4AM03MH5
No.7432-1/4
Features
•Low-side switch.
(Inverter input)
•Enable to 25 voltage operation.
•Low power-loss.
•Open drain output.
Truth Table
IN OUT
LL
HZ
H : High level voltage
L : Low level voltage
Z : High impedance
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Conditions Ratings Unit
DC Supply Voltage VDD --0.3 to +25 V
Input Voltage VIN --0.3 to VDD+0.3 V
Output Voltage VOUT --0.3 to +25 V
Input Current IIN ±10 mA
Output Current IOUT 75 mA
Allowable Power Dissipation PDMounted on a ceramic board (600mm2✕0.8mm) 0.8 W
Storage Temperature Tstg --55 to +150 °C
Recommended Operating Conditions at Ta=25°C
Parameter Symbol Conditions Ratings Unit
DC Supply Voltage VDD 3 to +25 V
Input Voltage VIN 0 to VDD V
Output Voltage VOUT 0 to +25 V
Input Rise And Fall Time ∆t / ∆vVDD<5V ≤100 ns / V
VDD≥5V 20 ns / V
Operating Temperature Topr --40 to +85 °C
Marking : XJ
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Ordering number : ENN7432
4AM03MH5
Package Dimensions
unit : mm
2217
[4AM03MH5]
D2503 TS IM TA-3910
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
ExPD (Excellent Power Device)
Buffer with Open Drain Output
(Low-side Switch)
0.250.25
0.07
2.1
1.6
2.0
0.65
0.3
0.85
0.15
132
45
123
54
(Bottom view)
(Top view)
1 : NC
2 : IN
3 : GND
4 : OUT
5 : VDD
SANYO : MCPH5
4AM03MH5
No.7432-2/4
DC Characteristics at Ta=25°C
Ratings
Parameter Symbol Conditions min typ max Unit
VDD=5V 3.5 V
High-level Input Voltage VIH VDD=10V 7.0 V
VDD=15V 11.0 V
VDD=25V 18.0 V
VDD=5V 1.5 V
Low-level Input Voltage VIL VDD=10V 3.0 V
VDD=15V 4.0 V
VDD=25V 7.0 V
Input Leakage Current IIN VDD=25V, VIN=25V 0.1 µA
VDD=25V, VIN=0 0.1 µA
VDD=5V, IO=1mA 0.5 V
Low-level Output Voltage VOL VDD=10V, IO=2.5mA 1.0 V
VDD=15V, IO=5.0mA 1.5 V
VDD=25V, IO=10mA 2.5 V
VDD=5V, VIN=VDD, GND 0.25 µA
Supply Current IDD VDD=10V, VIN=VDD, GND 0.5 µA
VDD=15V, VIN=VDD, GND 1.0 µA
VDD=25V, VIN=VDD, GND 2.0 µA
AC Characteristics at Ta=25°C
Ratings
Parameter Symbol Conditions min typ max Unit
VDD=5V, RL=1.5kΩ40 ns
tPZL VDD=10V, RL=1kΩ20 ns
VDD=15V, RL=750Ω15 ns
Propagation Delay Time VDD=25V, RL=500Ω12 ns
VDD=5V, RL=1.5kΩ30 ns
tPLZ VDD=10V, RL=1kΩ20 ns
VDD=15V, RL=750Ω15 ns
VDD=25V, RL=500Ω12 ns
Input Capacitance CIN 8pF
Block Diagram
• Buffer (Open Drain) • Low-side Switch (Inverter input)
Switching Time Test Circuit Switching Time Wave Form
5
VDD OUT
123
NC IN GND
54
V
DD OUT
123
NC IN GND
4
Equivalent Circuit
VDD
OUT
CL=10pF
IN
RLInput
10ns 10ns
Output 10%
50%
50%
tPZL tPLZ
GND
VOL
VDD
VDD
4AM03MH5
No.7432-3/4
0 5 10 15 20 25 30
021436589710
0
20
10
30
40
60
50
70
80
0
10
20
30
60
70
40
50
80
0 1 2 3 4 6 7 8 9 1112131410 155
0 5 10 15 20 25 30
IOUT -- VOUT IOUT -- VOUT
IT05781 IT05782
IOUT -- VOUT IOUT -- VOUT
IT05779 IT05780
0
10
40
50
60
70
80
30
20
0
10
30
40
80
20
60
70
50
IOUT -- VDD IOUT -- VDD
IT05783 IT05784
VDD=10V
Ta= --25°C
25°C
75°C
0 5 15 2010 25
RDS(on) -- VDD
IT05785
0
50
200
400
350
300
250
100
150
--60 --20--40 0 20406080100
0
80
60
40
20
140
120
200
100
160
180
RDS(on) -- Ta
IT05786
Ta=25°C
824369 151411 12 1301 5 7 10
0
40
50
60
70
10
20
30
80
VDD=15V
Ta= --25°C
25°C
75°C
VOUT=0.1✕VDD
Ta= --25°C
25°C
75°C
VOUT=0.2✕VDD
Ta= --25°C
25°C
75°C
VDD=25V
Ta= --25°C
75°C
25°C
IOUT=1mA 10mA
5V / 1mA
10V / 2.5mA
15V / 5mA
25V / 10mA
Output Voltage, VOUT -- V
Output Current, IOUT -- mA
Output Voltage, VOUT -- V
Output Current, IOUT -- mA
Output Voltage, VOUT -- V
Output Current, IOUT -- mA
Output Voltage, VOUT -- V
Output Current, IOUT -- mA
Output Current, IOUT -- mA
DC Supply Voltage, VDD -- V
Output Current, IOUT -- mA
DC Supply Voltage, VDD -- V
DC Supply Voltage, VDD -- V
Static Drain-to-Source
On-State Resistance, RDS(on) -- Ω
Ambient Temperature, Ta -- °C
Static Drain-to-Source
On-State Resistance, RDS(on) -- Ω
0
2
4
6
10
8
14
12
20
18
16
315402
V
DD=5V
Ta= --25°C
75°C
25°C
4AM03MH5
No.7432-4/4
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer’s
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer’s products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of December, 2003. Specifications and information herein are subject
to change without notice.
PS
02010 6050 704030 80
RDS(on) -- IOUT
IT05787
0
50
200
500
350
300
450
400
250
100
150
02010 30 40 50 60 70 80 90 100
0
0.5
0.7
1.0
0.6
0.8
0.1
0.3
0.2
0.4
0.9
PD -- Ta
IT05778
Ta=25°C
VDD=5V
10V
15V
25V
Static Drain-to-Source
On-State Resistance, RDS(on) -- Ω
Output Current, IOUT -- mA
Allowable Power Dissipation, PD -- W
Mounted on a ceramic board(600mm
2
✕0.8mm)
Ambient Temperature, Ta -- °C
