Solid-State Timer H3G Low-Cost, Plug-In Timer with Large Switching Capacity Up to 7-amp switching capacity Choose SPDT or DPDT contact form 12 time ranges Fits standard 8-pin sockets Ideal replacement for time relays Subminature DIN size, 36 x 36 mm LED power-ON indicator Timer hold-down clips supplied Panel mounting adapter, sockets, and accessories may be ordered seperately Ordering Information TIMERS Add the supply voltage and time range code to the part number when you order. For example, H3G-8A AC100/110/120-60s. Timing function Contact type Time limit Instanttaneous Terminal form Part number Supply voltages AC DC Time range codes ON-delay SPDT DPDT - - 8-pin round socket H3G-8A H3G-8C 24 V,100/110/120 V or 200/220/240 V; 50/60 Hz 12 V or 24 V 1 s, 3 s, 5 s, 10 s, 30 s, 60 s, 3 m, 5 m, 10 m, 30 m, 60 m, or 3 h TIME RANGES Code 1s 3s 5s 10 s Range 0.1 to 1 second 0.3 to 3 seconds 0.5 to 5 seconds 1 to 10 seconds Code 30 s 60 s 3m 5m Range 3 to 30 seconds 6 to 60 seconds 0.3 to 3 minutes 0.5 to 5 minutes Code 10m 30 m 60 m 3h Range 1 to 10 minutes 3 to 30 minutes 6 to 60 minutes 0.3 to 3 hours ACCESSORIES Description Sockets 8-pin, bottom surface or track mounting, top screw terminals, molded standoff ring Part number PF083A-E 8-pin, bottom surface or track mounting, top screw terminals PF085A 8-pin, back mounting, for use with Y92F-30 mounting adapter, bottom screw terminals 8-pin, terminal cover for P3G sockets, conforms to VDE0106/P100 Panel mounting adapter Fits behind panel, ideal for side-by-side installation. Use P3G- sockets Mounting track DIN rail, 50 cm (1.64 ft) length; 7.3 mm thick DIN rail, 1 m (3.28 ft) length; 7.3 mm thick DIN rail, 1 m (3.28 ft) length; 16 mm thick End plate Spacer P3G-08 Y92A-48G Y92F-31 PFP-50N PFP-100N PFP-100N2 PFP-M PFP-S H3G H3G REPLACEMENT PARTS Description Timer hold-down clips, one pair Part number Y92H-6 Specifications Part number Supply voltage H3G-8A H3G-8C 24 V, 100/110/120 V or 200/220/240 V; 50/60 Hz 12 V or 24 V Operating voltage 85 to 110% of rated voltage AC 3.4 VA at 200 VAC Power consumption DC - Timing functions ON-delay Control inputs - - Control Type Time limit SPDT DPDT output Instantaneous - - Max. load 7 A, 125/250 VAC (resistive lead) 5 A, 125/250 VAC (resistive lead) Min. load 100 mA, 5 VDC 100 mA, 5 VDC Repeat accuracy 2% max. Setting error 10% max. Resetting system Power-off Resetting time 100 ms Indicators Power ON (red LED) Materials Plastic case, knob Mounting Panel, track or surface Connections 8-pin round socket Weight 55 g (2.0 oz.) Approvals UL/CSA, SEV Operating ambient temperature -10 to 55C (14 to 131F) Humidity 35 to 85% RH Vibration Mechanical durability 10 to 55 Hz; 0.75 mm (0.03 in) double amplitude Malfunction durability 10 to 55 Hz; 0.5 mm (0.02 in) double amplitude Shock Mechanical durability 100 G Malfunction durability 10 G Variation due to voltage change 2% max. Variation due to temperature change 5% max. Insulation resistance 100 M min. at 500 VDC Dielectric strength 2,000 VAC, 50/60 Hz for 1 minute between current-carrying and non-current-carrying parts, and between contact carrying and control circuit and between contacts of different poles. 1,000 VAC, 50/60 Hz for 1 minute between non-continuos contacts Service life Mechanical 10 million operations min. Electrical 100,000 operations min. at maximum ratings AC DC 2 H3G H3G Engineering Data Service Life (x 103) Service Life (x 103) ELECTRICAL SERVICE LIFE Contact current (A) Contact current (A) Timing Charts In the schematic diagrams, each thick line indicates the external wiring. H3G-8C H3G-8A Power 2-7 ON OFF Power 2-7 ON OFF Control output NO 6-8 ON OFF Control output 1-3 6-8 ON OFF -8 Control output NC 5-8 ON OFF Power ON indicator ON OFF Control output NC Power ON indicator Rt = reset time 1-4 5-8 ON OFF ON OFF Rt = reset time 3 H3G H3G Dimensions Unit: mm (inch) TIMERS H3G-8A, H3G-8C 81.2 (3.20) (1.42) (2.36) 36 (1.42) (1.29) ACCESSORIES PF083A-E Bottom Surface or Track Mounting Socket with Molded Standoff Ring Terminal arrangement Eight M3.57 sems Two 4.5 dia. holes 52 max. (2.05) Mounting holes Two M4 or 4.5 dia. socket mounting holes 35.4 (1.39) (1.30) 41 max. (1.61) (Top view) 21 max. (0.83) PF085A Bottom Surface on Track Mounting Socket Eight M3.5 7 sems Terminal arrangement Two 4.5 dia. holes 58 max. (2.28) Mounting holes Two M4 or 4.5 dia. holes 35.4 (1.39) (1.30) (Top view) 40 max. (1.57) 21.6 max. (0.85) P3G-08 Back Mounting Socket Terminal arrangement (1.77) (1.77) (Bottom view) (0.69) 4 H3G H3G Y92A-48G Finger Safe Terminal for P3G(A) Conforming to VDE0106/P100 Twelve, 6.4 dia. holes 47.7 x 4.47 34 48 x 48 16.5 27.6 47.4 Y92F-31 Mounting Adapter Adapter installs behind the panel. It is ideal for side by side installation. Use P3G-08 socket. (0.61) Panel cutout Y92F-31 Adapter 0.5R max. 46 (1.81) +0.5 4533 -0 (1.30) (1.73) 33 (1.30) 37.4 (1.47) Note: Recommended panel thickness is 1 to 5 mm. 82.7 (3.26) PFP-100N, PFP-50N Mounting Track PFP-100N2 Mounting Track 16 (0.63) 7.30.15 4.5 (0.18) 4.5 (0.18) 350.3 15 25 25 10 15 25 25 10 L 350.3 27 270.15 25 25 10 1 (0.04) 25 L 25 24 1 (0.04) 15 10 L: Length 1m PFP-100N 50 cm PFP-50N 1m PFP-100N2 PFP-M End Plate PFP-S Spacer 10 (0.39) 6.2 (0.24) 1.8 (0.07) 1 50 (1.97) 11.5 (0.45) 1.8 M4 x 8 pan head 10 screw (10.39) 16 (0.63) 5 (0.20) 35.5 35.3 (1.39) 12 34.8 (1.37) 44 (1.74) 1.3 (0.05) 4.8 (0.19) 16.5 (0.65) 5 29.2 (1.15) 1.5 (0.06) H3G H3G Y92H-6 Hold-Down Clips One pair of clips are packed with the H3G timer. (.24) (2.60) (2.81) Connections Part number H3G-8A H3G-8C Power supply terminal numbers AC (common), DCAC (hot), DC+ 2 7 2 7 Output terminal numbers COM NC 8 5 1 4 NO 6 3 Mounting PANEL MOUNTING Insert the timer through the panel cutout. Push the Y92F-31 adapter from the rear of the timer as far forward toward the panel as possible. Using Y92F-31 Adapter Push the P3G-08 onto the rear of the timer, then wire the socket. Tighten the two retaining screws on the adapter. To release the adapter, lift the tab at the rear of the adapter. TRACK MOUNTING PF083A-E and PF085A PF083A-E PF085A Mounting Insert the timer into the socket then clip the rear of the socket onto the track. Push the bottom onto the track until the latch fastens securely. (3.65) (3.63) Removal Pull the latch on the socket with a flat-blade screwdriver and remove the timer and socket as one unit. NOTE: DIMENSIONS ARE SHOWN IN MILLIMETERS. To convert millimeters to inches divide by 25.4. OMRON ELECTRONICS LLC OMRON ON-LINE OMRON CANADA, INC. One East Commerce Drive Schaumburg, IL 60173 Global - http://www.omron.com USA - http://www.omron.com/oei Canada - http://www.omron.com/oci 885 Milner Avenue Scarborough, Ontario M1B 5V8 1-800-55-OMRON Cat. No. GC TMCN1 3/02 Specifications subject to change without notice. 6 416-286-6465 Printed in the U.S.A.