COPY & PASTE A CDE PART NUMBER TO CHECK STOCK ONLINE: Type SCR Commutating Capacitors Type SCRN Film-Paper/Extended Foil Commutating Capacitor Type SCRN capacitors are for SCR (silicon controlled rectifier) commutating applications that require high peak and rms current capability. These capacitors are ideal for other high frequency and pulsed applications. The SCRN is supplied in oval or rectangular metal cases with 1/4 x 20 threaded stud and insulated terminals to withstand high current and high peak voltages. Highlights * * * * Specifications Complies with the EU Directive 2002/95/EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)), PolyBrominated Biphenyls (PBB) and PolyBrominated Diphenyl Ethers (PBDE). Ratings Cap Catalog Case H Max VA Max (F) Part Number Code (In.) (65 C) (Arms) 200 Vpk (Paper Dielectric) 3 SCRN201R-F A 2.13 400 60 5 SCRN202R-F A 2.63 465 60 10 SCRN203R-F A 3.88 625 60 15 SCRN205R-F A 4.75 765 60 20 SCRN206R-F B 4.25 875 60 30 SCRN208R-F C 5.25 1200 60 40 SCRN209R-F C 6.75 1500 60 50 SCRN210R-F D 5.75 1590 60 400 Vpk (Film and Paper Dielectric) 2 SCRN211R-F A 2.63 790 60 3 SCRN212R-F A 2.63 970 60 5 SCRN213R-F A 3.88 1130 60 10 SCRN214R-F B 4.75 1930 60 15 SCRN215R-F C 4.75 2240 60 20 SCRN216R-F C 6.25 2800 60 30 SCRN217R-F D 6.75 3720 60 40 SCRN218R-F D 8.00 4330 60 50 SCRN219R-F E 6.25 6050 100 600 Vpk (Film and Paper Dielectric) 2 SCRN220R-F A 2.63 815 60 3 SCRN221R-F A 3.13 1200 60 5 SCRN222R-F A 4.25 1420 60 10 SCRN224R-F C 4.25 2040 60 15 SCRN226R-F C 5.75 2800 60 20 SCRN227R-F D 5.75 3260 60 25 SCRN229R-F D 6.75 3720 60 30 SCRN230R-F D 8.00 4330 60 40 SCRN231R-F E 6.25 6060 100 50 SCRN232R-F E 7.25 6850 100 Conforms to EIA RS401 for power semiconductor applications Non ferrous covers available for high frequency applications 40,000 hours life at full rated voltage and temperature High voltage, high current and high frequency Capacitance Range: Voltage Range: Capacitance Tolerance: Temperature Range: Surface Temperature: 0.25 F to 50.0 F 200 Vpk to 2000 Vpk 10% -40 C to +65 C +80 C Cap Catalog Case H Max VA Max (F) Part Number Code (In.) (65 C) (Arms) 600 Vpk (Film Dielectric for Low-loss) 1 SCRN262R-F A 2.38 2200 60 2 SCRN263R-F A 2.38 2060 60 3 SCRN264R-F A 3.88 3190 60 5 SCRN265R-F A 4.25 4380 60 10 SCRN266R-F C 4.25 6060 60 1000 Vpk (Film and Paper Dielectric) 1 SCRN233R-F A 2.13 790 60 2 SCRN234R-F A 3.13 1070 60 3 SCRN235R-F A 3.88 1455 60 5 SCRN236R-F B 4.25 1785 60 10 SCRN237R-F C 5.75 2570 60 15 SCRN238R-F D 5.75 3170 60 20 SCRN239R-F E 5.13 5200 100 1500 Vpk (Film and Paper Dielectric) .5 SCRN240R-F A 2.13 990 60 1 SCRN241R-F A 2.88 1240 60 2 SCRN242R-F B 3.50 1890 60 3 SCRN243R-F C 4.25 2550 60 5 SCRN244R-F C 5.75 3250 60 10 SCRN245R-F E 5.13 6500 100 2000 Vpk (Film and Paper Dielectric) .25 SCRN246R-F A 2.13 990 60 .33 SCRN257R-F A 2.13 1000 60 .5 SCRN247R-F A 2.63 1180 60 1 SCRN248R-F A 3.13 1300 60 2 SCRN249R-F B 4.25 2230 60 3 SCRN251R-F C 4.75 2800 60 5 SCRN253R-F D 5.75 4020 60 10 SCRN256R-F F 5.75 7600 100 CDE Cornell Dubilier * 1605 E. Rodney French Blvd. * New Bedford, MA 02744 * Phone: (508)996-8561 * Fax: (508)996-3830 * www.cde.com GO COPY & PASTE A CDE PART NUMBER TO CHECK STOCK ONLINE: GO Type SCR Commutating Capacitors Outline Drawings RoHS Compliant B .03" B .03" A .03" A .03" F .03" 1/4 - 20 THD 2 Plcs) D .06" F .03" D .06" C .06" 1/4 - 20 THD 2 Plcs) C .06" H .06" H .06" Figure 2 Figure 1 Case Dimensions Inches Code A B C D F H Figure A 1.31 2.16 0.56 1.19 0.81 see table Fig. 1 B 1.56 2.69 0.50 1.13 1.25 see table Fig. 1 C 1.91 2.91 0.50 1.13 1.38 see table Fig. 1 D 1.97 3.66 0.50 1.13 1.38 see table Fig. 1 E 2.84 4.56 0.50 1.13 2.00 see table Fig. 2 F 3.75 4.56 0.56 1.19 2.00 see table Fig. 2 Mounting Hardware See catalog page 5.000 for hardware CDE Cornell Dubilier * 1605 E. Rodney French Blvd. * New Bedford, MA 02744 * Phone: (508)996-8561 * Fax: (508)996-3830 * www.cde.com COPY & PASTE A CDE PART NUMBER TO CHECK STOCK ONLINE: GO Type SCR Commutating Capacitors How to Choose a Commutating Capacitor 1. From circuit analysis or measurement, determine application values for these six parameters: Nominal capacitance in F Current pulse width in s Current pulse period in s Maximum peak voltage Continuous AC voltage in Vrms Maximum volt-amps (VA) 2. Choose a capacitor from the ratings table of the desired nominal capacitance with a peak voltage rating no less than your maximum peak voltage. 3. Check that your application's rms current is no more than the capacitor's Max. Amps RMS. You can calculate Using Volt-Ampere Ratings the current from your Vrms using the equations in the following section. 4. Check that your application's volt-amperes is not more than the capacitor's VA capability. The VA capability is the max VA rating times the Volt-Ampere multiplier from Figure 2 (Current Pulse Width) and that times the Volt-Ampere Multiplier from Figure 3 (Ambient Temperature). See the following section for more on using volt-ampere multipliers . If you need a greater VA capability, repeat these steps for a higher peak voltage capacitor or consider connecting units in parallel to divide the VA required. For up to peak voltage of 600 V, you may also consider polypropylene film dielectric units, Catalog Numbers SCRN262R through SCRN266R, with higher VA capability. Pulse Wave Applications The capacitors maximum VA rating is the maximum product of the sine wave voltage and current that may be applied at 65 C without overheating the capacitor and reducing its expected life. For other temperatures and pulsed current, use the multipliers of Figures 2 and 3 to derate the Max VA rating. V peak The Max Amps RMS rating is set by the capability of the capacitor terminals. Exceeding this limit can damage the terminals and cause capacitor failure. Calculate the capacitor's actual VA load as the product of the rms voltage across the capacitor and the rms current through the capacitor. To calculate rms current for an applied sine wave or squarewave voltage, use these equations. Voltage V Current I peak Figure 1 Polypropylene Paper For a sinewave voltage the current is: Irms = 2 fCVrmsX10 PP Film/Paper -6 and for a squarewave the current is: Irms = CV/[0.64(tT)0.5] = Ipeak(t/T)0.5 Figure 2 where (f) is repetition frequency in Hz, C is nominal capacitance in F, V the peak-to-peak squarewave amplitude in volts, (t) is the pulse width in s and T is the pulse period in s. The peak current for the square wave voltage is: Ipeak = CV/0.64t Figure 3 CDE Cornell Dubilier * 1605 E. Rodney French Blvd. * New Bedford, MA 02744 * Phone: (508)996-8561 * Fax: (508)996-3830 * www.cde.com