BC COMPONENTS DATA SHEET KP/MKP 375 AC and pulse metallized polypropylene film capacitors Product specification Supersedes data of March 1998 File under BC Components, BC05 1999 Apr 29 BC Components Product specification AC and pulse metallized polypropylene film KP/MKP 375 KP/MKP RADIAL LACQUERED TYPE PITCH 10/15/22.5/27.5 mm PITCH 7.5 mm (bent back leads) 296x12(full_width) P(bent back leads) = 7.5 mm P = 10 mm P = 15 - 22.5 -27.5 mm CBA951 Fig.1 Simplified outline. FEATURES * 10 to 27.5 mm lead pitch QUICK REFERENCE DATA DESCRIPTION VALUE * Supplied loose and taped Capacitance range (E24 series) 100 pF to 270 nF * Taped products available on request. Capacitance tolerance 5%; 3.5% Rated (DC) voltage 630 V; 1000 V; 1600 V; 2000 V; 2500 V Rated (AC) voltage 300 V; 400 V; 500 V; 600 V; 880 V Rated peak-to-peak voltage 850 V; 1100 V; 1400 V; 1700 V; 2500 V APPLICATIONS * Where high currents and steep pulses occur * For deflection circuits in television receivers. DETAIL SPECIFICATION For more detailed data and test requirements see "Type detail specification HQN-384-17/104". 1999 Apr 29 Climatic category 55/105/56 Maximum application temperature 105 C Rated temperature 85 C Reference specification IEC 60384-17 Performance grade: for C > 5.6 nF and 2500 V grade 1 (long life) for C 5.6 nF grade 2 (general purpose) Stability grade grade 2 2 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 COMPOSITION OF CATALOGUE NUMBER TYPE AND PITCHES MULTIPLIER (nF) 15.0/7.5 mm 10.0 mm 375 CAPACITANCE 15.0 mm (numerically) 22.5 mm 27.5 mm 0.01 1 0.1 2 1 3 10 4 Example: 104 = 10 x 10 = 100 nF 2222 375 XX XX X 1600 V TYPE PACKAGING LEAD CONFIGURATION lead length 5.0 mm loose in box lead length 3.5 mm 375 C-TOL 630 V 1000 V 1600 V monitor type 5% 14 24 34 64 3.5% 15 25 35 65 5% 10 20 30 60 3.5% 11 21 31 61 taped on reel H = 16.0 mm; P0 = 12.7 mm 5% 12 22 32 62 3.5% 13 23 33 63 taped on reel (bent back) H = 16.0 mm; P0 = 15.0 mm 5% 16 26 36 66 3.5% 17 27 37 67 1999 Apr 29 3 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 TYPE AND PITCHES MULTIPLIER (nF) 15.0/7.5 mm 10.0 mm 375 CAPACITANCE 15.0 mm (numerically) 22.5 mm 27.5 mm 0.01 1 0.1 2 1 3 10 4 Example: 104 = 10 x 10 = 100 nF 2222 375 XX XX X 2000 V TYPE PACKAGING LEAD CONFIGURATION lead length 5.0 mm loose in box lead length 3.5 mm 375 taped on reel taped on reel (bent back) 1999 Apr 29 H = 16.0 mm; P0 = 12.7 mm H = 16.0 mm; P0 = 15.0 mm C-TOL 2500 V 2000 V monitor type 2500 V monitor type 5% 44 74 91 84 3.5% 45 75 91 85 5% 40 70 91 80 3.5% 41 71 91 81 5% 42 72 - 82 3.5% 43 73 - 83 5% 46 - - - 3.5% 47 - - - 4 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 KP/MKP 375 GENERAL DATA PITCH 10 mm b l handbook, full pagewidth h seating plane(1) (2) lt P dt A CBA070 (1) Hole 1.0 for dt = 0.6 mm. (2) 0 < 50. Fig.4 Outline. Specific reference data for the 630 V DC capacitors VALUE DESCRIPTION Tangent of loss angle Rated voltage pulse slope (dU/dt)R at 630 V (DC) R between leads at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz at 100 kHz 6 x 10-4 10 x 10-4 15000 V/s >100000 M >100000 M >400 V 1008 V; 1 minute 2840 V; 1 minute Available 630 V DC versions PACKAGING(1) DIMENSIONS lt = 5.0 1.0 mm Loose in box lt = 3.5 0.5 mm Taped on reel H = 16.0 mm; P0 = 12.7 mm; note 2 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 5% 3.5% 5% 3.5% 5% 3.5% 2222 375 14... 2222 375 15... 2222 375 10... 2222 375 11... 2222 375 12... 2222 375 13... preferred on request on request on request on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 5 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 URdc = 630 V; URac = 300 V/Up-p = 850 V CATALOGUE NUMBER(1) C (pF) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 5.0 1.0 mm C-tol = 5% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm; A = 2.0 +1.0/-0.5 mm 680 750 5.0 x 13.0 x 14.5 2222 375 14681 0.65 0.65 2222 375 14751 820 0.70 2222 375 14821 910 0.70 2222 375 14911 1000 0.70 2222 375 14102 1100 0.75 2222 375 14112 0.75 2222 375 14122 1200 5.5 x 13.5 x 14.5 1300 0.75 2222 375 14132 1500 0.80 2222 375 14152 1600 0.85 2222 375 14162 1800 0.80 2222 375 14182 2000 2200 6.0 x 14.0 x 14.5 2400 2700 6.5 x 14.5 x 14.5 0.85 2222 375 14202 0.90 2222 375 14222 1.0 2222 375 14242 1.1 2222 375 14272 Note 1. The shading indicates preferred types. 1999 Apr 29 6 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 KP/MKP 375 GENERAL DATA PITCH 15 mm PITCH 7.5 mm (bent back leads) l ndbook, full pagewidth l b seating plane(1) b h h' F' (3) (2) F lt H dt 10 P Odt A 15 CBA818 (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. (3) F - F' < 0.3 m. F = 7.5 +0.6/-0.1 mm. Fig.5 Outline. Specific reference data for the 630 V DC capacitors VALUE DESCRIPTION Tangent of loss angle Rated voltage pulse slope (dU/dt)R at 630 V (DC) R between leads at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz 6 x 10-4 at 100 kHz 10 x 10-4 8000 V/s >100000 M >100000 M >400 V 1008 V; 1 minute 2840 V; 1 minute Available 630 V DC versions PACKAGING(1) DIMENSIONS C-tol 5% 3.5% 5% 3.5% 5% 3.5% 5% 3.5% lt = 5.0 1.0 mm Loose in box lt = 3.5 0.5 mm Taped on reel H = 16.0 mm; P0 = 12.7 mm; note 2 Taped on reel (bent back) H = 16.0 mm; P0 = 15.0 mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 375 14... 2222 375 15... 2222 375 10... 2222 375 11... 2222 375 12... 2222 375 13... 2222 375 16... 2222 375 17... ORDERING preferred on request on request on request on request on request preferred on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 7 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 URdc = 630 V; URac = 300 V/Up-p = 850 V CATALOGUE NUMBER C (pF) DIMENSIONS(1) bmax x h (h')max x lmax (mm) MASS (g) LOOSE IN BOX REEL DIAMETER = 500 mm; H = 16.0 mm; P0 = 15.0 mm(2) lt = 5.0 1.0 mm pitch 7.5 mm (bent back) C-tol = 5% C-tol = 5% catalogue number(3) last 5 digits(3) Pitch = 15.0 0.4 mm (pitch = 7.5 0.4 mm for bent back leads); dt = 0.80 0.08 mm; A = 2.5 +1.5/-0.5 mm 3000 3300 3600 3900 4300 4700 5100 5600 6200 6800 7500 8200 9100 10000 11000 12000 13000 15000 16000 18000 20000 22000 24000 27000 30000 33000 36000 39000 2.0 2222 375 14302 2222 375 14332 2222 375 14362 2222 375 14392 2222 375 14432 2222 375 14472 2222 375 14512 2222 375 14562 2222 375 14622 2222 375 14682 2222 375 14752 2222 375 14822 2222 375 14912 2222 375 14103 2222 375 14113 2222 375 14123 2222 375 14133 2222 375 14153 2222 375 14163 2222 375 14183 2222 375 14203 2222 375 14223 2222 375 14243 2222 375 14273 2222 375 14303 2222 375 14333 .. 16302 .. 16332 .. 16362 .. 16392 .. 16432 .. 16472 .. 16512 .. 16562 .. 16622 .. 16682 .. 16752 .. 16822 .. 16912 .. 16103 .. 16113 .. 16123 .. 16133 .. 16153 .. 16163 .. 16183 .. 16203 .. 16223 .. 16243 .. 16273 .. 16303 .. 16333 2.3 on request on request 5.0 x 14.0 (15.5) x 18.5 1.0 5.5 x 14.5 (16.0) x 18.5 1.1 6.0 x 15.0 (16.5) x 18.5 1.2 6.5 x 15.5 (17.0) x 18.5 1.3 7.0 x 16.0 (17.5) x 18.5 7.5 x 16.5 (18.0) x 18.5 1.5 1.6 8.0 x 17.0 (18.5) x 18.5 1.9 8.5 x 17.5 (19.0) x 18.5 9.5 x 18.5 (20.0) x 18.5 Notes 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information": a) For pitch = 15.0 mm: H = 16.0 mm and P0 = 12.7 mm. b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request. 3. The shading indicates preferred types. 1999 Apr 29 8 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 KP/MKP 375 GENERAL DATA PITCH 22.5/27.5 mm b l handbook, full pagewidth h seating plane(1) (2) lt P dt A CBA070 (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. Fig.6 Outline. Specific reference data for the 630 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: P = 22.5 mm P = 27.5 mm Rated voltage pulse slope (dU/dt)R at 630 V (DC): P = 22.5 mm P = 27.5 mm R between leads at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz at 100 kHz 8 x 10-4 8 x 10-4 15 x 10-4 20 x 10-4 2800 V/s 1900 V/s >100000 M >100000 M >400 V 1008 V; 1 minute 2840 V; 1 minute Available 630 V DC versions PACKAGING(1) DIMENSIONS C-tol 5% 3.5% 5% 3.5% 5% 3.5% lt = 5.0 1.0 mm Loose in box lt = 3.5 0.5 mm Taped on reel H = 16.0 mm; P0 = 12.7 mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 375 14... 2222 375 15... 2222 375 10... 2222 375 11... 2222 375 12... 2222 375 13... ORDERING preferred on request on request on request on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 9 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 URdc = 630 V; URac = 300 V/Up-p = 850 V CATALOGUE NUMBER(1) C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 5.0 1.0 mm C-tol = 5% Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.036 2222 375 14363 0.039 2222 375 14393 0.043 2222 375 14433 0.047 7.0 x 20.0 x 26.0 2222 375 14473 2.7 0.051 2222 375 14513 0.056 2222 375 14563 0.062 2222 375 14623 0.068 7.5 x 20.5 x 26.0 3.0 0.075 8.0 x 21.0 x 26.0 3.3 8.5 x 21.5 x 26.0 3.8 2222 375 14913 0.1 9.0 x 22.0 x 26.0 4.0 2222 375 14104 0.11 9.5 x 22.5 x 26.0 4.3 2222 375 14114 0.12 10.0 x 23.0 x 26.0 4.7 2222 375 14124 0.082 0.091 2222 375 14683 2222 375 14753 2222 375 14823 Pitch = 27.5 0.5 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.13 9.5 x 22.5 x 30.0 4.7 2222 375 14134 0.15 10.0 x 23.0 x 30.0 5.2 2222 375 14154 0.16 10.5 x 23.5 x 30.0 5.5 2222 375 14164 0.18 11.0 x 24.0 x 30.0 6.0 2222 375 14184 0.2 11.5 x 24.5 x 30.0 6.6 2222 375 14204 0.22 12.5 x 25.5 x 30.0 7.1 2222 375 14224 0.24 13.0 x 26.0 x 30.0 7.7 2222 375 14244 0.27 13.5 x 26.5 x 30.0 8.5 2222 375 14274 Note 1. The shading indicates preferred types. 1999 Apr 29 10 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 KP/MKP 375 GENERAL DATA PITCH 10 mm b l handbook, full pagewidth h seating plane(1) (2) lt P dt A CBA070 (1) Hole 1.0 for dt = 0.6 mm. (2) 0 < 50 Fig.7 Outline. Specific reference data for the 1000 V DC capacitors VALUE DESCRIPTION Tangent of loss angle Rated voltage pulse slope (dU/dt)R at 1000 V (DC) R between leads at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz at 100 kHz 6 x 10-4 10 x 10-4 27000 V/s >100000 M >100000 M >500 V 1600 V; 1 minute 2840 V; 1 minute Available 1000 V DC versions PACKAGING(1) DIMENSIONS lt = 5.0 1.0 mm Loose in box lt = 3.50.5 mm Taped on reel H = 16.0 mm; P0 = 12.7 mm; note 2 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 5% 3.5% 5% 3.5% 5% 3.5% 2222 375 24... 2222 375 25... 2222 375 20... 2222 375 21... 2222 375 22... 2222 375 23... preferred on request on request on request on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 11 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 URdc = 1000 V; URac = 400 V/Up-p = 1100 V CATALOGUE NUMBER(1) C (pF) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 5.0 1.0 mm C-tol = 5% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm; A = 2.0 +1.0/-0.5 mm 2222 375 24101 100 110 120 5.0 x 13.0 x 14.5 2222 375 24111 0.50 2222 375 24121 130 2222 375 24131 150 0.55 2222 375 24151 160 0.55 2222 375 24161 180 0.55 2222 375 24181 200 0.55 2222 375 24201 220 0.60 2222 375 24221 240 0.60 2222 375 24241 270 0.60 2222 375 24271 300 0.60 2222 375 24301 330 0.60 2222 375 24331 0.60 2222 375 24361 360 390 5.5 x 13.5 x 14.5 0.65 2222 375 24391 430 0.70 2222 375 24431 470 0.75 2222 375 24471 510 0.75 2222 375 24511 560 0.80 2222 375 24561 620 0.80 2222 375 24621 680 0.80 2222 375 24681 750 0.70 2222 375 24751 820 0.70 2222 375 24821 910 0.70 2222 375 24911 1000 0.75 2222 375 24102 1100 0.85 2222 375 24112 0.90 2222 375 24122 1200 6.0 x 14.0 x 14.5 1300 0.85 2222 375 24132 1500 0.90 2222 375 24152 Note 1. The shading indicates preferred types. 1999 Apr 29 12 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 KP/MKP 375 GENERAL DATA PITCH 15 mm PITCH 7.5 mm (bent back leads) l ook, full pagewidth l b seating plane(1) b h h' F' (3) (2) F lt H dt 10 P A Odt 15 CBA818 (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. (3) F - F' < 0.3 mm. F = 7.5 +0.6/-0.1 mm. Fig.8 Outline. Specific reference data for the 1000 V DC capacitors VALUE DESCRIPTION Tangent of loss angle Rated voltage pulse slope (dU/dt)R at 1000 V (DC) R between leads at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz 6 x 10-4 at 100 kHz 10 x 10-4 15000 V/s >100000 M >100000 M >500 V 1600 V; 1 minute 2840 V; 1 minute Available 1000 V DC versions PACKAGING(1) DIMENSIONS C-tol 5% 3.5% 5% 3.5% 5% 3.5% 5% 3.5% lt = 5.0 1.0 mm Loose in box lt = 3.50.5 mm Taped on reel H = 16.0 mm; P0 = 12.7 mm; note 2 Taped on reel (bent back) H = 16.0 mm; P0 = 15.0 mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 375 24... 2222 375 25... 2222 375 20... 2222 375 21... 2222 375 22... 2222 375 23... 2222 375 26... 2222 375 27... ORDERING preferred on request on request on request on request on request preferred on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 13 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 URdc = 1000 V; URac = 400 V/Up-p = 1100 V CATALOGUE NUMBER C (pF) DIMENSIONS(1) bmax x h (h')max x lmax (mm) LOOSE IN BOX REEL DIAMETER = 500 mm; H = 16.0 mm; P0 = 15.0 mm(2) lt = 5.0 1.0 mm pitch 7.5 mm (bent back) C-tol = 5% C-tol = 5% catalogue number(3) last 5 digits(3) MASS (g) Pitch = 15.0 0.4 mm (Pitch = 7.5 0.4 mm for bent back leads); dt = 0.80 0.08 mm; A = 2.5 +1.5/-0.5 mm 1600 2222 375 24162 .. 26162 1800 2222 375 24182 .. 26182 2000 5.5 x 14.5 (16.0) x 18.5 2222 375 24202 .. 26202 2200 2222 375 24222 .. 26222 2400 2222 375 24242 .. 26242 2700 2222 375 24272 .. 26272 3000 2222 375 24302 .. 26302 3300 2222 375 24332 .. 26332 3600 2222 375 24362 .. 26362 1.1 3900 2222 375 24392 .. 26392 2222 375 24432 .. 26432 2222 375 24472 .. 26472 5100 2222 375 24512 .. 26512 5600 2222 375 24562 .. 26562 6200 2222 375 24622 .. 26622 6800 2222 375 24682 .. 26682 7500 2222 375 24752 .. 26752 4300 6.0 x 15.0 (16.5) x 18.5 1.2 4700 7.0 x 16.0 (17.5) x 18.5 1.4 2222 375 24822 .. 26822 2222 375 24912 .. 26912 10000 7.5 x 16.5 (18.0) x 18.5 1.6 2222 375 24103 .. 26103 11000 8.0 x 17.0 (18.5) x 18.5 1.8 2222 375 24113 .. 26113 2222 375 24123 .. 26123 13000 8.5 x 17.5 (19.0) x 18.5 1.9 2222 375 24133 .. 26133 15000 9.0 x 18.0 (19.5) x 18.5 2.1 2222 375 24153 .. 26153 8200 9100 12000 Notes 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information": a) For pitch = 15.0 mm: H = 16.0 mm and P0 = 12.7 mm. b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request. 3. The shading indicates preferred types. 1999 Apr 29 14 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 KP/MKP 375 GENERAL DATA PITCH 22.5/27.5 mm b l handbook, full pagewidth h seating plane(1) (2) lt P dt A (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. CBA070 Fig.9 Outline. Specific reference data for the 1000 V DC capacitors VALUE DESCRIPTION at 10 kHz at 100 kHz Tangent of loss angle: P = 22.5 mm 6 x 10-4 10 x 10-4 P = 27.5 mm 6 x 10-4 15 x 10-4 Rated voltage pulse slope (dU/dt)R at 1000 V (DC): P = 22.5 mm 5000 V/s P = 27.5 mm 3300 V/s R between leads at 500 V; 1 minute >100000 M R between interconnected leads and case; 500 V; 1 minute >100000 M Ionization (AC) voltage (typical value) at 50 pC peak discharge >500 V Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s for C 47 nF 1600 V; 1 minute for C > 47 nF [ 1.6 - ( 0.0364 x C - 47 ) ] x 1000 V ;1 minute Withstanding (DC) voltage between leads and case 2840 V; 1 minute Available 1000 V DC versions PACKAGING(1) DIMENSIONS C-tol 5% 3.5% 5% 3.5% 5% 3.5% lt = 5.0 1.0 mm Loose in box lt = 3.50.5 mm Taped on reel H = 16.0 mm; P0 = 12.7 mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 375 24... 2222 375 25... 2222 375 20... 2222 375 21... 2222 375 22... 2222 375 23... ORDERING preferred on request on request on request on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 15 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 URdc = 1000 V; URac = 400 V/Up-p = 1100 V CATALOGUE NUMBER(1) C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 5.0 1.0 mm C-tol = 5% Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.016 6.0 x 19.0 x 26.0 2.2 6.5 x 19.5 x 26.0 2.5 0.024 7.0 x 20.0 x 26.0 2.7 0.027 7.5 x 20.5 x 26.0 3.1 0.033 8.0 x 21.0 x 26.0 3.4 0.036 8.5 x 21.5 x 26.0 3.7 9.0 x 22.0 x 26.0 4.1 0.018 0.02 0.022 0.03 0.039 0.043 2222 375 24163 2222 375 24183 2222 375 24203 2222 375 24223 2222 375 24243 2222 375 24273 2222 375 24303 2222 375 24333 2222 375 24363 2222 375 24393 2222 375 24433 Pitch = 27.5 0.5 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.047 6.0 x 19.0 x 30.0 3.1 0.051 7.5 x 20.5 x 30.0 3.4 0.062 8.0 x 21.0 x 30.0 3.8 2222 375 24623 0.068 8.5 x 21.5 x 30.0 4.0 2222 375 24683 0.075 9.0 x 22.0 x 30.0 4.4 2222 375 24753 0.082 9.5 x 22.5 x 30.0 4.7 2222 375 24823 0.091 10.0 x 23.0 x 30.0 5.1 2222 375 24913 0.1 10.5 x 23.5 x 30.0 5.5 2222 375 24104 0.11 11.0 x 24.0 x 30.0 5.9 2222 375 24114 0.12 11.5 x 24.5 x 30.0 6.3 2222 375 24124 0.13 12.0 x 25.0 x 30.0 6.8 2222 375 24134 0.15 12.5 x 25.5 x 30.0 7.6 2222 375 24154 0.056 2222 375 24473 2222 375 24513 2222 375 24563 Note 1. The shading indicates preferred types. 1999 Apr 29 16 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 KP/MKP 375 GENERAL DATA PITCH 15 mm PITCH 7.5 mm (bent back leads) l book, full pagewidth l b seating plane(1) b h h' F' (3) (2) F lt H dt 10 P A Odt 15 (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. (3) F - F' < 0.3 m. F = 7.5 +0.6/-0.1 mm. CBA818 Fig.10 Outline. Specific reference data for the 1600 V DC capacitors VALUE DESCRIPTION Tangent of loss angle Rated voltage pulse slope (dU/dt)R at 1600 V (DC) R between leads at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz 6 x 10-4 at 100 kHz 10 x 10-4 21000 V/s >100000 M >100000 M >550 V 2560 V; 1 minute 2840 V; 1 minute Available 1600 V DC versions PACKAGING(1) DIMENSIONS C-tol 5% 3.5% 5% 3.5% 5% 3.5% 5% 3.5% lt = 5.0 1.0 mm Loose in box lt = 3.5 0.5 mm Taped on reel H = 16.0 mm; P0 = 12.7 mm; note 2 Taped on reel (bent back) H = 16.0 mm; P0 = 15.0 mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 375 34... 2222 375 35... 2222 375 30... 2222 375 31... 2222 375 32... 2222 375 33... 2222 375 36... 2222 375 37... ORDERING preferred on request on request on request on request on request preferred on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 17 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 URdc = 1600 V; URac = 500 V/Up-p = 1400 V CATALOGUE NUMBER C (pF) DIMENSIONS(1) bmax x h (h')max x lmax (mm) LOOSE IN BOX REEL DIAMETER = 500 mm; H = 16.0 mm; P0 = 15.0 mm(2) lt = 5.0 1.0 mm pitch 7.5 mm (bent back) C-tol = 5% C-tol = 5% catalogue number(3) last 5 digits(3) MASS (g) Pitch = 15.0 0.4 mm (pitch = 7.5 0.4 mm for bent back leads); dt = 0.80 0.08 mm; A = 2.5 +1.5/-0.5 mm 680 750 5.5 x 14.5 (15.0) x 18.5 0.75 820 2222 375 34681 .. 36681 2222 375 34751 .. 36751 2222 375 34821 .. 36821 910 0.80 2222 375 34911 .. 36911 1000 0.85 2222 375 34102 .. 36102 0.85 2222 375 34112 .. 36112 1200 0.90 2222 375 34122 .. 36122 1300 0.95 2222 375 34132 .. 36132 2222 375 34152 .. 36152 1100 1500 6.0 x 15.0 (15.5) x 18.5 5.5 x 14.5 (16.0) x 18.5 1.1 1800 6.0 x 15.0 (16.5) x 18.5 1.2 2000 6.5 x 15.5 (17.0) x 18.5 1.3 2400 7.0 x 16.0 (17.5) x 18.5 1.4 2700 7.5 x 16.5 (18.0) x 18.5 1.6 3300 8.0 x 17.0 (18.5) x 18.5 1.7 3600 8.5 x 17.5 (19.0) x 18.5 1.8 2222 375 34362 .. 36362 3900 9.0 x 18.0 (19.5) x 18.5 2.0 1600 2200 3000 4300 2222 375 34162 .. 36162 2222 375 34182 .. 36182 2222 375 34202 .. 36202 2222 375 34222 .. 36222 2222 375 34242 .. 36242 2222 375 34272 .. 36272 2222 375 34302 .. 36302 2222 375 34332 .. 36332 2222 375 34392 .. 36392 2222 375 34432 .. 36432 Notes 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information": a) For pitch = 15.0 mm: H = 16.0 mm and P0 = 12.7 mm. b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request. 3. The shading indicates preferred types. 1999 Apr 29 18 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 KP/MKP 375 GENERAL DATA PITCH 22.5/27.5 mm b l handbook, full pagewidth h seating plane(1) (2) lt P dt A CBA070 (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. Fig.11 Outline. Specific reference data for the 1600 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: P = 22.5 mm P = 27.5 mm Rated voltage pulse slope (dU/dt)R at 1600 V (DC): P = 22.5 mm P = 27.5 mm R between leads at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz at 100 kHz 6 x 10-4 6 x 10-4 10 x 10-4 15 x 10-4 7000 V/s 4700 V/s >100000 M >100000 M >550 V 2560 V; 1 minute 2840 V; 1 minute Available 1600 V DC versions PACKAGING(1) DIMENSIONS C-tol 5% 3.5% 5% 3.5% 5% 3.5% lt = 5.0 1.0 mm Loose in box lt = 3.5 0.5 mm Taped on reel H = 16.0 mm; P0 = 12.7 mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 375 34... 2222 375 35... 2222 375 30... 2222 375 31... 2222 375 32... 2222 375 33... ORDERING preferred on request on request on request on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 19 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 URdc = 1600 V; URac = 500 V/Up-p = 1400 V CATALOGUE NUMBER(1) C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 5.0 1.0 mm C-tol = 5% Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 2222 375 34472 0.0047 0.0051 6.0 x 19.0 x 26.0 2222 375 34512 2.0 0.0056 0.0062 0.0068 0.0075 0.0082 2222 375 34562 6.5 x 19.5 x 26.0 2.1 7.0 x 20.0 x 26.0 2.3 2222 375 34622 2222 375 34682 2222 375 34752 2222 375 34822 0.0091 7.5 x 20.5 x 26.0 2.5 2222 375 34912 0.01 8.0 x 21.0 x 26.0 2.6 2222 375 34103 0.011 8.5 x 21.5 x 26.0 2.9 0.012 2222 375 34113 2222 375 34123 0.013 9.0 x 22.0 x 26.0 3.1 2222 375 34133 0.015 9.5 x 22.5 x 26.0 3.5 2222 375 34153 0.016 10.0 x 23.0 x 26.0 3.6 2222 375 34163 0.018 10.5 x 23.5 x 26.0 4.0 2222 375 34183 Pitch = 27.5 0.5 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.02 9.0 x 22.0 x 30.0 4.2 2222 375 34203 0.022 9.5 x 22.5 x 30.0 4.4 2222 375 34223 0.024 10.0 x 23.0 x 30.0 4.7 2222 375 34243 0.027 10.5 x 23.5 x 30.0 5.2 2222 375 34273 0.03 11.0 x 24.0 x 30.0 5.6 2222 375 34303 0.033 11.5 x 24.5 x 30.0 6.0 2222 375 34333 0.036 12.0 x 25.0 x 30.0 6.5 2222 375 34363 0.039 12.5 x 25.5 x 30.0 6.9 2222 375 34393 Note 1. The shading indicates preferred types. 1999 Apr 29 20 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 KP/MKP 375 GENERAL DATA PITCH 15 mm PITCH 7.5 mm (bent back leads) l ndbook, full pagewidth l b seating plane(1) b h h' F' (3) (2) F lt H dt 10 P Odt A 15 (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. (3) F - F' < 0.3 mm. F = 7.5 +0.6/-0.1 mm. CBA818 Fig.12 Outline. Specific reference data for the 1600 V DC capacitors (monitor type) VALUE DESCRIPTION Tangent of loss angle Rated voltage pulse slope (dU/dt)R at 1600 V (DC) R between leads at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz 6 x 10-4 at 100 kHz 10 x 10-4 21000 V/s >100000 M >100000 M >550 V 2560 V; 1 minute 2840 V; 1 minute Available 1600 V DC versions (monitor type) PACKAGING(1) DIMENSIONS C-tol 5% 3.5% 5% 3.5% 5% 3.5% 5% 3.5% lt = 5.0 1.0 mm Loose in box lt = 3.5 0.5 mm Taped on reel H = 16.0 mm; P0 = 12.7 mm; note 2 Taped on reel (bent back) H = 16.0 mm; P0 = 15.0 mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 375 64... 2222 375 65... 2222 375 60... 2222 375 61... 2222 375 62... 2222 375 63... 2222 375 66... 2222 375 67... ORDERING preferred on request on request on request on request on request preferred on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 21 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 URdc = 1600 V; URac = 500 V/Up-p = 1400 V (monitor type) CATALOGUE NUMBER C (pF) DIMENSIONS(1) bmax x h (h')max x lmax (mm) LOOSE IN BOX REEL DIAMETER = 500 mm; H = 16.0 mm; P0 = 15.0 mm(2) lt = 5.0 1.0 mm pitch 7.5 mm (bent back) C-tol = 5% C-tol = 5% catalogue number(3) last 5 digits(3) MASS (g) Pitch = 15.0 0.4 mm (pitch = 7.5 0.4 mm for bent back leads); dt = 0.80 0.08 mm; A = 2.5 +1.5/-0.5 mm r o t 1000 7.5 x 16.5 (18.0) x 18.5 1100 8.0 x 17.0 (18.5) x 18.5 1200 1300 1500 1600 Notes ni 1.6 1.7 2222 375 64102 .. 66102 2222 375 64112 .. 66112 2222 375 64122 .. 66122 8.5 x 17.5 (19.0) x 18.5 1.8 2222 375 64132 .. 66132 9.0 x 18.0 (19.5) x 18.5 2.0 2222 375 64152 .. 66152 9.5 x 18.5 (20.0) x 18.5 2.3 2222 375 64162 .. 66162 o M 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information": a) For pitch = 15.0 mm: H = 16.0 mm and P0 = 12.7 mm. b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request. 3. The shading indicates preferred types. 1999 Apr 29 22 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 KP/MKP 375 GENERAL DATA PITCH 22.5/27.5 mm b l handbook, full pagewidth h seating plane(1) (2) lt P dt A (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. CBA070 Fig.13 Outline. Specific reference data for the 1600 V DC capacitors (monitor type) VALUE DESCRIPTION Tangent of loss angle: P = 22.5 mm P = 27.5 mm Rated voltage pulse slope (dU/dt)R at 1600 V (DC): P = 22.5 mm P = 27.5 mm R between leads at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz at 100 kHz 6 x 10-4 6 x 10-4 10 x 10-4 15 x 10-4 7000 V/s 4700 V/s >100000 M >100000 M >550 V 2560 V; 1 minute 2840 V; 1 minute Available 1600 V DC versions (monitor type) PACKAGING(1) DIMENSIONS C-tol 5% 3.5% 5% 3.5% 5% 3.5% lt = 5.0 1.0 mm Loose in box lt = 3.5 0.5 mm Taped on reel H = 16.0 mm; P0 = 12.7 mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 375 64... 2222 375 65... 2222 375 60... 2222 375 61... 2222 375 62... 2222 375 63... ORDERING preferred on request on request on request on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 23 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 URdc = 1600 V; URac = 500 V/Up-p = 1400 V (monitor type) CATALOGUE NUMBER(1) C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 5.0 1.0 mm C-tol = 5% Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.0018 0.002 0.0022 0.0024 0.0027 0.003 0.0033 0.0036 0.0039 0.0043 0.0047 0.0051 0.0056 0.0062 0.0068 0.0075 0.0082 6.0 x 19.0 x 26.0 2.0 6.5 x 19.5 x 26.0 2.1 7.0 x 20.0 x 26.0 2.3 7.5 x 20.5 x 26.0 2.5 8.0 x 21.0 x 26.0 2.6 8.5 x 21.5 x 26.0 2.9 9.0 x 22.0 x 26.0 9.5 x 22.5 x 26.0 10.0 x 23.0 x 26.0 10.5 x 23.5 x 26.0 3.1 3.5 3.6 4.0 r o t ni o M 2222 375 64182 2222 375 64202 2222 375 64222 2222 375 64242 2222 375 64272 2222 375 64302 2222 375 64332 2222 375 64362 2222 375 64392 2222 375 64432 2222 375 64472 2222 375 64512 2222 375 64562 2222 375 64622 2222 375 64682 2222 375 64752 2222 375 64822 Pitch = 27.5 0.5 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.0091 0.01 0.011 0.012 0.013 0.015 0.016 0.018 0.02 0.022 0.024 0.027 0.03 0.033 0.036 0.039 10.0 x 23.0 x 30.0 10.5 x 23.5 x 30.0 11.0 x 24.0 x 30.0 11.5 x 24.5 x 30.0 12.0 x 25.0 x 30.0 13.0 x 26.0 x 30.0 13.5 x 26.5 x 30.0 14.5 x 27.5 x 30.0 4.7 5.2 5.6 6.0 6.5 6.9 7.3 7.8 15.0 x 29.0 x 30.0 8.2 r o it n o M 2222 375 64912 2222 375 64103 2222 375 64113 2222 375 64123 2222 375 64133 2222 375 64153 2222 375 64163 2222 375 64183 2222 375 64203 2222 375 64223 2222 375 64243 2222 375 64273 2222 375 64303 2222 375 64333 2222 375 64363 2222 375 64393 Note 1. The shading indicates preferred types. 1999 Apr 29 24 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 KP/MKP 375 GENERAL DATA PITCH 15 mm PITCH 7.5 mm (bent back leads) l handbook, full pagewidth l b seating plane(1) b h h' F' (3) (2) F lt H dt 10 P Odt A 15 (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. (3) F - F' < 0.3 mm. F = 7.5 +0.6/-0.1 mm. CBA818 Fig.14 Outline. Specific reference data for the 2000 V DC capacitors VALUE DESCRIPTION Tangent of loss angle Rated voltage pulse slope (dU/dt)R at 2000 V (DC) R between leads at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz 6 x 10-4 at 100 kHz 10 x 10-4 30000 V/s >100000 M >100000 M >600 V 3200 V; 1 minute 2840 V; 1 minute Available 2000 V DC versions PACKAGING(1) DIMENSIONS C-tol 5% 3.5% 5% 3.5% 5% 3.5% 5% 3.5% lt = 5.0 1.0 mm Loose in box lt = 3.5 0.5 mm Taped on reel H = 16.0 mm; P0 = 12.7 mm; note 2 Taped on reel (bent back) H = 16.0 mm; P0 = 15.0 mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 375 44... 2222 375 45... 2222 375 40... 2222 375 41... 2222 375 42... 2222 375 43... 2222 375 46... 2222 375 47... ORDERING preferred on request on request on request on request on request preferred on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 25 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 URdc = 2000 V; URac = 600 V/Up-p = 1700 V CATALOGUE NUMBER C (pF) DIMENSIONS(1) bmax x h (h')max x lmax (mm) MASS (g) LOOSE IN BOX REEL DIAMETER = 500 mm; H = 16.0 mm; P0 = 15.0 mm(2) lt = 5.0 1.0 mm pitch 7.5 mm (bent back) C-tol = 5% C-tol = 5% catalogue number(3) last 5 digits(3) Pitch = 15.0 0.4 mm (pitch = 7.5 0.4 mm for bent back leads); dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 100 0.75 2222 375 44101 .. 46101 110 0.75 2222 375 44111 .. 46111 120 0.75 2222 375 44121 .. 46121 130 0.75 2222 375 44131 .. 46131 150 0.75 2222 375 44151 .. 46151 160 0.75 2222 375 44161 .. 46161 180 0.75 2222 375 44181 .. 46181 200 0.75 2222 375 44201 .. 46201 220 0.75 2222 375 44221 .. 46221 240 0.75 2222 375 44241 .. 46241 5.5 x 14.5 (15.0) x 18.5 270 0.75 2222 375 44271 .. 46271 300 0.75 2222 375 44301 .. 46301 330 0.75 2222 375 44331 .. 46331 360 0.75 2222 375 44361 .. 46361 390 0.75 2222 375 44391 .. 46391 430 0.75 2222 375 44431 .. 46431 470 0.80 2222 375 44471 .. 46471 510 0.80 2222 375 44511 .. 46511 560 0.80 2222 375 44561 .. 46561 620 0.85 2222 375 44621 .. 46621 680 6.0 x 15.0 (15.5) x 18.5 0.85 2222 375 44681 .. 46681 750 0.90 2222 375 44751 .. 46751 820 6.5 x 15.5 (16.0) x 18.5 0.95 2222 375 44821 .. 46821 910 5.5 x 14.5 (16.0) x 18.5 1.1 2222 375 44911 .. 46911 1000 2222 375 44102 .. 46102 6.0 x 15.0 (16.5) x 18.5 1.2 1100 2222 375 44112 .. 46112 1200 2222 375 44122 .. 46122 1300 6.5 x 15.5 (17.0) x 18.5 1.3 2222 375 44132 .. 46132 2222 375 44152 .. 46152 1500 7.0 x 16.0 (17.5) x 18.5 1.4 1600 2222 375 44162 .. 46162 7.5 x 16.5 (18.0) x 18.5 1.5 1800 2222 375 44182 .. 46182 2000 8.0 x 17.0 (18.5) x 18.5 1.6 2222 375 44202 .. 46202 2222 375 44222 .. 46222 2200 8.5 x 17.5 (19.0) x 18.5 1.7 2400 9.0 x 18.0 (19.5) x 18.5 1.8 2222 375 44242 .. 46242 2700 9.5 x 18.5 (20.0) x 18.5 2.0 2222 375 44272 .. 46272 Notes 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications see chapter "Packaging information": a) For pitch = 15.0 mm: H = 16.0 mm and P0 = 12.7 mm. b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request. 3. The shading indicates preferred types. 1999 Apr 29 26 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 KP/MKP 375 GENERAL DATA PITCH 22.5/27.5 mm b l handbook, full pagewidth h seating plane(1) (2) lt P dt A CBA070 (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. Fig.15 Outline. Specific reference data for the 2000 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: P = 22.5 mm P = 27.5 mm Rated voltage pulse slope (dU/dt)R at 2000 V (DC): P = 22.5 mm P = 27.5 mm R between leads at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz at 100 kHz 6 x 10-4 6 x 10-4 10 x 10-4 15 x 10-4 10000 V/s 6700 V/s >100000 M >100000 M >600 V 3200 V; 1 minute 2840 V; 1 minute Available 2000 V DC versions PACKAGING(1) DIMENSIONS C-tol 5% 3.5% 5% 3.5% 5% 3.5% lt = 5.0 1.0 mm Loose in box lt = 3.5 0.5 mm Taped on reel H = 16.0 mm; P0 = 12.7 mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 375 44... 2222 375 45... 2222 375 40... 2222 375 41... 2222 375 42... 2222 375 43... ORDERING preferred on request on request on request on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 27 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 URdc = 2000 V; URac = 600 V/Up-p = 1700 V CATALOGUE NUMBER(1) C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 5.0 1.0 mm C-tol = 5% Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.003 0.0033 0.0036 2222 375 44302 6.0 x 19.0 x 26.0 2222 375 44332 2.1 2222 375 44362 2222 375 44392 0.0039 0.0043 2222 375 44432 6.5 x 19.5 x 26.0 2.3 7.0 x 20.0 x 26.0 2.6 0.0062 7.5 x 20.5 x 26.0 2.8 0.0068 8.0 x 21.0 x 26.0 3.0 0.0082 8.5 x 21.5 x 26.0 3.3 2222 375 44822 0.0091 9.0 x 22.0 x 26.0 3.6 2222 375 44912 0.01 9.5 x 22.5 x 26.0 3.8 2222 375 44103 0.0047 0.0051 0.0056 0.0075 2222 375 44472 2222 375 44512 2222 375 44562 2222 375 44622 2222 375 44682 2222 375 44752 Pitch = 27.5 0.5 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.011 9.0 x 22.0 x 30.0 3.8 2222 375 44113 0.012 9.5 x 22.5 x 30.0 4.1 2222 375 44123 0.013 10.0 x 23.0 x 30.0 4.4 2222 375 44133 0.015 10.5 x 23.5 x 30.0 4.9 2222 375 44153 0.016 11.0 x 24.0 x 30.0 5.1 2222 375 44163 0.018 11.5 x 24.5 x 30.0 5.6 2222 375 44183 0.02 12.5 x 25.5 x 30.0 6.1 2222 375 44203 0.022 13.0 x 26.0 x 30.0 6.5 2222 375 44223 Note 1. The shading indicates preferred types. 1999 Apr 29 28 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 KP/MKP 375 GENERAL DATA PITCH 22.5/27.5 mm b l handbook, full pagewidth h seating plane(1) (2) lt P dt A CBA070 (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. Fig.16 Outline. Specific reference data for the 2000 V DC capacitors (monitor type) VALUE DESCRIPTION Tangent of loss angle: P = 22.5 mm P = 27.5 mm Rated voltage pulse slope (dU/dt)R at 2000 V (DC): P = 22.5 mm P = 27.5 mm R between leads at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz at 100 kHz 6 x 10-4 6 x 10-4 10 x 10-4 15 x 10-4 10000 V/s 6700 V/s >100000 M >100000 M >600 V 3200 V; 1 minute 2840 V; 1 minute Available 2000 V DC versions (monitor type) PACKAGING(1) DIMENSIONS C-tol 5% 3.5% 5% 3.5% 5% 3.5% lt = 5.0 1.0 mm Loose in box lt = 3.5 0.5 mm Taped on reel H = 16.0 mm; P0 = 12.7 mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 375 74... 2222 375 75... 2222 375 70... 2222 375 71... 2222 375 72... 2222 375 73... ORDERING preferred on request on request on request on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 29 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 URdc = 2000 V; URac = 600 V/Up-p = 1700 V (monitor type) CATALOGUE NUMBER(1) C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 5.0 1.0 mm C-tol = 5% Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.001 0.0011 0.0012 0.0013 0.0015 0.0016 0.0018 6.0 x 19.0 x 26.0 2222 375 74102 2.1 2222 375 74112 2222 375 74122 6.5 x 19.5 x 26.0 2.3 7.0 x 20.0 x 26.0 2.6 7.5 x 20.5 x 26.0 2.8 2222 375 74182 r o t 2222 375 74132 2222 375 74152 2222 375 74162 0.002 8.0 x 21.0 x 26.0 3.0 2222 375 74202 0.0022 8.5 x 21.5 x 26.0 3.3 2222 375 74222 0.0024 9.0 x 22.0 x 26.0 3.6 2222 375 74242 0.0027 9.5 x 22.5 x 26.0 3.8 2222 375 74272 10.0 x 23.0 x 26.0 4.2 2222 375 74302 10.5 x 23.5 x 26.0 4.5 2222 375 74332 0.003 0.0033 i n o M 0.0036 0.0039 2222 375 74362 11.0 x 24.0 x 26.0 4.9 2222 375 74392 0.0043 0.0047 0.0051 2222 375 74432 11.5 x 24.5 x 26.0 2222 375 74472 5.3 2222 375 74512 Pitch = 27.5 0.5 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.0056 11.0 x 24.0 x 30.0 5.1 2222 375 74562 0.0062 11.5 x 24.5 x 30.0 5.6 2222 375 74622 0.0068 12.0 x 25.0 x 30.0 5.8 2222 375 74682 0.0075 12.5 x 25.5 x 30.0 6.1 2222 375 74752 0.0082 13.0 x 26.0 x 30.0 6.5 2222 375 74822 0.0091 14.0 x 27.0 x 30.0 on 7.0 2222 375 74912 0.01 14.5 x 27.5 x 30.0 7.5 2222 375 74103 15.5 x 29.5 x 30.0 8.1 0.011 0.012 0.013 r o it M 2222 375 74113 2222 375 74123 2222 375 74133 0.015 2222 375 74153 Note 1. The shading indicates preferred types. 1999 Apr 29 30 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 KP/MKP 375 GENERAL DATA 144x12(halfpage) PITCH 22.5 (bent back leads)/27.5 mm l b 144x12(halfpage) seating plane (1) l b seating plane (1) h h (2) (2) lt P lt Odt A P (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. Odt A CBA632 CBA628 (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. Fig.17 Outline for pitch = 22.5 mm (bent back leads). Fig.18 Outline for pitch = 27.5 mm. Specific reference data for the 2500 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: P = 22.5 mm P = 27.5 mm Rated voltage pulse slope (dU/dt)R at 2500 V (DC) R between leads at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz at 100 kHz 6 x 10-4 6 x 10-4 10 x 10-4 10 x 10-4 18000 V/s >100000 M >100000 M >900 V 3500 V; 1 minute 2840 V; 1 minute Available 2500 V DC versions PACKAGING(1) DIMENSIONS C-tol 5% 3.5% 5% 3.5% 5% 3.5% lt = 5.0 1.0 mm Loose in box lt = 3.5 0.5 mm Taped on reel H = 16.0 mm; P0 = 12.7 mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 375 91... 2222 375 91... 2222 375 91... 2222 375 91... 2222 375 ..... 2222 375 ..... ORDERING on request on request on request on request on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 31 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 URdc = 2500 V; URac = 880 V/Up-p = 2500 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX; lt = 3.5 0.5 mm MASS (g) P = 27.5 0.4 mm P = 22.5 0.4 mm(1) C-tol = 5% catalogue number last 5 digits 0.001 2222 375 91001 .. 91003 0.0011 2222 375 91005 .. 91007 0.0012 2222 375 91011 .. 91013 dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.0013 7.0 x 20.0 x 30.0 2222 375 91015 .. 91017 0.0015 2222 375 91021 .. 91023 0.0016 2222 375 91025 .. 91027 2.9 0.0018 0.0020 7.5 x 20.5 x 30.0 2.9 0.0022 0.0024 8.0 x 21.0 x 30.0 3.2 0.0025 0.0027 8.5 x 21.5 x 30.0 3.5 2222 375 91031 .. 91033 2222 375 91035 .. 91037 2222 375 91041 .. 91043 2222 375 91045 .. 91047 2222 375 91051 .. 91053 2222 375 91055 .. 91057 0.0030 9.0 x 22.0 x 30.0 3.8 2222 375 91061 .. 91063 0.0033 9.5 x 22.5 x 30.0 4.0 2222 375 91065 .. 91067 0.0036 10.0 x 23.0 x 30.0 4.3 2222 375 91071 .. 91073 0.0039 10.5 x 23.5 x 30.0 4.6 2222 375 91075 .. 91077 0.0043 11.0 x 24.0 x 30.0 5.0 2222 375 91081 .. 91083 0.0047 11.5 x 24.5 x 30.0 5.3 2222 375 91085 .. 91087 0.0051 12.0 x 25.0 x 30.0 5.7 2222 375 91091 .. 91093 0.0056 12.5 x 25.5 x 30.0 6.1 2222 375 91095 .. 91097 0.0062 13.5 x 26.5 x 30.0 6.6 2222 375 91101 .. 91103 0.0068 14.0 x 27.5 x 30.0 7.2 2222 375 91105 .. 91107 Note 1. Only for bent back leads. 1999 Apr 29 32 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 KP/MKP 375 GENERAL DATA PITCH 22.5/27.5 mm b l handbook, full pagewidth h seating plane(1) (2) lt P dt A CBA070 (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. Fig.19 Outline. Specific reference data for the 2500 V DC capacitors (monitor type) VALUE DESCRIPTION Tangent of loss angle: P = 22.5 mm P = 27.5 mm Rated voltage pulse slope (dU/dt)R at 2500 V (DC) R between leads at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz at 100 kHz 6 x 10-4 6 x 10-4 10 x 10-4 15 x 10-4 18000 V/s >100000 M >100000 M >900 V 3500 V; 1 minute 2840 V; 1 minute Available 2500 V DC versions (monitor type) PACKAGING(1) DIMENSIONS C-tol 5% 3.5% 5% 3.5% 5% 3.5% lt = 5.0 1.0 mm Loose in box lt = 3.5 0.5 mm Taped on reel H = 16.0 mm; P0 = 12.7 mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 375 84... 2222 375 85... 2222 375 80... 2222 375 81... 2222 375 82... 2222 375 83... ORDERING preferred on request on request on request on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 33 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 URdc = 2500 V; URac = 600 V/Up-p = 1700 V (monitor type) CATALOGUE NUMBER(1) C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 5.0 1.0 mm C-tol = 5% Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.001 0.0011 0.0012 0.0013 0.0015 0.0016 0.0018 0.002 0.0022 0.0024 0.0027 7.0 x 20.0 x 26.0 2222 375 84102 2.6 2222 375 84112 2222 375 84122 7.5 x 20.5 x 26.0 2.8 8.5 x 21.5 x 26.0 3.3 9.0 x 22.0 x 26.0 3.6 2222 375 84182 r o it 2222 375 84132 2222 375 84152 on 9.5 x 22.5 x 26.0 3.8 2222 375 84202 10.0 x 23.0 x 26.0 4.1 2222 375 84222 10.5 x 23.5 x 26.0 4.5 2222 375 84242 11.0 x 24.0 x 26.0 4.9 2222 375 84272 M 2222 375 84162 Pitch = 27.5 0.5 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.003 11.0 x 24.0 x 30.0 5.1 2222 375 84302 0.0033 11.5 x 24.5 x 30.0 5.4 2222 375 84332 0.0036 12.0 x 25.0 x 30.0 5.8 2222 375 84362 0.0039 12.5 x 25.5 x 30.0 6.1 2222 375 84392 0.0043 13.0 x 26.0 x 30.0 6.5 2222 375 84432 0.0047 13.5 x 26.5 x 30.0 6.9 2222 375 84472 14.0 x 27.0 x 30.0 7.3 2222 375 84512 15.0 x 29.0 x 30.0 7.8 2222 375 84562 0.0051 0.0056 0.0062 0.0068 0.0075 r o t ni o M 15.5 x 29.5 x 30.0 2222 375 84622 2222 375 84682 8.2 2222 375 84752 0.0082 2222 375 84822 0.0091 2222 375 84912 Note 1. The shading indicates preferred types. 1999 Apr 29 34 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 CONSTRUCTION Mounting Description NORMAL USE * Series-constructed, impregnated polypropylene film, aluminium foil and metallized internal electrode The capacitors are designed for printed-circuit boards applications. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to this handbook, chapter "Packaging information". * Protected by a hard, water-repellent, solvent-resistant epoxy lacquer * Radial leads, solder-coated: - Copper clad steel wire for original pitch = 10 mm - Copper wire for original pitch = 15, 22.5 and 27.5 mm. SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK * For pitches of 15 mm capacitors shall be mechanically fixed by the leads. FOR KP/MKP 630 V - 2000 V AND 2500 V (MONITOR TYPE) * For larger pitches the capacitors shall be mounted in the same way and the body clamped. metal spray layer 144x12(halfpage) aluminium foil Storage temperature * Storage temperature: Tstg = -25 to +40 C with RH maximum 80% without condensation. RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified, all electrical values apply to an ambient free air temperature of 23 1 C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 2%. polypropylene film metallized polypropylene film For reference testing, a conditioning period shall be applied over 96 4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%. connecting wire KP/MKP CBA282 Fig.20 Construction. FOR KP/MKP 2500 V (2222 375 91...) Aluminium foil 144x12(halfpage) polypropylene film MKP metallized polypropylene film metal spray layer connecting wire CBA283 Fig.21 Construction. 1999 Apr 29 35 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 CHARACTERISTICS Capacitance CBA829 296x12(full_width) 8 C/C (%) 4 max. 0 typical -4 min. -8 -50 0 50 100 Tamb (C) Fig.22 Capacitance change as a function of ambient temperature. Impedance CBA285 296x12(full_width) 10 3 1.5 Impedance () 10 1 ; 16 3.9 12 10 2 nF 33 00200 ; 10 0-2 00V 500 nF nF ;1 V 00 nF ;6 30 47 V n 10 F; 1 0n 00 0V F; 63 0V 0V 10 0 10 -1 10 -2 10 4 10 5 10 6 10 7 10 8 Fig.23 Impedance as a function of frequency: typical curves. 1999 Apr 29 36 f (Hz) 10 9 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 Maximum DC voltage as a function of temperature CBA748 1.2 handbook, full pagewidth factor 1.0 0.8 0.6 0.4 0.2 0 -60 -40 -20 0 20 40 60 80 100 120 Tamb (C) Fig.24 Multiplying factor as a function of temperature. 1999 Apr 29 37 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 Maximum RMS voltage (sinewave) as a function of frequency CBA286 296x12(full_width) 10 3 KP/MKP 375 AC Voltage (V) 10 2 nF 0 1. nF F 2 2. .7 n 4 nF 10 nF 22 7 nF 4 nF 0 F 10 0 n 22 10 1 10 3 10 4 10 5 10 6 10 7 10 8 f (Hz) Fig.25 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 630 V. CBA830 296x12(full_width) 10 3 KP/MKP 375 AC Voltage (V) 10 2 nF 0 F 1. n 2 2. 7 nF 4. nF 10 F n 22 7 nF 4 nF 0 10 0 nF 22 10 1 10 3 10 4 10 5 10 6 10 7 f (Hz) 10 8 Fig.26 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 630 V. 1999 Apr 29 38 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 CBA287 296x12(full_width) 10 3 KP/MKP 375 AC Voltage (V) 10 2 pF 0 pF 10 0 22 pF 0 47 nF 0 1. nF 2 2. nF 7 4. nF 22 nF 47 nF 0 10 10 1 10 3 10 4 10 5 10 6 10 7 10 8 f (Hz) Fig.27 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 1000 V. CBA831 296x12(full_width) 10 3 KP/MKP 375 AC Voltage (V) 10 2 pF 0 pF 10 0 22 pF 0 F 47 n 0 1. nF 2 2. nF 7 4. nF 22 nF 47 nF 0 10 10 1 10 3 10 4 10 5 10 6 10 7 f (Hz) 10 8 Fig.28 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 1000 V. 1999 Apr 29 39 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 CBA288 296x12(full_width) 10 3 KP/MKP 375 AC Voltage (V) 10 2 nF 0 1. 2 nF F 2. 7 n F 4. 0 n F 1 n 22 10 1 10 3 10 4 10 5 10 6 10 7 10 8 f (Hz) Fig.29 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 1600 V. CBA832 296x12(full_width) 10 3 KP/MKP 375 AC Voltage (V) 10 2 nF 0 1. 2 nF F 2. 7 n 4. 0 nF F 1 2n 2 10 1 10 3 10 4 10 5 10 6 10 7 f (Hz) 10 8 Fig.30 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 1600 V. 1999 Apr 29 40 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 CBA940 296x12(full_width) 10 3 KP/MKP 375 AC Voltage (V) 10 2 nF 0 F 1. .2 n 2 nF 10 7 4. nF 22 nF 47 nF 10 1 10 3 10 4 10 5 10 6 10 7 f (Hz) 10 8 Fig.31 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 1600 V (monitor type). CBA941 103 handbook, full pagewidth KP/MKP 375 AC voltage (V) 102 nF 0 1. 2 nF 2. nF 7 4. 10 nF 22 nF 47 nF 10 103 104 105 106 107 f (Hz) 108 Fig.32 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 1600 V (monitor type). 1999 Apr 29 41 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 CBA289 296x12(full_width) 10 3 KP/MKP 375 AC Voltage (V) 10 2 pF 0 10 pF 0 F 22 0 p F 47 .0 n nF 1 2 2. 7 nF 4. 0 nF 1 10 1 10 3 10 4 10 5 10 6 10 7 10 8 f (Hz) Fig.33 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 2000 V. CBA833 296x12(full_width) 10 3 KP/MKP 375 AC Voltage (V) 10 2 pF 0 10 pF 0 F 22 0 p F 47 .0 n F 1 2n 2. 7 nF 4. nF 10 10 1 10 3 10 4 10 5 10 6 10 7 f (Hz) 10 8 Fig.34 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 2000 V. 1999 Apr 29 42 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 CBA942 296x12(full_width) 10 3 KP/MKP 375 AC Voltage (V) 10 2 nF 0 1. nF 2 2. nF 7 4. nF 10 nF 15 10 1 10 3 10 4 10 5 10 6 10 7 10 8 f (Hz) Fig.35 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 2000 V (monitor type). CBA943 296x12(full_width) 10 3 KP/MKP 375 AC Voltage (V) 10 2 0 1. 2 10 5 nF nF 7 nF 10 nF 15 10 4 nF 2. 4. 10 1 10 3 10 6 10 7 f (Hz) 10 8 Fig.36 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 2000 V (monitor type). 1999 Apr 29 43 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 CBA290 296x12(full_width) 10 3 KP/MKP 375 AC Voltage (V) 10 2 nF 0 F 1. n 2 2. 7 nF 4. 10 1 10 3 10 4 10 5 10 6 10 7 10 8 f (Hz) Fig.37 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 2500 V. CBA834 296x12(full_width) 10 3 KP/MKP 375 AC Voltage (V) 10 2 nF 0 1. 2 nF 2. 7 nF 4. 10 1 10 3 10 4 10 5 10 6 10 7 f (Hz) 10 8 Fig.38 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 2500 V. 1999 Apr 29 44 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 CBA944 296x12(full_width) 10 3 KP/MKP 375 AC Voltage (V) 10 2 0 1. 2 nF 2. nF 10 nF 7 4. nF 10 1 10 3 10 4 10 5 10 6 10 7 10 8 f (Hz) Fig.39 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 2500 V (monitor type). CBA945 296x12(full_width) 10 3 KP/MKP 375 AC Voltage (V) 10 2 0 1. nF 2 2. nF 10 nF 7 4. nF 10 1 10 3 10 4 10 5 10 6 10 7 f (Hz) 10 8 Fig.40 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 2500 V (monitor type). Maximum RMS current (sinewave) as a function of frequency The maximum RMS current is defined by I ac = x C x U ac . Uac is the maximum AC voltage depending on the ambient temperature in Figs 25 to 40. 1999 Apr 29 45 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 Tangent of loss angle CBA958 296x12(full_width) 102 dissipation factor (x 10-4) 1. KP/MKP 2. KP/MKP 3. KP/MKP (3) 10.0 and 15.0 mm pitch all versions 22.5 mm pitch, 1000, 1600, 2000 and 2500V versions 22.5 mm pitch, 630V versions 27.5 mm pitch 630, 1000, 1600 and 2000V versions 27.5 mm pitch, 630V versions (2) (1) 101 100 10 2 10 3 10 4 10 5 10 6 frequency (Hz) Fig.41 Tangent of loss angle as a function of frequency: typical curves. CBA959 296x12(full_width) 102 1. KP/MKP dissipation factor (x 10-4) 2. KP/MKP 3. KP/MKP (3) 10.0 and 15.0 mm pitch all versions 22.5 mm pitch, 1000, 1600, 2000 and 2500V versions 22.5 mm pitch, 630V versions 27.5 mm pitch 630, 1000, 1600, 2000 and 2500V versions 27.5 mm pitch, 630V versions (2) (1) 101 100 10 2 10 3 10 4 10 5 frequency (Hz) Fig.42 Tangent of loss angle as a function of frequency: maximum curves. 1999 Apr 29 46 10 6 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 Insulation resistance CBA647 106 handbook, full pagewidth RC (s) 105 104 0 20 40 60 80 100 120 Tamb (C) Fig.43 RC product as a function of ambient free air temperature; typical curve. Maximum allowed component temperature rise (T) as a function of the ambient temperature (Tamb) CBA757 12 handbook, full pagewidth T (C) 10 8 6 4 2 0 -60 -40 -20 0 20 40 60 80 100 120 Tamb (C) Fig.44 Maximum allowed component temperature rise as a function of the ambient temperature. 1999 Apr 29 47 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 Heat conductivity (G) as a function of pitch and capacitor body thickness in mW/C Table 1 Heat conductivity ORIGINAL PITCH (mm) bmax (mm) 10 15 22.5 27.5 4.0 4.0 5.0 - - 4.5 4.5 6.0 - - 5.0 5.0 6.0 12.0 13.0 5.5 6.0 6.5 13.0 15.0 6.0 6.0 6.5 13.0 15.0 6.5 6.5 8.0 15.0 17.0 7.0 - 8.0 15.0 17.0 7.5 - 9.0 17.0 18.0 8.0 - 9.0 17.0 20.0 8.5 - 11.0 18.0 20.0 9.0 - 11.0 18.0 22.0 9.5 - 12.0 20.0 22.0 10.0 - 12.0 20.0 23.0 10.5 - - 22.0 25.0 11.0 - - - 25.0 11.5 - - - 27.0 12.0 - - - 27.0 12.5 - - - 30.0 13.0 - - - 30.0 13.5 - - - 30.0 14.0 - - - 30.0 14.5 - - - 33.0 15.0 - - - 33.0 15.5 - - - 37.0 16.0 - - - 37.0 Power dissipation and maximum component temperature rise The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. Power dissipation can be calculated in accordance with chapter "Introduction", section "Maximum power dissipation". The component temperature rise (T) can be measured (see section "Measuring the component temperature" for more details) or calculated by T = P G : * T = component temperature rise (C). * P = power dissipation of the component (mW). * G = heat conductivity of the component (mW/C). 1999 Apr 29 48 BC Components Product specification AC and pulse metallized polypropylene film capacitors Measuring the component temperature A thermocouple must be attached to the capacitor body; see Fig.45. handbook, halfpage thermocouple CBA771 Fig.45 Mounting the thermocouple. The temperature is measured in unloaded (Tamb) and maximum loaded condition (Tc). The temperature rise is given by: T = T c - T amb . To avoid radiation or convection, the capacitor should be tested in a wind-free box. 1999 Apr 29 49 KP/MKP 375 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 Application note and limiting conditions To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc). 2. The peak-to-peak voltage (Up-p) shall not be greater than the maximum Up-p to avoid the ionisation inception level. 3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URdc and divided by the applied voltage. For all other pulses following equation must be fulfilled: T dU dU 2 2 x -------- x dt < U Rdc x -------- dt rated dt 0 T is the pulse duration. 4. The maximum component surface temperature rise must be lower than the limits in Fig.44. Example C = 10 nF - 1600 V, KP/MKP. This is a signal as in Fig.46 with: Up-p = 1200 V; Up = 1100 V; T1 = 12 s; T2 = 64 s. The ambient temperature is 50 C. Checking the conditions: 1. The peak voltage Up = 1100 V is lower than 1600 V (DC). 2. The peak-to-peak voltage 1200 V is lower than 2 x 2 x 500 V (AC) = 1414 U p - p . 3. The voltage pulse slope: 320 V/s is much lower than 7000 V/s. 4. The dissipated power is 170 mW as calculated with Fourier terms. 170 mW This gives a temperature rise of ------------------------------- = 10 C which is allowed according Fig.44 for an ambient temperature 17 mW C of 50 C. 296x12(full_width) voltage Up Up-p time T1 CBA295 T2 Fig.46 Voltage signal. 1999 Apr 29 50 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 MARKING Product marking COUNTRY OF ORIGIN: BELGIUM The capacitors are marked on the top (see Fig.47) with the following information: 144x12(halfpage) 2n2 J 1700Vp-p 375 KP/MKP F8 1. Capacitance code in accordance with "IEC 60062" 2. Capacitance tolerance: J = 5%; A = 3.5% CBA296 3. Rated peak-to-peak voltage (e.g. 1700 Vp-p) 4. Manufacturer's type designation (375) 5. Code for dielectric material (KP/MKP) 6. Manufacturer's emblem (only for original pitch 15 mm) 7. Year and month of manufacturing code (only for original pitch 22.5 mm). Fig.47 Example of marking. COUNTRY OF ORIGIN: PRC (PEOPLE'S REPUBLIC OF CHINA) The capacitors are marked in ink on the front (see Fig.48) with the following information: handbook, halfpage 1. Capacitance code in accordance with "IEC 60062" 2. Capacitance tolerance: J = 5%; A = 3.5% 2n2 J 2000V 375 KP/MKP 9910 3. Rated (DC) voltage (e.g. 2000 V) 4. Manufacturer's type designation (375) 5. Code for dielectric material (KP/MKP) 6. Year and week of manufacturing code. CBA446 Fig.48 Example of marking. 1999 Apr 29 51 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 Package marking The package containing the capacitors is marked as shown in Fig.49. Please note: In due time BC COMPONENTS will replace PHILIPS COMPONENTS Barcode label marking handbook, full pagewidth 1. 2. LINE MARKING EXPLANATION 3. 1 Manufacturer's name 4. 2 Country of origin 5. 3 Sub-family 6. 4 Type description 5 Capacitance value in mF, tolerance, voltage and climatic category ("IEC 60068-1") 6 Batchnumber (only for capacitors from PRC) 7 * Country of origin: Belgium Preference origin code: A Country of origin in code: 170 (Belgium) Responsible production centre: HQ Work order: WO 7. 8. * Country of origin: China Preference origin code: N Country of origin in code: 260 (PRC) Responsible production centre: 07 9. 10. 8 Product type description 9 Quantity and production period, year and week code 10 Product code (12NC) CCA427 Fig.49 Barcode label. 1999 Apr 29 52 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 QUICK REFERENCE TEST REQUIREMENTS (see note 1) TEST PROCEDURE (quick reference) REQUIREMENTS Robustness of leads Tensile strength: "IEC 60068-2-21" load 10 N; 10 s Bending: "IEC 60068-2-21" load 5 N; 4 x 90 Resistance to soldering heat: "IEC 60068-2-20" solder bath: 260 C; 10 s Component solvent resistance isopropyl alcohol; 23 C; 5 minutes no visible damage legible marking C/C 1% +5 pF tan 5 x 10-4 Robustness of component Vibration: "IEC 60068-2-6" 10 to 55 Hz; amplitude 0.75 mm or acceleration 98 m/s2; 6 hours Shock: "IEC 60068-2-27" half sinewave; 490 m/s2; 11 ms C/C 2% (C > 0.0056 F) C/C 3% + 5 pF (C 0.0056 F) tan 5 x 10-4 Climatic sequence Dry heat: "IEC 60068-2-2" 16 hours; 105 C Damp heat, cyclic, test Db, first cycle: "IEC 60068-2-30" Cold: "IEC 60068-2-1" C/C 3% + 5 pF tan 10 x 10-4 2 hours; -55 C Rins 50% of specified value Damp heat, cyclic, test Db, remaining cycles: "IEC 60068-2-30" Other applicable tests Damp heat, steady state: "IEC 60068-2-3" 56 days; 40 C; 90 to 95% RH C/C 1% + 5 pF tan 5 x 10-4 Rins 50% of specified value Endurance (AC): "IEC 60384-17" 2000 hours; 1.25 x URac (RMS); 50 Hz; 85C C/C 2% (C > 0.0056 F) C/C 3% + 5 pF (C 0.0056 F) tan 10 x 10-4 Rins 50% of specified value 2000 hours; 0.875 x URac (RMS); 50 Hz; 105C C/C 5% + 5 pF tan 10 x 10-4 Rins 50% of specified value Heat storage: "IEC 60384-17" 2000 hours; 105 C C/C 3% (C > 0.0056 F) C/C 5% + 5 pF (C 0.0056 F) tan 10 x 10-4 1999 Apr 29 53 BC Components Product specification AC and pulse metallized polypropylene film capacitors KP/MKP 375 PROCEDURE (quick reference) TEST REQUIREMENTS Resistance to soldering heat with preheating: "IEC 60384-17" body temperature: 105 C; bath temperature: 260 C; dwell time: 10 s C/C 2% + 5 pF Passive flammability: "IEC 60384-1" class C no burning Endurance (DC): "IEC 60384-17" 2000 hours: 1.25 x URdc; 85 C 0.875 x URdc; 105 C C/C 3% + 5 pF tan 5 x 10-4 tan 10 x 10-4 Rins 50% of specified value Note 1. For detailed information: see "Type detail specification HQN-384-17/104". 1999 Apr 29 54