DC/DC Converter
E_D-2WR2 & F_D-2WR2 series
2018.07.03-A/4 Page 1 of 5
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
2W, Fixed input voltage, isolated & unregulated
dual /single output
CB Patent Protection RoHS
FEATURES
Operating temperature range: -40to +85
High efficiency up to 85%
High power density
DIP package
Isolation voltage: 3K VDC
No external component required
International standard pin-out
IEC60950, UL60950, EN60950 approval
E_D-2WR2 & F_D-2WR2 series are specially designed for applications where an isolated voltage is required in a distributed power supply
system. They are suitable for
1. Where the voltage of the input power supply is stable (voltage variation: ±10%Vin);
2. Where isolation between input and output is necessary (isolation voltage 3000VDC);
3. Where the output voltage regulation and the ripple & noise of the output voltage is not strictly required;
4. Typical application: digit circuit condition; normal low-frequency artificial circuit condition; relay drive circuit and data switching circuit
condition, etc.
Selection Guide
Certification
Part No.
Input Voltage (VDC)
Output
Max. Capacitive
Load(µF)*
Nominal
(Range)
Output Voltage
(VDC)
Output Current (mA)
(Max./Min.)
UL/CE/CB
E0505D-2WR2
5
(4.5-5.5)
±5
±200/±20
100
E0509D-2WR2
±9
±111/±11
E0512D-2WR2
±12
±83/±8
E0515D-2WR2
±15
±67/±7
F0505D-2WR2
5
400/40
220
F0509D-2WR2
9
222/22
F0512D-2WR2
12
167/17
F0515D-2WR2
15
133/13
F0524D-2WR2
24
83/8
UL/CE/CB
E1205D-2WR2
12
(10.8-13.2)
±5
±200/±20
100
E1212D-2WR2
±12
±83/±8
E1215D-2WR2
±15
±67/±7
E1224D-2WR2
±24
±42/±4
F1205D-2WR2
5
400/40
220
F1212D-2WR2
12
167/17
F1215D-2WR2
15
133/13
F1224D-2WR2
24
83/8
--
E1509D-2WR2
15
(13.5-16.5)
±9
±111/±11
100
E1515D-2WR2
±15
±67/±7
F1505D-2WR2
5
400/40
220
F1509D-2WR2
9
222/22
F1515D-2WR2
15
133/13
UL/CE/CB
E2405D-2WR2
24
(21.6-26.4)
±5
±200/±20
100
E2412D-2WR2
±12
±83/±8
E2415D-2WR2
±15
±67/±7
E2424D-2WR2
±24
±42/±4
F2405D-2WR2
5
400/40
220
F2409D-2WR2
9
222/22
DC/DC Converter
E_D-2WR2 & F_D-2WR2 series
2018.07.03-A/4 Page 2 of 5
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
UL/CE/CB
F2412D-2WR2
24
(21.6-26.4)
12
167/17
220
F2415D-2WR2
15
133/13
F2424D-2WR2
24
83/8
Note: *The capacitive loads of positive and negative outputs are identical.
Input Specifications
Item
Operating Conditions
Min.
Typ.
Max.
Unit
Input Current
(full load / no-load)
5V input
--
500/25
--/60
mA
12V input
--
208/15
--/50
15V input
--
167/15
--/35
24V input
--
105/10
--/30
Reflected Ripple Current
--
15
--
mA
Surge Voltage (1sec. max.)
5V input
-0.7
--
9
VDC
12V input
-0.7
--
18
15V input
-0.7
--
21
24V input
-0.7
--
30
Input Filter
Filter capacitor
Hot Plug
Unavailable
Output Specifications
Item
Operating Conditions
Min.
Typ.
Max.
Unit
Output Voltage Accuracy
See tolerance envelope graph (Fig. 1)
Line Regulation
Input voltage change: ±1%
--
--
±1.2
--
Load Regulation
10%-100% load
5VDC output
--
10
--
%
9VDC output
--
9
--
12VDC output
--
8
--
15VDC output
--
7
--
24VDC output
--
6
--
Ripple & Noise*
20MHz bandwidth
--
75
200
mVp-p
Temperature Coefficient
Full load
--
--
±0.03
%/
Short Circuit Protection**
E24xxD-2WR2/F24xxD-2WR2
E12xxD-2WR2/F12xxD-2WR2
E15xxD-2WR2/F15xxD-2WR2
E0512D-2WR2/E0515D-2WR2
E0524D-2WR2/F0524D-2WR2
--
--
1
s
Others
Continuous, self-recovery
Note: * Ripple and noise are measured by “parallel cable” method, please see DC-DC Converter Application Notes for specific operation;
**For the products E24xxD-2WR2/F24xxD-2WR2/ E12xxD-2WR2/F12xxD-2WR2/ E15xxD-2WR2/F15xxD-2WR2 series,
E0512D-2WR2/E0515D-2WR2/E0524D-2WR2/F0524D-2WR2 models, s
u
pply voltage must be discontinued at the end of short circuit duration.
General Specifications
Item
Operating Conditions
Min.
Typ.
Max.
Unit
Insulation Voltage
Input-output, with the test time of 1 minute and the leak
current lower than 1mA
3000
--
--
VDC
Insulation Resistance
Input-output, insulation voltage 500VDC
1000
--
--
MΩ
Isolation Capacitance
Input-output, 100KHz/0.1V
24V input
--
50
--
pF
Other input
--
20
--
Operating Temperature
Derating if the temperature 85(see Fig. 2)
-40
--
85
Storage Temperature
-55
--
125
Casing Temperature Rise
Ta=25
--
25
--
Pin Welding Resistance Temperature
Welding spot is 1.5mm away from the casing, 10 seconds
--
--
300
Storage Humidity
Non-condensing
--
--
95
%RH
DC/DC Converter
E_D-2WR2 & F_D-2WR2 series
2018.07.03-A/4 Page 3 of 5
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
Switching Frequency
100% load, nominal input voltage
--
100
--
KHz
MTBF
MIL-HDBK-217F@25
3500
--
--
K hours
Physical Specifications
Casing Material
Black flame-retardant and heat-resistant plastic (UL94 V-0)
Dimensions
20.32*10.16*8.20mm
Weight
2.8g(Typ.)
Cooling Method
Free convection
EMC Specifications
EMI
CE
CISPR32/EN55032 CLASS B (see Fig. 4 for recommended circuit)
RE
CISPR32/EN55032 CLASS B (see Fig. 4 for recommended circuit)
EMS
ESD
E_D-2WR2
IEC/EN61000-4-2 Contact ±6KV perf. Criteria B
F_D-2WR2
IEC/EN61000-4-2 Contact ±8KV perf. Criteria B
Product Characteristic Curve
-10%
80%
20%
10% 40% 60%
-5%
0
+5%
+10%
+15%
100%
Typ
.
Min.
Max.
-7.5%
-2.5%
+2.5%
Output Current Percent
(Nominal Input Voltage)
Output Voltage Accuracy
Tolerance Envelope Curve
Fig. 1
120
100
80
60
40
20
0
Output Power Percent(%)
Ambient Temp.( )
Temperature Derating Curve
Safe Operating Area
-40 0 40 85 105 120
Fig. 2
DC/DC Converter
E_D-2WR2 & F_D-2WR2 series
2018.07.03-A/4 Page 4 of 5
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
Design Reference
1. Typical application
If it is required to further reduce input and output ripple, a filter capacitor can be connected to the input and output terminals, see Fig.3.
Moreover, choosing suitable filter capacitor is very important , start-up problems may be caused by too large capacitance. To ensured the
modules running well, the recommended capacitive load values as shown in Table 1.
Vin
GND
+Vo
0V
DC
Cin
DC
Cout
Cout
-Vo
Dual
Singl e
Vin
GND
+Vo
0V
DC
Cin
DC
Cout
Fig.3
Recommended capacitive load value table (Table 1)
Vin
(VDC)
Cin
(µF)
Single
Vout(VDC)
Cout
(µF)
Dual
Vout(VDC)
Cout*
(µF)
5
4.7
5
10
±5
4.7
12
2.2
9
4.7
±9
2.2
15
2.2
12
2.2
±12
1
24
1
15
1
±15
0.47
--
--
24
0.47
±24
0.47
2. EMC typical recommended circuit (CLASS B)
Vin
GND
+Vo
-Vo
(0V)
DC/DC LOAD
LDM
C1
Vin
GND
C3
C2
CY
Fig. 4
Input voltage (VDC)
5/12/15
24
EMI
C1/C2
4.7µF/50V
CY
--
1nF/3KV
C3
Refer to the Cout in Fig.3
LDM
6.8µH
Note: 1. 24V input series is subject to CY (CY : 1nF/3KV).
2. It is not needed to add the component in the peripheral circuit when
parameter with the symbol of "--".
3. Output load requirements
In order to ensure the converter can work reliably with high efficiency, the minimum load should not less than 10% rated load when it is
used. If the needed power is indeed small, please parallel a resistor on the output side ( The sum of the efficient power and resistor
consumption power is not less than 10%).
4. For more information please find the application notes on www.mornsun-power.com
DC/DC Converter
E_D-2WR2 & F_D-2WR2 series
2018.07.03-A/4 Page 5 of 5
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
Dimensions and Recommended Layout
Notes:
1. Packing information please refer to Product Packing Information which can be downloaded from www.mornsun-power.com. Packing
bag number: 58200009;
2. If the product is not operated within the required load range, the product performance cannot be guaranteed to comply with all
parameters in the datasheet;
3. The maximum capacitive load offered were tested at input voltage range and full load;
4. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25, humidity<75%RH with nominal
input voltage and rated output load;
5. All index testing methods in this datasheet are based on our Company’s corporate standards;
6. We can provide product customization service, please contact our technicians directly for specific information;
7. Products are related to laws and regulations: see "Features" and "EMC";
8. Our products shall be classified according to ISO14001 and related environmental laws and regulations, and shall be handled by
qualified units.
MORNSUN Guangzhou Science & Technology Co., Ltd.
Address: No. 5, Kehui St. 1, Kehui Development Center, Science Ave., Guangzhou Science City, Luogang District, Guangzhou, P. R. China
Tel: 86-20-38601850-8801 Fax: 86-20-38601272 E-mail: info@mornsun.cn