Ordering number : ENN7432 4AM03MH5 ExPD (Excellent Power Device) 4AM03MH5 Buffer with Open Drain Output (Low-side Switch) Features [4AM03MH5] OUT L L H Z 3 0.25 IN 5 4 Truth Table 0.15 0.3 2 1 0.65 0.07 * unit : mm 2217 0.25 * Low-side switch. (Inverter input) Enable to 25 voltage operation. Low power-loss. Open drain output. 1.6 * Package Dimensions 2.1 * 5 2.0 H : High level voltage 4 (Bottom view) L : Low level voltage 0.85 Z : High impedance 1 Specifications 2 1 : NC 2 : IN 3 : GND 4 : OUT 5 : VDD 3 (Top view) SANYO : MCPH5 Absolute Maximum Ratings at Ta=25C Parameter DC Supply Voltage Symbol Conditions Ratings VDD Input Voltage Unit --0.3 to +25 V VIN VOUT --0.3 to VDD+0.3 V --0.3 to +25 V 10 mA 75 mA Allowable Power Dissipation IIN IOUT PD Storage Temperature Tstg Output Voltage Input Current Output Current Mounted on a ceramic board (600mm20.8mm) 0.8 W --55 to +150 C Recommended Operating Conditions at Ta=25C Parameter DC Supply Voltage Symbol Conditions Ratings Unit VDD 3 to +25 0 to VDD V Output Voltage VIN VOUT 0 to +25 V Input Rise And Fall Time t / v Operating Temperature Topr Input Voltage VDD<5V VDD5V V 100 ns / V 20 ns / V --40 to +85 C Marking : XJ Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D2503 TS IM TA-3910 No.7432-1/4 4AM03MH5 DC Characteristics at Ta=25C Parameter Symbol High-level Input Voltage VIH Low-level Input Voltage VIL Input Leakage Current IIN Low-level Output Voltage VOL Ratings Conditions min typ VDD=5V 3.5 VDD=10V 7.0 V V VDD=15V 11.0 V VDD=25V 18.0 V VDD=5V 1.5 V VDD=10V 3.0 V VDD=15V 4.0 V VDD=25V 7.0 V VDD=25V, VIN=25V 0.1 A VDD=25V, VIN=0 0.1 A VDD=5V, IO=1mA 0.5 V VDD=10V, IO=2.5mA 1.0 V VDD=15V, IO=5.0mA 1.5 V VDD=25V, IO=10mA Supply Current IDD Unit max 2.5 V VDD=5V, VIN=VDD, GND 0.25 A VDD=10V, VIN=VDD, GND VDD=15V, VIN=VDD, GND 0.5 A 1.0 A VDD=25V, VIN=VDD, GND 2.0 A AC Characteristics at Ta=25C Parameter Symbol tPZL Propagation Delay Time tPLZ Input Capacitance Ratings Conditions min typ VDD=5V, RL=1.5k VDD=10V, RL=1k 40 ns 20 ns VDD=15V, RL=750 15 ns VDD=25V, RL=500 12 ns VDD=5V, RL=1.5k 30 ns VDD=10V, RL=1k 20 ns VDD=15V, RL=750 15 ns VDD=25V, RL=500 12 ns 8 pF CIN Block Diagram * Buffer (Open Drain) * Unit max Low-side Switch (Inverter input) VDD OUT VDD OUT 5 4 5 4 Equivalent Circuit 1 2 3 1 2 3 NC IN GND NC IN GND Switching Time Test Circuit Switching Time Wave Form VDD 10ns 10ns VDD RL Input 50% OUT IN GND tPZL tPLZ CL=10pF VDD Output 50% 10% VOL No.7432-2/4 4AM03MH5 IOUT -- VOUT 20 IOUT -- VOUT 80 VDD=5V VDD=10V 70 16 Output Current, IOUT -- mA Ta= --25C 14 25C 12 75C 10 8 6 4 Ta= --25C 50 25C 75C 40 30 20 10 2 0 0 1 2 3 4 0 5 Output Voltage, VOUT -- V --2 Output Current, IOUT -- mA C C 75 50 40 30 20 5 6 7 8 9 10 IT05780 VDD=25V 60 50 40 30 20 10 10 0 0 5 6 7 8 9 10 11 12 13 14 15 Output Voltage, VOUT -- V 0 2 3 4 5 6 7 8 80 VOUT=0.2VDD Output Current, IOUT -- mA = Ta 40 C 5 C 25 C 75 --2 30 20 Ta = 70 70 50 10 11 12 13 14 15 IT05782 IOUT -- VDD VOUT=0.1VDD 60 9 Output Voltage, VOUT -- V IOUT -- VDD 80 1 IT05781 60 C 4 C 3 75 2 --2 5C 1 25 0 Output Current, IOUT -- mA 4 IOUT -- VOUT 70 25 Ta = 60 3 80 5 C VDD=15V 70 2 Output Voltage, VOUT -- V IOUT -- VOUT 80 1 IT05779 25C 25 C 75 C 0 Output Current, IOUT -- mA 60 Ta= -- Output Current, IOUT -- mA 18 50 40 30 20 10 10 0 0 0 5 10 15 20 25 DC Supply Voltage, VDD -- V 30 0 10 15 20 25 30 DC Supply Voltage, VDD -- V RDS(on) -- VDD 400 5 IT05783 IT05784 RDS(on) -- Ta 200 Static Drain-to-Source On-State Resistance, RDS(on) -- Static Drain-to-Source On-State Resistance, RDS(on) -- Ta=25C 350 300 250 200 150 10mA 100 IOUT=1mA 50 180 A / 1m 5V 160 140 120 100 10V / 80 2.5mA mA 15V / 5 A 0 1 25V / m 60 40 20 0 0 5 10 15 DC Supply Voltage, VDD -- V 20 25 IT05785 0 --60 --40 --20 0 20 40 60 Ambient Temperature, Ta -- C 80 100 IT05786 No.7432-3/4 4AM03MH5 RDS(on) -- IOUT 500 PD -- Ta 1.0 Mounted on a ceramic board(600mm20.8mm) Allowable Power Dissipation, PD -- W 450 400 VDD=5V 350 300 250 200 15V 10V Static Drain-to-Source On-State Resistance, RDS(on) -- Ta=25C 150 100 25V 50 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 0 10 20 30 40 50 60 Output Current, IOUT -- mA 70 80 IT05787 0 10 20 30 40 50 60 70 80 Ambient Temperature, Ta -- C 90 100 IT05778 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 2003. Specifications and information herein are subject to change without notice. PS No.7432-4/4