MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 oC ambient temperature unless otherwise specified.
resistive or inductive load.
2RS101M
THRU
2RS107M
MAXIMUM RATINGS
(@ TA=25
OC unless otherwise noted)
ELECTRICAL CHARACTERISTICS
(@TA=25
OC unless otherwise noted)
Dimensions in inches and (millimeters)
FEATURES
*Low leakage
* Low forward voltage
*Low cost
* Mounting position: Any
MECHANICAL DATA
*Epoxy: Device has UL flammability classification 94V-O
RS-1M
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at T
A
= 105
o
C
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Thermal Resistance (Note 1)
Typical Current Squarad Time
SYMBOL
V
RRM
V
DC
I
FSM
I
2t
T
J
, T
STG
V
RMS
UNITS
Volts
Volts
Amps
2.0
60
14.9
15
50
Amps
A2/Sec
0
C/W
0
C
Operating and Storage Temperature Range
RqJC
RqJA
I
O
-55 to + 150
Volts
100
2RS101M 2RS103M 2RS105M2RS102M 2RS104M
200 800
2RS106M
50
100 200 80050
70 140 56035
1000
2RS107M
1000
700
400
400
280
600
600
420
2010-05
REV:B
CHARACTERISTICS
at Rated DC Blocking Voltage
V
F
SYMBOL
I
R
mAmps
Maximum DC Reverse Current
Maximum Instantaneous Forward Voltage at 2.0A DC Volts
5.0
@T
A
= 100
o
C
@T
A
= 25
o
C
1.1
100
UNITS
2RS101M 2RS103M 2RS105M
2RS102M 2RS104M 2RS106M 2RS107M
NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted.
2. "Fully ROHS compliant", "100% Sn plating (Pb-free)".
.582 (14.8)
.559 (14.2)
.421 (10.7)
.406 (10.3)
.582 (14.8)
.543 (13.8)
.059 (1.5)
.043 (1.1)
.059 (1.5)
.043 (1.1)
.09 (2.3)
.146 (3.7)
.130 (3.3)
.024 (0.6)
.016 (0.4)
.043 (0.9)
.035 (0.6)
.165 (4.2)
.149 (3.8)
.165 (4.2)
.149 (3.8)
.165 (4.2)
.149 (3.8)
3. Available in Halogen-free epoxy by adding suffix -HF after the part nbr.
SINGLE-PHASE GLASS PASSIVATED
SILICON BRIDGE RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Amperes
INSTANTANEOUS FORWARD VOLTAGE, (V)
PERCENT RATED PEAK REVERSE VOLTAGE, (%)
INSTANTANEOUS FORWARD CURRENT, (A)
AMBIENT TEMPERATURE, (OC)
0
0.1
0.4
0.01
0.04
1.0
4
AVERAGE FORWARD CURRENT, (A)
0
0.4
0.8
1.2
2.0
1.6
2.01.50.5 1.0 3.02.5 3.5
150100500
0 20
1.0
0.1
10
100
1000
12010040 60 80 140
RATING AND CHARACTERISTICS CURVES ( 2RS101M THRU 2RS107M )
FIG.3 TYPICAL REVERSE CHARACTERISTICS
FIG.1 TYPICAL FORWARD CURRENT
DERATING CURVE FIG.2 TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
INSTANTANEOUS REVERSE CURRENT, (mA)
NUMBER OF CYCLES AT 60Hz
PEAK FORWARD SURGE CURRENT, (A)
1
0
60
80
100
20
40
120
52 10 20 50 100
FIG.4 MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT
Single Phase Half Wave
60 Hz Inductive or
Resistive Load
T
A
= 100 OC
T
A
= 25 OC
8.3mS Single Half Sine-Wave
JEDEC Method
T
A
= 25 OC
Pulse Width = 300mS
1% Duty Cycle
Marking Description
2 R S 1 0 X M
V Y WW
Rectron Logo Part No.
Year – code:
(Y:Last digit of year&
A:2010, B:2011……)
Week – code:
(WW:01~52)
Voltage-code
1-------50V 5-------600V
2-------100V 6-------800V
3-------200V 7-------1000V
4-------400V
UL Logo
PACKAGING OF DIODE AND BRIDGE RECTIFIERS
TUBE PACK
PACKAGE EA PER BOX INNER BOX SIZE
(mm) CARTON SIZE
(mm) EA PER CARTON WEIGHT(Kg)
RS-1M
1,350 540*118*118 560*259*144 2,700 12.03
PACKING CODE
-C
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi-
lity for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" paramet-
ers which may be included on RECTRON data sheets and/ or specifications ca-
n and do vary in different applications and actual performance may vary over ti-
me. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other rela-
ted applications where a failure or malfunction of component or circuitry may di-
rectly or indirectly cause injury or threaten a life without expressed written appr-
oval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rect-
ron Inc and its subsidiaries harmless against all claims, damages and expendit-
ures.
DISCLAIMER NOTICE
