Scotchlok™Terminals
MA250DM/6RR thru MA250DM/10RR
Male Adapter Disconnect, Rectangular Tongue,
Non-Insulated
Data Sheet
Specifications
Maximum Operating Temp.: 347˚F (175˚C)
Maximum Current: Same as Wire
Terminal Material: ETP Copper
Terminal Plating: Tin
LC
W
W´
The separable connection formed by the Adapter and
the mating connector(s) may require a suitable strain
relief to prevent accidental separation.
rebmuNtcudorP dutS eziS
baTelaM )´W(htdiW ssenkcihTxWCL
RR6/MD052AM6230.0x052.003.062.008.0
RR8/MD052AM8230.0x052.003.062.008.0
RR01/MD052AM01230.0x052.003.062.008.0
WARNING
Turn power off before installing or removing terminal. All electrical
work should be done according to appropriate electr ical codes.
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
http://www.3M.com/elpd Litho in USA.
© 3M 2002 78-8125-9794-2-A
IMPORTANT NOTICE
Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability
associated with such use.
Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above,
your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect,
special, incidental or consequential regardless of the legal theory asserted.
3M and Scotchlok are trademarks of 3M
Engineering Specification
Adapters shall, electrically and mechanically, connect
to one or more crimp type, separable connectors in a
separable, reusable manner. They may also have a
tongue portion which is flat with a central opening for
mounting around a stud, or curved for mounting
alongside a fuse in its holder.
The Adapter line shall offer variations in separable
connections: Male Quick-Slide (0.250˝ wide), Female
Quick-Slide (0.250˝ wide), Male Snap Plug (0.156˝
dia.), Female Snap Receptacle (0.156˝ and 0.180˝
dia.), and variations in stud mountings: ring tongue (6,
8, 10 stud), and rectangular tongue (0.250˝ x 0.032˝).
The rectangular Tongue Male Tab Adapter shall be tin
plated 0.030˝ thick copper, having a 0.250˝ wide Male
Tab connected to an extending rectangular tongue with
a central opening for mounting around a specified stud
size (6, 8, 10).
The separable connection formed by the Adapter and
the mating connector(s) may require a suitable strain
to prevent accidental separation.
