0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC FH41 Series THine Electronics, Inc. Next-generation chipset (V-by-One(R)HS*) Compatible connector =^\]"heZZYhZg^Va^ciZg[VXZiZX]cdad\n [dg^bV\ZigVchb^hh^dc Space saving (68 pos. shown) '#*bb (-bb Features 1.Compatibility with impedance control, shield FFC The FH41 series is equipped with a GND exclusive terminal and available for connection with impedance control, shield FFC. 2.Differential impedance 10010% +#'bb figure.1 The FH41 series features a terminal design considering impedance control, and making high speed transmission possible. Sig 0.5 nal co mm nta pitc ct h 3.Highly reliable connection, tough structure The FH41 series follows the structure of the proven FH28 series, and achieves: - High reliability thanks to the FFC positioning mechanism - Reliable connection operation and no unlocking thanks to the durable structure. 4.One-finger operation of the actuator Proven (in several other Hirose's connectors!) Flip-Lock rotating actuator assures reliable mechanical and electrical connection with FPC, confirming it with a definite tactile feel. figure.2 Gro 2.5 und mm con pitc tact h 5.Board placement with automatic equipment Flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. Standard reel packaging contains 2,500 connectors. H^\cVa XdciVXi XdccZXi^dcVgZV 6.Halogen-free * *As defined by IEC61249-2-21 Br-900ppm maximum, Cl-900ppm maximum, Cl + Br combined-1,500ppm maximum FFC figure.3 <C9XdciVXiXdccZXi^dcVgZV 2010.9 1 FH41 Series0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC Specifications Current rating 0.5 A(Note1) Voltage rating 50 Vrms AC Ratings Recommended FPC Thickness Operating temperature range: -40 to +85C (Note 2) Operating humidity range: Relative humidity 90% max. (No condensation) Storage temperature range: -10 to +50C (Note 3) Storage humidity range: Relative humidity 90% max. (No condensation) 0.3 0.05 mm, Gold plated contact pads (GND plate:t=0.50.05mm,tinplateing) Item Specification Conditions 1.Insulation resistance 500 Mo min. 100 V DC 2.Withstanding voltage No flashover or insulation breakdown 150 Vrms AC / one minute 3.Contact resistance 100 mo max. * Including FFC conductor resistance 1 mA, AC max (AC: 1kHz) 4.Durability Contact resistance: 100 mo max. No damage, cracks, or parts dislocation 20 cycles 5.Vibration No electrical discontinuity of 1s or longer Contact resistance: 100 mo max. No damage, cracks, or parts dislocation Frequency: 10 to 55 Hz, single amplitude of 0.75mm, 10 cycles in each of the 3 directions 6.Shock No electrical discontinuity of 1s or longer Contact resistance: 100 mo max. No damage, cracks, or parts dislocation Acceleration of 981m/s 6 ms duration, sine halfwave, 3 cycles in each of the 3 axis 7.Humidity (Steady state) Contact resistance: 100 mo max. Insulation resistance: 50 Mo min. No damage, cracks, or parts dislocation 96 hours at 40C and humidity of 90 to 95% 8.Temperature cycle Contact resistance: 100 mo max. Insulation resistance: 50 Mo min. No damage, cracks, or parts dislocation Temperature : -40C +15C to +35C +85C +15C to +35C Time: 30 2 to 3 30 2 to 3 minutes 5 cycles 9.Resistance to soldering heat No deformation of components affecting performance Reflow: At the recommended temperature profile Manual soldering: 350C 5C for 5 seconds 2 Note 1. When passing the current through all of the contacts, use 70% of the rated current. Note 2. Includes temperature rise caused by current flow. Note 3. The term "storage" refers to products stored for a long period prior to mounting and use. The operating temperature and humidity range covers the non-conducting condition of installed connectors in storage, shipment or during transportation after board mounting. Note 4. Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Materials Part Material Insulator LCP Contacts Phosphor bronze Metal fittings Brass Finish Remarks Color:Gray UL94V-0 Color:Black Gold plated --------- Pure tin reflow plated Ordering information FH 41 - 50S - 0.5 SH (05) Series name : FH Series No.: 41 Number of positions : 28 to 68 Contact pitch : 0.5mm 2 SH : SMT horizontal mounting type Plating specifications :(05)...Gold plated FH41 Series0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC Connector Dimensions 8 9 *#%* & *#)* %#&' Cd#d[XdciVXih 8Vk^inCd# '#* %#&' ' '#* )#, : %#'* %#- %#&* (9^bZch^dc[dg;;8deZc^c\ +#' < Note 1. The coplanarity of each terminal lead within specified dimension is 0.1 mm Max. 2. Packaged on tape and reel only. Check packaging specification. 3. Slight variations in color of the plastic compounds do not affect form, fit or function of the connector. 4. After reflow, the terminal plating may change color, however this does not represent a quality issue. Unit : mm Part Number CL No. FH41-28S-0.5SH(05) 580-2208-1-05 28 FH41-40S-0.5SH(05) 580-2205-3-05 40 FH41-50S-0.5SH(05) 580-2204-0-05 50 10 580-2202-5-05 68 13 FH41-68S-0.5SH(05) Number of contacts No. of Contacts(GND contacts) C D E F G 5 18 8 24 13.5 10 14.57 15.95 19.5 17.5 20.57 21.95 29 24.5 22.5 25.57 26.95 38 33.5 30 34.57 35.95 Note1.Tape and reel packaging (2,500 pieces/reel). Order by number of reels. 3 FH41 Series0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC Recommended PCB mounting pattern and metal mask dimensions %#(%#%(AVcYeViiZgc %#'*%#%(Metal mask %#*%#%* &%#%* &#'%#%*AVcYeViiZgc &%#%*Metal mask &#**%#%* +#+%#& +#(*%#%* %#+*%#%* 9%#%* %#(%#%(AVcYeViiZgc %#'%#%Metal mask '#*%#%* %#)%#%( :%#%* =%#%* GZXdbbZcYZYbZiVabVhi]^XcZhhi2%#& Recommended FFC Dimensions %#*%#& *#*B>C '#,%#* #' %#*%#%* %#(%#%* %#&B>C *#*B>C &,#,B6M G% %#*%#%* %#(%#%( &#.%#& '#+%#& (#-%#& '" '#'%#* %#' '"G ?%#& @%#%, 9%#%* %#'b Vm & H]^ZaYVgZV '"G '"G %#' bV m <gdjcYeaViZ CdiZ 1 EaZVhZdkZgaVeh]^ZaYeaViZdc\gdjcYeaViZ# Unit : mm Part Number CL No. FH41-28S-0.5SH(05) 580-2208-1-05 Number of contacts No. of Contacts(GND contacts) 28 FH41-40S-0.5SH(05) 580-2205-3-05 FH41-50S-0.5SH(05) 580-2204-0-05 FH41-68S-0.5SH(05) 580-2202-5-05 Note1.Tape and reel packaging (2,500 pieces/reel). Order by number of reels. 4 H J K 5 16 15.7 14.5 40 8 22 21.7 20.5 50 10 27 26.7 25.5 68 13 36 35.7 34.5 FH41 Series0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC Recommended FFC construction Material Name Material thickness(m) thickness(m) Shielding Material Conouctiye Adhesive Polyester Type Copper Film (Tin Plated) 1 Adhesive Acrylic Type 24 1 Base Material Polyester Type 12 1 Adhesive Acrylic Type 24 1 Insulated Layer Polyester Type Adhesive Polyester Type Soft Copper Film (Nickel Under Plated / Gold Plated) 35 35 Adhesive Polyester Type 35 35 Insulated Layer Polyester Type 25 25 Adhesive Polyester Type 30 30 Siiffener Polyester Type 188 188 503 313 Total Note 1 70 Please overlap shield plate on ground plate. 5 FH41 Series0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC Packaging Specification Embossed Carrier Tape Dimensions &#,*%#& C%#& B%#& A%#( % % #& && )%#& '%#& &'%#& E F G A%#( C%#& '#. %#( #* &#,*%#& #* && )%#& '%#& &'%#& E F G '#. %#( IVeZl^Yi]d[('bbb^c# % % #& IVeZl^Yi]d[')bbbVm# &#+)/KVXjbe^XjeVgZV *#,* ,#(* &#+)/KVXjbe^XjeVgZV *#,* ,#(* 9^gZXi^dcd[jcgZZa^c\ 9^gZXi^dcd[jcgZZa^c\ & ( Reel Dimensions -% (-% H/Djih^YZ I/>ch^YZ IgV^aZg Edgi^dcZfj^eeZYl^i]XdccZXidgh AZVYZg)%%bbb^c :bWdhhZYXVgg^ZgiVeZ &):beinXdbedcZciXdbeVgibZcihb^c IdeXdkZgiVeZ &%:beinXdbedcZciXdbeVgibZcihb^c Unit : mm 6 Part Number CL No. FH41-28S-0.5SH(05) 580-2208-1-05 Number of contacts No. of Contacts(GND contacts) 28 FH41-40S-0.5SH(05) 580-2205-3-05 40 8 44 40.4 20.2 24.3 23 21.7 49.4 45.4 FH41-50S-0.5SH(05) 580-2204-0-05 50 10 44 40.4 20.2 29.3 28 26.7 49.4 45.4 FH41-68S-0.5SH(05) 580-2202-5-05 68 13 56 52.4 26.2 38.3 37 35.7 61.4 57.4 5 L 32 M N P 28.4 14.2 18.3 Q 17 R S T 15.7 37.4 33.4 FH41 Series0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC Temperature Profile MAX 250 IZbeZgVijgZ 250 230 200 HRS test condition Solder method Environment Solder composition 200 150 Test board Land dimensions Metal mask 150 :Reflow, IR/hot air :Room air :Paste, 96.5%Sn/3.0%Ag/0.5%Cu (Senju Metal Industry, Co., Ltd.'s Part Number:M705-221CM5-32-10.5) :Glass epoxy 30mmx60mmx0.8mm thick :0.3mmx0.65mm, 0.3mmx1.2mm :0.25x0.65, 0.2x0.1mm thick The temperature profiles shown are based on the above conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume / thickness and board size / thickness. Consult your solder paste and equipment manufacturer for specific recommendations. 100 50 25 +%hZX# 0 .%s&'%hZX# EgZ]ZVi^c\ +%hZX# hdaYZg^c\ HiVgi I^bZHZXdcYh 7 FH41 Series0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC Operation and Precautions Operation 1.FFC insertion procedure. Connector installed on the board. Precautions Do not force the actuator to open beyond its fully open position. Do not use any type of tool to open the actuator. Lift up the actuator. Use thumb or index finger 110 Fully insert the FFC in the connector parallel to mounting surface, with the exposed conductive traces facing down. Do not forcefully bend the FFC upward. Consult FFC manufacturer for the recommended bend radiuses. Rotate down the actuator until firmly closed. It is critical that the inserted FFC is not moved and remains fully inserted. For connectors with multiple contacts, such as 80 pos. rotate down the actuator pushing at both ends. 2.FFC removal Load to FFC Be very careful not to apply any force to the connector directly after inserting FFC. Otherwise, the connector may become unlocked or the FFC may break. In particular, design the FFC layout with care not to bend it sharply upward in a vertial direction near the insertion opening. Fix the FFC when loads are applied to it continuously. Fully open the actuator. Carefully withdraw the FFC exercising caution not to deform or damage it. 8 FH41 Series0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC Precautions (mating/un-mating FFC with the retention tabs) Precautions Operation 1.How to insert Insert the cable into the interspace between the mold walls ) at both ends of entrance where the connector is ( inserted and the guide walls ( ) at both ends of interior connector so the cable tabs are properly located. Avoid "ride on" Avoid insertion so the cables ride on any guide. Be sure NOT to close the actuator as the cables ride on any guide. It may cause conduction failure. Ride on a left guide Ride on a right guide Correct insertion 2.Precautions when mating /un-mating Avoid insertion in diagonal direction. Do not insert the cable in diagonal direction. A part of the connector may touches the contacts resulting in deformation of the contacts. Do not close the actuator as the cables ride on. Insert the cable straight into the connector and hook the cable tabs with the guide. After insertion, slightly pull the cables to make sure the cable tabs are firmly secured. No removal of the cable means correct insertion. Insert the cable straight and obliquely from above. In the event it is locked as the cables ride on a guide, absolutely avoid moving the cable. In this case, open the actuator and re-insert the cable as instructed in " 1.How to insert" Do not move the cables back and forth and around as the cables ride on the guide when the actuator is closed. Slightly pull the cable to make sure the tabs are firmly secured. Close the actuator. 9 FH41 Series0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC NOTES : 10 FH41 Series0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC NOTES : 11 FH41 Series0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC USA: HIROSE ELECTRIC (U.S.A.), INC. Headquarters 2688 Westhills Court, Simi Valley, CA 93065-6235 Phone : 1-805-522-7958 Fax : 1-805-522-3217 http://www.hiroseusa.com USA: HIROSE ELECTRIC (U.S.A.), INC. North California Office 20400 Stevens Creek Blvd., Ste 250, Cupertino, CA 95014 Phone : 1-408-253-9640 Fax : 1-408-253-9641 http://www.hiroseusa.com USA: HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive) 37677 Professional Center Drive, Suite #100C Livonia, MI 48154 Phone : 1-734-542-9963 Fax : 1-734-542-9964 http://www.hiroseusa.com GERMANY: HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH Herzog-Carl-Strasse 4 D-73760 Ostfildern (Scharnhauser Park) Phone : 49-711-4560-02-1 Fax : 49-711-4560-02-299 http://www.hirose.de THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Hogehillweg #8 1101 CC Amsterdam Z-O Phone : 31-20-6557460 Fax : 31-20-6557469 http://www.hiroseeurope.com UK: HIROSE ELECTRIC EUROPE B.V. UK BRANCH First Floor, St Andrews House, Caldecotte Lake Business Park, Milton Keynes MK7 8LE Phone : 44-1908-369060 Fax : 44-1908-369078 http://www.hirose.co.uk CHINA: HIROSE ELECTRIC CO., LTD. BEIJING REPRESENTATIVE OFFICE A1001, Ocean International Center, Building 56# East 4th Ring Middle Road, Chao Yang District, Beijing, 100025 Phone : 86-10-5165-9332 Fax : 86-10-5908-1381 http://www.hirose-china.com.cn CHINA: HIROSE ELECTRIC (SHANGHAI) CO., LTD. 1501-02, Cross Tower Building, 318 Fuzhou Road, Huang Pu District, Shanghai 200001 Phone : 86-21-6391-3355 Fax : 86-21-6335-0767 http://www.hirose-china.com.cn CHINA: HIROSE ELECTRIC CO., LTD. SHENZHEN OFFICE Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre 5002, ShenNanDong Road, ShenZhen City, Guangdong Province, 518008 Phone : 86-755-8207-0851 Fax : 86-755-8207-0873 http://www.hirose-china.com.cn HONG KONG: HIROSE ELECTRIC HONGKONG TRADING CO., LTD. Unit 1102 A&B, Energy Plaza, 92 Granville Road, Tsim Sha Tsui East, Kowloon Phone : 852-2803-5338 Fax : 852-2591-6560 http://www.hirose-hongkong.com.hk TAIWAN: SINGAPORE: HIROSE ELECTRIC CO., LTD. 10 Anson Road #26-16 International Plaza 079903 Phone : 65-6324-6113 Fax : 65-6324-6123 http://www.hirose-singapore.com.sg HIROSE ELECTRIC TAIWAN CO., LTD. 103 8F, No.87, Zhengzhou Rd., Taipei Phone : 886-2-2555-7377 Fax : 886-2-2555-7350 http://www.hirose-taiwan.com.tw KOREA: HIROSE KOREA CO., LTD. 1261-10, Jeoungwhang-Dong, Shihung-City, Kyunggi-Do 429-450 Phone : 82-31-496-7000,7124 Fax : 82-31-496-7100 http://www.hirose.co.kr (R) 12 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-5300, FAX: 81-3-3495-5230 http://www.hirose.com http://www.hirose-connectors.com The contents of this catalog are current as of date of 09/2010. Contents are subject to change without notice for the purpose of improvements. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Hirose Electric: FH41-28S-0.5SH(05) FH41-40S-0.5SH(05) FH41-50S-0.5SH(05) FH41-68S-0.5SH(05) FH41-30S-0.5SH(05) FH41-31S-0.5SH(05) FH41-40S-0.5SH FH41-50S-0.5SH FH41-15S-0.5SH(05) FH41-50S-0.5SH(28) FH41-40S0.5SH(99) FH41-30S-0.5SH(99) FH41-31S-0.5SH(99) FH41-28S-0.5SH(99) FH41-50S-0.5SH(99) FH41-68S0.5SH(99)