3MTM Heavy Wall Heat Shrink Tubing ITCSN Data Sheet September 2013 Description 3MTM Heavy Wall Heat Shrink Tubing ITCSN is designed to provide reliable performance for electrical splices, connections, and terminations, as well as mechanical and weather resistant protection. This tubing is fabricated from crosslinked polyolefin. The tubing is highly split-resistant and fast-shrinking to provide rapid installation. It comes standard with a factory-applied adhesive/sealant. Agency Approvals & Self Certifications UL Listed, UL 486D Standard, File E102356 CSA Certification, File LR86335 Voltage Rating 600 V Direct burial and Submersible For use with Listed, Crimp-type, Splice Connectors All other product claims are made by 3M and not covered by the UL Listing Features Applications Fast and easy installation Thick wall top resists puncture and abrasion damage Rugged weather resistant protection Versatile, a minimum number of sizes cover the entire range of applications Shrink ratio as high as 4:1 Resists acids and alkalies Bonds to a wide variety of substrates Reliable and proven UV resistant Primary electrical insulation for solid dielectric wire and cable rated to 1000 volts For indoor, outdoor or overhead use Direct buried or submersible Insulating secondary splices Physical protection and moisture sealing of high voltage air insulated connectors and lugs, such as lug connections to bus bars Relocation of service Dig-in repairs Sheath repairs 1 of 4 3 3MTM Heavy Wall Heat Shrink Tubing ITCSN Standard Sizes and Dimensions Product Number Minimum Expanded/ Maximum Recovered I.D. Cable Range Size in. (mm) in. 2 (mm) Cable O.D. Use Range Maximum - Minimum in. Certification and Listings (mm) ITCSN-0400 12 - 6 AWG (4 - 10 mm ) 0.40 / 0.15" (10,2 / 3,8mm) 0.35 - 0.17" (9 - 3,3 mm) E102356 LR86335 ITCSN-0800 8 - 1/0 AWG (10 - 15 mm2) 0.80 / 0.20" (20,3 / 5,1 mm) 0.65 - 0.24" (18 - 5,6 mm) E102356 LR86335 2 ITCSN-1100 2 - 4/0 AWG (35 - 95 mm ) 1.10 / 0.37" (27,9 / 9,4 mm) 0.88 - 0.40" (24 - 9,4 mm) E102356 LR86335 ITCSN-1500 3/0 AWG - 400 kcmil (95 -185 mm2) 1.50 / 0.50" (38,1 / 12,7 mm) 1.19 - 0.60" (33 - 12,1 mm) E102356 LR86335 ITCSN-2000 250 - 750 kcmil (150 - 300 mm2) 2.00 / 0.65" (50,8 / 16,5 mm) 1.60 - 0.75" (44 - 19,0 mm) E102356 LR86335 ITCSN-3000 600 - 1250 kcmil (400 - 625 mm2) 3.00 / 1.00" (76,2 / 25,4 mm) 2.25 - 1.20" (63,5 - 25,4 mm) ITCSN-4500 1500 - 2500 kcmil (800 - 1000mm2) 4.50 / 1.50" (114,3 / 38,1 mm) 4.00 - 1.50" (101,6 - 38,1 mm) ITCSN-6000 2.1 - 4.8" (53 - 122 mm2) 6.00 / 1.80" (152,4 / 45,7 mm) 5.50 - 1.80" (139,7 - 45,7 mm) Typical Properties LR86335 Not for specifications. Values are typical, not to be considered minimum or maximum. Properties measured at room temperature 73F (23C) unless otherwise stated. Physical Property (Test Method) Color Ultimate Tensile Strength (ASTM D412) Ultimate Elongation Longitudinal Change Secant Modulus (2%) (ASTM D882A) Shore D Hardness (ASTM D-2240) Air-Oven Aging [7 days @ 175F (175C)] Tensile Strength Elongation Heat shock (outer wall only) 4 hrs @ 491F (255 C) Low Temperature Flexibility 4 hrs @ -67F (-55C) Specific Gravity (ASTM D792 A-1) Continuous Operating Temperature (less adhesive) Electrical Property Dielectric Strength (60 mils) (ASTM 149) Volume Resistivity (ASTM D257) Typical Value US units (metric) Black 2400 PSI (16 Mpa) 475% +1, -10% 14,000 PSI (98 Mpa) 42 2,680 psi (18 Mpa) 375% No dripping, flowing, cracking No cracking 1.28 -67F-230F (-55C-110C) Typical Value US units (metric) 500 V/mil 14 1 x 10 ohm/cm Corrosivity (Mil-I-23053/15) Fungus Resistance (ASTM G-21) Water Absorption (ASTM D-570 6.1) Typical Value US units (metric) Non-corrosive Non-nutrient 0.05% Fluid Resistance JR4 Skydrol 600 Solution Gasoline Hydraulic Fluid >1500 PSI @ V/mil @ 600 V/mil Chemical Property 2 of 4 3MTM Heavy Wall Heat Shrink Tubing ITCSN Product Selection Selecting 3MTM Heavy Wall Heat Shrink Tubing ITCSN is easy and straightforward. The largest tubing size that provides a tight fit when fully recovered will produce the maximum wall thickness. Final wall thickness is proportional to the degree of tubing recovery. Listed Catalogue Number ITCSN-0400 ITCSN-0800 ITCSN-1100 ITCSN-1500 ITCSN-2000 Wire Size 12 - 6 8 - 1/0 2 - 4/0 3/0 - 400 250 - 750 Specifications The heat shrink tubing must be chemically cross-linked, thermally stabilized polyolefin, capable of operation at cable emergency overload temperatures of 266F (130C). The tubing must have UL Listing (UL 486D, 600V) and be approved for the use and be CSA Certified. Supplied tubing lengths of 4 feet and less shall be adhesive lined. The minimum shrink temperature shall be 250F (121C). Engineering/ Architectural Specifications The tubing must be usable in both indoor and outdoor applications on cables rated up to 1000 volts. It is resistant to moisture, mild acids and alkalies, fuels, oils, ozone, or ultraviolet light. It is compatible with and adheres to most types of cable jackets, including rubber, plastic or lead. Performance Tests UL 486D - The 3M ITCSN tubing was subjected to the requirements of UL 486D and passed all tests. This tubing is UL Listed per UL 486D and CSA Certified. Installation Techniques A detailed instruction sheet regarding proper installation is included in each kit. A brief summary of the installation steps is outlined as follows: 1. Thoroughly clean and prepare cable 2. Slide 3M ITCSN tubing onto cable 3. Install connector, if applicable 4. Center tubing 5. Shrink tubing from center 6. Heat until tubing is completely shrunk and adhesive/sealant (if applicable) is squeezed from ends 3 of 4 3MTM Heavy Wall Heat Shrink Tubing ITCSN Shelf Life & Storage 3MTM Heavy Wall Heat Shrink Tubing ITCSN has a 10-year shelf life from date of manufacture when stored in a humidity controlled storage (10C/50F to 27C/80F and <75% relative humidity). Availability Please contact your local distributor, available from 3M.com/oem [Where to Buy] or call 1.800.676.8381 3M is a trademark of 3M Company. Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product, which are not contained in 3M's current publications, or any contrary statements contained on your purchase order, shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability This product will be free from defects in material and manufacture at the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Electrical Markets Division 6801 River Place Blvd. Austin, TX 78726-9000 800 676.8381 FAX: 800.828.9329 www.3M.com/oem Please recycle (c) 3M 2013 All rights reserved 78-8126-0422-7 E 4 of 4