KEMET Organic Capacitor (KO-CAP(R)) T52X/T530 Polymer Electrolytic Capacitors Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable of delivering very low ESR and improved capacitance retention at high frequencies. KO-CAP combines the low ESR of multilayer ceramic, the high capacitance of aluminum electrolytic, and the volumetric efficiency of tantalum into a single surface mount package. Unlike liquid electrolyte-based capacitors, KO-CAP has a very long operational life and high ripple current capabilities. The T52X/T530 provides the widest range of voltages, capacitance and case size options in the KO-CAP family and is suitable for general purpose DC applications for up to 48 volt DC voltage rails. Benefits * * * * * * * * * ESR values down to 5 m Stable capacitance across temperature and voltage No aging effects High ripple handling Volumetrically efficient High frequency capacitance retention 100% accelerated steady state aging 100% surge current tested Halogen-free epoxy and RoHS compliant Applications Typical applications include DC/DC converters, audio/sound circuits (mobile phone and base stations, smart phones, MP3 players), power supply inputs, portable electronics (notebook PCs, displays, SSDs, HDDs and USBs, digital cameras, GPS navigation systems, WiFi modules), telecommunications, consumer electronics (analytical and test equipment, high speed servers), high voltage applications such as 12 V to 48 V power input rails, densely populated circuits with space restrictions, microprocessor decoupling, and high ripple current applications. One world. One KEMET (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 1 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Environmental Compliance * RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn, Ni-Pd-Au or non-magnetic 100% Sn solder * Halogen-free * Epoxy compliant with UL94 V-0 K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET's K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. Series Reference Selection Series Voltage Range Temperature Rating < 1 V to 9 V Applications 12 V to 48 V Applications 85C Rated 105C Rated X * X** X T520 Standard T521 High Voltage T523 Facedown Terminal X X** T525 High Temperature X * T527 Small Size X T529 Miniature X T530 High Cap/ Low ESR X X X X Special Features 125C Rated Miniature Size Low ESL X X X** X X X X X X X X X * Not recommended for new design. ** Selected values. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 2 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Ordering Information T 520 Capacitor Class Series T= Tantalum V 157 M Case Capacitance Code Capacitance Size1 (pF) Tolerance 520 = Polymer 521 = High voltage 523 = Facedown terminal 525 = 125C rated 527 = Facedown terminal 529 = Substrate terminal 530 = 125C High capacitance A B C D H I J L M P Q T U V W X Y First two digits represent significant figures. Third digit specifies number of zeros. K = 10% M = 20% 006 A T E045 Rated Voltage (VDC) Failure Rate/ Design Termination Finish ESR Code 002 = 2 2R5 = 2.5 003 = 3 004 = 4 006 = 6.3 008 = 8 010 = 10 011 = 11 12R = 12.5 016 = 16 020 = 20 025 = 25 035 = 35 050 = 50 063 = 63 075 = 75 A= N/A T = 100% Matte tin (Sn)-plated H*** = Tin/lead (SnPb) solder coated (5% Pb minimum) P* = Ni-Pd-Au-plated N = Non-magnetic 100% Tin (Sn) M = Non-magnetic (SnPb) A** = Ni-Au E = ESR last three digits specify ESR in m (045 = 45 m) Packaging (C-Spec) Blank = 7" reel 7280**** = 13" reel Gold termination available upon request * P termination only available on select part numbers ** A termination only available on T529 part numbers *** H termination not available for T527/T529 part numbers **** 13" reel not available for T520A case and some other part numbers Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range DF (120 Hz) ESR (100 kHz) Leakage Current -55C to 85C/105C/125C (refer to part number for maximum temperature rating) 4.7 - 1,500 F at 120 Hz/25C K tolerance (10%), M tolerance (20%) 2 - 75 V Refer to Part Number Electrical Specification Table* Refer to Part Number Electrical Specification Table** Refer to Part Number Electrical Specification Table * For T529 Series DF measurement apply 1.5 V DC ** For PN T520B477M2R5ATE014 the ESR measurement should be taken at 300 to 500kHz (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 3 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Qualification Test Condition Characteristics C/C Endurance Temperature: 85C, 105C, 125C** Voltage: 1.0 Rated Voltage 2/3 Rated Voltage for 125C rating PN Time: 2,000 Hours 1,000 Hours for T527/T529*** DF DCL ESR C/C Storage Life Temperature: 105C, 125C** Voltage: 0 Voltage Time: 2,000 Hours (N/A for T527 and T529***) DF DCL ESR C/C Humidity Temperature: 60C Voltage: No Load Humidity: 90% RH Time: 500 Hours, 1,000 Hours (T525, T530) DF DCL ESR +25C Temperature Stability Extreme temperature exposure at a succession of continuous steps at +25C, -55C, +25C, +85C, +105/125C, +25C IL* 20% 30% +50% - 0% of DC/C (T527/29)*** DF IL IL 1.2 x IL 1.5 x IL IL (T529) DCL IL Temperature: 105C, 85C** (T527/T529) Voltage: 1.32 x Rated voltage Time: 1,000 cycles DF DCL ESR Mechanical Shock/Vibration MIL-STD-202, Method 213, Condition I, 100 G Peak. MIL-STD-202, Method 204, Condition D, 10 Hz to 2,000 Hz, 20 G peak Within initial limits Within 1.25 x initial limit T521: 1.25 x IL at 105C, 2x IL at 125C T525/T530: Within 2.0 x initial limit Within 2.0 x initial limit Within -5%/+35% of initial value T527/T529: -20% to +30% of initial DC/C limit T520B477M2R5ATE014: -20% to +50% of initial DC/C limit Within initial limits T527/T529: Within 1.5 x initial limits*** Within 5.0 x initial limit T521/T525/T529/T530: Within 3.0 x initial limit*** T527: Within initial limits Within 2.0 x initial limit T525/T527/T529/T530: N/A*** -55C +85C +105/125C 20% -20% - 0% of DC/C (T527/29)*** C/C C/C Surge Voltage Within -20%/+10% of initial value T527 and T529: Within initial DC/C limits Within initial limits T527 and T529: Within 1.5 x initial limits*** 85C and 105C rated parts: Within 1.25 x initial limit 125C rated parts: Within 2.0 x initial limits T527: Within initial limits T529: Within 3.0 x initial limits Within 2.0 x initial limit (N/A for T527 and T529***) Within -20%/+10% of initial value C/C N/A 10 x IL 10 x IL IL (T529) 1.25 CV (T529) Within -20%/+10% of initial value T527/T529 Series: Within initial DC/C limits Within initial limits Within initial limits Within initial limits T527/T529 Series: N/A Within 10% of initial value Within initial DC/C limits DF Within initial limits DCL Within initial limits *IL = Initial limit **Refer to part number specifications for individual temperature classification. ***This condition/exclusion applies also to PN T520B477M2R5ATE014 (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 4 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Reliability KO-CAP capacitors have an average failure rate of 0.5 %/1,000 hours at category voltage, UC, and category temperature, TC. These capacitors are qualified using industry test standards at UC and TC. The minimum test time (1,000 hours or 2,000 hours) is dependent on the product. The actual life expectancy of KO-CAP capacitors increases when application voltage, UA, and application temperature, TA, are lower than UC and TC. As a general guideline, when UA < 0.9 * UC and TA < 85C, the life expectancy will typically exceed the useful lifetime of most hardware (> 10 years). The lifetime of a KO-CAP capacitor at a specific application voltage and temperature can be modeled using the equations below. A failure is defined as passing enough current to blow a 1-amp fuse. The calculation is an estimation based on empirical results and is not a guarantee. VAF = [ ( TAF = e ( ) UC n UA Ea 1 1 k 273+TA 273+TC )] where: TAF = acceleration factor due to temperature, unitless Ea = activation energy, 1.4 eV where: VAF = acceleration factor due to voltage, unitless UC = category voltage, volt UA = application voltage, volt k = Boltzmann's constant, 8.617E-5 eV/K TA = application temperature, C n = exponent, 16 TC = category temperature, C AF = VAF * TAF LifeU ,T = LifeU ,T * AF A A C C where: where: LifeUA, TA = guaranteed life application voltage and temperature, years AF = acceleration factor, unitless LifeUC, TC = guaranteed life category voltage and temperature, years TAF = accerlation factor due to temperature, unitless VAF = acceleration factor due to voltage, unitless AF = acceleration factor, unitless Terms: Category voltage, UC : maximum recommended peak DC operating voltage for continuous operation at the category temperature, TC Rated voltage, U R : maximum recommended peak DC operating voltage for continuous operation up to the rated temperature, TR Category temperature, TC : maximum recommended operating temperature. Voltage derating may be required at TC Rated temperature, TR : maximum recommended operating temperature without voltage derating. TR is equal to or lower than TC Reliability Table 1 - Common temperature range classifications 85C (TR) / 85C (TC) 105C (TR) / 105C (TC) 105C (TR) / 125C (TC) Rated Voltage (UR) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Category Voltage (UC) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Rated Voltage (TR) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Category Voltage (UC) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Rated Voltage (TR) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Category Voltage (UC) 1.7 2.7 4.2 5.4 6.7 8.4 10.7 13.4 16.8 23.5 33.5 42.2 50.3 (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 5 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Electrical Characteristics T520 Standard (2 V - 10 V) ESR vs. Frequency 1000 T520B157M006ATE035_Imp T520C227M006ATE025_Imp T520V337M006ATE015_Imp T520D337M006ATE009_Imp T520B157M006ATE035_ESR T520C227M006ATE025_ESR T520V337M006ATE015_ESR T520D337M006ATE009_ESR 10 1 0.1 Capacitance (uF) 100 Impedance,ESR (Ohms) Capacitance vs. Frequency 100 10 T520B157M006ATE035 T520C227M006ATE025 T520V337M006ATE015 T520D337M006ATE009 0.01 0.001 100 1,000 10,000 100,000 1,000,000 1 10,000,000 100 1,000 Frequency (Hz) 10,000 100,000 Frequency (Hz) 1,000,000 10,000,000 T521 High Voltage (12 V - 75 V) Capacitance vs. Frequency ESR vs. Frequency 100 1 Capacitance (F) 10 Impedance, ESR (Ohms) 100 T521V476M020ATE055_Imp T521V336M025ATE060_Imp T521V156M035ATE100_Imp T521V476M020ATE055_ESR T521V336M025ATE060_ESR T521V156M035ATE100_ESR 0.1 0.01 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 ESR vs. Frequency 10 1 T521V476M020ATE055 T521V336M025ATE060 T521V156M035ATE100 100 10,000,000 1,000 10,000 100,000 1,000,000 10,000,000 Frequency (Hz) T530 High Cap/Low ESR (2 V - 10 V) Capacitance vs. Frequency 1,000 10 T530D227M006ATE006_Imp T530X477M006ATE004_Imp 1 T530D227M006ATE006_ESR T530Y337M006ATE005_ESR Capacitance (F) Impedance, ESR (Ohms) T530Y337M006ATE005_Imp T530X477M006ATE004_ESR 0.1 100 T530D227M006ATE006 10 T530Y337M006ATE005 T530X477M006ATE004 0.01 0.001 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 10,000,000 (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com 1 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 10,000,000 T2076_T52X-530 * 3/11/2019 6 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Dimensions - Millimeters (Inches) Metric will govern T520/T521/T525/T530 CATHODE (-) END VIEW SIDE VIEW ANODE (+) END VIEW BOTTOM VIEW A B W B Glue pad shape/design at KEMET's option H X T S S P Termination cutout at KEMET's option, either end R L For T520 Series, bevel is at KEMET's option Case Size KEMET A EIA F Component Dimensions L W H 3.2 0.2 1.6 0.2 1.6 0.2 3216-18 (0.126 0.008) (0.063 0.008) (0.063 0.008) F 0.1 (0.004) S 0.3 (0.012) S1 0.4 (0.0157) S2 0.2 (0.00) Typical B 0.15 X P R T A (Ref) 0.006 (Ref) (Ref) (Ref) (Ref) (Min) 0.4 (0.016) 0.4 (0.016) 0.13 (0.005) 1.2 (0.047) 53 1.2 (0.047) 0.8 (0.032) N/A 0.10 0.10 (0.004 0.004) Weight (mg) B 352821 3.5 0.2 (0.138 0.008) 2.8 0.2 (0.110 0.008) 1.9 0.2 (0.075 0.008) 2.2 (0.087) 0.8 (0.032) 0.4 (0.016) 0.10 0.10 (0.004 0.004) 0.5 (0.020) 1.0 (0.039) 0.13 (0.005) 1.9 (0.075) 95 C 603228 6.0 0.3 (0.236 0.012) 3.2 0.3 (0.126 0.012) 2.5 0.3 (0.098 0.012) 2.2 (0.087) 1.30 (0.051) 0.5 (0.020) 0.10 0.10 (0.004 0.004) 0.9 (0.035) 1.0 (0.039) 0.13 (0.005) 2.9 (0.114) 184 D 734331 7.3 0.3 (0.287 0.012) 4.3 0.3 (0.169 0.012) 2.8 0.3 (0.110 0.012) 2.4 (0.094) 1.30 (0.051) 0.5 (0.020) 0.10 0.10 (0.004 0.004) 0.9 (0.035) 1.0 (0.039) 0.13 (0.005) 3.6 (0.142) 435 H 736020 7.3 0.3 6.0 0.3 1.9 0.1 (0.287 0.012) (0.236 0.012) (0.075 0.004) 4.1 (0.161) 1.3 (0.051) N/A 0.10 0.10 (0.004 0.004) N/A N/A 0.13 (0.005) 3.3 (0.130) 385 J 7360-15 7.3 0.3 6.0 0.3 (0.287 0.012) (0.236 0.012) 4.1 (0.161) 1.3 (0.051) N/A 0.10 0.10 (0.004 0.004) N/A N/A N/A 3.3 (0.130) 263 L 6.0 0.3 6032-19 (0.236 0.012) 3.2 0.2 1.8 0.1 (0.110 0.008) (0.071 0.004) 2.2 (0.087) 1.3 (0.051) N/A 0.05 (0.002) N/A N/A 0.13 (0.005) 2.5 (0.098) 187 M 3528-15 3.5 0.2 (0.138 0.008) 2.8 0.2 1.4 0.1 (0.110 0.008) (0.055 0.004) 2.2 (0.087) 0.8 (0.031) N/A 0.05 (0.002) N/A N/A 0.13 (0.005) 1.1 (0.043) 98 Q 734312 7.3 0.3 (0.287 0.012) 4.3 0.3 1.1 0.1 (0.169 0.012) (0.043 0.004) 2.4 (0.094) 1.3 (0.051) N/A 0.05 (0.002) N/A N/A 0.13 (0.005) 3.8 (0.150) 170 T 3528-12 3.5 0.2 (0.138 0.008) 2.8 0.2 1.1 0.1 (0.110 0.008) (0.043 0.004) 2.2 (0.087) 0.8 (0.032) N/A 0.05 (0.002) N/A N/A 0.13 (0.005) 1.9 (0.075) 55 U 6.0 0.3 6032-15 (0.236 0.012) 3.2 0.3 1.4 0.1 (0.126 0.012) (0.055 0.004) 2.2 (0.087) 1.3 (0.051) N/A 0.05 (0.002) N/A N/A 0.13 (0.005) 2.9 (0.114) 117 7.3 0.3 (0.287 0.012) 4.3 0.3 (0.169 0.012) 2.4 (0.094) 1.3 (0.051) N/A 0.05 (0.002) N/A N/A 0.13 (0.005) 3.6 (0.142) 274 N/A 0.05 (0.002) N/A N/A 0.13 (0.005) 3.6 (0.142) 223 V 734319 1.5 (0.059) Maximum 1.8 0.1* (0.0710.004) W 734315 7.3 0.3 (0.287 0.012) 2.4(0.094) 1.30 (0.051) 4.3 0.3 1.4 0.1 2.8 0.2 S1 = 5.0 (0.197)** (0.169 0.012) (0.055 0.004) (0.110 0.0079)** S2 = 1.3 (0.051)** X 734343 7.3 0.3 (0.287 0.012) 4.3 0.3 (0.169 0.012) 4.0 0.3 (0.157 0.012) 2.4 (0.094) 1.3 (0.051) 0.5 (0.020) 0.10 0.10 (0.004 0.004) 1.7 (0.067) 1.0 (0.039) 0.13 (0.005) 3.6 (0.142) 554 Y 734340 7.3 0.3 (0.287 0.012) 4.3 0.3 (0.169 0.012) 3.8 0.2 (0.150 0.008) 2.4 (0.094) 1.3 (0.051) 0.5 (0.020) 0.10 0.10 (0.004 0.004) 1.7 (0.067) 1.0 (0.039) 0.13 (0.005) 3.8 (0.150) 494 * Height tolerance is 0.2 for V case T521 only ** S1 and S2 is for T528 series only (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 7 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Dimensions - Millimeters cont'd T523 END VIEW BOTTOM VIEW SIDE VIEW H F W L S S KEMET EIA W 7343-15 J 7360-15 V 7343-20 H 7360-20 L W H F 0.1 (0.004) S 0.3 (0.012) 7.30.3 (0.2870.012) 7.30.3 (0.2870.012) 7.30.3 (0.2870.012) 7.30.3 (0.2870.012) 4.30.3 (0.1690.012) 6.00.3 (0.2360.012) 4.30.3 (0.1690.012) 6.00.3 (0.2360.012) 1.40.1 (0.0550.004) 1.40.1 (0.0550.004) 1.90.1 (0.0750.004) 1.90.1 (0.0750.004) 2.4 (0.094) 4.45 (0.175) 2.4 (0.094) 4.45 (0.175) 1.3 (0.051) 1.6 (0.063) 1.3 (0.051) 1.6 (0.063) Typical Weight (mg) 223 263 274 385 T527 END VIEW BOTTOM VIEW SIDE VIEW H F L W S Case Size S Component Dimensions Typical Weight KEMET EIA L W H F S (mg) I 3216-10 3.20.2 1.60.2 0.90.1 1.20.1 0.80.2 70 T529 END VIEW BOTTOM VIEW SIDE VIEW H F L W S S Case Size Component Dimensions Typical Weight KEMET EIA L W H F S (mg) P 2012-10 2.00.1 1.250.1 1.0 maximum 0.90.1 0.550.1 11.4 I 3216-10 3.20.2 1.60.2 1.0 maximum 1.20.1 0.80.1 70 (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 8 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 94 11.75 17 17 25 25 25 25 25 25 25 37.5 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 82.5 83 82.5 82.5 82.5 82.5 82.5 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 10 8 8 8 8 8 10 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 8 8 8 10 10 10 10 10 10 10 10 10 10 8 8 8 8 8 8 8 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 40 90 70 80 40 70 80 25 35 40 70 55 25 35 15 18 21 25 30 35 55 70 70 55 25 45 25 6 7 9 12 15 25 45 7 40 9 12 15 18 35 45 70 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 2 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 F KEMET/EIA (See below for part options) 470 47 68 68 100 100 100 100 100 100 100 150 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 330 330 330 330 330 330 330 V/7343-19 A/3216-18 A/3216-18 A/3216-18 T/3528-12 T/3528-12 T/3528-12 B/3528-21 B/3528-21 B/3528-21 B/3528-21 U/6032-15 A/3216-18 A/3216-18 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 T/3528-12 U/6032-15 C/6032-28 C/6032-28 W/7343-15 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 T520V477M002A(1)E040 T520A476M2R5A(1)E090^ T520A686M2R5A(1)E070^ T520A686M2R5A(1)E080^ T520T107M2R5A(1)E040 T520T107M2R5A(1)E070 T525T107M2R5A(1)E080 T520B107M2R5A(1)E025 T520B107M2R5A(1)E035 T520B107M2R5A(1)E040 T520B107M2R5A(1)E070 T520U157M2R5A(1)E055 T520A227M2R5A(1)E025^ T520A227M2R5A(1)E035^ T520B227M2R5A(1)E015 T520B227M2R5A(1)E018 T520B227M2R5A(1)E021 T520B227M2R5A(1)E025 T520B227M2R5A(1)E030 T520B227M2R5A(1)E035 T520B227M2R5A(1)E055 T520B227M2R5A(1)E070 T520T227M2R5ATE070^ T520U227M2R5A(1)E055 T520C227M2R5A(1)E025 T520C227M2R5A(1)E045 T520W227M2R5A(1)E025 T520V227M2R5A(1)E006 T520V227M2R5A(1)E007 T520V227M2R5A(1)E009 T520V227M2R5A(1)E012 T520V227M2R5A(1)E015 T520V227M2R5A(1)E025 T520V227M2R5A(1)E045 T520D227M2R5A(1)E007 T520D227M2R5A(1)E040 T520B337M2R5ATE009^ T520B337M2R5ATE012^ T520B337M2R5A(1)E015 T520B337M2R5A(1)E018 T520B337M2R5A(1)E035 T520B337M2R5A(1)E045 T520B337M2R5A(1)E070 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature mA at +45C 100 kHz Reflow Temp 260C C 2200 1100 1300 1200 1600 1200 1100 2300 1900 1800 1300 1600 1732 1500 2900 2700 2500 2300 2100 1900 1500 1300 1200 1600 2600 1900 2700 5600 5200 4600 3900 3500 2700 2000 5700 2400 3073 2700 2900 2700 1900 1700 1300 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 105 125 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 9 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont'd Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 188 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 117.5 140 170 170 170 170 170 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8 10 10 10 10 10 10 8 8 8 10 8 10 10 8 10 8 8 8 10 8 10 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 15 18 25 45 9 12 25 15 25 40 6 7 9 12 15 18 25 40 6 7 25 14 6 7 9 12 15 18 25 45 5 6 6 7 9 10 25 5 6 7 10 10 15 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 F KEMET/EIA (See below for part options) 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 560 680 680 680 680 680 C/6032-28 C/6032-28 C/6032-28 C/6032-28 L/6032-19 L/6032-19 L/6032-19 W/7343-15 W/7343-15 W/7343-15 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 B/3528-21 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 T520C337M2R5A(1)E015 T520C337M2R5A(1)E018 T520C337M2R5A(1)E025 T520C337M2R5A(1)E045 T520L337M2R5A(1)E009 T520L337M2R5A(1)E012 T520L337M2R5A(1)E025 T520W337M2R5A(1)E015 T520W337M2R5A(1)E025 T520W337M2R5A(1)E040 T520V337M2R5A(1)E006 T520V337M2R5A(1)E007 T520V337M2R5A(1)E009 T520V337M2R5A(1)E012 T520V337M2R5A(1)E015 T520V337M2R5A(1)E018 T520V337M2R5A(1)E025 T520V337M2R5A(1)E040 T520D337M2R5A(1)E006 T520D337M2R5A(1)E007 T525D337M2R5A(1)E025 T520B477M2R5ATE014^ T520V477M2R5A(1)E006 T520V477M2R5A(1)E007 T520V477M2R5A(1)E009 T520V477M2R5A(1)E012 T520V477M2R5A(1)E015 T520V477M2R5A(1)E018 T520C477M2R5A(1)E025 T520C477M2R5A(1)E045 T530D477M2R5A(1)E005 T520D477M2R5A(1)E006 T530D477M2R5A(1)E006 T520D477M2R5A(1)E007 T520D477M2R5A(1)E009 T530D477M2R5A(1)E010 T525D477M2R5A(1)E025 T530D567M2R5A(1)E005 T530D687M2R5A(1)E006 T530D687M2R5A(1)E007 T520D687M2R5A(1)E010 T530D687M2R5A(1)E010 T520D687M2R5A(1)E015 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature mA at +45C 100 kHz Reflow Temp 260C C 3300 3000 2600 1900 4100 3500 2400 3500 2700 2100 5600 5200 4600 3900 3500 3200 2700 2200 6100 5700 3000 3000 5600 5200 4600 3900 3500 3200 2600 1900 7100 6100 6500 5700 5000 5000 3000 7100 6500 6000 4700 5000 3900 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 125 85 105 105 105 105 105 105 105 105 125 105 125 105 105 125 125 125 125 125 105 125 105 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 10 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont'd Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 170 170 170 170 170 170 170 170 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 375 375 30 30 30 30 30 45 45 45 45 45 99 99 99 99 99 141 141 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 10 10 8 8 8 10 10 8 10 10 10 10 10 10 10 8 8 10 10 10 8 8 8 10 8 10 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 8 10 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 25 40 5 6 7 15 25 6 4.5 6 7 9 10 15 30 5 6 10 15 25 4 5 6 10 5 15 80 25 35 40 70 25 35 40 70 80 9 12 15 25 25 10 25 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 F KEMET/EIA (See below for part options) 680 680 680 680 680 680 680 680 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1500 1500 100 100 100 100 100 150 150 150 150 150 330 330 330 330 330 470 470 D/7343-31 D/7343-31 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 X/7343-43 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 T525D687M2R5A(1)E025 T520D687M2R5A(1)E040 T530Y687M2R5A(1)E005 T530Y687M2R5A(1)E006 T530Y687M2R5A(1)E007 T520Y687M2R5A(1)E015 T520Y687M2R5A(1)E025 T530X687M2R5A(1)E006 T520D108M2R5A(1)E4R5 T520D108M2R5A(1)E006 T520D108M2R5A(1)E007 T520D108M2R5A(1)E009 T520D108M2R5A(1)E010 T520D108M2R5A(1)E015 T520D108M2R5A(1)E030 T530Y108M2R5A(1)E005 T530Y108M2R5A(1)E006 T520Y108M2R5A(1)E010 T520Y108M2R5A(1)E015 T520Y108M2R5A(1)E025 T530X108M2R5A(1)E004 T530X108M2R5A(1)E005 T530X108M2R5A(1)E006 T520X108M2R5A(1)E010 T530X158M2R5A(1)E005 T520X158M2R5A(1)E015 T525B107M003A(1)E080 T520B107M003A(1)E025 T520B107M003A(1)E035 T520B107M003A(1)E040 T520B107M003A(1)E070 T520B157M003A(1)E025 T520B157M003A(1)E035 T520B157M003A(1)E040 T520B157M003A(1)E070 T525B157M003A(1)E080 T520V337M003A(1)E009 T520V337M003A(1)E012 T520V337M003A(1)E015 T520V337M003A(1)E025 T525D337M003A(1)E025 T530D477M003A(1)E010 T525D477M003A(1)E025 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature mA at +45C 100 kHz Reflow Temp 260C C 3000 2400 7300 6600 6100 4000 3100 6700 7100 6100 5700 5000 4700 3900 2700 7300 6600 4900 4000 3100 8200 7300 6700 5000 7300 4100 1300 2300 1900 1800 1300 2300 1900 1800 1300 1300 4600 3900 3500 2700 3000 5000 3000 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 125 105 125 125 125 105 105 125 105 105 105 105 105 105 105 125 125 105 105 105 125 125 125 105 125 105 125 105 105 105 105 105 105 105 105 125 105 105 105 105 125 125 125 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 11 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont'd Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 204 204 204 204 300 300 300 450 6 13.2 13.2 18.8 18.8 18.8 27 27.2 27.2 27.2 27.2 27.2 27.2 27.2 40 40 40 40 40 40 40 40 40 40 40 60 60 60 60 60 60 60 60 60 60 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 8 10 10 10 8 10 10 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 10 15 25 40 10 15 30 8 100 70 80 70 80 70 180 70 25 35 40 70 80 55 200 150 200 70 150 25 35 40 70 80 55 15 18 25 30 35 40 70 55 15 25 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 F KEMET/EIA (See below for part options) 680 680 680 680 1000 1000 1000 1500 15 33 33 47 47 47 68 68 68 68 68 68 68 68 100 100 100 100 100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 150 150 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 T/3528-12 A/3216-18 A/3216-18 A/3216-18 A/3216-18 T/3528-12 A/3216-18 T/3528-12 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 U/6032-15 I/3216-10 A/3216-18 A/3216-18 T/3528-12 T/3528-12 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 U/6032-15 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 U/6032-15 C/6032-28 C/6032-28 T530D687M003A(1)E010 T520D687M003A(1)E015 T525D687M003A(1)E025 T520D687M003A(1)E040 T530X108M003A(1)E010 T520X108M003A(1)E015 T520X108M003A(1)E030 T530X158M003A(1)E008 T520T156M004A(1)E100 T520A336M004A(1)E070^ T520A336M004A(1)E080^ T520A476M004A(1)E070^ T520A476M004A(1)E080^ T520T476M004A(1)E070 T520A686M004A(1)E180^ T520T686M004A(1)E070 T520B686M004A(1)E025 T520B686M004A(1)E035 T520B686M004A(1)E040 T520B686M004A(1)E070 T525B686M004A(1)E080 T520U686M004A(1)E055 T527I107M004ATE200^ T520A107M004A(1)E150^ T520A107M004A(1)E200^ T520T107M004A(1)E070 T520T107M004A(1)E150 T520B107M004A(1)E025 T520B107M004A(1)E035 T520B107M004A(1)E040 T520B107M004A(1)E070 T525B107M004A(1)E080 T520U107M004A(1)E055 T520B157M004A(1)E015 T520B157M004A(1)E018 T520B157M004A(1)E025 T520B157M004A(1)E030 T520B157M004A(1)E035 T520B157M004A(1)E040 T520B157M004A(1)E070 T520U157M004A(1)E055 T520C157M004A(1)E015 T520C157M004A(1)E025 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature mA at +45C 100 kHz Reflow Temp 260C C 5000 3900 3000 2400 5200 4100 2900 5800 1000 1300 1200 1300 1200 1200 800 1200 2300 1900 1800 1300 1300 1600 775 900 700 1200 800 2300 1900 1800 1300 1300 1600 2900 2700 2300 2100 1900 1800 1300 1600 3300 2600 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 125 105 125 105 125 105 105 125 105 105 105 105 105 105 105 105 105 105 105 105 125 105 105 105 105 105 105 105 105 105 105 125 105 105 105 105 105 105 105 105 105 105 105 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 12 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont'd Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 60 60 60 60 60 60 60 60 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 132 132 132 132 132 132 132 132 132 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 8 8 10 10 10 10 10 10 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8 8 10 10 10 10 10 10 8 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 45 100 7 9 12 15 25 7 35 45 70 15 18 25 45 55 12 25 25 40 6 7 9 12 15 18 25 40 45 6 7 12 25 65 25 45 7 9 12 18 25 40 5 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 F KEMET/EIA (See below for part options) 150 150 150 150 150 150 150 150 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 330 330 330 330 330 330 330 330 330 C/6032-28 C/6032-28 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 L/6032-19 L/6032-19 W/7343-15 W/7343-15 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 C/6032-28 C/6032-28 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 T520C157M004A(1)E045 T520C157M004A(1)E100 T520V157M004A(1)E007 T520V157M004A(1)E009 T520V157M004A(1)E012 T520V157M004A(1)E015 T520V157M004A(1)E025 T520D157M004A(1)E007 T520B227M004A(1)E035 T520B227M004A(1)E045 T520B227M004A(1)E070 T520C227M004A(1)E015 T520C227M004A(1)E018 T520C227M004A(1)E025 T520C227M004A(1)E045 T520C227M004A(1)E055 T520L227M004A(1)E012 T520L227M004A(1)E025 T520W227M004A(1)E025 T520W227M004A(1)E040 T520V227M004A(1)E006 T520V227M004A(1)E007 T520V227M004A(1)E009 T520V227M004A(1)E012 T520V227M004A(1)E015 T520V227M004A(1)E018 T520V227M004A(1)E025 T520V227M004A(1)E040 T520V227M004A(1)E045 T520D227M004A(1)E006 T520D227M004A(1)E007 T520D227M004A(1)E012 T525D227M004A(1)E025 T520D227M004A(1)E065 T520C337M004A(1)E025 T520C337M004A(1)E045 T520V337M004A(1)E007 T520V337M004A(1)E009 T520V337M004A(1)E012 T520V337M004A(1)E018 T520V337M004A(1)E025 T520V337M004A(1)E040 T530D337M004A(1)E005 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature mA at +45C 100 kHz Reflow Temp 260C C 1900 1300 5200 4600 3900 3500 2700 5700 1900 1700 1300 3300 3000 2600 1900 1700 3500 2400 2700 2100 5600 5200 4600 3900 3500 3200 2700 2200 2000 6100 5700 4300 3000 1900 2600 1900 5200 4600 3900 3200 2700 2200 7100 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 125 105 105 105 105 105 105 105 105 105 125 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 13 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont'd Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 132 132 132 132 132 132 132 132 132 188 188 188 188 188 188 188 188 188 188 188 188 272 272 272 272 272 272 272 272 272 272 272 272 272 272 400 9.45 18.9 22 22 13.86 13.86 13.86 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 10 8 10 10 10 10 10 10 10 8 10 8 10 10 10 10 10 10 10 8 8 10 10 10 8 10 10 10 8 8 8 10 8 10 10 8 8 6 6 6 8 8 8 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 6 6 7 9 12 15 25 40 45 6 10 10 12 15 18 25 25 40 40 5 6 12 15 25 5 10 15 25 4 5 6 10 10 15 35 6 100 200 150 200 90 100 100 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6.3 6.3 6.3 6.3 6.3 6.3 6.3 F KEMET/EIA (See below for part options) 330 330 330 330 330 330 330 330 330 470 470 470 470 470 470 470 470 470 470 470 470 680 680 680 680 680 680 680 680 680 680 680 680 680 680 1000 15 10 22 22 22 22 22 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 Y/7343-40 Y/7343-40 D/7343-31 D/7343-31 D/7343-31 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 T/3528-12 P/2012-10 P/2012-10 P/2012-10 A/3216-18 A/3216-18 T/3528-12 T520D337M004A(1)E006 T530D337M004A(1)E006 T520D337M004A(1)E007 T520D337M004A(1)E009 T520D337M004A(1)E012 T520D337M004A(1)E015 T525D337M004A(1)E025 T520D337M004A(1)E040 T520D337M004A(1)E045 T530D477M004A(1)E006 T520D477M004A(1)E010 T530D477M004A(1)E010 T520D477M004A(1)E012 T520D477M004A(1)E015 T520D477M004A(1)E018 T520D477M004A(1)E025 T525D477M004A(1)E025 T520D477M004A(1)E040 T525D477M004A(1)E040 T530Y477M004A(1)E005 T530Y477M004A(1)E006 T520D687M004A(1)E012 T520D687M004A(1)E015 T520D687M004A(1)E025 T530Y687M004A(1)E005 T520Y687M004A(1)E010 T520Y687M004A(1)E015 T520Y687M004A(1)E025 T530X687M004A(1)E004 T530X687M004A(1)E005 T530X687M004A(1)E006 T520X687M004A(1)E010 T530X687M004A(1)E010 T520X687M004A(1)E015 T520X687M004A(1)E035 T530X108M004A(1)E006 T520T156M006A(1)E100 T529P106M006AAE200^ T529P226M006AAE150^ T529P226M006AAE200^ T520A226M006A(1)E090^ T520A226M006A(1)E100^ T520T226M006A(1)E100 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature mA at +45C 100 kHz Reflow Temp 260C C 6100 6500 5700 5000 4300 3900 3000 2400 2200 6500 4700 5000 4300 3900 3500 3000 3000 2400 2400 7300 6600 4300 3900 3000 7300 4900 4000 3100 8200 7300 6700 5000 5200 4100 2700 6700 1000 354 408 354 1100 1100 1000 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 125 105 105 105 105 125 105 105 125 105 125 105 105 105 105 125 105 125 125 125 105 105 105 125 105 105 105 125 125 125 105 125 105 105 125 105 105 105 105 105 105 105 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 14 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont'd Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 20.79 20.79 20.79 20.79 20.79 20.79 20.79 20.79 20.79 20.79 29.61 29.6 29.6 29.61 29.61 29.61 29.61 29.61 29.61 29.61 29.61 29.61 29.61 42.84 42.84 42.84 42.84 42.84 42.84 42.84 42.84 42.84 42.84 42.84 63.0 63.0 63.0 63 63 63 63 63 63 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 8 8 8 8 8 8 8 8 8 8 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 70 80 120 70 25 35 40 70 80 100 200 150 200 150 40 70 80 25 35 40 70 70 80 150 70 150 25 35 40 70 80 55 70 100 200 100 70 70 45 35 25 70 55 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 F KEMET/EIA (See below for part options) 33 33 33 33 33 33 33 33 33 33 47 47 47 47 47 47 47 47 47 47 47 47 47 68 68 68 68 68 68 68 68 68 68 68 100 100 100 100 100 100 100 100 100 A/3216-18 A/3216-18 A/3216-18 T/3528-12 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 P/2012-10 P/2012-10 I/3216-10 A/3216-18 T/3528-12 T/3528-12 T/3528-12 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 A/3216-18 T/3528-12 T/3528-12 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 U/6032-15 U/6032-15 C/6032-28 I/3216-10 I/3216-10 I/3216-10 A/3216-18 A/3216-18 A/3216-18 A/3216-18 T/3528-12 T/3528-12 T520A336M006A(1)E070^ T520A336M006A(1)E080^ T520A336M006A(1)E120^ T520T336M006A(1)E070 T520B336M006A(1)E025 T520B336M006A(1)E035 T520B336M006A(1)E040 T520B336M006A(1)E070 T525B336M006A(1)E080 T520C336M006A(1)E100 T529P476M006AAE200^ T529P476M006AAE150^ T527I476M006ATE200^ T520A476M006A(1)E150^ T520T476M006A(1)E040 T520T476M006A(1)E070 T525T476M006A(1)E080 T520B476M006A(1)E025 T520B476M006A(1)E035 T520B476M006A(1)E040 T520B476M006A(1)E070 T525B476M006A(1)E070 T525B476M006A(1)E080 T520A686M006A(1)E150^ T520T686M006A(1)E070 T520T686M006A(1)E150 T520B686M006A(1)E025 T520B686M006A(1)E035 T520B686M006A(1)E040 T520B686M006A(1)E070 T525B686M006A(1)E080 T520U686M006A(1)E055 T520U686M006A(1)E070 T520C686M006A(1)E100 T527I107M006ATE200^ T527I107M006ATE100^ T527I107M006ATE070^ T520A107M006ATE070^ T520A107M006ATE045^ T520A107M006ATE035^ T520A107M006ATE025^ T520T107M006APE070 T520T107M006APE055 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature mA at +45C 100 kHz Reflow Temp 260C C 1300 1200 1000 1200 2300 1900 1800 1300 1300 1300 354 408 548 900 1600 1200 1100 2300 1900 1800 1300 1300 1300 900 1200 800 2300 1900 1800 1300 1300 1600 1400 1300 775 775 1134 1035 1600 1500 1732 1200 1200 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 105 105 105 125 105 105 105 105 105 105 105 125 105 105 105 105 125 125 105 105 105 105 105 105 105 125 105 105 105 105 105 105 105 105 105 105 105 105 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 15 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont'd Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 75.6 283.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 8 8 8 8 8 8 8 8 10 10 10 10 10 8 8 8 10 8 8 8 8 9 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 15 18 25 35 40 45 70 55 40 9 12 15 45 25 45 35 200 35 70 150 200 18 25 35 45 70 30 35 15 25 45 55 45 55 12 25 25 40 6 7 9 12 15 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 F KEMET/EIA (See below for part options) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 120 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 U/6032-15 W/7343-15 V/7343-19 V/7343-19 V/7343-19 V/7343-19 C/6032-28 C/6032-28 B/3528-21 I/3216-10 M/3528-15 M/3528-15 M/3528-15 M/3528-15 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 T/3528-12 T/3528-12 C/6032-28 C/6032-28 C/6032-28 C/6032-28 U/6032-15 U/6032-15 L/6032-19 L/6032-19 W/7343-15 W/7343-15 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 T520B107M006A(1)E015 T520B107M006A(1)E018 T520B107M006A(1)E025 T520B107M006A(1)E035 T520B107M006A(1)E040 T520B107M006A(1)E045 T520B107M006A(1)E070 T520U107M006A(1)E055 T520W107M006A(1)E040 T520V107M006A(1)E009 T520V107M006A(1)E012 T520V107M006A(1)E015 T520V107M006A(1)E045 T520C107M006A(1)E025 T520C107M006A(1)E045 T520B127M006A(1)E035 T529I157M006AAE200 T520M157M006A(1)E035 T520M157M006A(1)E070 T520M157M006A(1)E150 T520M157M006A(1)E200 T520B157M006A(1)E018 T520B157M006A(1)E025 T520B157M006A(1)E035 T520B157M006A(1)E045 T520B157M006A(1)E070 T523T157M006APE030 T520T157M006ATE035^ T520C157M006A(1)E015 T520C157M006A(1)E025 T520C157M006A(1)E045 T520C157M006A(1)E055 T520U157M006A(1)E045 T520U157M006A(1)E055 T520L157M006A(1)E012 T520L157M006A(1)E025 T520W157M006A(1)E025 T520W157M006A(1)E040 T520V157M006A(1)E006 T520V157M006A(1)E007 T520V157M006A(1)E009 T520V157M006A(1)E012 T520V157M006A(1)E015 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature mA at +45C 100 kHz Reflow Temp 260C C 2900 2700 2300 1900 1800 1700 1300 1600 2100 4600 3900 3500 2000 2600 1900 1900 548 1900 1300 900 800 2700 2300 1900 1700 1300 1870 1700 3300 2600 1900 1700 1700 1600 3500 2400 2700 2100 5600 5200 4600 3900 3500 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 16 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont'd Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 138.6 207.9 208 207.9 207.9 207.9 207.9 207.9 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 10 10 10 10 10 10 10 10 10 10 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 8 10 8 10 10 10 10 10 10 10 10 8 8 10 10 10 10 10 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 18 25 40 45 6 7 15 25 25 55 25 35 45 70 15 18 25 45 7 9 12 15 18 25 40 5 6 6 7 9 15 18 25 25 40 50 40 70 15 18 25 40 45 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 F KEMET/EIA (See below for part options) 150 150 150 150 150 150 150 150 150 150 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 330 330 330 330 330 330 330 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 B/3528-21 B/3528-21 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 T520V157M006A(1)E018 T520V157M006A(1)E025 T520V157M006A(1)E040 T520V157M006A(1)E045 T520D157M006A(1)E006 T520D157M006A(1)E007 T520D157M006A(1)E015 T520D157M006A(1)E025 T525D157M006A(1)E025 T520D157M006A(1)E055 T520B227M006A(1)E025 T520B227M006A(1)E035 T520B227M006A(1)E045 T520B227M006A(1)E070 T520C227M006A(1)E015 T520C227M006A(1)E018 T520C227M006A(1)E025 T520C227M006A(1)E045 T520V227M006A(1)E007 T520V227M006A(1)E009 T520V227M006A(1)E012 T520V227M006A(1)E015 T520V227M006A(1)E018 T520V227M006A(1)E025 T520V227M006A(1)E040 T530D227M006A(1)E005 T520D227M006A(1)E006 T530D227M006A(1)E006 T520D227M006A(1)E007 T520D227M006A(1)E009 T520D227M006A(1)E015 T520D227M006A(1)E018 T520D227M006A(1)E025 T525D227M006A(1)E025 T520D227M006A(1)E040 T520D227M006A(1)E050 T520B337M006A(1)E040 T520B337M006A(1)E070 T520V337M006A(1)E015 T520V337M006A(1)E018 T520V337M006A(1)E025 T520V337M006A(1)E040 T520V337M006A(1)E045 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature mA at +45C 100 kHz Reflow Temp 260C C 3200 2700 2200 2000 6100 5700 3900 3000 3000 2000 2300 1900 1700 1300 3300 3000 2600 1900 5200 4600 3900 3500 3200 2700 2200 7100 6100 6500 5700 5000 3900 3500 3000 3000 2400 2100 1800 1300 3500 3200 2700 2200 2000 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 105 105 105 125 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 125 105 125 105 105 105 105 105 125 105 105 85 85 105 105 105 105 105 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 17 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont'd Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 207.9 207.9 207.9 207.9 207.9 207.9 207.9 207.9 207.9 207.9 207.9 207.9 207.9 207.9 207.9 207.9 207.9 207.9 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 296.1 428.4 428.4 428.4 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 8 10 10 8 10 10 10 10 10 10 10 8 8 10 8 10 10 10 10 9 10 10 8 10 10 10 10 10 10 10 10 10 8 8 8 10 8 10 10 10 10 10 8 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 6 9 10 10 15 18 25 25 40 40 45 5 6 10 10 15 25 40 55 35 55 35 5 10 15 18 25 35 35 15 25 30 4 5 6 10 10 18 35 40 18 25 10 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 F KEMET/EIA (See below for part options) 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 680 680 680 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 W/7343-15 W/7343-15 V/7343-19 V/7343-19 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 Y/7343-40 Y/7343-40 X/7343-43 T530D337M006A(1)E006 T520D337M006A(1)E009 T520D337M006A(1)E010 T530D337M006A(1)E010 T520D337M006A(1)E015 T520D337M006A(1)E018 T520D337M006A(1)E025 T525D337M006A(1)E025 T520D337M006A(1)E040 T525D337M006A(1)E040 T520D337M006A(1)E045 T530Y337M006A(1)E005 T530Y337M006A(1)E006 T520Y337M006A(1)E010 T530Y337M006A(1)E010 T520Y337M006A(1)E015 T520Y337M006A(1)E025 T520Y337M006A(1)E040 T520W477M006A(1)E055 T520W477M006A(1)E035 T520V477M006A(1)E055 T520V477M006A(1)E035 T530Y477M006A(1)E005 T520Y477M006A(1)E010 T520Y477M006A(1)E015 T520Y477M006A(1)E018 T520Y477M006A(1)E025 T520Y477M006A(1)E035 T525Y477M006A(1)E035 T520D477M006A(1)E015 T520D477M006A(1)E025 T520D477M006A(1)E030 T530X477M006A(1)E004 T530X477M006A(1)E005 T530X477M006A(1)E006 T520X477M006A(1)E010 T530X477M006A(1)E010 T520X477M006A(1)E018 T520X477M006A(1)E035 T520X477M006A(1)E040 T520Y687M006A(1)E018 T520Y687M006A(1)E025 T530X687M006A(1)E010 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature mA at +45C 100 kHz Reflow Temp 260C C 6500 5000 4700 5000 3900 3500 3000 3000 2400 2400 2200 7300 6600 4900 5100 4000 3100 2500 1800 2300 1800 2300 7300 4900 4000 3700 3100 2600 2600 3900 3000 2700 8200 7300 6700 5000 5200 3700 2700 2500 3700 3100 5200 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 125 105 105 125 105 105 105 125 105 125 105 125 125 105 125 105 105 105 85 85 105 105 125 105 105 105 105 105 125 105 105 105 125 125 125 105 125 105 105 105 105 105 125 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 18 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont'd Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 428.4 428.4 428 428 630 756 945 17.6 26.4 26.4 26.4 26.4 26.4 26.4 26.4 26.4 37.6 37.6 65.6 65.6 120 120 120 120 30 10 10 15 66 66 22 22 22 33 33 33 33 33 33 33 33 33 33 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 8 10 10 10 20 20 20 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 6 8 8 8 6 6 8 8 8 6 8 8 8 8 8 8 8 8 8 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 18 25 18 70 55 70 55 70 70 80 80 25 35 40 70 70 35 70 25 45 25 40 55 40 200 80 80 80 150 200 200 80 80 200 40 70 80 80 25 35 40 70 80 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 6.3 6.3 6.3 6.3 6.3 6.3 6.3 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 F KEMET/EIA (See below for part options) 680 680 680 680 1000 1200 1500 22 33 33 33 33 33 33 33 33 47 47 82 82 150 150 150 150 10 10 10 15 22 22 22 22 22 33 33 33 33 33 33 33 33 33 33 X/7343-43 X/7343-43 X/7343-43 J/7360-15 H/7360-20 H/7360-20 H/7360-20 T/3528-12 T/3528-12 T/3528-12 T/3528-12 B/3528-21 B/3528-21 B/3528-21 B/3528-21 U/6032-15 B/3528-21 B/3528-21 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 V/7343-19 P/2012-10 A/3216-18 A/3216-18 A/3216-18 P/2012-10 P/2012-10 I/3216-10 A/3216-18 B/3528-21 I/3216-10 T/3528-12 T/3528-12 T/3528-12 T/3528-12 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 T530X687M006A(1)E018 T520X687M006A(1)E025 T520X687M006A(1)E018 T523J687M006APE070 T520H108M006A(1)E055 T520H128M006A(1)E070 T520H158M006A(1)E055 T520T226M008A(1)E070 T520T336M008A(1)E070 T520T336M008A(1)E080 T525T336M008A(1)E080 T520B336M008A(1)E025 T520B336M008A(1)E035 T520B336M008A(1)E040 T520B336M008A(1)E070 T520U336M008A(1)E070 T520B476M008A(1)E035 T520B476M008A(1)E070 T520C826M008A(1)E025 T520C826M008A(1)E045 T520D157M008A(1)E025 T520D157M008A(1)E040 T520D157M008A(1)E055 T520V157M008A(1)E040 T529P106M010AAE200^ T520A106M010A(1)E080^ T525A106M010A(1)E080^ T520A156M010A(1)E080^ T529P226M010AAE150^ T529P226M010AAE200^ T527I226M010ATE200^ T520A226M010A(1)E080^ T525B226M010A(1)E080 T527I336M010ATE200^ T520T336M010A(1)E040 T520T336M010A(1)E070 T520T336M010A(1)E080 T525T336M010A(1)E080 T520B336M010A(1)E025 T520B336M010A(1)E035 T520B336M010A(1)E040 T520B336M010A(1)E070 T525B336M010A(1)E080 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature mA at +45C 100 kHz Reflow Temp 260C C 3900 3100 3700 2510 1800 1200 1800 1200 1200 1100 1100 2300 1900 1800 1300 1400 1900 1300 2600 1900 3000 2400 2000 2200 354 1200 1200 1200 408 354 548 1200 1300 548 1600 1200 1100 1100 2300 1900 1800 1300 1300 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 125 105 105 85 85 85 85 105 105 105 125 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 125 105 105 105 105 105 125 105 105 105 105 125 105 105 105 105 125 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 19 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont'd Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 33 47 47 47 47 47 47 68 68 68 68 68 68 68 68 68 68 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 150 150 150 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 8 6 8 8 8 8 8 8 10 10 8 10 10 10 10 10 10 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 8 10 10 10 8 8 8 10 10 10 10 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 70 200 45 35 70 55 100 55 25 40 45 25 40 45 60 100 100 70 25 45 25 40 18 25 45 50 55 18 25 55 55 80 55 18 25 40 5 6 10 15 18 25 25 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 F KEMET/EIA (See below for part options) 33 47 47 47 47 47 47 68 68 68 68 68 68 68 68 68 68 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 150 150 150 U/6032-15 I/3216-10 A/3216-18 B/3528-21 B/3528-21 U/6032-15 C/6032-28 U/6032-15 W/7343-15 W/7343-15 C/6032-28 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 B/3528-21 C/6032-28 C/6032-28 L/6032-19 W/7343-15 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 C/6032-28 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 T520U336M010A(1)E070 T527I476M010ATE200^ T520A476M010ATE045^ T520B476M010A(1)E035 T520B476M010A(1)E070 T520U476M010A(1)E055 T520C476M010A(1)E100 T520U686M010A(1)E055 T520W686M010A(1)E025 T520W686M010A(1)E040 T520C686M010A(1)E045 T520V686M010A(1)E025 T520V686M010A(1)E040 T520V686M010A(1)E045 T520V686M010A(1)E060 T520V686M010A(1)E100 T520D686M010A(1)E100 T520B107M010ATE070^ T520C107M010A(1)E025 T520C107M010A(1)E045 T520L107M010A(1)E025 T520W107M010A(1)E040 T520V107M010A(1)E018 T520V107M010A(1)E025 T520V107M010A(1)E045 T520V107M010A(1)E050 T520V107M010A(1)E055 T520D107M010A(1)E018 T525D107M010A(1)E025 T520D107M010A(1)E055 T525D107M010A(1)E055 T520D107M010A(1)E080 T520C157M010A(1)E055 T520V157M010A(1)E018 T520V157M010A(1)E025 T520V157M010A(1)E040 T530D157M010A(1)E005 T530D157M010A(1)E006 T530D157M010A(1)E010 T520D157M010A(1)E015 T520D157M010A(1)E018 T520D157M010A(1)E025 T525D157M010A(1)E025 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature mA at +45C 100 kHz Reflow Temp 260C C 1400 548 1291 1900 1300 1600 1300 1600 2700 2100 1900 2700 2200 2000 1800 1400 1500 1300 2600 1900 2400 2100 3200 2700 2000 1900 1800 3500 3000 2000 2000 1700 1700 3200 2700 2200 7100 6500 5000 3900 3500 3000 3000 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 125 105 125 105 105 105 105 105 125 125 125 105 105 105 125 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 20 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont'd Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 150 150 150 150 150 150 220 220 220 220 220 220 220 220 220 220 220 330 330 330 330 330 330 330 330 330 330 330 330 470 820 330 52 12.5 18.75 58.8 16 16 24 35.2 35.2 52.8 52.8 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 10 10 10 10 10 10 10 10 10 8 8 10 10 10 10 8 10 10 10 10 10 8 8 8 10 8 10 10 10 10 20 10 10 8 8 8 8 8 8 8 8 8 10 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 40 55 55 15 18 25 40 45 25 6 10 18 25 25 40 6 40 15 25 35 35 4 5 6 10 10 25 35 70 70 70 40 40 150 80 90 100 100 90 90 80 45 50 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 11 12.5 12.5 12.5 16 16 16 16 16 16 16 F KEMET/EIA (See below for part options) 150 150 150 150 150 150 220 220 220 220 220 220 220 220 220 220 220 330 330 330 330 330 330 330 330 330 330 330 330 470 820 330 47 10 15 47 10 10 15 22 22 33 33 D/7343-31 D/7343-31 D/7343-31 Y/7343-40 Y/7343-40 Y/7343-40 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 J/7360-15 J/7360-15 H/7360-20 X/7343-43 Q/7343-12 T/3528-12 T/3528-12 T/3528-12 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 T/3528-12 T/3528-12 T520D157M010A(1)E040 T520D157M010A(1)E055 T525D157M010A(1)E055 T520Y157M010A(1)E015 T520Y157M010A(1)E018 T520Y157M010A(1)E025 T520V227M010A(1)E040 T520V227M010A(1)E045 T520V227M010A(1)E025 T530D227M010A(1)E006 T530D227M010A(1)E010 T520D227M010A(1)E018 T520D227M010A(1)E025 T525D227M010A(1)E025 T520D227M010A(1)E040 T530Y227M010A(1)E006 T520Y227M010A(1)E040 T520Y337M010A(1)E015 T520Y337M010A(1)E025 T520Y337M010A(1)E035 T525Y337M010A(1)E035 T530X337M010A(1)E004 T530X337M010A(1)E005 T530X337M010A(1)E006 T520X337M010A(1)E010 T530X337M010A(1)E010 T520X337M010A(1)E025 T520X337M010A(1)E035 T523J337M010APE070 T523J477M010APE070 T520H827M010A(1)E070 T520X337M010A(1)E040 T520Q476M011A(1)E040 T520T106M12RA(1)E150 T520T156M12RA(1)E080 T521T476M12RA(1)E090 T520B106M016A(1)E100 T521B106M016A(1)E100 T521B156M016A(1)E090 T521B226M016A(1)E090 T520C226M016A(1)E080 T521T336M016A(1)E045 T521T336M016A(1)E050 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature mA at +45C 100 kHz Reflow Temp 260C C 2400 2000 2000 4000 3700 3100 2200 2000 2700 6500 5000 3500 3000 3000 2400 6600 2500 4000 3100 2600 2600 8200 7300 6700 5000 5200 3100 2700 2510 2510 1200 2500 4500 800 1100 1100 1100 1100 1200 1200 1400 1500 1400 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 125 105 105 105 105 105 105 125 125 105 105 125 105 125 105 105 105 105 125 125 125 125 105 125 105 105 85 85 85 105 105 105 105 105 105 125 105 105 105 105 105 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 21 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont'd Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 52.8 52.8 52.8 52.8 52.8 52.8 52.8 52.8 52.8 75.2 75.2 75.2 75.2 75.2 75.2 75.2 75.2 75.2 75.2 75.2 75.2 75.2 75.2 75.2 75.2 75.2 75.2 108.8 108.8 108.8 108.8 108.8 108.8 108.8 160 160 160 160 160 160 240 240 240 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 70 90 70 90 40 45 45 60 70 40 45 45 40 45 55 70 70 80 35 35 40 45 55 65 70 70 90 50 70 100 40 50 90 50 50 70 100 40 50 50 50 70 100 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 F KEMET/EIA (See below for part options) 33 33 33 33 33 33 33 33 33 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 68 68 68 68 68 68 68 100 100 100 100 100 100 150 150 150 B/3528-21 B/3528-21 B/3528-21 B/3528-21 Q/7343-12 W/7343-15 V/7343-19 V/7343-19 V/7343-19 W/7343-15 W/7343-15 W/7343-15 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 W/7343-15 W/7343-15 W/7343-15 V/7343-19 V/7343-19 V/7343-19 D/7343-31 W/7343-15 W/7343-15 W/7343-15 V/7343-19 V/7343-19 D/7343-31 W/7343-15 W/7343-15 W/7343-15 T521B336M016A(1)E070 T521B336M016A(1)E090 T525B336M016A(1)E070 T525B336M016A(1)E090 T521Q336M016A(1)E040 T520W336M016A(1)E045 T520V336M016A(1)E045 T520V336M016A(1)E060 T520V336M016A(1)E070 T521W476M016A(1)E040 T520W476M016A(1)E045 T521W476M016A(1)E045 T521V476M016A(1)E040 T520V476M016A(1)E045 T521V476M016A(1)E055 T520V476M016A(1)E070 T521V476M016A(1)E070 T521V476M016A(1)E080 T520D476M016A(1)E035 T525D476M016A(1)E035 T521D476M016A(1)E040 T521D476M016A(1)E045 T521D476M016A(1)E055 T525D476M016A(1)E065 T520D476M016A(1)E070 T521D476M016A(1)E070 T521D476M016A(1)E090 T523W686(2)016APE050 T523W686(2)016APE070 T523W686(2)016APE100 T521V686M016A(1)E040 T521V686M016A(1)E050 T521V686M016A(1)E090 T520D686M016A(1)E050 T523W107(2)016APE050 T523W107(2)016APE070 T523W107(2)016APE100 T521V107M016A(1)E040 T521V107M016A(1)E050 T521D107M016A(1)E050 T523W157(2)016APE050 T523W157(2)016APE070 T523W157(2)016APE100 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature mA at +45C 100 kHz Reflow Temp 260C C 1300 1200 1300 1200 2500 2000 2000 1800 1600 2100 2000 2000 2200 2000 1800 1600 1600 1500 2500 2500 2400 2200 2000 1900 1800 1800 1600 2820 2376 1988 2200 1900 1400 2100 2820 2376 1988 2200 1900 2100 2820 2376 1988 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 125 125 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 125 105 105 105 125 105 105 105 105 105 105 105 105 105 105 105 105 105 125 125 105 105 105 105 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 22 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont'd Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 240 240 240 240 240 240 240 352 352 352 352 528 528 528 752 20 30 44 44 44 44 44 132 94 94 94 94 94 94 94 136 200 200 300 300 35.3 50 25 25 25 37.5 37.5 37.5 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 10 10 8 8 10 8 10 10 10 10 10 10 10 10 10 8 10 8 10 10 10 10 10 9 9 10 10 10 10 10 10 10 10 10 10 10 10 8 8 8 8 10 10 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 50 40 15 25 40 40 80 35 50 70 70 25 50 70 20 100 90 90 40 45 90 90 90 40 45 90 80 55 55 40 50 55 55 65 50 300 100 100 100 60 100 90 90 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 25 25 25 25 25 25 25 25 F KEMET/EIA (See below for part options) 150 150 150 150 150 150 150 220 220 220 220 330 330 330 470 10 15 22 22 22 22 22 33 47 47 47 47 47 47 47 68 100 100 150 150 4.7 10 10 10 10 15 15 15 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 H/7360-20 J/7360-15 X/7343-43 X/7343-43 H/7360-20 O/7360-43 B/3528-21 B/3528-21 B/3528-21 V/7343-19 V/7343-19 V/7343-19 V/7343-19 B/3528-21 W/7343-15 W/7343-15 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 P/2012-10 M/3528-15 B/3528-21 T/3528-12 T/3528-12 B/3528-21 V/7343-19 V/7343-19 T521D157M016A(1)E050 T521D157M016A(1)E040 T530X157M016A(1)E015 T530X157M016A(1)E025 T520X157M016A(1)E040 T530X157M016A(1)E040 T521X157M016A(1)E080 T521X227M016A(1)E035 T521X227M016A(1)E050 T523H227M016APE070 T523J227M016APE070 T521X337M016A(1)E025 T521X337M016A(1)E050 T523H337M016APE070 T521O477M016ATE020 T521B106M020A(1)E100 T521B156M020A(1)E090 T521B226M020A(1)E090 T520V226M020A(1)E040 T520V226M020A(1)E045 T520V226M020A(1)E090 T521V226M020A(1)E090 T521B336M020ATE090^ T521W476M020A(1)E040 T521W476M020A(1)E045 T521V476M020A(1)E090 T521V476M020A(1)E080 T521V476M020A(1)E055 T521D476M020A(1)E055 T521D476M020A(1)E040 T521V686M020A(1)E050 T521V107M020A(1)E055 T521D107M020A(1)E055 T521D157M020A(1)E065 T521D157M020A(1)E050 T529P475M025AAE300^ T521M106M025ATE100^ T521B106M025A(1)E100 T521T106M025A(1)E100 T521T106M025A(1)E060 T521B156M025A(1)E100 T520V156M025A(1)E090 T521V156M025A(1)E090 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature mA at +45C 100 kHz Reflow Temp 260C C 2100 2400 4200 3300 2500 2600 1800 2700 2200 2510 2510 3100 2200 2510 3870 1100 1200 1200 2200 2000 1400 1400 972 2100 2000 1400 1500 1800 2000 2400 1900 1800 2000 1900 2100 289 922 1100 1000 1300 1100 1400 1400 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 125 125 105 125 105 125 125 85 85 125 125 85 105 125 105 105 105 105 105 125 105 105 105 125 125 125 125 125 105 125 105 105 105 105 105 125 125 125 105 105 105 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 23 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont'd Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 37.5 37.5 37.5 55 55 55 55 55 55 55 82.5 82.5 82.5 82.5 82.5 117.5 170 250 250 250 250 11.6 11.6 16.5 16.5 23.8 23.8 23.8 35 35 35 52.5 52.5 77 77 115.5 164.5 164.5 164.5 164.5 3.4 5 7.5 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 10 10 10 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8 8 8 8 10 8 8 8 8 10 10 10 10 10 10 10 10 10 10 8 8 8 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 40 60 80 100 40 70 40 45 60 90 25 60 40 40 60 65 70 40 60 30 60 150 200 150 200 90 150 200 150 200 120 100 125 40 60 65 30 70 90 100 200 200 200 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 50 50 50 F KEMET/EIA (See below for part options) 15 15 15 22 22 22 22 22 22 22 33 33 33 33 33 47 68 100 100 100 100 3.3 3.3 4.7 4.7 6.8 6.8 6.8 10 10 10 15 15 22 22 33 47 47 47 47 0.68 1 1.5 V/7343-19 D/7343-31 D/7343-31 B/3528-21 W/7343-15 W/7343-15 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 B/3528-21 B/3528-21 B/3528-21 B/3528-21 T/3528-12 B/3528-21 B/3528-21 B/3528-21 B/3528-21 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 W/7343-15 W/7343-15 B/3528-21 B/3528-21 B/3528-21 T521V156M025A(1)E040 T520D156M025A(1)E060 T520D156M025A(1)E080 T521B226M025A(1)E100 T521W226M025A(1)E040 T521W226M025A(1)E070 T521V226M025A(1)E040 T521V226M025A(1)E045 T521V226M025A(1)E060 T521V226M025A(1)E090 T521V336M025A(1)E025 T521V336M025A(1)E060 T521V336M025A(1)E040 T521D336M025A(1)E040 T521D336M025A(1)E060 T521D476M025A(1)E065 T521D686M025A(1)E070 T521D107M025A(1)E040 T521D107M025A(1)E060 T521X107M025A(1)E030 T521X107M025A(1)E060 T521B335M035A(1)E150 T521B335M035A(1)E200 T521B475M035A(1)E150 T521B475M035A(1)E200 T521T685M035APE090 T521B685M035A(1)E150 T521B685M035A(1)E200 T521B106M035A(1)E150 T521B106M035A(1)E200 T521V106M035A(1)E120 T521V156M035A(1)E100 T521V156M035A(1)E125 T521D226M035A(1)E040 T521D226M035A(1)E060 T521D336M035A(1)E065 T521X476M035A(1)E030 T521X476M035A(1)E070 T523W476(2)035APE090 T523W476(2)035APE100 T521B684M050A(1)E200 T521B105M050A(1)E200 T521B155M050A(1)E200 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature mA at +45C 100 kHz Reflow Temp 260C C 2200 1900 1700 1100 2100 1400 2200 2000 1800 1400 2700 1800 2200 2400 1900 1900 1800 2400 1900 2900 2000 900 800 900 800 1100 900 800 900 800 1200 1400 1200 2400 1900 1900 2900 1900 2100 1988 800 800 800 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 125 105 105 105 105 125 125 125 125 125 125 125 125 85 85 105 105 105 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 24 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 1 - Ratings & Part Number Reference cont'd Rated Voltage VDC at 105C Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at 25C Maximum/ 5 Minutes 11 16.5 28 28 28 28 34 34 34 34 50 50 50 90 90 90 90 110 110 110 165 165 4.3 6.3 9.5 29.6 29.61 29.6 42.8 63 94.5 94.5 138.6 35.3 75 112.5 A at 25C Maximum/ 5 Minutes % at 25C 120 Hz Maximum 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8 8 8 6 10 10 10 10 10 10 10 10 10 10 % at 25C 120 Hz Maximum m at 25C 100 kHz Maximum 200 200 70 90 70 90 70 90 70 90 90 120 90 90 70 50 35 90 75 50 75 50 200 200 200 200 300 75 75 50 35 150 75 75 50 35 m at 25C 100 kHz Maximum DC Leakage DF ESR Not all parts are 105C rated 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 63 63 63 63 63 63 63 63 63 63 63 75 75 75 F KEMET/EIA (See below for part options) 2.2 3.3 5.6 5.6 5.6 5.6 6.8 6.8 6.8 6.8 10 10 10 18 18 18 18 22 22 22 33 33 0.68 1 1.5 4.7 4.7 4.7 6.8 10 15 15 22 4.7 10 15 B/3528-21 B/3528-21 D/7343-31 D/7343-31 V/7343-19 V/7343-19 D/7343-31 D/7343-31 V/7343-19 V/7343-19 D/7343-31 D/7343-31 V/7343-19 D/7343-31 X/7343-43 X/7343-43 X/7343-43 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 B/3528-21 B/3528-21 B/3528-21 C/6032-28 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 D/7343-31 X/7343-43 X/7343-43 T521B225M050A(1)E200 T521B335M050A(1)E200 T521D565M050A(1)E070 T521D565M050A(1)E090 T521V565M050A(1)E070 T521V565M050A(1)E090 T521D685M050A(1)E070 T521D685M050A(1)E090 T521V685M050A(1)E070 T521V685M050A(1)E090 T521D106M050A(1)E090 T521D106M050A(1)E120 T521V106M050A(1)E090 T521D186M050A(1)E090 T521X186M050A(1)E070 T521X186M050A(1)E050 T521X186M050A(1)E035 T521D226M050A(1)E090 T521X226M050A(1)E075 T521X226M050A(1)E050 T521X336M050A(1)E075 T521X336M050A(1)E050 T521B684M063A(1)E200 T521B105M063A(1)E200 T521B155M063A(1)E200 T521C475M063A(1)E200 T521D475M063A(1)E300 T521D475M063A(1)E075 T521D685M063A(1)E075 T521X106M063A(1)E050 T521X156M063A(1)E035 T521X156M063A(1)E150 T521X226M063A(1)E075 T521D475M075A(1)E075 T521X106M075A(1)E050 T521X156M075A(1)E035 VDC at 105C F KEMET/EIA (See below for part options) Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number Maximum Allowable Ripple Current MSL Maximum Operating Temperature mA at +45C 100 kHz Reflow Temp 260C C 800 800 1800 1600 1800 1600 1800 1600 1800 1600 1600 1369 1600 1600 1900 2200 2700 1600 1815 2200 1815 2200 800 800 800 900 900 1700 1700 2200 2600 1300 1815 1700 2200 2600 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 105 105 105 105 125 125 125 125 125 125 125 125 125 125 mA at +45C 100 kHz Reflow Temp 260C C Maximum Allowable Ripple Current MSL Maximum Operating Temp (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 25 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Derating Guidelines 95% % Rated Voltage 90% 85% 80% 75% Recommended Application Voltage 70% 65% 60% 60% 55% 50% -55 25 85 Temperature C 105 125 Recommended Application Voltage KO-CAPs are solid state capacitors that demonstrate no wearout mechanism when operated within their recommended guidelines. While the KO-CAP can be operated at full rated voltage, most circuit designers seek a minimum level of assurance in long term reliability, which should be demonstrated with data. A voltage derating can provide the desired level of demonstrated reliability based on industry accepted acceleration models. Since most applications do require long term reliability, KEMET recommends that designers consider a voltage derating, according to the graphic above, for the maximum steady state voltage. Voltage Rating Maximum Recommended Steady State Voltage -55C to 105C 105C to 125C 90% of VR 60% of VR 75 V VR VR = Rated Voltage Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the device. Permissible AC ripple voltage, which may be applied is limited by two criteria: a. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor. b. The negative peak AC voltage, in combination with bias voltage, if any, must not exceed the allowable limits specified for reverse voltage. The maximum power dissipation must be reduced with increasing environmental operating temperatures. Refer to the table below for temperature compensation requirements. Temperature Compensation Multipliers for Maximum Ripple Current T 45C 1.00 45 C < T 85C 0.70 85C < T 125C 0.25 T= Environmental Temperature (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 26 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Surge Voltage Surge voltage is the maximum voltage (peak value) which may be applied to the capacitor. The surge voltage must not be applied for periodic charging and discharging in course of normal operation and cannot be part of the application voltage. Surge voltage capability is demonstrated by application of 1,000 cycles at operating temperature. The parts are charged through a 33 Ohm resistor for 30 seconds and then discharged though a 33 Ohm resistor for each cycle. Rated Voltage (V) Surge Voltage (V) Derated Voltage (V) -55C to 105C Derated Surge Voltage (V) up to 125C 2.5 6.3 10 16 20 3.3 8.2 13.0 20.8 26.0 1.7 4.2 6.7 10.7 13.4 2.2 5.5 8.7 13.9 17.4 25 35 50 32.5 45.5 65.0 16.8 23.5 33.5 21.8 30.5 43.6 Reverse Voltage Polymer electrolytic capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity. These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table. Temperature Permissible Transient Reverse Voltage 25C 55C 85C 105C 125C* 15% of Rated Voltage 10% of Rated Voltage 5% of Rated Voltage 3% of Rated Voltage 1% of Rated Voltage *For series rated to 125C (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 27 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 2 - Land Dimensions/Courtyard T520/T521/T523/T525/T530 KEMET Metric Size Code Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) Case EIA W L S V1 V2 W L S V1 V2 W L S V1 V2 A 3216-18 1.35 2.20 0.62 6.02 2.80 1.23 1.80 0.82 4.92 2.30 1.13 1.42 0.98 4.06 2.04 B 3528-21 2.35 2.21 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 C 6032-28 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74 D 7343-31 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 H 7360-20 4.25 2.77 3.67 10.22 7.30 4.13 2.37 3.87 9.12 6.80 4.03 1.99 4.03 8.26 6.54 J 7360-15 4.60 3.07 3.07 10.22 7.30 4.48 2.67 3.27 9.12 6.80 4.38 2.29 3.43 8.26 6.54 L 6032-19 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74 M 3528-15 2.35 2.20 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 Q 7343-12 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 T 3528-12 2.35 2.20 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 U 6032-15 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74 V 7343-21 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 W 7343-15 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 X1 7343-43 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 Y1 7343-40 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC-7351). Height of these chips may create problems in wave soldering. 2 Land pattern geometry is too small for silkscreen outline. V1 L L W W V2 S Grid Placement Courtyard (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 28 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Table 2 - Land Dimensions/Courtyard cont'd T527 KEMET Metric Size Code Dimensions (mm) Minimum - Maximum Case EIA G Z X Y I 3216-10 1.00 - 1.65 3.25 - 3.80 1.1 - 1.30 0.8 - 1.40 (JEITA RC-2371 is recommended for reference) X X G Z Y Y T529 KEMET Metric Size Code Dimensions (mm) Minimum - Maximum Case EIA G Z X Y I 3216-10 1.00 - 1.65 3.25 - 3.80 1.1 - 1.30 0.8 - 1.40 P 2012-10 0.40 - 1.05 2.05 - 2.60 0.80 - 1.00 0.5 - 1.1 (JEITA RC-2371 is recommended for reference) X X Y G Z Y (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 29 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Soldering Process Please note that although the X/7343-43 case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. Hand soldering should be performed with care due to the difficulty in process control. If performed, care should be taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow occurs. Once reflow occurs, the iron should be removed immediately. "Wiping" the edges of a chip and heating the top surface is not recommended. Profile Feature SnPb Assembly Pb-Free Assembly Preheat/Soak Temperature Minimum (TSmin) 100C 150C Temperature Maximum (TSmax) 150C 200C Time (ts) from Tsmin to Tsmax) 60 - 120 seconds 60 - 120 seconds Ramp-up Rate (TL to TP) 3C/seconds maximum 3C/seconds maximum Liquidous Temperature (TL) 183C 217C Time Above Liquidous (tL) 60 - 150 seconds 220C* 235C** 60 - 150 seconds 250C* 260C** Peak Temperature (TP) Time within 5C of Maximum 20 seconds maximum 30 seconds maximum Peak Temperature (tP) Ramp-down Rate (TP to TL) 6C/seconds maximum 6C/seconds maximum Time 25C to Peak 6 minutes maximum 8 minutes maximum Temperature Note: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. * For Case Size height > 2.5 mm ** For Case Size height 2.5 mm TP TL Temperature The KEMET families of surface mount capacitors are compatible with wave (single or dual), convection, IR, or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J-STD-020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions. tP Maximum Ramp-up Rate = 3C/second Maximum Ramp-down Rate = 6C/second tL Tsmax Tsmin 25 ts 25C to Peak Time Storage All KO-CAP Series are shipped in moisture barrier bags (MBBs) with desiccant and humidity indicator card (HIC). These parts are classified as MSL3 (Moisture Sensitivity Level 3) per IPC/JEDEC J-STD-020 and packaged per IPC/JEDEC J-STD-033. MSL3 specifies a floor time of 168H at 30C maximum temperature and 60% relative humidity. Unused capacitors should be sealed in a MBB with fresh desiccant. The calculated shelf life in a sealed bag would be 12 months from a bag seal date in a storage environment of < 40C and humidity < 90% RH. It should be 24 months from a bag seal date in a storage environment of < 30C and humidity < 70% RH. If baking is required, refer to IPC/JEDEC J-STD-033 for bake procedure. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 30 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Construction T520/T521/T525/T530 Molded Epoxy Case Detailed Cross Section Polarity Stripe (+) Silver Paint (Fourth Layer) Polarity Bevel (+) Wire Leadframe (- Cathode) Wire Weld (to attach wire) Carbon (Third Layer) Silver Adhesive Leadframe (+ Anode) Molded Epoxy Case Polymer (Second Layer) Ta2O5 Dielectric (First Layer) Tantalum T523 Polarity Stripe (+) Molded Epoxy Case Tantalum Wire Leadframe (- Cathode) Spacer Weld (to attach wire) Leadframe (+ Anode) (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com Detailed Cross Section Carbon (Third Layer) Silver Paint (Fourth Layer) Polymer (Second Layer) Ta2O5 Dielectric (First Layer) Tantalum Tantalum Wire T2076_T52X-530 * 3/11/2019 31 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Construction cont'd T527 Polarity Stripe (+) Detailed Cross Section Carbon (Third Layer) Silver Paint (Fourth Layer) Molded Epoxy Case Wire Wire Spacer Leadframe (- Cathode) Silver Adhesive Polymer (Second Layer) Ta2O5 Dielectric (First Layer) Tantalum Leadframe (+ Anode) Weld (to attach wire) T529 Polarity Stripe (+) Molded Epoxy Case Detailed Cross Section Carbon (Third Layer) Silver Paint (Fourth Layer) Wire (- Cathode) Polymer (Second Layer) Wire Spacer Substrate Silver Adhesive Weld (to attach wire) Ta2O5 Dielectric (First Layer) Tantalum (+ Anode) (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 32 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Capacitor Marking T520/T521/T523/T525/T530 (KO) KEMET Organic Polymer Date Code* Polarity Indicator (+) 1 digit = Last number of Year 5 = 2015 6 = 2016 7 = 2017 8 = 2018 9 = 2019 2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to 52 = 52nd week of the Year st Picofarad Code KEMET ID Rated Voltage Date Code* * 908 = 8th week of 2019 T520A/T527 Polarity Indicator (+) Code e g J A D E Rated Voltage 2.5 V 4V 6.3 V 10 V 20 V 25 V Date Code Voltage and Capacitance Code Code S A E7 J7 Capacitance 4.7 10 15 22 Code N7 S7 w A8 Capacitance 33 47 68 100 Code E8 J8 N8 S8 Capacitance 150 220 330 470 Date Code* Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2016 n p q r s t u v w x y z 2017 A B C D E F G H J K L M 2018 N P Q R S T U V W X Y Z 2019 a b c d e f g h j k l m (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 33 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Capacitor Marking cont'd T520B/T521B/T520T Polarity Indicator (+) Voltage and Capacitance Code ID Code Date Code T529 Polarity Indicator (+) Date Code Voltage and Capacitance Code Code e g J A D E Rated Voltage 2.5 V 4V 6.3 V 10 V 20 V 25 V Code S A E7 J7 Capacitance 4.7 10 15 22 Code N7 S7 w A8 Capacitance 33 47 68 100 Code E8 J8 N8 S8 Capacitance 150 220 330 470 Date Code* Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2016 n p q r s t u v w x y z 2017 A B C D E F G H J K L M 2018 N P Q R S T U V W X Y Z 2019 a b c d e f g h j k l m (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 34 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Tape & Reel Packaging Information KEMET's molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. Right hand orientation only (+) Embossed carrier (-) Embossment Top tape thickness 0.10 mm (0.004") maximum thickness 180 mm (7.0") or 330 mm (13.") 8 mm (0.315") or 12 mm (0.472") Table 3 - Packaging Quantity Case Code KEMET P R I S A T M B U L C Q W Z V D Y X J H O EIA 2012-10 2012-12 3216-10 3216-12 3216-18 3528-12 3528-15 3528-21 6032-15 6032-19 6032-28 7343-12 7343-15 7343-17 7343-19 7343-31 7343-40 7343-43 7360-15 7360-20 7360-43 Tape Width (mm) 7" Reel* 13" Reel* 8 8 8 8 8 8 8 8 12 12 12 12 12 12 12 12 12 12 12 12 12 3,000 2,500 3,000 2,500 2,000 3,000 2,500 2,000 1,000 1,000 500 1,000 1,000 1,000 1,000 500 500 500 1,000 1,000 250 N/A 10,000 N/A 10,000 N/A 10,000 8,000 8,000 5,000 3,000 3,000 3,000 3,000 3,000 3,000 2,500 2,000 2,000 3,000 3,000 1,000 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 35 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Figure 1 - Embossed (Plastic) Carrier Tape Dimensions P2 T T2 OD0 P0 (10 pitches cumulative tolerance on tape 0.2 mm) A0 E1 F K0 B1 E2 B0 S1 W P1 T1 Center Lines of Cavity B1 is for tape feeder reference only, including draft concentric about B0. Embossment For cavity size, see Note 1, Table 4 OD1 Cover Tape User Direction of Unreeling Table 4 - Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size 8 mm 12 mm D1 Minimum Note 1 D0 1.5 +0.10/-0.0 (0.059 +0.004/-0.0) 1.0 (0.039) 1.5 (0.059) E1 P0 R Reference S1 Minimum T1 T Maximum Note 2 Note 3 Maximum P2 1.75 0.10 4.0 0.10 2.0 0.05 (0.069 0.004) (0.157 0.004) (0.079 0.002) 25.0 (0.984) 30 (1.181) 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) Variable Dimensions -- Millimeters (Inches) Tape Size Pitch B1 Maximum Note 4 8 mm Single (4 mm) 4.35 (0.171) 6.25 (0.246) 12 mm Single (4 mm) and Double (8 mm) 8.2 (0.323) 10.25 (0.404) E2 Minimum F P1 3.5 0.05 2.0 0.05 or 4.0 0.10 (0.138 0.002) (0.079 0.002 or 0.157 0.004) 2.0 0.05 (0.079 0.002) or 5.5 0.05 4.0 0.10 (0.157 0.004) or (0.217 0.002) 8.0 0.10 (0.315 0.004) T2 Maximum W Maximum A0, B0 & K0 2.5 (0.098) 8.3 (0.327) 4.6 (0.181) 12.3 (0.484) Note 5 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape, with or without components, shall pass around R without damage (see Figure 4). 3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481-D, paragraph 4.3, section b). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20 maximum for 8 and 12 mm tapes (see Figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape (see Figure 3). (e) see Addendum in EIA Standard 481-D for standards relating to more precise taping requirements. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 36 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 Kg minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 Newton (10 to 100 gf) 12 mm 0.1 to 1.3 Newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA Standards 556 and 624. Figure 2 - Maximum Component Rotation T Maximum Component Rotation Top View Maximum Component Rotation Side View Typical Pocket Centerline Tape Width (mm) 8, 12 Bo Maximum Rotation ( 20 T) s Tape Maximum Width (mm) Rotation ( 8, 12 20 Typical Component Centerline S) Ao Figure 3 - Maximum Lateral Movement Figure 4 - Bending Radius 8 mm & 12 mm Tape 0.5 mm maximum 0.5 mm maximum Embossed Carrier Punched Carrier R (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com Bending Radius R T2076_T52X-530 * 3/11/2019 37 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Figure 5 - Reel Dimensions Full Radius, See Note W3 (Includes flange distortion at outer edge) Access Hole at Slot Location (O 40 mm minimum) W2 D A (See Note) N C (Arbor hole diameter) B (see Note) (Measured at hub) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 5 - Reel Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size A B Minimum C D Minimum 8 mm 178 0.20 (7.008 0.008) or 330 0.20 (13.000 0.008) 1.5 (0.059) 13.0 +0.5/-0.2 (0.521 +0.02/-0.008) 20.2 (0.795) 12 mm Variable Dimensions -- Millimeters (Inches) Tape Size 8 mm 12 mm N Minimum W1 W2 Maximum W3 50 (1.969) 8.4 +1.5/-0.0 (0.331 +0.059/-0.0) 12.4 +2.0/-0.0 (0.488 +0.078/-0.0) 14.4 (0.567) 18.4 (0.724) Shall accommodate tape width without interference (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 38 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors Figure 6 - Tape Leader & Trailer Dimensions Embossed Carrier Punched Carrier 8 mm & 12 mm only END Carrier Tape Round Sprocket Holes START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) Trailer 160 mm minimum Components 100 mm minimum Leader 400 mm minimum Top Cover Tape Figure 7 - Maximum Camber Elongated Sprocket Holes (32 mm & wider tapes) Carrier Tape Round Sprocket Holes 1 mm maximum, either direction Straight Edge 250 mm (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 39 KEMET Organic Capacitor (KO-CAP (R)) T52x/T530 Polymer Electrolytic Capacitors KEMET Electronics Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the "Information") in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation's ("KEMET") knowledge of typical operating conditions for such applications, but are not intended to constitute - and KEMET specifically disclaims - any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET's products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2076_T52X-530 * 3/11/2019 40