEATURES SUCH AS FLATS, SLOTS, STEPS, YOKES, CLAMPS, AND ROD ENDS. SPECIAL ENVIRONMENTAL CAPABILITES SUCH AS MOISTURE SEALS, HIGH SHOCK AND VIBRATION CAPABILITIES. STANDARD ENVIRONMENTAL CHARACTERISTICS OPERATING TEMP. RANGE: ROTATIONAL OPERATING LIFE: -65C To +125C 6 100 x 10 STROKES MIN. STANDARD MATERIALS OF CONSTRUCTION HOUSING: SHAFT AND GUIDE RODS: RESISTANCE ELEMENT: ELECTRICAL CONTACTS: LEADWIRES / CABLE: STAINLESS STEEL STAINLESS STEEL CO-MOLDED CONDUCTIVE PLASTIC MULTI-FINGER PRECIOUS METAL #30 AWG TYPE ET (TEFLON) CONTACT: SPECTRUM SENSORS & CONTROLS, INC. 424 CROWN POINT CIRCLE, GRASS VALLEY, CA 95945 (800) 880-7730 (530) 273-4608 FAX: (530) 273-0769 E-MAIL: sales@specsensors.com