62IN Series Miniature Circular Bayonet-Coupled Connectors AC6201 0313 I ntroduction & Page Contents Introduction Amphenol 62IN series connectors are general purpose, environment resistant , miniature circular connectors with threepoint bayonet coupling and five-key polarisation. Designed to meet the requirements of MIL-C-26482, Series I solder type, these connectors are widely used in applications calling for quick disconnect connectors. 62IN connectors are intermateable and interchangeable with all MIlC-26482 connectors, whether solder or crimp type. These connectors are used worldwide in military and industrial applications and are available in a variety of sizes, styles and configurations. Amphenol 62IN series connectors are also approved to Indian Defence Standard Joint Services Specifications JSS50813, certified by the Electronic Components Standardisation Organisation (LCSO), Bangalore, India. Content Page Introduction 1 General description 2 Insert orientations 3 Key / Keyway orientations 4 Insert arrangements 5 Connector styles 6-11 Dust covers 12 Accessories 13-15 Back-Shell 16-18 Specials and deviations 19 Ordering 62IN series connectors 20 1 G eneral Description Amphenol 62IN series miniature circular bayonet-coupled solder connectors meet the most critical application needs. Design versatility and high reliability performance makes this series ideal for environmental sealing. Shell Shell hardware is manufactured from aluminum alloy and cadmium plated with an olive drab chromate finish. This finish has excellent conductivity; it is non-reflectiing and corrosion resistant. Black anodised finish and cadmium-free zinc cobalt plating are also available. For details, contact factory. Shell styles consist of wall and box mounting receptacles, jam nut receptacles, cable mounting receptacles and straight plugs. Connectors are available in 9 shell sizes : 8, 10, 12, 14, 1, 18, 20, 22 and 24. Positive shell-to-shell keying is provided with keys and keyways in a choice of either normal (N) or any of the preferred alternate positions: W,X,Y and Z. this prevents mismating between shells of different orientations and overcomes the difficulties associated with rotated inserts and standard key/keyway orientation. in the latter system, damage to inserts or contacts can result if excessive force is used to engage non-mating halves. Insert and grommet The insert and grommet are moulded from resilient neoprene, offering high dielectric strength and resistance to oils, gasoline and low temperature. This provides electrical isolation of the contacts in the insert and excellent moisture sealing. Contacts Gold over nickel plated and socket contacts are machined from brass and designed for solder connections. Industrial version crimp contacts are also available on request. Specifications Number of contacts Operating temperature 2 thru 61 in discrete steps -55 C to +125 C Current rating Contact size Rated current Test current 20 7.5A 7.5A 55mV 16 13A 13A 50mV Voltage rating (max. operating voltage at sea level) Service rating AC (rms) I 600V II 1000V Insulation resistance 5000 Mohm Voltage proof Service rating Test voltage (rms) I 1500V II 2300V Wire range accomodations Contact size AWG wire size 20 24, 22 and 20 16 20, 18 and 16 2 Potential drop I nsert Orientations C C C A A A B B B Normal position of insert with pin contacts Alternate position of insert with socket contacts ( counterclockwise) Alternate position of insert with pin contacts ( clockwise) Each diagram shows mating face of insert Insert arrangement Orientation Angles in degrees W X Y Z 8-2 58 122 - - 8-3 8-4 60 45 210 - - - 8-33 90 - - - 8-98 - - - - 10-2 - - - - * 10-5 90 - - - 10-6 90 - - - 10-7 10-8 - - - - 12-3 - - 180 - 12-4 38 - - - 12-8 90 112 203 292 12-10 12-12 60 - 155 - 270 - 295 - 12-14 - - - *14-02 - - - - *14-04 40 92 184 273 14-05 40 92 184 273 *14-08 43 90 - - 14-12 43 90 - - *14-14 17 110 155 234 14-15 14-18 17 15 110 90 155 180 234 270 14-19 30 165 315 - 16-8 54 152 180 331 16-23 158 270 - - 16-26 60 - 275 338 * 18-02 62 119 241 340 18-11 62 119 241 340 18-32 85 138 222 265 20-16 238 318 333 347 20-27 20-29 72 63 144 144 216 252 288 333 20-39 45 126 225 - 20-41 45 126 225 - 22-21 16 135 175 349 *22-36 16 135 175 349 22-41 39 135 264 - *22-44 30 142 226 314 22-55 30 142 226 314 24-31 90 225 225 - 24-61 90 180 270 324 * Special insert arrangements consult factory 3 K ey / Keyway Orientations C A B Angles in degrees Shell size N B C E F N B C E F N B C E F N B C E F 8 105 - - 118 82 35 - - 30 50 75 - - 100 75 50 - - 30 45 10 105 85 125 115 85 35 35 35 30 50 75 75 75 100 75 50 50 50 30 45 12 105 89 121 115 85 35 35 35 30 50 75 75 75 100 75 50 50 50 30 45 14 105 91 119 75 120 35 35 35 30 50 75 75 75 100 75 50 50 50 30 35 16 105 93 117 75 120 35 35 35 30 50 75 75 75 100 75 50 50 50 30 35 18 105 95 115 75 120 35 35 35 30 50 75 75 75 100 75 50 50 50 30 35 20 105 95 115 75 120 35 35 35 30 50 75 75 75 100 75 50 50 50 30 35 22 105 97 113 75 120 35 35 35 30 50 75 75 75 75 75 50 50 50 30 35 24 105 97 113 75 120 35 35 35 30 50 75 75 75 100 75 50 50 50 30 35 Shell size 8 10 12 14 16 18 20 22 24 Angles shown are with reference to the major key or keyway. In receptacles, the major keyway always remains fixed in relation to the mounting flange. For B, C, E and F orientations, the three bayonet locations and associated minor keyways are rotated completely as shown in the tables. The accompanying diagram shows a receptacle shell with keyways. Corresponding key orientations for a mating plug shell are therefore always clockwise. Angle in degrees N B C E F 60 60 60 60 60 60 60 60 60 - - 40 80 47 50 44 46 48 50 50 52 54 76 74 72 70 70 68 68 73 70 70 30 30 30 30 30 30 50 75 75 75 75 75 75 4 I nsert Arrangements Contact Legend Symbol Contact size Front face of pin insert or rear of socket insert illustrated B C A A A A D C B - 8-2 I 2 20 8-3 I 3 20 H A A H 8-33 I 3 20 K G B E C 12-10 I 10 20 L U K V J H E H G B D S T G C F F L X K J H Insert arrangement 14-19 I Service rating 19 Number of contacts 20 Contact size 16-8 II 8 16 A R i M d Y L c X K U F V W J G H 20-27 I 27 20 D E W j 14-5 II 5 16 20-41 I 41 20 L V G C M D U a 14-14 H E N D U B S V T U H G 22-21 II 21 16 5 C D E F n m k R X J T S R z j P i N h AA GG y x g M FF w f p BB HH EE K q CC DD u v e L W s Y Z a t c E F 14-18 I 18 20 A J N S H G b K Y D F J g X e W d V G P a f E N H 24-31 I 31 16 E F b S E t V C D U T FF r EE q DD R NN JJ LL CC n P m N KK MM k M BB C d w e x PP p S B c GG HH s A b v u X W Q c T F Z a Y B R U G D 20-16 II 16 16 A Z C P R H K B M J D Y X E F G M H 22-55 I 55 20 g D G C W C P R F K B V f L L C d J A h Z X r B U S 18-32 I 32 20 A V T U b j a 18-11 II 11 16 A P W M E 16-26 I 26 20 M P N F G H H 14-15 I 1 14 16 20 S e d c R C L F K J G E W X D N M T L B K D V J E G 14-14 I 14 20 C P F A H K N J D E 14-12 I 4 8 16 20 C U c Y F K R A L B M K C N M D B T b Z L L H 12-4 II 4 16 L A B R C J A R S P N T 12-3 II 3 16 G B S A X k F C E A R BC Y D Z E T s m h a t S F n r b R g p G q f c P H e d J N M L K V b R 16-23 I 1 22 16 20 U C T Z N Insert arrangement Service rating Number of contacts Contact size B S a P D K P Z W D E M K P Y M C R M N J B C L A K B J B 12-14 I 14 20 N B P E 12-4 D 10-8 I 8 20 A G A H J 12-12 I 12 20 A A D M N Insert arrangement 12-8 I Service rating 8 Number of contacts 20 Contact size N J D E F M K L L E D B E 10-7 I 7 20 H C F D 10-6 I 6 20 10-2 II 2 16 A C C F D 20 A B H G C E C B A A F E H C B D B C J B 8-98 I 3 20 A B G E D 8-4 I 4 20 G F A F B A C B Insert arrangement Service rating Number of contacts Contact size B + C A F A + B 16 y z D f E g F G h AA H i J j L 24-61 I 61 20 K onnector Styles Wall Mounting Receptacles L C D Y G F B E Without termination assemblies Shell size B C D All dimensions in mm F E Dia G Dia L Y Dia X threads in inches 8 1.58 20.75 15.09 3.05 11.30 11.02 24.84 12.02 10 1.58 23.93 18.26 3.05 11.30 14.17 24.84 14.99 9/16-24 NEF 12 1.58 26.32 20.63 3.05 11.30 17.35 24.84 19.05 11/16-24 NEF 14 1.58 28.70 23.10 3.05 11.30 20.52 24.84 22.23 13/16-20 UNEF 16 1.58 31.07 24.61 3.05 11.30 23.70 24.84 25.40 15/16-20 UNEF 18 1.58 33.45 26.58 3.05 11.30 26.85 24.84 28.58 1 1/16-18 NEF 20 2.03 36.63 29.36 3.05 14.10 30.02 26.62 31.75 1 3/16-18 NEF 22 2.03 39.80 31.75 3.05 14.10 30.02 26.62 34.93 1 5/16-18 NEF 24 2.03 42.98 34.93 3.74 14.99 36.37 26.62 38.10 1 7/16-18 NEF L L Style 10E Z G Style 10A Style 10J Style 10F With termination assemblies Style 10A G L G L Shell size 7/16-28 UNEF Serrations / antirotation feature is not provided on shells for 10A, 10E and 10F styles. H Note: G C 10PHM/EGM All dimensions in mm Style 10E Style 10F Style 10J For cable size L Z Dia min max 8 14.25 41.25 M thread in inches 1/2-28 UNEF 10 17.43 41.25 5/8-24 NEF 12 20.60 41.25 3/4-20 UNEF 20.60 32.54 25.81 7.93 44.76 20.80 49.45 8.59 11.23 14 23.78 41.25 7/8-20 UNEF 23.78 32.54 28.98 9.58 44.10 23.78 54.54 10.57 13.69 16 26.98 41.25 1-20 UNEF 26.98 32.54 30.56 12.70 47.65 26.98 59.61 13.97 15.65 18 30.12 41.25 1 3/16-18 NEF 30.12 32.54 36.22 15.87 47.65 30.12 64.70 15.24 17.07 20 33.30 42.85 1 3/16-18 NEF 33.30 35.13 36.22 15.87 53.80 33.30 71.91 16.13 18.98 22 36.47 42.85 1 7/16-18 NEF 36.47 35.13 39.80 19.05 53.80 36.47 76.99 17.02 21.49 24 39.65 43.94 1 7/16-18 NEF 39.65 35.13 44.07 30.32 57.15 39.65 78.08 18.80 22.71 G Dia L G Dia L G Dia H Dia L G Dia 14.25 32.54 21.03 3.96 44.76 14.25 46.89 4.28 5.84 17.43 32.54 22.63 4.78 44.76 17.43 46.89 5.21 7.93 6 onnector Styles Box Mounting Receptacles L L C F Y G Y G F K J B D E H A Style 12E solder B A Style 12E(219) film wire terminations All dimensions in mm Shell B C D E size F G Dia Y Dia Dia 12.02 14.99 19.05 22.23 25.40 28.58 Style 12E A L 20.32 20.32 20.32 20.32 20.32 20.32 24.84 24.84 24.84 24.84 24.84 24.84 Style 12E(219) H A K J min max L min max 8 10 12 14 16 18 1.58 1.58 1.58 1.58 1.58 1.58 20.75 23.93 26.32 28.70 31.07 33.45 15.09 18.26 20.63 23.10 24.61 26.58 3.05 3.05 3.05 3.05 3.05 3.05 11.30 11.30 11.30 11.30 11.30 11.30 11.02 14.17 17.35 20.52 23.70 26.85 20.32 20.32 20.32 20.32 20.32 20.32 4.22 4.22 4.22 4.22 4.22 4.22 5.03 5.03 5.03 5.03 5.03 5.03 2.26 2.26 2.26 2.26 2.26 2.26 0.70 0.70 0.70 0.70 0.70 0.70 0.76 0.76 0.76 0.76 0.76 0.76 24.95 24.95 24.95 24.95 24.95 24.95 20 22 24 2.03 2.03 2.03 36.63 29.36 39.80 31.75 42.98 34.93 3.05 3.05 3.74 14.10 14.10 14.99 30.02 31.75 22.23 26.62 22.23 30.02 34.93 22.23 26.62 22.23 36.37 38.10 22.23 26.62 22.23 3.89 3.89 3.89 4.70 4.70 4.70 1.93 1.93 1.93 0.70 0.70 0.70 0.76 0.76 0.76 26.85 26.85 26.85 Mounting data Panel cutouts Wall mounting receptacles L D E F Y G C R K J B H S A Style 12E(220) film wire terminations All dimensions in mm All dimensions in mm Shell size 8 10 12 14 16 18 20 22 24 Note: A 20.32 20.32 20.32 20.32 20.32 20.32 22.23 22.23 22.23 J H min 7.95 7.95 7.95 7.95 7.95 7.95 7.95 7.95 7.95 max 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 4.60 4.60 4.60 4.60 4.60 4.60 4.60 4.60 4.60 L K min 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 max 0.76 0.76 0.76 0.76 0.76 0.76 0.76 0.76 0.76 28.32 28.32 28.32 28.32 28.32 28.32 30.23 30.23 30.23 Shell size 8 10 12 14 16 18 20 22 24 D 15.09 18.29 20.75 23.11 24.64 26.92 29.46 31.75 35.05 E Dia 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05 R Dia 14.42 17.53 21.84 25.15 28.19 31.49 35.54 37.85 41.15 S 31.73 34.52 38.89 42.06 45.24 48.03 51.59 52.76 57.84 Style 220 is also available for 57A type receptacles with similar termination dimensions as 12E(220) style shown above. 7 onnector Styles Jam Nut Receptacles L L F K M Y M F K Y C D B J X B X H Style 57A solder Style 57A(219) film wire terminators Without termination assemblies B Shell size Min. All dimensions in mm H F D C Max. Min. J Max. K Panel Thickness Min. 8 2.97 23.93 10 2.97 27.10 31.88 L Style 57A (219) L Style 57A Max. Y Dia. M Dia. X Thread in inches 0.70 0.70 0.76 17.93 3.38 4.40 19.05 1.58 3.18 24.84 24.84 13.39 12.03 9/16-24 NEF 0.76 17.93 3.38 4.40 22.23 1.58 3.18 24.84 24.84 16.56 14.99 1/16-24 NEF 0.70 17.93 3.38 1.58 3.18 24.84 24.84 20.70 19.05 7/8-20 UNEF 3.38 4.40 4.40 26.98 17.93 1.58 3.18 24.84 24.84 23.85 22.23 1-20 UNEF 12 2.97 14 2.97 35.05 0.70 0.76 0.76 16 0.70 0.76 17.93 3.38 4.40 30.15 33.32 1.58 3.18 24.84 24.84 27.00 25.40 1 1/8-18 NEF 4.40 36.50 1.58 3.18 24.84 24.84 30.18 28.58 1 1/4-18 NEF 4.40 4.40 38.68 6.35 26.62 30.35 33.35 31.75 1 3/8-18 NEF 42.85 1.58 1.58 6.35 26.62 30.35 36.53 34.93 1 3.38 4.40 46.05 1.58 6.35 26.62 30.35 39.70 38.10 1 5/8-18 NEF 2.97 38.23 18 2.97 41.40 0.70 20 3.76 46.15 0.70 0.76 0.76 22 3.76 49.33 0.70 0.76 17.932 3.38 22.71 3.38 22.71 3.38 24 3.76 52.50 0.70 0.76 23.55 L Mounting data F Panel cutouts K Y M S G Z S C B X R Style 14E With termination assemblies Shell size All dimensions in mm G Dia. L Shell size N R Dia. S 31.75 8 18.11 34.14 8 13.72 14.53 10 21.29 34.14 10 16.89 17.70 34.52 12 24.46 34.14 12 21.03 22.48 38.89 42.06 14 27.63 34.14 14 24.18 25.65 16 30.81 34.14 16 27.33 28.83 45.24 18 33.98 34.14 18 30.50 32.00 48.03 20 37.16 40.03 20 33.68 35.18 51.59 22 40.33 40.03 22 36.86 38.35 54.76 24 43.51 40.87 24 40.03 41.45 57.84 8 C onnector Styles Jam Nut Receptacles R N S C sq A Max. N K G Y 62 IN - 57T Single hole mounting with threaded shell to accept accessories Shell Size 08 10 12 12 16 18 20 22 24 A B max +0.05 (+0.13) 0.978 24.84 0.978 24.84 0.978 24.84 0.978 24.84 0.978 24.84 0.978 24.84 1.048 26.62 1.048 26.62 1.048 26.62 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.148 3.76 0.148 3.76 0.148 3.76 C F G max +0.005 Dia. sq. (+0.13) Max. 0.942 23.93 1.067 27.10 1.255 31.88 1.380 35.05 1.505 38.23 1.630 41.40 1.817 46.15 1.942 49.33 2.067 52.50 0.595 15.12 0.595 15.12 0.595 15.12 0.595 15.12 0.595 15.12 1.595 15.12 0720 18.29 0720 18.29 0.753 19.13 0.426 10.82 0.552 14.02 0.677 17.20 0.802 20.37 0.927 23.55 1.052 26.72 1.167 29.65 1.292 32.82 1.416 35.97 K L min Max 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.125 3.58 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.250 6.35 0.250 6.35 0.250 6.35 M N Y X -0.005 (-0.13) 0.750 19.05 0.875 22.23 1.062 26.98 1.187 30.15 1.312 33.32 1.437 36.50 1.562 38.68 1.687 42.85 1.812 46.05 Thread 0.527 13.3 0.652 16.56 0.825 20.70 0.939 23.85 1.063 27.00 1.188 30.18 1.313 33.35 1.438 36.53 1.563 39.70 7/16 - UNEF 0.473 12.03 9/16 - UNEF 0.590 14.99 11/16 - UNEF 0.750 19.05 13/16 - UNEF 0.875 22.23 1.000 25.40 15/16 - UNEF 1.125 28.58 1.3/16 - UNEF 1.250 31.75 1.5/16 - UNEF 1.375 34.93 1.7/16 - UNEF 1.500 38.10 9/16-24 NEF 11/16-24 NEF 7/8-20 UNEF 1-20 UNEF 1.1/18-18 NEF 1.1/4-18 NEF 1.3/8-18 NEF 1.1/2-18 NEF 1.5/8-18 NEF A max. K 62 IN - 14F Single hole mounting with grommet and grommet nut fitted with integral strain relief clamp has panel `O' ring seal 08 10 12 14 16 18 20 22 24 B C F +0.05 max +0.005 max (+0.13) sq, (+0.13) 1.762 44.75 1.762 44.75 1.762 44.75 1.876 47.65 1.876 47.65 1.876 47.65 2.118 53.8 2.118 53.8 2.250 57.15 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.148 3.76 0.148 3.76 0.148 3.76 0.942 23.93 0.067 27.10 1.255 31.88 1.380 35.05 1.505 38.23 1.630 41.40 1.817 46.15 1.942 49.33 2.067 52.50 0.706 17.93 0.706 17.93 0.706 17.93 0.706 17.93 0.706 17.93 0.706 17.93 0.894 22.71 0.894 22.71 0.927 23.55 G H dia +0.005 max (+0.13) 0.828 21.03 0.891 22.63 1.016 25.81 1.141 28.97 1.203 30.56 1.426 36.22 1.426 36.22 1.567 39.80 1735 44.07 0.156 3.96 0.188 4.78 0.312 7.93 0.375 9.35 0.500 12.7 0.625 15.88 0.625 15.88 0.750 19.05 0.800 20.32 K L min max 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.750 19.50 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.175 0.250 6.35 0.250 6.35 0.250 6.35 9 M N max. S Y 1.250 31.75 1.359 34.52 1.531 38.89 1.656 42.06 1.781 45.24 1.891 48.03 2.031 51.59 2.156 54.76 2.277 57.84 0.473 12.03 0.590 14.99 0.750 19.05 0.875 22.23 1.000 25.40 1.125 28.58 1.250 31.75 1.375 34.93 1.500 38.10 -0.005 +0.005 +0.005 (-0.13) (+0.13) (+0.13) 0.125 3.175 0.875 22.23 1.062 26.98 1.187 30.15 1.312 33.32 1.437 36.50 1.562 38.68 1.687 42.85 1.812 46.05 0.527 13.3 0.652 16.56 0.815 20.70 0.939 23.85 1.063 27.00 1.188 30.18 1.313 33.35 1.438 36.53 1.563 39.70 0.540 1372 0.665 16.89 0.828 21.03 0.952 24.18 1.076 27.33 1.201 30.50 1.326 33.68 1.451 36.86 1.576 40.03 F B R 0.572 14.53 0.697 17.70 0.885 22.48 1.010 25.65 1.135 28.83 1.260 32.00 1.385 35.18 1.510 38.35 1.635 41.45 X M Y G H O/all rear dia. L A M All dimensions in mm C sq Shell Size X F B L A/F X Thread 9/16-24 NEF 11/16-124 NEF 7/8-20 UNEF 1-20 UNEF 1.1/8-18 NEF 1.1/4-18 NEF 1.3/8-18 NEF 1.1/2-18 NEF 1.5/8-18 NEF C onnector Styles Cable Mounting Receptacles L C F B X Without termination assemblies Shell size B All dimensions in mm C L F Y X thread in inches Dia 8 2.39 10.54 10.54 12.03 7/16-28 UNEF 2.39 20.75 23.93 24.84 10 24.84 14.99 9/16-24 NEF 12 2.39 26.32 10.54 24.84 19.05 11/16-24 NEF 14 2.39 28.70 10.54 24.84 22.23 13/16-20 UNEF 15/16-20 UNEF 16 2.39 31.07 10.54 24.84 25.40 18 2.39 33.45 10.54 24.84 28.58 1 1/16-18 NEF 20 2.59 36.63 13.59 26.62 31.75 1 3/16-18 NEF 22 2.59 39.80 13.59 26.62 34.93 1 5/16-18 NEF 24 2.59 42.98 14.53 26.62 38.10 1 7/16-18 NEF G Z H G L G L L G L M Style 11A Style 11E Style 11F Style 11J 11PHM/EGM With termination assemblies Style 11A All dimensions in mm Style 11E Style 11F Style 11J Shell size G Dia L M thread in inches G Dia L G Dia H Dia L G Dia L 8 10 12 14 16 18 20 22 24 14.25 41 .25 32 .54 21.03 3.9 6 44.76 14.25 46.89 4.2 8 41.25 1/ 2-28 UNEF 5/ 8-2 4 NEF 14 .25 17.43 17 .43 32 .54 22 .63 4.7 8 44 .76 17 .43 46.89 5.2 1 7.9 3 20.60 41.25 3/ 4-2 0 UNEF 20.60 32.54 25.81 7.9 3 44 .76 20.60 49.45 8.5 9 11 .23 23.78 41.25 32.54 28.97 9.5 3 44 .10 23.78 54.54 10.57 13 .69 41.25 7/ 8-2 0 UNEF 1-20 UNEF 23.78 26.95 26 .95 32 .54 30 .56 12.70 47.65 26 .95 59 .61 13 .97 15.65 30.13 41.25 30 .13 32 .54 36 .22 15.88 47.65 30 .13 64 .70 15.24 17 .07 33.30 42.85 1 3/16-18 NEF 1 3/16-18 NEF 33 .30 35 .13 36 .22 15.88 53.80 33 .30 71 .91 16.13 18 .98 36.75 42.85 36 .75 35 .13 39 .80 19.05 53.80 36 .75 76 .99 17.02 21 .49 39.65 43.95 1 7/16-18 NEF 1 7/16-18 NEF 39 .65 35 .13 44 .07 20.32 57.15 39 .65 78 .03 18.80 22 .71 10 For cable size Z Dia 5.84 C onnector Styles 16 L C X Without termination assemblies size C Dia L X in inches 8 19.05 24.79 7/16-28 UNEF 10 21.82 24.79 9/16-24NEF 12 26.19 24.79 11/16-24 NEF 14 29.36 24.79 13/16-20 UNEF 16 32.54 24.79 15/16-20 UNEF 18 35.33 24.79 11/16-18 NEF 20 38.89 26.79 1 3/16-18 NEF 22 42.06 26.79 1 5/16-18 NEF 24 45.14 26.79 1 7/16-18 NEF L Z G G G L H L L G Shell All dimensions in mm M Style 16A Style 16E Style 16F Style 16J 16PHM/EGM With termination assemblies Shell size G Style 16 A M L Dia Thread In Inches Style 16 E L G Dia G Dia Style 16 F H L Dia G Dia Style 16 J For cable size L Z Dia min max 4.28 5.84 1/2-28 UNEF 14.25 32.54 21.03 3.96 44.50 14.25 46.64 17.43 32.54 22.63 4.78 44.50 17.43 46.64 5.21 7.93 3/4-20 UNEF 20.60 32.54 25.81 7.93 44.50 20.60 49.20 8.59 11.23 8 14.25 41.00 10 17.43 41.00 12 20.60 41.00 7/8-20 UNEF 23.78 32.54 28.97 5/8-24 NEF 14 23.78 41.00 9.53 43.84 23.78 54.28 10.57 13.69 16 26.95 41.00 26.95 32.54 30.56 12.70 47.40 26.95 59.36 13.97 15.65 18 30.13 41.00 1 3/16-18 NEF 30.13 32.54 36.22 15.88 47.40 30.13 64.45 15.24 17.07 20 33.30 41.00 1 3/16-18 NEF 33.30 32.54 36.22 15.88 51.81 33.30 70.05 16.13 18.98 22 36.75 41.00 1 7/16-18 NEF 36.75 32.54 39.80 19.05 39.61 42.11 1 7/16-18 NEF 39.61 32.54 44.07 20.32 51.81 36.75 75.13 17.02 21.49 55.32 39.61 76.25 18.80 22.71 24 1-20 UNEF Notes: 1. Plugs are also available with heavy duty ribbed coupling ring, to order, add deviation (044) at the end of plug part number. 11 ust Covers Metallic Dust Covers Standard is olive drab chromate finish over cadmium plating with straight knurling. To order add suffix -XX to required style, where XX specifies shell size. It is strongly recommended that these are fitted to provide protection when connectors are not in use. For alternate finishes or dust covers with heavy duty ribs, contact factory for further details and part number. Dust cap with Nylon cord is also available. Contact factory for further details. For receptacles Dust cover style with chain To fit receptacle style with nylon cord 62IN-736 62IN-813 Jam nut 62IN-737 62IN-814 Cable mounting 62IN-738 62IN-812 Wall and box mounting B C A For plugs Dust cover style with chain with nylon cord 62IN-742 62IN-810 C B D A All dimensions in mm B Shell size A chain / cord length for receptacles for plugs 8 10 12 14 16 18 20 22 24 76.20 76.20 88.90 88.90 88.90 88.90 101.60 101.60 101.60 15.21 15.21 15.21 15.21 15.21 15.21 15.21 15.21 15.21 15.03 15.03 15.03 15.03 15.03 15.03 15.03 15.03 15.03 12 C Dia 736 813 J Dia 737 814 18.64 21.82 25.40 28.57 31.75 34.92 38.10 41.27 44.45 14.68 17.86 22.63 25.81 29.39 32.16 35.33 38.51 41.68 11.63 14.81 17.98 22.76 25.93 29.11 32.28 35.46 38.63 738 812 742 810 4.40 4.40 4.40 4.40 4.40 4.40 4.40 4.40 4.40 A ccessories Strain Relief Clamp With Grommet (Replace XX-XX with the required insert arrangement) 62IN-585-XX-XXS or XXP A G H All dimensions in mm Shell size A max G max H max 8 25.17 21.03 4.09 10 25.17 22.63 4.90 12 25.17 25.81 8.05 14 24.51 28.98 9.65 16 28.07 30.56 12.83 18 28.07 36.22 16.00 20 32.64 36.22 16.00 22 32.64 39.80 19.18 24 34.88 44.07 20.45 Shell To Accept Conduit (Replace XX with the required shell size) 62IN-776-XX A M All dimensions in mm Shell size A max M Thread in inches 8 23.80 1/2-28 UNEF 10 23.80 5/8-24 NEF 12 23.80 3/4-20 UNEF 14 23.80 7/8-20 UNEF 16 23.80 1-20 UNEF 18 23.80 1 3/16-18 NEF 20 23.80 1 3/16-18 NEF 22 23.80 1 7/16-18 NEF 24 23.80 1 7/16-18 NEF 13 ccessories 62IN - SQ Adaptors L Ink Mark A Conn. No. & Batch Code As Per Bom. For Shielded Cables 3.5 `SW' C THD. D G V Knurled Nut Coupling Nut SIZE AT'X P/NO. Retainer Ring `V' THD. UNEF-2B C L D G MIN. MAX. +0.5 -0.0 MAX. Cable Housing SW -0.2 RECOMME NDED TORQUE'S (Nm) 08 62IN-08-SQ 7/16 -28 6.6 20 16 36 18 4 +0.50 10 62IN-10-SQ 9/16 -24 9.2 23 18 36 21 6 +0.50 12 62IN-12-SQ 11/16 -24 12.2 27 22 36 24 8+1.0 - 14 62IN-14-SQ 13/16 -20 15.2 30 25 37 28 16 62IN-16-SQ 15/16 -20 18.3 33 28 31 18 62IN-18-SQ 1 1/16 -18 20.0 36 32 34 20 62IN-20-SQ 1 3/16 -18 23.0 40 34 37 22 62IN-22-SQ 1 5/16 -18 26.0 43 38 41 24 62IN-24-SQ 1 7/16 -18 28.8 46 41 37 10+1.0 - 13+1.0 - 44 62IN - Shrink Boot Adaptors F 3.5 D C `V' Thread B Chamfer G H E 0.50 X 45 M For Unshielded Cables A A `X' SIZE ATX P/NO `A' `B' -0.3 `C' `D' `E' `V' THREAD. `M' -0.2 +0.2 +0.5 UNEF -2B +0.1 7/16 -28 10.2 9/16 -24 13.3 11/16 -24 16.5 13/16 -20 19.5 08 62IN-108559 15.4 14.0 13.1 9.2 15.1 10 62IN-108560 18.6 17.0 15.9 12.1 17.9 12 62IN-108561 21.8 20.3 21.2 15.1 23.2 14 62IN-108562 25.0 23.3 22.1 18.4 24.0 `F' `G' `H' 17.5 5.50 4.50 16 62IN-108563 28.2 26.4 26.0 21.6 29.3 20.0 15/16 -20 22.6 18 62IN-108564 31.3 29.5 28.4 24.1 31.5 20.0 1 1/16 -18 25.6 20 62IN-108565 34.5 32.7 32.3 27.3 35.6 21.3 1 3/16 -18 28.8 22 62IN-108566 37.7 35.8 34.7 30.5 38.0 21.3 1 5/16 -18 32.0 24 62IN-108567 40.9 39.0 37.9 33.7 41.0 20.0 1 7/16 -18 35.2 14 5.00 4.00 ccessories Flange Mounting Gasket 62IN-760-XX (Replace XX with the required shell size) D Sq H F G E All dimensions in mm Shell D E F Dia G Dia H size max 8 20.62 15.08 12.90 3.30 1.06 10 23.82 18.26 16.07 3.30 1.06 12 26.18 20.65 19.25 3.30 1.06 14 28.57 23.01 22.42 3.30 1.06 16 30.96 24.61 25.60 3.30 1.06 18 33.32 27.00 28.77 3.30 1.06 20 36.52 29.36 31.95 3.30 1.06 22 39.70 31.75 35.13 3.30 1.06 24 42.87 34.92 38.30 3.96 1.06 PG Adaptors with `O' ring PG X A B A L All dimensions in mm Part number For shell size X Thread in inches A B L PG Thread 62IN08-PG7 8 7/16-28 UNEF 16.50 14.50 20.00 PG7 62IN10-PG9 10 9/16-24 NEF 22.00 17.70 20.00 PG9 62IN12-PG9 12 11/16-24 NEF 22.00 21.00 20.00 PG9 62IN14-PG13.5 14 13/16-20UNEF 28.00 23.50 25.00 PG13.5 62IN16-PG9 16 15/16-20 U NEF 29.00 27.80 30.00 PG 9 62IN18-PG16 18 1/16 -18 NEF 31 .50 31.00 35 .00 PG16 62IN20-PG21 20 13/16-18 NEF 35 .00 34.00 40.00 Pg21 62IN24-PG16 24 17/16-18 NEF 41.50 40.50 40.00 PG16 15 B ack-Shell EGM/PHM Adaptor "E" Thread Cable Size *Metal Sleeve "C" *EGM - Supplied with metal sleeve for shielded cable PHM - Supplied without metal sleeve for unshielded cable Shell size "C" Ref. 8 10 12 30.00 14 16 18 20 22 24 35.00 PG Size (Cable Size in mm) "E" Thread For Straight PG 11 (4 to 10) 7/16" -28 UNEF PG 11 (4 to 10) PG 11 (4 to 10) PG 21 (11 to 18) PG 21 (11 to 18) PG 21 (11 to 18) PG 21 (11 to 18) PG 21 (11 to 18) PG 21 (11 to 18) EGM/PHM11 Can accept cable Min 5.70 mm & Max 10.85 mm EGM/PHM21 Can accept cable Min 12.70 mm & Max 17.85 mm 16 9/16" -24 NEF 11/16" -24 NEF 13/16" -20 UNEF 15/16" -20 UNEF 1 1/16" -20 UNEF 1 3/16" -18 UNEF 1 5/16" -18 NEF 1 7/16" -18 UNEF B ack-Shell Shrink Boot Adaptor `V' THREAD `A' 3.56/3.50 `D' `B' 10.80 MAX. INK MARK A CONN. NO. AS PER BOM. 28.58 MAX. A B MAX. MIN. C + 0.0 - 0.51 08 15.67 6.35 10 18.64 12 21.79 SHELL SIZE `C' D + 0.20 - 0.0 `V' THREAD UNEF-2B CONNECTORS P/NO. 13.54 7 / 16" -28 M85049 / 60-1-W-8-IN 9.02 15.37 9 / 16" -24 M85049 / 60-1-W-10-IN 12.47 19.66 11 / 16" -24 M85049 / 60-1-W-12-IN 1.12 14 24.99 14.35 21.29 13 / 16" -20 M85049 / 60-1-W-14-IN 16 28.24 17.53 24.46 15 / 16" -20 M85049 / 60-1-W-16-IN 18 30.94 19.53 26.47 1 1 / 16" -18 M85049 / 60-1-W-18 20 34.16 22.71 30.91 1 3 / 16" -18 M85049 / 60-1-W-20 22 32.79 25.88 34.42 1 5 / 16" -18 M85049 / 60-1-W-22 24 40.46 28.80 36.65 1 7 / 16" -18 M85049 / 60-1-W-24 1.75 17 ack-Shell L A Right Angle Backshell B `C' DRG. No. A MAX. +- 0.13 B `C' -2A THREAD. L MAX. 8 500238-8 18.85 7.30 9/16"-24NEF 20.80 10 500238-10 21.70 10.18 5/8"-24UNEF 21.70 12 500238-12 24.60 13.35 3/4"-20UNEF 23.35 14 500238-14 27.85 16.26 7/8"=20UNEF 24.85 16 500238-16 31.2. 19.40 1"-20UNEF 26.45 18 500238-18 34.15 22.00 20 500238-20 37.25 24.20 22 500238-22 40.65 28.50 24 500238-24 44.00 31.65 Shell Size 28.70 1 3/16"-18UNEF 29.60 31.60 1 7/16"-18NEF 33.60 JC Clamp Backshell `L' c `B' `A' B D Shell Size B A C MAX. D MAX Closed `L' MIN. MAX. +-0.13 8 4.28 5.84 3.96 21.03 10 5.21 7.93 4.78 22.63 12 8.59 11.23 7.93 25.81 7.14 14 10.57 13.69 9.58 28.97 8.26 48.00 16 13.97 15.65 12.70 30.56 9.04 54.50 18 15.24 17.07 15.88 36.22 11.58 59.00 20 16.13 18.98 15.88 36.22 22 17.02 21.49 19.05 39.80 24 18.80 22.71 20.32 44.07 18 4.75 MAX. 40.50 67.00 13.18 16.69 73.40 77.00 S pecials and Deviations Industrial Version Crimp Contacts 62IN series connectors are also available with rear release crimp contacts for industrial applications. These contacts can be crimped to wires outside the connector and then inserted into place with the help of designated tools. Connector maintenance is simplified because damaged contacts can be removed by using the designated removal tool and replaced with a new contact. Spare contacts are also available. Standard deviations for finishes & features Deviation number Description (4) Gold flash on contacts (5) Crim p contact (044) Rough grip heavy duty coupling ring (for plugs only) (218) Coupling ring w i t h lever arrangement (219) Film w i r e termination (short) for flexible printed w i r i n g (57A and 12E styles only) (220) Film w i r e termination(long) for flexible printed w i r i n g (57A and 12E styles only) (416) Electroless Nickel Plating *(608) Black anodised finish (622) Cadmium free zinc-cobalt Plating-olive drab finish (624) Cadmium free zinc-cobalt Plating-black finish (0PX) Premating contact (X denotes premating contact designation) (714) Cadmium over electroless Nickel (720) Cadmium plating with black chromate (725) (726) Zinc plating with olive drab finish Electrophoratic Finish (56T) Plug connector with threaded shell & serration to accept the cable accessories (15A) Plug connector with threaded shell to accept the cable accessories (LC) Less contact (N00) Connector without marking (N01) Connector with customer requested marking C04:-Crimp connectors with few solder contact (Position need to mention) Specials For special requirements, please contact factory with specifications and drawings. Amphenol has in-house capability to meet and custom build your special requirements for its range of MIL-C-26482 62IN series connectors. * Consult factory for availability. Recommended Tightening Torques A) Single hole Fixing Receptacle ( Panel Nut tightening) 8 10 12 14 16 18 20 22 24 3.73 4.07 6.78 7.34 8.25 9.26 11.98 13.9 15.03 33 36 60 65 73 82 106 123 133 Shell Size Nm Lbf.ins B) Accessory Tightening 8 Shell Size 10 3.79-3.96 3.96-4.52 Nm 25-40 Lbf.ins 12 14 16 18 4.52-5.09 5.09-5.65 5.65-6.78 6.78-7.91 40-45 45-50 55-60 65-70 35-40 Crimping Tool MILITARY P/N DMC P/N DESCRIPTION Tool Frame M22520/1-01 Af8 Turret M22520/1-02 TH1A Insertion & Removal Tool Contact size 20 Insertion Removal Tool Part Number 62IN-IR-20 16 62IN-IR-16 19 20 22 24 8.48-9.04 9.61-10.17 10.74-11.3 75-80 85-90 95-100 O rdering 62IN Series Connectors To obtain a specific connector number, write down the connector number from the typical example below. Only inserts shown on page 5 can be specified. Connectors are delivered with protective dust caps. Deviations specified on page 15 must be included at the end of the connector number whenever required. 62IN 5 7 E - 18 - 32 P X Series designation 62IN - MIL -C-26482 series I miniature bayonet lock Deviations See page 19 Key specification 1 - as per MIL-C-26482 5 - as per BS 9522 F0017 Orientation Inserts W-X-Y-Z (Omit for normal) OR Key / Keyway B-C-E-F See pages 3 and 4. Shell style 0 1 - Wall mounting receptacle Cable connecting receptacle 2 4 - Box mounting receptacle Jam nut receptacle, Internally threaded with Cable accessories 5 - Plug without back accessories 6 7 - 8 - Plug Jam nut receptacle, plain Shell Right Angle Back Shell with cable clamp (less grommet) Contact style P - Pin contacts S - Socket contacts Connector class AE- F- Same as E, but grommet nut With strain relief clamp. J- Same as E, but with resilient Gland seal and nut for Unscreened jacketed cable, No grommet. T- Threaded shell for cable Accessories, exposed solder Buckets. TG - Same as T, but shell has Grounding fingers. PG - Plug with straight PG threaded Backshell Supplied with different diameter sleeves to suit varying cable sizes. Used for unshielded cables Supplied with different diameter sleeves to suit varying cable sizes. Used for shielded cables Used for shielded cables Used for unshielded cables PHM EGM - SQ SB - Insert arrangement Plain shell, exposed solder Buckets, no grommet. Insert and grommet with Grommet nut (excluding 12E Which has plain shell and no Grommet or grommet nut). First box indicates shell size 8, 10, 12, 14, 16, 18, 20, 22, 24. Both boxes together indicate the exact insert arrangement. See page 5. Shell finish (Deviations) Standard-Cadmium plating with olive drab chromate finish Alternate finishes 1. Cadmium free zinccobalt plating with olive drab chromate finish Ref page No. 19 for codes For details contact factory Notice: All information, including illustrations given herein is believed to be accurate at the time of printing. In lieu of design advances, Amphenol reserves the right to change specifications without notice. This publication AC6201 03/13 supersedes all existing Amphenol literature on 62IN series connectors. 20 Bangalore Operations Pune Operations Our offices in India: MARKETING HEADQUARTERS Southern Region Northern and Eastern Region 105, Bhosari Industrial Area, Pune - 411 026. Tel.: 91-20-30688303, 30688304 Fax : 91-20-30688321 Email : vbhavsar@amphenol-in.com sales@amphenol-in.com 4931, 11th Floor, High Point IV 45, Palace Road, Bangalore 560 001. Tel.: 91-80-22281392, 22281002 Fax : 91-80-22253859 Email : kmanoj@amphenol-in.com 1414, 14th Floor, Chiranjiv Tower, 43, Nehru Place, New Delhi - 110 019. Tel. : 91-11-26449177 Telefax : 91-11-26449176 Email : sunily@amphenol-in.com Export Western Region Central Region 105, Bhosari Industrial Area, Pune - 411 026, India. Tel.: 91-20-30688305, 30688353 Fax : 91-20-27129158 Email : svpatil@amphenol-in.com 105, Bhosari Industrial Area, Pune - 411 026. Tel.: 91-20-27119735, 30688334 Fax: 91-20-27120581, 27119735 Email : sunilp@amphenol-in.com 107, 1st Floor, `Am Sri Classic', Sarojinidevi Road, Secunderabad - 500 003. Telefax : 91-40-66332906 Email : pprasad@amphenol-in.com www.amphenol-in.com