Ordering number:EN4175A SB10-09P Schottky Barrier Diode 90V, 1A Rectifier Applications Package Dimensions * High frequency rectification (switching regulators, converters, choppers). unit:mm 1244A [SB10-09P] Features * Low forward voltage (VF max=0.7V). * Fast reverse recovery time (trr max=20ns). * Low switching noise. * Low leakage current and high reliability due to highly reliable planar structure. 1:Anode 2:Cathode 3:No Contact SANYO:PCP Specifications Absolute Maximum Ratings at Ta = 25C Parameter Repetitive Peak Reverse Voltage Symbol Conditions Ratings Unit VRRM VRSM 90 V 95 V Average Output Current IO 1 A Surge Forward Current IFSM Junction Temperature Storage Temperature Nonrepetitive Peak Reverse Surge Voltage 50Hz sine wave, 1 cycle 5 A Tj -55 to +125 C Tstg -55 to +125 C Electrical Characteristics at Ta = 25C Parameter Reverse Voltage VR Forward Voltage VF IR Reverse Current Interterminal Capacitance C Reverse Recovery Time trr Thermal Resistance Conditons Symbol IR=1mA IF=1A typ max 90 VR=10V, f=1MHz IF=IR=100mA, See specifaied Test Circuit Mounted on 250mm2x0.8mm ceramic board Unit V VR=45V Rthj-a (1) Rthj-a (2) Ratings min 0.7 V 200 A 70 pF 20 ns 280 C/W 100 C/W Marking:SJ trr Test Circuit SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 43098HA (KT)/42894YH (KOTO) 8-7191 No.4175-1/2 SB10-09P No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: Not impose any responsibilty for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of April, 1998. Specifications and information herein are subject to change without notice. PS No.4175-2/2