\\glenair\DFS\S-DRIVE\PART\S8\80\801-0011OF3.PRT
1 of 1
THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO
BE DISCLOSED, REPRODUCED IN WHOLE OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED
FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN PERMISSION FROM GLENAIR, INC. THE INFORMATION
HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND INCORPORATION
INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.
KNURLS OR RIDGES
MFR'S OPTION
G
REVISED PER DCN 33987
JOH
11/2/09
TORQUE SPECIFICATIONS
45
50
50
55
60
85
90
5
6
7
9
13
16
17
MAX COUPLING
TORQUE, IN-LB
SHELL
SIZE
06/14/06
CI
REVISED PER DCN 25891
F
2/5/04
JOH
REVISED PER DCN 21959
D
9 POLARIZATIONS N,X,Y AND Z ARE
INACTIVE FOR NEW DESIGN
B
REVISED PER DCN 21537
GSB
10/22/03
1731
ZINC-NICKEL/O. D. OVER
ELECTROLESS NICKEL
FINISH DESCRIPTION
TABLE I
CLASS
C
M
NF
ZN
Z1
BLACK ANODIZE FINISH
ELECTROLESS NICKEL
OLIVE DRAB CADMIUM OVER
ELECTROLESS NICKEL FINISH
PASSIVATE
SHELL
MATERIAL
ALUMINUM
STAINLESS
STEEL
B THREAD
1.000 MAX
ø C ø A
MASTER KEY
1
4
8
13
17
19
16
12
7
3
CONNECTOR PLUG,QUICK COUPLING THREADS,
HIGH DENSITY, CRIMP REAR RELEASE
#23 CONTACTS, BANDING TERMINATION
SHELL SIZE 5 THRU 17
7 INSERT ARRANGEMENT SHOWN IS FOR REFERENCE ONLY, SEE TABLE II.
6. CRIMP TOOL DATA:
a) CRIMP FRAME: GLENAIR P/N 809-015 (M22520/2-01)
b) POSITIONER FOR USE WITH CRIMP FRAME: GLENAIR PART NO. 809-005.
c) INSERTION TOOL: GLENAIR PART NO. 809-013 (METAL TWEEZERS TYPE TOOL).
d) EXTRACTION TOOL: GLENAIR PART NO. 809-007 (METAL TWEEZERS TYPE TOOL).
GLENAIR PART NO. 809-019 (PLASTIC TOOL WITH HANDLE)
5. CRIMP BARREL ACCOMMODATES 22, 24, 26 AND 28 GAGE WIRE.
4. FOR ADDITIONAL INSERT ARRANGEMENTS CONSULT FACTORY.
01/15/03
01/15/03
3. THE CONTACTS ARE SIZE 23 CRIMP TYPE, AND ARE USED IN A
REAR RELEASE RETENTION SYSTEM.
1. ASSEMBLY TO BE IDENTIFIED WITH GLENAIR'S NAME PART NUMBER
AND DATE CODE SPACE PERMITTING.
NOTES: UNLESS OTHERWISE SPECIFIED
1 OF 3
GSB
G
RELEASED
A
APPROVED
801-001
01/15/03
GSB
DR
-
+
RELEASE DATE
NON REPARABLE COMMERCIAL ITEM
CAD 2000
N/A N/A
C
1211 AIR WAY - GLENDALE - CALIFORNIA 91201
1
-
+
.015.XXX
.030.XX -
+
1/16
-
+
ANGLES
DECIMALS
FRACTIONS
TOLERANCES:
DIMENSIONS ARE IN INCHES
UNLESS OTHERWISE SPECIFIED
DO NOT SCALE THIS DRAWING
B/F P/C
ENGR
CHECK
DRAWN
C
06324
APPROVED
RELEASE DATE
ORIGINAL
SIZE
CODE IDENT. NO.
SCALE WEIGHT SHEET
REV.
801-001
REVISIONS
APPROVEDDATEDESCRIPTION
SYM.
FACE VIEW OF PLUG
AS VIEWED FROM ENGAGING END.
(SIZE 9 SHOWN)
2. MATERIAL / FINISH:
PLUG, BARREL, COUPLING NUT-AL ALLOY OR CRES/SEE TABLE I
INSULATOR-LCP OR EPOXY/N.A.
INTERFACIAL SEAL, GROMMET SEAL- FLUOROSILICONE/N.A.
CONTACT- COPPER ALLOY / GOLD PLATE PER ASTM B 488, TYPE 3,
CLASS 1.25 (.00005 MIN THK), OVER A SUITABLE UNDERPLATE.
APPROVED
APPROVED
7
1
8. THIS CONNECTOR MATES WITH ALL QUICK COUPLING
HIGH DENSITY RECEPTACLES CONNECTORS WITH SAME
POLARIZATION AND OPPOSITE CONTACT GENDER,
(801-003 THROUGH 801-006 AND 801-009 THROUGH 801-012)
GSB 01/15/03
E
REVISED PER DCN 23261
JLT
12/22/04
\\glenair\DFS\S-DRIVE\PART\S8\80\801-0012OF3.PRT
1 of 1
THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO
BE DISCLOSED, REPRODUCED IN WHOLE OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED
FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN PERMISSION FROM GLENAIR, INC. THE INFORMATION
HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND INCORPORATION
INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.
1205
.500
.650
.805
.850
.290
ø C
PART NUMBER DEVELOPMENT
EXAMPLE:
43
2
1
1
5
12
20
29
39
48
67
75
82
85
81
74
66
57
47
38
28
19
11
4
1
4
10
17
25
32
40
47
53
55
52
46
39
24
16
9
3
PIN FACE SHOWN
(SOCKET FACE OPPOSITE)
PIN FACE SHOWN
(SOCKET FACE OPPOSITE)
58
ARRANGEMENT NO. 16-55
ARRANGEMENT NO. 17-85
1
5
10
16
23
29
34
37
33
28
22
15
94
3
4
8
13
17
19
16
12
71
PIN FACE SHOWN
(SOCKET FACE OPPOSITE)
PIN FACE SHOWN
(SOCKET FACE OPPOSITE)
ARRANGEMENT NO. 9-19 ARRANGEMENT NO. 13-37
.5625-.05P-.1L-2B
17
16
13
9
SHELL
SIZE
01/15/03
2 OF 3
CONNECTOR PLUG, QUICK COUPLING THREAD
HIGH DENSITY, CRIMP REAR RELEASE,
#23 CONTACTS BANDING TERMINATION
SHELL SIZE 5 THRU 17
G
SEE SHEET 1
APPROVED
801-001
01/15/03
GSB
DR
-
+
RELEASE DATE
NON REPARABLE COMMERCIAL ITEM
CAD 2000
N/A N/A
C
1211 AIR WAY - GLENDALE - CALIFORNIA 91201
1
-
+
.015.XXX
.030.XX -
+
1/16
-
+
ANGLES
DECIMALS
FRACTIONS
TOLERANCES:
DIMENSIONS ARE IN INCHES
UNLESS OTHERWISE SPECIFIED
DO NOT SCALE THIS DRAWING
B/F P/C
ENGR
CHECK
DRAWN
C
06324
APPROVED
RELEASE DATE
ORIGINAL
SIZE
CODE IDENT. NO.
SCALE WEIGHT SHEET
REV.
801-001
REVISIONS
APPROVEDDATEDESCRIPTION
SYM.
B THREAD
TABLE II TABLE III
DIMENSIONS INSERT ARRANGEMENT
.8125-.1P-.2L-2B
1.000-.1P-.2L-2B
1.062-.1P-.2L-2B
ARR NO. CONTACT
SIZE
CONTACT
QTY
9-19 23 19
13-37 23 37
16-55 23 55
17-85 23 85
6-7 23 7
6-4 23 4
6.3750-.05P-.1L-2B
801-001 - 16 M 6-7 P A
CONNECTOR SERIES
SHELL STYLE
16 = PLUG, WITH ANTI-DECOUPLING SPRING
CLASS
(SEE TABLE I)
INSERT ARRANGEMENT NO.
( SEE TABLE III)
CONTACT STYLE
P= PIN
S= SOCKET
KEY POSITION
A,B,C,D (SEE TABLE IV AND 9 )
12
3
4
5
67
ARRANGEMENT NO. 6-4
PIN FACE SHOWN
(SOCKET FACE OPPOSITE)
ARRANGEMENT NO. 6-7
PIN FACE SHOWN
(SOCKET FACE OPPOSITE)
.60
1.30
1.24
1.05
.81
ø A
PIN FACE SHOWN
(SOCKET FACE OPPOSITE)
ARRANGEMENT NO. 7-10
74
10 8
1
3
PIN FACE SHOWN
(SOCKET FACE OPPOSITE)
ARRANGEMENT NO. 5-3
C
B
A
.54 3235-35.3125-.05P-.1L-2B .245
.68 1023
7-10
7 .4375-.05P-.1L-2B .390
\\glenair\DFS\S-DRIVE\PART\S8\80\801-0013OF3.PRT
1 of 1
THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO
BE DISCLOSED, REPRODUCED IN WHOLE OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED
FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN PERMISSION FROM GLENAIR, INC. THE INFORMATION
HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND INCORPORATION
INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.
9
A°
B°
SYM. DESCRIPTION DATE APPROVED
REVISIONS
801-001
REV
SHEETWEIGHTSCALE
CODE IDENT. NO. SIZE
ORIGINAL
RELEASE DATE
APPROVED
06324
C
DRAWN
CHECK
ENGR
P/CB/F
DO NOT SCALE THIS DRAWING
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONS
DECIMALS
ANGLES
+
-1/16
+
-
.XX .030
.XXX .015
+
-1
1211 AIR WAY - GLENDALE - CALIFORNIA 91201
C
N/AN/A
CAD 2000
NON REPARABLE COMMERCIAL ITEM
RELEASE DATE
+
-
DR
GSB
01/15/03
801-001
APPROVED
SEE SHEET 1
G
3 OF 3
01/15/03
CONNECTOR PLUG,QUICK COUPLING THREADS
HIGH DENSITY, CRIMP REAR RELEASE
#23 CONTACTS BANDING TERMINATION
SHELL SIZE 5 THRU 17
D 275°140°
C 230° 95°
B 210° 75°
A 210°150°
B°A°
POSITION
ALTERNATE KEY AND
KEYWAY POSITION
TABLE IV
ALTERNATE POSITION
KEY ROTATION 9
X°
Y°
Z°
NORMAL
ALTERNATE KEY POSITION
170° 160° 150°
X° Y° Z°
NORMAL
180°