FUNCTIONAL BLOCK DIAGRAMS High isolation voltage: 5000 V rms Enhanced system-level ESD performance per IEC 61000-4-x Low power operation 5 V operation 1.6 mA per channel maximum at 0 Mbps to 1 Mbps 3.7 mA per channel maximum at 10 Mbps 3.3 V operation 1.4 mA per channel maximum at 0 Mbps to 1 Mbps 2.4 mA per channel maximum at 10 Mbps 3.3 V/5 V level translation High temperature operation: 105C and 125C options High data rate: dc to 10 Mbps (NRZ) Precise timing characteristics 3 ns maximum pulse width distortion 3 ns maximum channel-to-channel matching High common-mode transient immunity: >25 kV/s 16-lead SOIC wide body package version (RW-16) 16-lead SOIC wide body enhanced creepage version (RI-16-2) Safety and regulatory approvals UL recognition: 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A (RI-16-2 package) IEC 60601-1: 250 V rms (reinforced) IEC 60950-1: 400 V rms (reinforced) VDE certificate of conformity DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 VIORM = 848 V peak Qualified for automotive applications APPLICATIONS General-purpose, high voltage, multichannel isolation Medical equipment Power supplies RS-232/RS-422/RS-485 transceiver isolation Hybrid electric vehicles, battery monitors, and motor drives GENERAL DESCRIPTION The ADuM2200/ADuM22011 are 2-channel digital isolators based on Analog Devices, Inc., iCoupler(R) technology. Combining high speed CMOS and monolithic air core transformer technology, these isolation components provide outstanding performance characteristics that are superior to alternatives such as optocoupler devices. By avoiding the use of LEDs and photodiodes, iCoupler devices remove the design difficulties commonly associated with optocouplers. Typical optocoupler concerns regarding uncertain current transfer ratios, nonlinear transfer functions, and temperature and lifetime effects are eliminated with the simple iCoupler digital interfaces 1 GND1 1 NC 2 VDD1 3 VIA 4 ENCODE DECODE VIB 5 ENCODE DECODE NC 16 GND2 15 NC 14 VDD2 13 VOA 12 VOB 6 11 NC GND1 7 10 NC NC 8 9 GND2 PIN 1 INDICATOR ADuM2200 NC = NO CONNECT 07235-001 FEATURES Figure 1. ADuM2200 GND1 1 NC 2 VDD1 3 VOA 4 DECODE ENCODE 13 V IA VIB 5 ENCODE DECODE 12 VOB NC 6 11 NC GND1 7 10 NC NC 8 9 PIN 1 INDICATOR ADuM2201 16 GND2 15 NC 14 VDD2 NC = NO CONNECT GND2 07235-002 Data Sheet Dual-Channel Digital Isolators, 5 kV ADuM2200/ADuM2201 Figure 2. ADuM2201 and stable performance characteristics. The need for external drivers and other discrete components is eliminated with these iCoupler products. Furthermore, iCoupler devices consume one-tenth to one-sixth the power of optocouplers at comparable signal data rates. The ADuM2200/ADuM2201 isolators provide two independent isolation channels in two channel configurations with data rates up to 10 Mbps (see the Ordering Guide). Both parts operate with the supply voltage on either side ranging from 3.0 V to 5.5 V, providing compatibility with lower voltage systems, as well as enabling voltage translation functionality across the isolation barrier. The ADuM2200/ADuM2201 isolators have a patented refresh feature that ensures dc correctness in the absence of input logic transitions and during power-up/power-down conditions. Similar to the ADuM3200/ADuM3201 isolators, the ADuM2200/ ADuM2201 isolators contain various circuit and layout enhancements that provide increased capability relative to system-level IEC 61000-4-x testing (ESD, burst, and surge). The precise capability in these tests for either the ADuM3200/ADuM3201 or ADuM2200/ADuM2201 products is strongly determined by the design and layout of the user's board or module. For more information, see the AN-793 Application Note, ESD/Latch-Up Considerations with iCoupler Isolation Products. Protected by U.S. Patents 5,952,849; 6,873,065; 6,903,578; and 7,075,329. Other patents pending. Rev. G Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 (c)2008-2015 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com ADuM2200/ADuM2201 Data Sheet TABLE OF CONTENTS Features .............................................................................................. 1 Recommended Operating Conditions .......................................8 Applications ....................................................................................... 1 Absolute Maximum Ratings ............................................................9 General Description ......................................................................... 1 ESD Caution...................................................................................9 Functional Block Diagrams ............................................................. 1 Pin Configurations and Function Descriptions ......................... 10 Revision History ............................................................................... 2 Typical Performance Characteristics ........................................... 12 Specifications..................................................................................... 3 Applications Information .............................................................. 13 Electrical Characteristics--5 V Operation................................ 3 PCB Layout ................................................................................. 13 Electrical Characteristics--3.3 V Operation ............................ 4 Propagation Delay-Related Parameters................................... 13 Electrical Characteristics--Mixed 5 V/3.3 V Operation ........ 5 DC Correctness and Magnetic Field Immunity ..................... 13 Electrical Characteristics--Mixed 3.3 V/5 V Operation ........ 6 Power Consumption .................................................................. 14 Package Characteristics ............................................................... 7 Insulation Lifetime ..................................................................... 15 Regulatory Information ............................................................... 7 Outline Dimensions ....................................................................... 16 Insulation and Safety-Related Specifications ............................ 7 Ordering Guide .......................................................................... 17 Insulation Characteristics (DIN V VDE V 0884-10 (VDE V 0884-10):2006-12) ........................................................................ 8 Automotive Products ................................................................. 17 REVISION HISTORY 9/15--Rev. F to Rev. G Changed 3 V Operation to 3.3 V Operation .............. Throughout Updated Page 1 Layout .................................................................... 1 Changes to Features Section............................................................ 1 Changes to Table 2 and Table 3 ....................................................... 3 Changes to Table 5 and Table 6 ....................................................... 4 Changes to Table 8 and Table 9 ....................................................... 5 Changes to Table 11 and Table 12 .................................................. 6 7/15--Rev. E to Rev. F Changed ADuM320x to ADuM3200/ADuM3201 ... Throughout Changes to Table14 ........................................................................... 7 2/13--Rev. D to Rev. E Changes to Table 19 .......................................................................... 9 1/13--Rev. C to Rev. D Changes to Features Section and Applications Section ............... 1 Changes to Electrical Characteristics--5 V Operation Section .... 3 Replaced Table 1; added Table 2 and Table 3 ................................ 3 Changes to Electrical Characteristics--3 V Operation Section .... 4 Replaced Table 2; added Table 5 and Table 6 ................................ 4 Changed Electrical Characteristics--Mixed 5 V/3 V or 3 V/5 V Operation Section to Electrical Characteristics--Mixed 5 V/3 V Operation Section ............................................................................. 5 Replaced Table 3; added Table 8 and Table 9 ................................ 5 Added Electrical Characteristics--Mixed 3 V/5 V Operation Section, Table 10, Table 11, and Table 12 ...................................... 6 Changes to Table 13, Table 14, and Table 15 ................................. 7 Changes to Table 16 and Table 17 ...................................................8 Replaced Figure 3 ..............................................................................8 Changes to Table 18 and Table 19 ...................................................9 Changes to Figure 4 and Table 22................................................. 10 Changes to Figure 5 and Table 23................................................. 11 Changes to PCB Layout Section ................................................... 13 Updated Outline Dimensions ....................................................... 16 Changes to Ordering Guide .......................................................... 17 Added Automotive Products Section .......................................... 17 3/12--Rev. B to Rev. C Created Hyperlink for Safety and Regulatory Approvals Entry in Features Section ............................................................................1 Change to PCB Layout Section..................................................... 16 8/11--Rev. A to Rev. B Added 16-Lead SOIC_IC Package ................................... Universal Changes to Features Section ............................................................1 Changes to Table 5 and Table 6..................................................... 10 Changes to Endnote 1, Table 8...................................................... 11 Updated Outline Dimensions ....................................................... 19 Changes to Ordering Guide .......................................................... 19 7/08--Rev. 0 to Rev. A Changes to Features Section and General Description Section ........1 Changes to Table 5.......................................................................... 10 1/08--Revision 0: Initial Version Rev. G | Page 2 of 17 Data Sheet ADuM2200/ADuM2201 SPECIFICATIONS ELECTRICAL CHARACTERISTICS--5 V OPERATION All voltages are relative to their respective grounds. 4.5 V VDD1 5.5 V, 4.5 V VDD2 5.5 V. All minimum/maximum specifications apply over the entire recommended operation range, unless otherwise noted. All typical specifications are at TA = 25C, VDD1 = VDD2 = 5.0 V. Table 1. Parameter SWITCHING SPECIFICATIONS Pulse Width Data Rate Propagation Delay Pulse Width Distortion Change vs. Temperature Propagation Delay Skew Channel Matching Codirectional Opposing Directional A Grade Typ Max Symbol Min PW 1000 Min B Grade Typ Max tPSK 100 15 ns Mbps ns ns ps/C ns tPSKCD tPSKOD 50 50 3 15 ns ns tPHL, tPLH PWD 100 Unit 1 150 40 20 10 50 3 20 5 Test Conditions/Comments CL = 15 pF, CMOS levels Within PWD limit Within PWD limit 50% input to 50% output |tPLH - tPHL| Between any two units Table 2. Parameter SUPPLY CURRENT (NO LOAD) ADuM2200 ADuM2201 Symbol Min 1 Mbps--A Grade, B Grade Typ Max IDD1 IDD2 IDD1 IDD2 1.3 1.0 1.1 1.3 Min 10 Mbps--B Grade Typ Max 1.8 1.6 1.6 1.9 3.5 2.0 3.1 3.1 4.6 2.8 4.2 4.0 Unit mA mA mA mA Table 3. Parameter DC SPECIFICATIONS Logic High Input Threshold Logic Low Input Threshold Logic High Output Voltages Logic Low Output Voltages Input Current per Channel Supply Current per Channel Quiescent Input Supply Current Quiescent Output Supply Current Dynamic Input Supply Current Dynamic Output Supply Current AC SPECIFICATIONS Output Rise/Fall Time A Grade B Grade Common-Mode Transient Immunity2 Refresh Rate 1 2 Symbol Min VIH VIL VOH 0.7 VDDx Max 0.3 VDDx VDDx - 0.1 VDDx - 0.5 VOL II Typ -10 IDDI (Q) IDDO (Q) IDDI (D) IDDO (D) 5.0 4.8 0.0 0.2 +0.01 0.4 0.5 0.19 0.05 0.1 0.4 +10 0.8 0.6 Unit Test Conditions/Comments1 V V V V V V A IOx = -20 A, VIx = VIxH IOx = -3.2 mA, VIx = VIxH IOx = 20 A, VIx = VIxL IOx = 3.2 mA, VIx = VIxL 0 V VIx VDDx mA mA mA/Mbps mA/Mbps tR/tF |CM| fr All inputs at logic low All inputs at logic low 10% to 90% 25 10 2.5 35 ns ns kV/s 1.2 Mbps VIx = VDDx, VCM = 1000 V, transient magnitude = 800 V IOx is the Channel x output current, where x = A or B, VIxH is the input side logic high, and VIxL is the input side logic low. |CM| is the maximum common-mode voltage slew rate that can be sustained while maintaining VO > 0.8 VDD. The common-mode voltage slew rates apply to both rising and falling common-mode voltage edges. Rev. G | Page 3 of 17 ADuM2200/ADuM2201 Data Sheet ELECTRICAL CHARACTERISTICS--3.3 V OPERATION All voltages are relative to their respective grounds. 3.0 V VDD1 3.6 V, 3.0 V VDD2 3.6 V. All minimum/maximum specifications apply over the entire recommended operation range, unless otherwise noted. All typical specifications are at TA = 25C, VDD1 = VDD2 = 3.3 V. Table 4. Parameter SWITCHING SPECIFICATIONS Pulse Width Data Rate Propagation Delay Pulse Width Distortion A Grade and B Grade WA Grade and WB Grade Change vs. Temperature Propagation Delay Skew Channel Matching Codirectional Opposing Directional A Grade Typ Max Symbol Min PW 1000 tPHL, tPLH PWD Min B Grade Typ Max 100 1 150 20 10 60 20 40 40 3 4 Unit ns Mbps ns tPSK 100 22 ns ns ps/C ns tPSKCD tPSKOD 50 50 3 22 ns ns 5 Test Conditions/Comments CL = 15 pF, CMOS levels Within PWD limit Within PWD limit 50% input to 50% output |tPLH - tPHL| Between any two units Table 5. Parameter SUPPLY CURRENT (NO LOAD) ADuM2200 ADuM2201 Symbol Min 1 Mbps--A Grade, B Grade Typ Max IDD1 IDD2 IDD1 IDD2 0.8 0.7 0.7 0.8 Min 10 Mbps--B Grade Typ Max 1.3 1.0 1.3 1.6 2.2 1.3 1.9 1.9 3.2 1.7 2.5 2.5 Unit mA mA mA mA Table 6. Parameter DC SPECIFICATIONS Logic High Input Threshold Logic Low Input Threshold Logic High Output Voltages Logic Low Output Voltages Input Current per Channel Supply Current per Channel Quiescent Input Supply Current Quiescent Output Supply Current Dynamic Input Supply Current Dynamic Output Supply Current AC SPECIFICATIONS Output Rise/Fall Time A Grade B Grade Common-Mode Transient Immunity2 Refresh Rate 1 2 Symbol Min VIH VIL VOH 0.7 VDDx Max 0.3 VDDx VDDx - 0.1 VDDx - 0.5 VOL II Typ -10 IDDI (Q) IDDO (Q) IDDI (D) IDDO (D) 3.0 2.8 0.0 0.2 +0.01 0.3 0.3 0.10 0.03 0.1 0.4 +10 0.5 0.5 Unit Test Conditions/Comments1 V V V V V V A IOx = -20 A, VIx = VIxH IOx = -3.2 mA, VIx = VIxH IOx = 20 A, VIx = VIxL IOx = 3.2 mA, VIx = VIxL 0 V VIx VDDx mA mA mA/Mbps mA/Mbps tR/tF |CM| fr All inputs at logic low All inputs at logic low 10% to 90% 25 10 3 35 ns ns kV/s 1.1 Mbps VIx = VDDx, VCM = 1000 V, transient magnitude = 800 V IOx is the Channel x output current, where x = A or B, VIxH is the input side logic high, and VIxL is the input side logic low. |CM| is the maximum common-mode voltage slew rate that can be sustained while maintaining VO > 0.8 VDD. The common-mode voltage slew rates apply to both rising and falling common-mode voltage edges. Rev. G | Page 4 of 17 Data Sheet ADuM2200/ADuM2201 ELECTRICAL CHARACTERISTICS--MIXED 5 V/3.3 V OPERATION All voltages are relative to their respective grounds. 4.5 V VDD1 5.5 V, 3.0 V VDD2 3.6 V. All minimum/maximum specifications apply over the entire recommended operation range, unless otherwise noted. All typical specifications are at TA = 25C, VDD1 = 3.3 V, VDD2 = 5.0 V. Table 7. Parameter SWITCHING SPECIFICATIONS Pulse Width Data Rate Propagation Delay Pulse Width Distortion A Grade and B Grade WA Grade and WB Grade Change vs. Temperature Propagation Delay Skew Channel Matching Codirectional Opposing Directional Symbol Min PW 1000 tPHL, tPLH PWD A Grade Typ Max Min B Grade Typ Max Unit 100 1 150 15 ns Mbps ns 10 55 15 40 40 3 4 tPSK 50 22 ns ns ps/C ns tPSKCD tPSKOD 50 50 3 22 ns ns 5 Test Conditions/ Comments CL = 15 pF, CMOS levels Within PWD limit Within PWD limit 50% input to 50% output |tPLH - tPHL| Between any two units Table 8. Parameter SUPPLY CURRENT (NO LOAD) ADuM2200 ADuM2201 Symbol 1 Mbps--A Grade, B Grade Min Typ Max IDD1 IDD2 IDD1 IDD2 1.3 0.7 1.1 0.8 Min 10 Mbps--B Grade Typ Max 1.8 1.0 1.6 1.6 3.5 1.3 3.1 1.9 4.6 1.7 4.2 2.5 Unit mA mA mA mA Table 9. Parameter DC SPECIFICATIONS Logic High Input Threshold Logic Low Input Threshold Logic High Output Voltages Logic Low Output Voltages Input Current per Channel Supply Current per Channel Quiescent Input Supply Current Quiescent Output Supply Current Dynamic Input Supply Current Dynamic Output Supply Current AC SPECIFICATIONS Output Rise/Fall Time A Grade B Grade Common-Mode Transient Immunity2 Refresh Rate 1 2 Symbol Min VIH VIL VOH 0.7 VDDx Max 0.3 VDDx VDDx - 0.1 VDDx - 0.5 VOL II Typ -10 IDDI (Q) IDDO (Q) IDDI (D) IDDO (D) VDDx VDDx - 0.2 0.0 0.2 +0.01 0.4 0.3 0.19 0.03 0.1 0.4 +10 0.8 0.5 Unit Test Conditions/Comments1 V V V V V V A IOx = -20 A, VIx = VIxH IOx = -3.2 mA, VIx = VIxH IOx = 20 A, VIx = VIxL IOx = 3.2 mA, VIx = VIxL 0 V VIx VDDx mA mA mA/Mbps mA/Mbps tR/tF |CM| fr All inputs at logic low All inputs at logic low 10% to 90% 25 10 3 35 ns ns kV/s 1.2 Mbps VIx = VDDx, VCM = 1000 V, transient magnitude = 800 V IOx is the Channel x output current, where x = A or B, VIxH is the input side logic high, and VIxL is the input side logic low. |CM| is the maximum common-mode voltage slew rate that can be sustained while maintaining VO > 0.8 VDD. The common-mode voltage slew rates apply to both rising and falling common-mode voltage edges. Rev. G | Page 5 of 17 ADuM2200/ADuM2201 Data Sheet ELECTRICAL CHARACTERISTICS--MIXED 3.3 V/5 V OPERATION All voltages are relative to their respective grounds. 3.0 V VDD1 3.6 V, 4.5 V VDD2 5.5 V. All minimum/maximum specifications apply over the entire recommended operation range, unless otherwise noted. All typical specifications are at TA = 25C, VDD1 = 5.0 V, VDD2 = 3.3 V. Table 10. Parameter SWITCHING SPECIFICATIONS Pulse Width Data Rate Propagation Delay Pulse Width Distortion A Grade and B Grade WA Grade and WB Grade Change vs. Temperature Propagation Delay Skew Channel Matching Codirectional Opposing Directional Symbol Min PW 1000 tPHL, tPLH PWD A Grade Typ Max Min B Grade Typ Max 100 1 150 15 10 55 15 40 40 3 4 Unit ns Mbps ns tPSK 50 22 ns ns ps/C ns tPSKCD tPSKOD 50 50 3 22 ns ns 5 Test Conditions/Comments CL = 15 pF, CMOS levels Within PWD limit Within PWD limit 50% input to 50% output |tPLH - tPHL| Between any two units Table 11. Parameter SUPPLY CURRENT (NO LOAD) ADuM2200 ADuM2201 Symbol 1 Mbps--A Grade, B Grade Min Typ Max IDD1 IDD2 IDD1 IDD2 0.8 1.0 0.7 1.3 Min 10 Mbps--B Grade Typ Max 1.3 1.6 1.3 1.9 2.2 2.0 1.9 3.1 3.2 2.8 2.5 4.0 Unit mA mA mA mA Table 12. Parameter DC SPECIFICATIONS Logic High Input Threshold Logic Low Input Threshold Logic High Output Voltages Logic Low Output Voltages Input Current per Channel Supply Current per Channel Quiescent Input Supply Current Quiescent Output Supply Current Dynamic Input Supply Current Dynamic Output Supply Current AC SPECIFICATIONS Output Rise/Fall Time A Grade B Grade Common-Mode Transient Immunity2 Refresh Rate 1 2 Symbol Min VIH VIL VOH 0.7 VDDx Max 0.3 VDDx VDDx - 0.1 VDDx - 0.5 VOL II Typ -10 IDDI (Q) IDDO (Q) IDDI (D) IDDO (D) VDDx VDDx - 0.2 0.0 0.2 +0.01 0.3 0.5 0.10 0.05 0.1 0.4 +10 0.5 0.6 Unit Test Conditions/Comments1 V V V V V V A IOx = -20 A, VIx = VIxH IOx = -3.2 mA, VIx = VIxH IOx = 20 A, VIx = VIxL IOx = 3.2 mA, VIx = VIxL 0 V VIx VDDx mA mA mA/Mbps mA/Mbps tR/tF |CM| fr All inputs at logic low All inputs at logic low 10% to 90% 25 10 2.5 35 ns ns kV/s 1.1 Mbps VIx = VDDx, VCM = 1000 V, transient magnitude = 800 V IOx is the Channel x output current, where x = A or B, VIxH is the input side logic high, and VIxL is the input side logic low. |CM| is the maximum common-mode voltage slew rate that can be sustained while maintaining VO > 0.8 VDD. The common-mode voltage slew rates apply to both rising and falling common-mode voltage edges. Rev. G | Page 6 of 17 Data Sheet ADuM2200/ADuM2201 PACKAGE CHARACTERISTICS Table 13. Parameter Resistance (Input-to-Output)1 Capacitance (Input-to-Output)1 Input Capacitance2 IC Junction-to-Ambient Thermal Resistance 1 2 Symbol RI-O CI-O CI JA Min Typ 1012 2 4 45 Max Unit pF pF C/W Test Conditions/Comments f = 1 MHz This device is considered a 2-terminal device: Pin 1 through Pin 8 are shorted together, and Pin 9 through Pin 16 are shorted together. Input capacitance is from any input data pin to ground. REGULATORY INFORMATION The ADuM2200/ADuM2201 are approved by the organizations listed in Table 14. Refer to Table 19 and the Insulation Lifetime section for more information about the recommended maximum working voltages for specific cross-isolation waveforms and insulation levels. Table 14. UL Recognized Under UL 1577 Component Recognition Program1 Single Protection, 5000 V rms Isolation Voltage File E214100 1 2 CSA Approved under CSA Component Acceptance Notice 5A CQC Approved under CQC11-471543-2012 Basic insulation per CSA 60950-1-07 and IEC 60950-1, 600 V rms (848 V peak) maximum working voltage Basic insulation per GB4943.1-2011, 600 V rms (848 V peak) maximum working voltage, tropical climate, altitude 5000 m RW-16 package: reinforced insulation per GB4943.1-2011, 380 V rms (537 V peak) maximum working voltage, tropical climate, altitude 5000 m RW-16 package: reinforced insulation per CSA 60950-1-07 and IEC 60950-1, 380 V rms (537 V peak) maximum working voltage; reinforced insulation per IEC 60601-1, 125 V rms (176 V peak) maximum working voltage RI-16-2 package: reinforced insulation per CSA 60950-1-07 and IEC 60950-1, 400 V rms (565 V peak) maximum working voltage; reinforced insulation per IEC 60601-1, 250 V rms (353 V peak) maximum working voltage File 205078 VDE Certified according to DIN V VDE V 0884-10 (VDE V 0884-10):2006-122 Reinforced insulation, 848 V peak RI-16 package: reinforced insulation per 400 V rms (565 V peak) maximum working voltage, tropical climate, altitude 5000 m File: CQC14001105917 File 2471900-4880-0001 In accordance with UL 1577, each ADuM2200/ADuM2201 is proof tested by applying an insulation test voltage 6000 V rms for 1 sec (current leakage detection limit = 10 A). In accordance with DIN V VDE V 0884-10 (VDE V 0884-10):2006-12, each ADuM2200/ADuM2201 is proof tested by applying an insulation test voltage 1592 V peak for 1 sec (partial discharge detection limit = 5 pC). The asterisk (*) marking branded on the components designates DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 approval. INSULATION AND SAFETY-RELATED SPECIFICATIONS Table 15. Parameter Rated Dielectric Insulation Voltage Minimum External Air Gap (Clearance) L(I01) Minimum External Tracking (Creepage) L(I02) RW-16 Package RI-16-2 Package Minimum Internal Distance (Internal Clearance) Tracking Resistance (Comparative Tracking Index) Isolation Group Symbol CTI Value 5000 8.0 min Unit V rms mm 7.7 min 8.3 min 0.017 min >400 II mm mm mm V Rev. G | Page 7 of 17 Test Conditions/Comments 1-minute duration Distance measured from input terminals to output terminals, shortest distance through air along the PCB mounting plane, as an aid to PC board layout Measured from input terminals to output terminals, shortest distance path along body Insulation distance through insulation DIN IEC 112/VDE 0303, Part 1 Material Group (DIN VDE 0110, 1/89, Table 1) ADuM2200/ADuM2201 Data Sheet INSULATION CHARACTERISTICS (DIN V VDE V 0884-10 (VDE V 0884-10):2006-12) These isolators are suitable for reinforced electrical isolation only within the safety limit data. Maintenance of the safety data is ensured by means of protective circuits. The asterisk (*) marking branded on the components designates DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 approval for 848 V peak working voltage. Table 16. Description Installation Classification per DIN VDE 0110 For Rated Mains Voltage 150 V rms For Rated Mains Voltage 300 V rms For Rated Mains Voltage 400 V rms Climatic Classification Pollution Degree per DIN VDE 0110, Table 1 Maximum Working Insulation Voltage Input-to-Output Test Voltage, Method B1 Test Conditions/Comments VIORM x 1.875 = Vpd(m), 100% production test, tini = tm = 1 sec, partial discharge < 5 pC Input-to-Output Test Voltage, Method A After Environmental Tests Subgroup 1 VIORM x 1.5 = Vpd(m), tini = 60 sec, tm = 10 sec, partial discharge < 5 pC VIORM x 1.2 = Vpd(m), tini = 60 sec, tm = 10 sec, partial discharge < 5 pC Transient overvoltage, tTR = 10 sec V peak = 10 kV, 1.2 s rise time, 50 s, 50% fall time Maximum value allowed in the event of a failure; see Figure 3 After Input and/or Safety Tests Subgroup 2 and Subgroup 3 Highest Allowable Overvoltage Surge Isolation Voltage Safety Limiting Values SAFE LIMITING POWER (W) Maximum Junction Temperature Total Power Dissipation at 25C Insulation Resistance at TS VIO = 500 V Symbol Characteristic Unit VIORM Vpd(m) I to IV I to IV I to IV 40/105/21 2 848 1592 V peak V peak Vpd(m) 1273 V peak Vpd(m) 1018 V peak VTR VIOSM 6000 6000 V peak V peak TS PS RS 150 2.78 >109 C W 3.0 RECOMMENDED OPERATING CONDITIONS 2.5 Table 17. Parameter Operating Temperature A Grade and B Grade WA Grade and WB Grade Supply Voltages1 Input Signal Rise and Fall Times 2.0 1.5 1.0 1 0 0 50 100 150 VDD1, VDD2 All voltages are relative to their respective grounds. 07235-003 0.5 Symbol TA 200 AMBIENT TEMPERATURE (C) Figure 3. Thermal Derating Curve, Dependence of Safety Limiting Values with Case Temperature per DIN V VDE V 0884-10 Rev. G | Page 8 of 17 Min Max Unit -40 -40 3.0 +105 +125 5.5 1.0 C C V ms Data Sheet ADuM2200/ADuM2201 ABSOLUTE MAXIMUM RATINGS Table 18. Parameter Storage Temperature (TST) Ambient Operating Temperature (TA) Supply Voltage (VDD1, VDD2)1 Input Voltage (VIA, VIB)1, 2 Output Voltage (VOA, VOB)1, 2 Average Output Current per Pin3 Side 1 (IO1) Side 2 (IO2) Common-Mode Transients4 Stresses at or above those listed under Absolute Maximum Ratings may cause permanent damage to the product. This is a stress rating only; functional operation of the product at these or any other conditions above those indicated in the operational section of this specification is not implied. Operation beyond the maximum operating conditions for extended periods may affect product reliability. Rating -65C to +150C -40C to +125C -0.5 V to +7.0 V -0.5 V to VDDI + 0.5 V -0.5 V to VDDO + 0.5 V ESD CAUTION -18 mA to +18 mA -22 mA to +22 mA -100 kV/s to +100 kV/s 1 All voltages are relative to their respective grounds. VDDI and VDDO refer to the supply voltages on the input and output sides of a given channel, respectively. See the PCB Layout section. 3 See Figure 3 for maximum rated current values for various temperatures. 4 Refers to common-mode transients across the insulation barrier. Commonmode transients exceeding the absolute maximum rating can cause latch-up or permanent damage. 2 Table 19. Maximum Continuous Working Voltage1 Parameter AC Voltage, Bipolar Waveform AC Voltage, Unipolar Waveform Reinforced Insulation DC Voltage Reinforced Insulation 1 Max 565 Unit V peak Constraint 50-year minimum lifetime 1131 V peak 50-year minimum lifetime 1131 V peak 50-year minimum lifetime Refers to continuous voltage magnitude imposed across the isolation barrier. See the Insulation Lifetime section for more information. Table 20. ADuM2200 Truth Table (Positive Logic) VIA Input1 H L H L X VIB Input1 H L L H X VDD1 State Powered Powered Powered Powered Unpowered VDD2 State Powered Powered Powered Powered Powered VOA Output1 H L H L H VOB Output1 H L L H H X X Powered Unpowered Indeterminate Indeterminate 1 Notes Outputs return to the input state within 1 s of VDDI power restoration. Outputs return to the input state within 1 s of VDDO power restoration. H is logic high, L is logic low, and X is don't care. Table 21. ADuM2201 Truth Table (Positive Logic) VIA Input1 H L H L X VIB Input1 H L L H X VDD1 State Powered Powered Powered Powered Unpowered VDD2 State Powered Powered Powered Powered Powered VOA Output1 H L H L Indeterminate VOB Output1 H L L H H X X Powered Unpowered H Indeterminate 1 H is logic high, L is logic low, and X is don't care. Rev. G | Page 9 of 17 Notes Outputs return to the input state within 1 s of VDDI power restoration. Outputs return to the input state within 1 s of VDDO power restoration. ADuM2200/ADuM2201 Data Sheet PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS 16 GND2 GND1 1 15 NC NC 2 VIA 4 VIB 5 ADuM2200 14 VDD2 13 VOA TOP VIEW (Not to Scale) 12 VOB NC 6 11 NC GND1 7 10 NC NC 8 9 GND2 NC = NO CONNECT 07235-004 VDD1 3 NOTES: 1. PIN 1 AND PIN 7 ARE INTERNALLY CONNECTED TO EACH OTHER, AND IT IS RECOMMENDED THAT BOTH PINS BE CONNECTED TO A COMMON GROUND. 2. PIN 9 AND PIN 16 ARE INTERNALLY CONNECTED TO EACH OTHER, AND IT IS RECOMMENDED THAT BOTH PINS BE CONNECTED TO A COMMON GROUND. Figure 4. ADuM2200 Pin Configuration Table 22. ADuM2200 Pin Function Descriptions Pin No. 1, 7 Mnemonic GND1 2 3 4 5 6 8 9, 16 NC VDD1 VIA VIB NC NC GND2 10 11 12 13 14 15 NC NC VOB VOA VDD2 NC Description Ground 1. Ground reference for Isolator Side 1. Pin 1 and Pin 7 are internally connected to each other, and it is recommended that both pins be connected to a common ground. No Internal Connection. Supply Voltage for Isolator Side 1, 3.0 V to 5.5 V. Logic Input A. Logic Input B. No Internal Connection. No Internal Connection. Ground 2. Ground reference for Isolator Side 2. Pin 9 and Pin 16 are internally connected to each other, and it is recommended that both pins be connected to a common ground. No Internal Connection. No Internal Connection. Logic Output B. Logic Output A. Supply Voltage for Isolator Side 2, 3.0 V to 5.5 V. No Internal Connection. Rev. G | Page 10 of 17 Data Sheet ADuM2200/ADuM2201 16 GND2 GND1 1 15 NC NC 2 VOA 4 VIB 5 ADuM2201 14 VDD2 13 VIA TOP VIEW (Not to Scale) 12 VOB NC 6 11 NC GND1 7 10 NC NC 8 9 GND2 NC = NO CONNECT 07235-005 VDD1 3 NOTES: 1. PIN 1 AND PIN 7 ARE INTERNALLY CONNECTED TO EACH OTHER, AND IT IS RECOMMENDED THAT BOTH PINS BE CONNECTED TO A COMMON GROUND. 2. PIN 9 AND PIN 16 ARE INTERNALLY CONNECTED TO EACH OTHER, AND IT IS RECOMMENDED THAT BOTH PINS BE CONNECTED TO A COMMON GROUND. Figure 5. ADuM2201 Pin Configuration Table 23. ADuM2201 Pin Function Descriptions Pin No. 1, 7 Mnemonic GND1 2 3 4 5 6 8 9, 16 NC VDD1 VOA VIB NC NC GND2 10 11 12 13 14 15 NC NC VOB VIA VDD2 NC Description Ground 1. Ground reference for Isolator Side 1. Pin 1 and Pin 7 are internally connected to each other, and it is recommended that both pins be connected to a common ground. No Internal Connection. Supply Voltage for Isolator Side 1, 3.0 V to 5.5 V. Logic Output A. Logic Input B. No Internal Connection. No Internal Connection. Ground 2. Ground reference for Isolator Side 2. Pin 9 and Pin 16 are internally connected to each other, and it is recommended that both pins be connected to a common ground. No Internal Connection. No Internal Connection. Logic Output B. Logic Input A. Supply Voltage for Isolator Side 2, 3.0 V to 5.5 V. No Internal Connection. Rev. G | Page 11 of 17 ADuM2200/ADuM2201 Data Sheet TYPICAL PERFORMANCE CHARACTERISTICS 10 20 15 CURRENT (mA) CURRENT/CHANNEL (mA) 8 6 4 10 5V 5V 5 2 3V 0 10 20 DATA RATE (Mbps) 30 0 07235-006 0 0 30 Figure 9. Typical ADuM2200 VDD1 Supply Current vs. Data Rate for 5 V and 3.3 V Operation 4 4 3 3 CURRENT (mA) CURRENT/CHANNEL (mA) Figure 6. Typical Input Supply Current per Channel vs. Data Rate for 5 V and 3.3 V Operation (No Output Load) 10 20 DATA RATE (Mbps) 07235-009 3V 2 5V 5V 2 3V 1 1 0 10 20 DATA RATE (Mbps) 30 0 07235-007 0 0 10 20 DATA RATE (Mbps) 30 07235-010 3V Figure 10. Typical ADuM2200 VDD2 Supply Current vs. Data Rate for 5 V and 3.3 V Operation Figure 7. Typical Output Supply Current per Channel vs. Data Rate for 5 V and 3.3 V Operation (No Output Load) 10 4 CURRENT (mA) 2 5V 6 4 5V 1 2 3V 3V 0 10 20 DATA RATE (Mbps) 30 Figure 8. Typical Output Supply Current per Channel vs. Data Rate for 5 V and 3.3 V Operation (15 pF Output Load) 0 07235-008 0 0 10 20 DATA RATE (Mbps) 30 07235-011 CURRENT/CHANNEL (mA) 8 3 Figure 11. Typical ADuM2201 VDD1 or VDD2 Supply Current vs. Data Rate for 5 V and 3.3 V Operation Rev. G | Page 12 of 17 Data Sheet ADuM2200/ADuM2201 APPLICATIONS INFORMATION PCB LAYOUT The ADuM2200/ADuM2201 digital isolators require no external interface circuitry for the logic interfaces. Power supply bypassing is strongly recommended at the input and output supply pins (see Figure 12). Bypass capacitors are most conveniently connected between Pin 1 and Pin 3 for VDD1 and between Pin 14 and Pin 16 for VDD2. The capacitor value should be between 0.01 F and 0.1 F. The total lead length between both ends of the capacitor and the input power supply pin should not exceed 2 mm. Consider bypassing between Pin 3 and Pin 7 and between Pin 9 and Pin 14 unless the ground pair on each package side is connected close to the package. GND2 NC The limitation on the magnetic field immunity of the ADuM2200/ ADuM2201 is set by the condition in which induced voltage in the transformer receiving coil is large enough to either falsely set or reset the decoder. The following analysis defines the conditions under which this can occur. The 3.3 V operating condition of the ADuM2200/ADuM2201 is examined because it represents the most susceptible mode of operation. NC VDD2 VDD1 VIB VOB NC NC GND1 NC NC GND2 07235-012 VOA/VIA VIA/VOA Figure 12. Recommended Printed Circuit Board Layout In applications involving high common-mode transients, ensure that board coupling across the isolation barrier is minimized. Furthermore, design the board layout such that any coupling that does occur affects all pins equally on a given component side. Failure to ensure this can cause voltage differentials between pins exceeding the absolute maximum ratings for the device as specified in Table 18, thereby leading to latch-up or permanent damage. See the AN-1109 Application Note for board layout guidelines. PROPAGATION DELAY-RELATED PARAMETERS Propagation delay is a parameter that describes the length of time it takes for a logic signal to propagate through a component. The propagation delay to a logic low output can differ from the propagation delay to a logic high output. INPUT (VIx) The pulses at the transformer output have an amplitude greater than 1.0 V. The decoder has a sensing threshold at approximately 0.5 V, thus establishing a 0.5 V margin in which induced voltages can be tolerated. The voltage induced across the receiving coil is given by V = (-d/dt) rn2; n = 1, 2, ... , N where: is the magnetic flux density (gauss). rn is the radius of the nth turn in the receiving coil (cm). N is the number of turns in the receiving coil. Given the geometry of the receiving coil in the ADuM2200/ ADuM2201 and an imposed requirement that the induced voltage be, at most, 50% of the 0.5 V margin at the decoder, a maximum allowable magnetic field is calculated as shown in Figure 14. 50% tPHL 50% Figure 13. Propagation Delay Parameters Pulse width distortion is the maximum difference between these two propagation delay values and is an indication of how accurately the timing of the input signal is preserved. Channel-to-channel matching refers to the maximum amount that the propagation delay differs between channels within a single ADuM2200/ADuM2201 component. MAXIMUM ALLOWABLE MAGNETIC FLUX DENSITY (kgauss) 100 07235-018 tPLH OUTPUT (VOx) Positive and negative logic transitions at the isolator input cause narrow (~1 ns) pulses to be sent to the decoder via the transformer. The decoder is bistable and is, therefore, either set or reset by the pulses, indicating input logic transitions. In the absence of logic transitions at the input for more than ~1 s, a periodic set of refresh pulses indicative of the correct input state is sent to ensure dc correctness at the output. If the decoder receives no internal pulses for more than approximately 5 s, the input side is assumed to be unpowered or nonfunctional, and the isolator output is forced to a default state by the watchdog timer circuit (see Table 20 and Table 21). Propagation delay skew refers to the maximum amount that the propagation delay differs between multiple ADuM2200/ ADuM2201 components operated under the same conditions. Rev. G | Page 13 of 17 10 1 0.1 0.01 0.001 1k 100k 1M 10k 10M MAGNETIC FIELD FREQUENCY (Hz) 100M Figure 14. Maximum Allowable External Magnetic Flux Density 07235-019 GND1 DC CORRECTNESS AND MAGNETIC FIELD IMMUNITY ADuM2200/ADuM2201 Data Sheet For example, at a magnetic field frequency of 1 MHz, the maximum allowable magnetic field of 0.2 kgauss induces a voltage of 0.25 V at the receiving coil. This voltage is approximately 50% of the sensing threshold and does not cause a faulty output transition. Similarly, if such an event occurs during a transmitted pulse (and is of the worst-case polarity), it reduces the received pulse from >1.0 V to 0.75 V--still well above the 0.5 V sensing threshold of the decoder. POWER CONSUMPTION The preceding magnetic flux density values correspond to specific current magnitudes at given distances from the ADuM2200/ADuM2201 transformers. Figure 15 expresses these allowable current magnitudes as a function of frequency for selected distances. As shown in Figure 15, the ADuM2200/ ADuM2201 are immune and can be affected only by extremely large currents operated at high frequency very close to the component. For the 1 MHz example noted, a 0.5 kA current placed 5 mm away from the ADuM2200/ADuM2201 is required to affect the operation of the component. For each output channel, the supply current is given by MAXIMUM ALLOWABLE CURRENT (kA) 1000 DISTANCE = 1m 100 10 1 DISTANCE = 5mm 0.1 100k 1M 10M 100M MAGNETIC FIELD FREQUENCY (Hz) 07235-020 0.01 10k For each input channel, the supply current is given by IDDI = IDDI (Q) f 0.5fr IDDI = IDDI (D) x (2f - fr) + IDDI (Q) f > 0.5fr IDDO = IDDO (Q) f 0.5fr -3 IDDO = (IDDO (D) + (0.5 x 10 ) x CL x VDDO) x (2f - fr) + IDDO (Q) f > 0.5fr where: IDDI (D), IDDO (D) are the input and output dynamic supply currents per channel (mA/Mbps). IDDI (Q), IDDO (Q) are the specified input and output quiescent supply currents (mA). CL is the output load capacitance (pF). VDDO is the output supply voltage (V). f is the input logic signal frequency (MHz, half of the input data rate, NRZ signaling). fr is the input stage refresh rate (Mbps). To calculate the total IDD1 and IDD2, the supply currents for each input and output channel corresponding to IDD1 and IDD2 are calculated and totaled. DISTANCE = 100mm 1k The supply current at a given channel of the ADuM2200/ ADuM2201 isolators is a function of the supply voltage, the channel data rate, and the channel output load. Figure 15. Maximum Allowable Current for Various Current-to-ADuM2200/ADuM2201 Spacings Figure 6 and Figure 7 provide per-channel supply currents as a function of data rate for an unloaded output condition. Figure 8 provides per-channel supply current as a function of data rate for a 15 pF output condition. Figure 9 through Figure 11 provide total IDD1 and IDD2 as a function of data rate for the ADuM2200/ ADuM2201 channel configurations. Note that at combinations of strong magnetic field and high frequency, any loops formed by printed circuit board traces can induce error voltages sufficiently large to trigger the thresholds of succeeding circuitry. Care should be taken in the layout of such traces to avoid this possibility. Rev. G | Page 14 of 17 Data Sheet ADuM2200/ADuM2201 The values shown in Table 19 summarize the peak voltage for 50 years of service life for a bipolar ac operating condition and the maximum CSA/VDE approved working voltages. In many cases, the approved working voltage is higher than the 50-year service life voltage. Operation at these high working voltages can lead to shortened insulation life in some cases. Note that the voltage presented in Figure 17 is shown as sinusoidal for illustration purposes only. It is meant to represent any voltage waveform varying between 0 V and some limiting value. The limiting value can be positive or negative, but the voltage cannot cross 0 V. The insulation lifetime of the ADuM2200/ADuM2201 depends on the voltage waveform type imposed across the isolation barrier. The iCoupler insulation structure degrades at different rates, depending on whether the waveform is bipolar ac, unipolar ac, or dc. Figure 16, Figure 17, and Figure 18 illustrate these different isolation voltage waveforms. Bipolar ac voltage is the most stringent environment. The goal of a 50-year operating lifetime under the bipolar ac condition determines the maximum working voltage recommended by Analog Devices. Rev. G | Page 15 of 17 RATED PEAK VOLTAGE 07235-021 Analog Devices performs accelerated life testing using voltage levels higher than the rated continuous working voltage. Acceleration factors for several operating conditions are determined. These factors allow calculation of the time to failure at the actual working voltage. Any cross-insulation voltage waveform that does not conform to Figure 17 or Figure 18 should be treated as a bipolar ac waveform and its peak voltage should be limited to the 50-year lifetime voltage value listed in Table 19. 0V Figure 16. Bipolar AC Waveform RATED PEAK VOLTAGE 07235-022 All insulation structures eventually break down when subjected to voltage stress over a sufficiently long period. The rate of insulation degradation is dependent on the characteristics of the voltage waveform applied across the insulation. In addition to the testing performed by the regulatory agencies, Analog Devices carries out an extensive set of evaluations to determine the lifetime of the insulation structure within the ADuM2200/ ADuM2201 devices. In the case of unipolar ac or dc voltage, the stress on the insulation is significantly lower. This allows operation at higher working voltages while still achieving a 50-year service life. The working voltages listed in Table 19 can be applied while maintaining the 50-year minimum lifetime, provided that the voltage conforms to either the unipolar ac or dc voltage cases. 0V Figure 17. Unipolar AC Waveform RATED PEAK VOLTAGE 07235-023 INSULATION LIFETIME 0V Figure 18. DC Waveform ADuM2200/ADuM2201 Data Sheet OUTLINE DIMENSIONS 10.50 (0.4134) 10.10 (0.3976) 9 16 7.60 (0.2992) 7.40 (0.2913) 1 8 1.27 (0.0500) BSC 0.30 (0.0118) 0.10 (0.0039) COPLANARITY 0.10 10.65 (0.4193) 10.00 (0.3937) SEATING PLANE 0.51 (0.0201) 0.31 (0.0122) 0.75 (0.0295) 45 0.25 (0.0098) 2.65 (0.1043) 2.35 (0.0925) 8 0 1.27 (0.0500) 0.40 (0.0157) 0.33 (0.0130) 0.20 (0.0079) 03-27-2007-B COMPLIANT TO JEDEC STANDARDS MS-013-AA CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN. Figure 19. 16-Lead Standard Small Outline Package [SOIC_W] Wide Body (RW-16) Dimensions shown in millimeters and (inches) 12.85 12.75 12.65 1.93 REF 16 9 7.60 7.50 7.40 10.51 10.31 10.11 8 PIN 1 MARK 2.64 2.54 2.44 2.44 2.24 0.30 0.20 0.10 COPLANARITY 0.1 0.71 0.50 0.31 0.25 BSC GAGE PLANE 45 SEATING PLANE 1.27 BSC 1.01 0.76 0.51 0.46 0.36 COMPLIANT TO JEDEC STANDARDS MS-013-AC Figure 20. 16-Lead Standard Small Outline Package, with Increased Creepage [SOIC_IC] Wide Body (RI-16-2) Dimensions shown in millimeters Rev. G | Page 16 of 17 0.32 0.23 8 0 11-15-2011-A 1 Data Sheet ADuM2200/ADuM2201 ORDERING GUIDE Model1, 2, 3 ADuM2200ARIZ ADuM2200ARWZ ADuM2200WARWZ ADuM2200BRIZ ADuM2200BRWZ ADuM2200WBRWZ ADuM2201ARIZ ADuM2201ARWZ ADuM2201WARWZ ADuM2201BRIZ ADuM2201BRWZ ADuM2201WBRWZ Number of Inputs, VDD1 Side 2 2 2 2 2 2 1 1 1 1 1 1 Number of Inputs, VDD2 Side 0 0 0 0 0 0 1 1 1 1 1 1 Maximum Data Rate (Mbps) 1 1 1 10 10 10 1 1 1 10 10 10 Maximum Propagation Delay, 5 V (ns) 150 150 150 50 50 50 150 150 150 50 50 50 Maximum Pulse Width Distortion (ns) 40 40 40 3 3 3 40 40 40 3 3 3 Temperature Range -40C to +105C -40C to +105C -40C to +125C -40C to +105C -40C to +105C -40C to +125C -40C to +105C -40C to +105C -40C to +125C -40C to +105C -40C to +105C -40C to +125C Package Description 16-Lead SOIC_IC 16-Lead SOIC_W 16-Lead SOIC_W 16-Lead SOIC_IC 16-Lead SOIC_W 16-Lead SOIC_W 16-Lead SOIC_IC 16-Lead SOIC_W 16-Lead SOIC_W 16-Lead SOIC_IC 16-Lead SOIC_W 16-Lead SOIC_W Package Option RI-16-2 RW-16 RW-16 RI-16-2 RW-16 RW-16 RI-16-2 RW-16 RW-16 RI-16-2 RW-16 RW-16 1 Z = RoHS Compliant Part. W = Qualified for Automotive Applications. 3 Tape and reel is available. The addition of an -RL suffix designates a 13" (1,000 units) tape and reel option. 2 AUTOMOTIVE PRODUCTS The ADuM2200W and ADuM2201W models are available with controlled manufacturing to support the quality and reliability requirements of automotive applications. Note that these automotive models may have specifications that differ from the commercial models; therefore, designers should review the Specifications section of this data sheet carefully. Only the automotive grade products shown are available for use in automotive applications. Contact your local Analog Devices account representative for specific product ordering information and to obtain the specific Automotive Reliability reports for these models. (c)2008-2015 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D07235-0-9/15(G) Rev. G | Page 17 of 17 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: ADUM2200BRWZ ADUM2201BRIZ ADUM2201ARIZ-RL ADUM2201BRIZ-RL ADUM2201ARWZ ADUM2201BRWZ ADUM2200BRIZ ADUM2200BRWZ-RL ADUM2200BRIZ-RL ADUM2201BRWZ-RL ADUM2200ARWZ ADUM2201ARIZ ADUM2200ARWZ-RL ADUM2200ARIZ ADUM2201ARWZ-RL ADUM2200ARIZ-RL