DUST CHOKE COILS
CAT. No. E1008G
?MAJOR USES
@Output choke coils for Switching Mode Power Supply
@Choke coils for Power Factor Corrective circuit
?FEATURES
@Excellent characteristics in frequency and temperature
@Smaller than ferrite products; by the feature of higher saturation
magnetic flux density and better D.C. bias characteristics
Sendust (Fe-Si-Al)
(1/4)
*1 Rated inductance tolerance ; P20%, the inductance at current 0[A] indicates the reference value.
*2 The number of turns indicates the reference value.
The specification of the inductance takes precedence over that of the number of turns.
*3 Correspondence with the core case is possible. (PET:UL94V-0 155C)
There is a horizontal putting type in all items in the above list.
'V' changes into "H" in last the third digit of the name of items.
There is a type with the length putting seat in @ item in the above list. "D" in last the third digit of the name of items.
There is a type with the length putting seat in item in the above list.
"V" changes into "D" in last the third digit of the name of items.
*Order the auxiliary pins separately if they are required for the pedestal.
Please select them according to the situation.
LHDM001161ANDV0E
LHDM002550ANDV0E
LHDM003230ANDV0E
LHDM001451AQDV0E
LHDM002141AQDV0E
LHDM003800AQDV0E
LHDM005300AQDV0E
LHDM001801ARDV0E
LHDM002331ARDV0E
LHDM003101ARDV0E
LHDM005550ARDV0E
LHDM003251AUGV0E
LHDM005161AUGV0E
LHDM010300AUGV0E
LHDM002951AUDV0E
*3
LHDM003231AUDV0E *3
LHDM005141AUDV0E *3
LHDM010330AUDV0E *3
LHDM005571AZDV0E *3
LHDM010151AZDV0E *3
LHDM020200AZDV0E *3
1
2
3
1
2
3
5
1
2
3
5
3
5
10
2
3
5
10
5
10
20
200
74
30
590
190
120
46
1100
550
140
95
360
310
48
1500
300
210
48
800
220
26
160
55
23
450
135
80
30
800
330
100
55
250
160
30
950
230
140
33
570
150
20
145
46
28
260
78
48
23
400
150
58
32
90
55
14
260
90
50
12
95
28
6
17.5
18.0
18.0
22.5
22.5
23.0
23.5
25.5
26.0
26.0
26.5
32.5
33.5
34.0
32.5
32.5
33.0
35.0
52.5
55.0
55.0
18.5
19.0
19.0
23.5
23.5
24.0
24.5
26.5
27.0
27.0
27.0
33.0
34.0
34.5
33.5
33.5
34.0
36.0
53.0
56.0
56.0
11.0
11.5
11.5
12.5
12.5
13.5
14.5
12.5
14.0
14.0
14.5
14.0
15.0
16.0
18.5
18.5
19.0
20.5
26.5
28.0
28.5
0.5F
B1P-69T
0.7F
B1P-42T
0.8F
B1P-27T
0.5F
B1P-96T
0.7F
B1P-54T
0.8F
B1P-43T
1.0F
B1P-27T
0.5F
B1P-146T
0.7F
B1P-103T
0.8F
B1P-52T
1.0F
B1P-43T
0.8F
B1P-68T
1.0F
B1P-63T
1.1F
B2P-25T
0.7F
B1P-113T
0.8F
B1P-50T
1.0F
B1P-42T
1.6F
B1P-20T
1.1F
B1P-61T
1.6F
B1P-32T
1.8F
B2P-11T
Inductance (100kHz)
Rated
Current
A
0[A]
mHRating
mH
D.C.R.
mo
(max)
Winding
mmfblines-turns
Outside Dimensions
D1
mm W
mm
D2
mm
*1 *2
Coil Part No.
?COIL STANDARD SPECIFICATIONS
RoHS
Compliant
DUST CHOKE COILS
CAT. No. E1008G(2/4)
1
10
100
1000
10000
LHDM002951AUDV0E
LHDM002331ARDV0E
LHDM002141AQDV0E
LHDM002550ANDV0E
D.C Current I [A]
Inductance L [MH]
0123456
1
10
100
1000
LHDM003231AUDV0E
LHDM003251AUGV0E
LHDM003101ARDV0E
LHDM003800AQDV0E
LHDM003230ANDV0E
02468
D.C Current I [A]
Inductance L [MH]
?D.C. BIAS CHARACTERISTICS (4)
@Rated Current : 5[A], Frequency : 100[kHz]
1
10
100
1000
LHDM005571AZDV0E
LHDM005141AUDV0E
LHDM005550ARDV0E
LHDM005300AQDV0E
LHDM005161AUGV0E
D.C Current I [A]
Inductance L [MH]
0 5 10 15
1
10
100
1000
10000
LHDM001801ARDV0E
LHDM001451AQDV0E
LHDM001161ANDV0E
01234
D.C Current I [A]
Inductance L [MH]
?D.C. BIAS CHARACTERISTICS (5)
@Rated Current : 10, 20[A], Frequency : 100[kHz]
1
10
100
1000
LHDM010330AUDV0E
LHDM010151AZDV0E
LHDM020200AZDV0E
LHDM010300AUGV0E
0 10203040
D.C Current I [A]
Inductance L [MH]
?D.C. BIAS CHARACTERISTICS (1)
@Rated Current : 1[A], Frequency : 100[kHz]
?D.C. BIAS CHARACTERISTICS (2)
@Rated Current : 2[A], Frequency : 100[kHz]
?D.C. BIAS CHARACTERISTICS (3)
@Rated Current : 3[A], Frequency : 100[kHz]
DUST CHOKE COILS
CAT. No. E1008G
?MAJOR USES
@Output choke coils for Switching Mode Power Supply
@Choke coils for Power Factor Corrective circuit
?FEATURES
@Smaller than sendust products; by the feature of higher saturation
magnetic flux density and better D.C. bias characteristics
High Flux (Fe-Ni)
(3/4)
*1 Rated inductance tolerance ; P20%, the inductance at current 0[A] indicates the reference value.
*2 The number of turns indicates the reference value.
The specification of the inductance takes precedence over that of the number of turns.
*3 Correspondence with the core case is possible. (PET:UL94V-0 155C)
There is a horizontal putting type in all items in the above list.
'V' changes into "H" in last the third digit of the name of items.
There is a type with the length putting seat in @ item in the above list. "D" in last the third digit of the name of items.
There is a type with the length putting seat in item in the above list.
"V" changes into "D" in last the third digit of the name of items.
*Order the auxiliary pins separately if they are required for the pedestal.
Please select them according to the situation.
LHDM003101CPFV0E
LHDM005550CPFV0E
LHDM003231CTBV0E
LHDM005141CTBV0E
LHDM010330CTBV0E
LHDM005571CYFV0E *3
LHDM010151CYBV0E *3
LHDM020200CYBV0E *3
3
5
3
5
10
5
10
20
120
78
250
160
37
710
170
24
100
55
230
140
33
570
150
20
45
25
96
52
12
76
28
6
22.0
22.5
29.0
29.5
31.5
46.5
47.5
48.0
23.0
23.5
30.0
30.5
32.5
47.5
48.5
49.0
13.5
14.5
16.5
17.5
19.5
23.0
26.0
26.5
0.8F
B1P-41T
1.0F
B1P-33T
0.8F
B1P-70T
1.0F
B1P-56T
1.6F
B1P-27T
1.1F
B1P-65T
1.6F
B1P-46T
1.8F
B2P-17T
Inductance (100kHz)
Rated
Current
A
0[A]
mHRating
mH
D.C.R.
mo
(max)
Winding
mmfblines-turns
Outside Dimensions
D1
mm W
mm
D2
mm
*1 *2
Coil Part No.
?COIL STANDARD SPECIFICATIONS
1
10
100
1000
LHDM010151CYBV0E
LHDM010330CYBV0E
LHDM020200CYBV0E
D.C Current I [A]
Inductance L [MH]
0 5 10 15 20 25 30
1
10
100
1000
10000
LHDM005571CYFV0E
LHDM003231CTBV0E
LHDM005141CTBV0E
LHDM003101CPFV0E
LHDM005550CPFV0E
D.C Current I [A]
Inductance L [MH]
0246810
?D.C. BIAS CHARACTERISTICS (1)
@Frequency : 100[kHz]
?D.C. BIAS CHARACTERISTICS (2)
@Frequency : 100[kHz]
RoHS
Compliant
DUST CHOKE COILS
CAT. No. E1008G
?MAJOR USES
@Choke coils for Power Factor Corrective circuit
?FEATURES
@Excellent D.C. bias characteristics,according to High Flux core specification.
@All items comform to UL94V-0 Type F (155C) due to coils with core case.
High Flux (Apply to core case)
(4/4)
*1 Rated inductance tolerance ;P20%, the inductance at current 0[A] indicates the reference value.
*2 The number of turns indicates the reference value.
The specification of the inductance takes precedence over that of the number of turns.
There is a horizontal putting type in all items in the above list.
"V" changes into "H" in last the third digit of the name of items.
There is a type with the length putting seat in item in the above list.
"V" changes into "D" in last the third digit of the name of items.
*Order the auxiliary pins separately if they are required for the pedestal.
Please select them according to the situation.
LHDM005451DUFV0E
LHDM007381DVFV0E
LHDM010401DYBV0E
LHDM015301DZBV0E
5
7
10
15
740
760
580
410
450
380
400
300
85
65
58
35
34.5
41.5
50.0
57.0
35.5
42.0
50.5
57.5
22.0
21.5
27.0
32.0
1.0F
B1P-69T
1.2F
B1P-78T
1.5F
B1P-84T
1.3F
B2P-55T
Inductance (100kHz)
Rated
Current
A
0[A]
mHRating
mH
D.C.R.
mo
(max)
Winding
mmfblines-turns
Outside Dimensions
D1
mm W
mm
D2
mm
*1 *2
Coil Part No.
?COIL STANDARD SPECIFICATIONS
LHDM015301DZBV0E
LHDM010421DYBV0E
LHDM007381DVFV0E
LHDM005451DUFV0E
10000
1000
100
10 1 5 10 15 20
D.C current I [A]
Inductance L [MH]
?D.C. BIAS CHARACTERISTICS
@Frequency : 100[kHz]
RoHS
Compliant