1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
One world. One KEMET
Overview
The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable
of delivering very low ESR and improved capacitance retention at high frequencies. KO-CAP combines the low ESR of
multilayer ceramic, the high capacitance of aluminum electrolytic, and the volumetric eciency of tantalum into a single
surface mount package. Unlike liquid electrolyte-based capacitors, KO-CAP has a very long operational life and high ripple
current capabilities.
The T52X/T530 provides the widest range of voltages, capacitance and case size options in the KO-CAP family and is
suitable for general purpose DC applications for up to 48 volt DC voltage rails.
Benets
• ESR values down to 5 mΩ
• Stable capacitance across temperature and voltage
• No aging effects
• High ripple handling
• Volumetrically ecient
• High frequency capacitance retention
• 100% accelerated steady state aging
• 100% surge current tested
• Halogen-free epoxy and RoHS compliant
Applications
Typical applications include DC/DC converters, audio/sound circuits (mobile phone and base stations, smart phones, MP3
players), power supply inputs, portable electronics (notebook PCs, displays, SSDs, HDDs and USBs, digital cameras, GPS
navigation systems, WiFi modules), telecommunications, consumer electronics (analytical and test equipment, high speed
servers), high voltage applications such as 12 V to 48 V power input rails, densely populated circuits with space restrictions,
microprocessor decoupling, and high ripple current applications.
KEMET Organic Capacitor (KO-CAP®)
T52X/T530 Polymer Electrolytic Capacitors
2© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
2
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Environmental Compliance
• RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn, Ni-Pd-Au or
non-magnetic 100% Sn solder
• Halogen-free
• Epoxy compliant with UL94 V-0
K-SIM
For a detailed analysis of specic part numbers, please visit ksim.kemet.com to access KEMET’s K-SIM software. KEMET
K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels.
Series Reference Selection
Series Voltage Range Temperature Rating Special Features
< 1 V to 9 V
Applications
12 V to 48 V
Applications 85°C Rated 105°C Rated 125°C Rated Miniature Size Low ESL
T520 Standard X * X** X
T521 High Voltage XXX
T523 Facedown
Terminal XX** XX** X
T525 High Temperature X * X
T527 Small Size X X X
T529 Miniature X X X X
T530 High Cap/
Low ESR X X XX
* Not recommended for new design.
** Selected values.
3© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
3
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Ordering Information
T520 V157 M006 A T E045
Capacitor
Class Series Case
Size1
Capacitance Code
(pF)
Capacitance
Tolerance
Rated
Voltage
(VDC)
Failure
Rate/
Design
Termination Finish ESR Code Packaging
(C-Spec)
T =
Tantalum
520 = Polymer
521 = High
voltage
523 = Facedown
terminal
525 = 125°C
rated
527 = Facedown
terminal
529 = Substrate
terminal
530 = 125°C High
capacitance
A
B
C
D
H
I
J
L
M
P
Q
T
U
V
W
X
Y
First two digits
represent
signicant
gures. Third
digit species
number of
zeros.
K = ±10%
M = ±20%
002 = 2
2R5 = 2.5
003 = 3
004 = 4
006 = 6.3
008 = 8
010 = 10
011 = 11
12R = 12.5
016 = 16
020 = 20
025 = 25
035 = 35
050 = 50
063 = 63
075 = 75
A =
N/A
T = 100% Matte tin
(Sn)-plated
H*** = Tin/lead
(SnPb) solder coated
(5% Pb minimum)
P* = Ni-Pd-Au-plated
N = Non-magnetic
100% Tin (Sn)
M = Non-magnetic
(SnPb)
A** = Ni-Au
E = ESR
last three
digits
specify ESR
in mΩ
(045 = 45
mΩ)
Blank = 7" reel
7280**** = 13"
reel
Gold termination available upon request
* P termination only available on select part numbers
** A termination only available on T529 part numbers
*** H termination not available for T527/T529 part numbers
**** 13" reel not available for T520A case and some other part numbers
Performance Characteristics
Item Performance Characteristics
Operating Temperature −55°C to 85°C/105°C/125°C (refer to part number for maximum temperature rating)
Rated Capacitance Range 4.7 – 1,500 µF at 120 Hz/25°C
Capacitance Tolerance K tolerance (10%), M tolerance (20%)
Rated Voltage Range 2 – 75 V
DF (120 Hz) Refer to Part Number Electrical Specication Table*
ESR (100 kHz) Refer to Part Number Electrical Specication Table**
Leakage Current Refer to Part Number Electrical Specication Table
* For T529 Series DF measurement apply 1.5 V DC
** For PN T520B477M2R5ATE014 the ESR measurement should be taken at 300 to 500kHz
4© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
4
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Qualication
Test Condition Characteristics
Endurance
Temperature: 85°C, 105°C, 125°C**
Voltage: 1.0 Rated Voltage
2/3 Rated Voltage for 125°C rating PN
Time: 2,000 Hours
1,000 Hours for T527/T529***
Δ C/C
Within −20%/+10% of initial value
T527 and T529: Within initial DC/C limits
DF
Within initial limits
T527 and T529: Within 1.5 x initial limits***
DCL
85°C and 105°C rated parts: Within 1.25 x initial limit
125°C rated parts: Within 2.0 x initial limits
T527: Within initial limits
T529: Within 3.0 x initial limits
ESR
Within 2.0 x initial limit
(N/A for T527 and T529***)
Storage Life
Temperature: 105°C, 125°C**
Voltage: 0 Voltage
Time: 2,000 Hours
(N/A for T527 and T529***)
Δ C/C Within −20%/+10% of initial value
DF Within initial limits
DCL
Within 1.25 x initial limit
T521: 1.25 x IL at 105°C, 2x IL at 125°C
T525/T530: Within 2.0 x initial limit
ESR Within 2.0 x initial limit
Humidity
Temperature: 60°C
Voltage: No Load
Humidity: 90% RH
Time: 500 Hours, 1,000 Hours (T525, T530)
Δ C/C
Within −5%/+35% of initial value
T527/T529: −20% to +30% of initial DC/C limit
T520B477M2R5ATE014: −20% to +50% of initial DC/C limit
DF
Within initial limits
T527/T529: Within 1.5 x initial limits***
DCL
Within 5.0 x initial limit
T521/T525/T529/T530: Within 3.0 x initial limit***
T527: Within initial limits
ESR
Within 2.0 x initial limit
T525/T527/T529/T530: N/A***
Temperature
Stability
Extreme temperature exposure at
a succession of continuous steps
at +25°C, −55°C, +25°C, +85°C,
+105°/125°C, +25°C
+25°C −55°C +85°C +105º/125°C
Δ
C/C IL*
±20%
−20% - 0%
of DC/C
(T527/29)***
±20%
±30%
+50% - 0% of
DC/C (T527/29)***
DF IL IL 1.2 x IL 1.5 x IL
IL (T529)
DCL IL N/A
IL (T529) 10 x IL 10 x IL
1.25 CV (T529)
Surge Voltage
Temperature: 105°C, 85°C** (T527/T529)
Voltage: 1.32 x Rated voltage
Time: 1,000 cycles
Δ C/C
Within −20%/+10% of initial value
T527/T529 Series: Within initial DC/C limits
DF Within initial limits
DCL Within initial limits
ESR
Within initial limits
T527/T529 Series: N/A
Mechanical
Shock/Vibration
MIL–STD–202, Method 213, Condition I,
100 G Peak.
Δ C/C
Within ±10% of initial value
Within initial DC/C limits
MIL–STD–202, Method 204, Condition D,
10 Hz to 2,000 Hz, 20 G peak
DF Within initial limits
DCL Within initial limits
*IL = Initial limit
**Refer to part number specications for individual temperature classication.
***This condition/exclusion applies also to PN T520B477M2R5ATE014
5© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
5
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Reliability
KO-CAP capacitors have an average failure rate of 0.5 %/1,000 hours at category voltage, UC, and category temperature,
TC. These capacitors are qualied using industry test standards at UC and TC. The minimum test time (1,000 hours or 2,000
hours) is dependent on the product.
The actual life expectancy of KO-CAP capacitors increases when application voltage, UA, and application temperature, TA,
are lower than UC and TC. As a general guideline, when UA < 0.9 * UC and TA < 85°C, the life expectancy will typically exceed
the useful lifetime of most hardware (> 10 years).
The lifetime of a KO-CAP capacitor at a specic application voltage and temperature can be modeled using the equations
below. A failure is dened as passing enough current to blow a 1-amp fuse. The calculation is an estimation based on
empirical results and is not a guarantee.
TAF = e[ ( )]
Ea
k
1
273+TA
1
273+TC
TAF = acceleration factor due to temperature, unitless
where:
Ea = activation energy, 1.4 eV
k = Boltzmann’s constant, 8.617E-5 eV/K
TA = application temperature, °C
TC = category temperature, °C
VAF = ( )
UC
UA
n
VAF = acceleration factor due to voltage, unitless
where:
UC = category voltage, volt
UA = application voltage, volt
n = exponent, 16
AF = VAF * TAF
AF = acceleration factor, unitless
where:
TAF = accerlation factor due to temperature, unitless
VAF = acceleration factor due to voltage, unitless
* AFLifeUA ,TA= LifeUC ,TC
LifeUA, TA = guaranteed life application voltage
and temperature, years
where:
AF = acceleration factor, unitless
LifeUC, TC = guaranteed life category voltage
and temperature, years
Terms:
Category voltage, UC : maximum recommended peak DC operating voltage for continuous operation at the category temperature, TC
Rated voltage, UR : maximum recommended peak DC operating voltage for continuous operation up to the rated temperature, TR
Category temperature, TC : maximum recommended operating temperature. Voltage derating may be required at TC
Rated temperature, TR : maximum recommended operating temperature without voltage derating. TR is equal to or lower than TC
Reliability Table 1 – Common temperature range classications
85°C (TR) /
85°C (TC)
Rated Voltage (U
R
)2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0
Category Voltage (U
C
)2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0
105°C (TR) /
105°C (TC)
Rated Voltage (T
R
)2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0
Category Voltage (U
C
)2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0
105°C (TR) /
125°C (TC)
Rated Voltage (T
R
)2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0
Category Voltage (U
C
)1.7 2.7 4.2 5.4 6.7 8.4 10.7 13.4 16.8 23.5 33.5 42.2 50.3
6© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
6
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
1
10
100
1000
100 1,000 10,000 100,000 1,000,000 10,000,000
Capacitance (uF)
Frequency (Hz)
T520B157M006ATE035
T520C227M006ATE025
T520V337M006ATE015
T520D337M006ATE009
1
10
100
100 1,000 10,000 100,000 1,000,000 10,000,000
T521V476M020ATE055
T521V336M025ATE060
T521V156M035ATE100
Capacitance (µF)
Frequency (Hz)
1
10
100
1,000
100 1,000 10,000 100,000 1,000,000 10,000,000
Capacitance (μF)
Frequency (Hz)
T530D227M006ATE006
T530Y337M006ATE005
T530X477M006ATE004
Capacitance vs. Frequency
Capacitance vs. Frequency
Capacitance vs. Frequency
T530 High Cap/Low ESR (2 V – 10 V)
T521 High Voltage (12 V – 75 V)
T520 Standard (2 V – 10 V)
ESR vs. Frequency
ESR vs. Frequency
ESR vs. Frequency
0.001
0.01
0.1
1
10
100
100 1,000 10,000 100,000 1,000,000 10,000,000
Impedance,ESR (Ohms)
Frequency (Hz)
T520B157M006ATE035_Imp
T520C227M006ATE025_Imp
T520V337M006ATE015_Imp
T520D337M006ATE009_Imp
T520B157M006ATE035_ESR
T520C227M006ATE025_ESR
T520V337M006ATE015_ESR
T520D337M006ATE009_ESR
0.01
0.1
1
10
100
100 1,000 10,000 100,000 1,000,000 10,000,000
Impedance, ESR (Ohms)
Frequency (Hz)
T521V476M020ATE055_Imp
T521V336M025ATE060_Imp
T521V156M035ATE100_Imp
T521V476M020ATE055_ESR
T521V336M025ATE060_ESR
T521V156M035ATE100_ESR
0.001
0.01
0.1
1
10
100 1,000 10,000 100,000 1,000,000 10,000,00
0
Impedance, ESR (Ohms)
Frequency (Hz)
T530D227M006ATE006_Imp
T530Y337M006ATE005_Imp
T530X477M006ATE004_Imp
T530D227M006ATE006_ESR
T530Y337M006ATE005_ESR
T530X477M006ATE004_ESR
Electrical Characteristics
7© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
7
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Dimensions – Millimeters (Inches)
Metric will govern
T520/T521/T525/T530
H
X
T
B
B
F
A
L
R
P
SIDE VIEW
ANODE (+) END VIEW BOTTOM VIEW
CATHODE (-) END VIEW
W
S
S
Termination cutout
at KEMET's option,
either end
For T520 Series, bevel
is at KEMET's option
Glue pad
shape/design at
KEMET's option
Case
Size Component Dimensions
KEMET EIA L W H F
±0.1 ±(0.004)
S
±0.3 ±(0.012)
S1 ±0.4 (0.0157)
S2 ±0.2 (0.00)
B ±0.15
(Ref) ±0.006
X
(Ref)
P
(Ref)
R
(Ref)
T
(Ref)
A
(Min)
Typical
Weight
(mg)
A
3216-18
3.2 ±0.2
(0.126 ±0.008)
1.6 ±0.2
(0.063 ±0.008)
1.6 ±0.2
(0.063 ±0.008)
1.2
(0.047)
0.8
(0.032) N/A 0.10 ±0.10
(0.004 ±0.004)
0.4
(0.016)
0.4
(0.016)
0.13
(0.005)
1.2
(0.047) 53
B3528-
21
3.5 ±0.2
(0.138 ±0.008)
2.8 ±0.2
(0.110 ±0.008)
1.9 ±0.2
(0.075 ±0.008)
2.2
(0.087)
0.8
(0.032)
0.4
(0.016)
0.10 ±0.10
(0.004 ±0.004)
0.5
(0.020)
1.0
(0.039)
0.13
(0.005)
1.9
(0.075) 95
C6032-
28
6.0 ±0.3
(0.236 ±0.012)
3.2 ±0.3
(0.126 ±0.012)
2.5 ±0.3
(0.098 ±0.012)
2.2
(0.087)
1.30
(0.051)
0.5
(0.020)
0.10 ±0.10
(0.004 ±0.004)
0.9
(0.035)
1.0
(0.039)
0.13
(0.005)
2.9
(0.114) 184
D7343-
31
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
2.8 ±0.3
(0.110 ±0.012)
2.4
(0.094)
1.30
(0.051)
0.5
(0.020)
0.10 ±0.10
(0.004 ±0.004)
0.9
(0.035)
1.0
(0.039)
0.13
(0.005)
3.6
(0.142) 435
H7360-
20
7.3 ±0.3
(0.287 ±0.012)
6.0 ±0.3
(0.236 ±0.012)
1.9 ±0.1
(0.075 ±0.004)
4.1
(0.161)
1.3
(0.051) N/A 0.10 ±0.10
(0.004 ±0.004) N/A N/A 0.13
(0.005)
3.3
(0.130) 385
J
7360-15
7.3 ±0.3
(0.287 ±0.012)
6.0 ±0.3
(0.236 ±0.012)
1.5 (0.059)
Maximum
4.1
(0.161)
1.3
(0.051) N/A 0.10 ±0.10
(0.004 ±0.004) N/A N/A N/A 3.3
(0.130) 263
L
6032-19
6.0 ±0.3
(0.236 ±0.012)
3.2 ±0.2
(0.110 ±0.008)
1.8 ±0.1
(0.071 ±0.004)
2.2
(0.087)
1.3
(0.051) N/A 0.05
(0.002) N/A N/A 0.13
(0.005)
2.5
(0.098) 187
M
3528-15
3.5 ±0.2
(0.138 ±0.008)
2.8 ±0.2
(0.110 ±0.008)
1.4 ±0.1
(0.055 ±0.004)
2.2
(0.087)
0.8
(0.031) N/A 0.05
(0.002) N/A N/A 0.13
(0.005)
1.1
(0.043) 98
Q7343-
12
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
1.1 ±0.1
(0.043 ±0.004)
2.4
(0.094)
1.3
(0.051) N/A 0.05
(0.002) N/A N/A 0.13
(0.005)
3.8
(0.150) 170
T
3528-12
3.5 ±0.2
(0.138 ±0.008)
2.8 ±0.2
(0.110 ±0.008)
1.1 ±0.1
(0.043 ±0.004)
2.2
(0.087)
0.8
(0.032) N/A 0.05
(0.002) N/A N/A 0.13
(0.005)
1.9
(0.075) 55
U
6032-15
6.0 ±0.3
(0.236 ±0.012)
3.2 ±0.3
(0.126 ±0.012)
1.4 ±0.1
(0.055 ±0.004)
2.2
(0.087)
1.3
(0.051) N/A 0.05
(0.002) N/A N/A 0.13
(0.005)
2.9
(0.114) 117
V7343-
19
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
1.8 ±0.1*
(0.071±0.004)
2.4
(0.094)
1.3
(0.051) N/A 0.05
(0.002) N/A N/A 0.13
(0.005)
3.6
(0.142) 274
W7343-
15
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
1.4 ±0.1
(0.055 ±0.004)
2.4(0.094)
2.8 ±0.2
(0.110 ±0.0079)**
1.30 (0.051)
S1 = 5.0 (0.197)**
S2 = 1.3 (0.051)**
N/A 0.05
(0.002) N/A N/A 0.13
(0.005)
3.6
(0.142) 223
X7343-
43
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
4.0 ±0.3
(0.157 ±0.012)
2.4
(0.094)
1.3
(0.051)
0.5
(0.020)
0.10 ±0.10
(0.004 ±0.004)
1.7
(0.067)
1.0
(0.039)
0.13
(0.005)
3.6
(0.142) 554
Y7343-
40
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
3.8 ±0.2
(0.150 ±0.008)
2.4
(0.094)
1.3
(0.051)
0.5
(0.020)
0.10 ±0.10
(0.004 ±0.004)
1.7
(0.067)
1.0
(0.039)
0.13
(0.005)
3.8
(0.150) 494
* Height tolerance is ±0.2 for V case T521 only
** S1 and S2 is for T528 series only
8© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
8
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Dimensions – Millimeters cont'd
T523
SIDE VIEW
BOTTOM VIEW
END VIEW
F
S
S
W L
H
KEMET EIA L W H F ±0.1
(±0.004)
S ±0.3
(±0.012)
Typical
Weight
(mg)
W7343-15
1.4±0.1
(0.055±0.004)
2.4
(0.094)
1.3
(0.051)
223
J7360-15
1.4±0.1
(0.055±0.004)
4.45
(0.175)
1.6
(0.063)
263
V7343-20
1.9±0.1
(0.075±0.004)
2.4
(0.094)
1.3
(0.051)
274
H7360-20
1.9±0.1
(0.075±0.004)
4.45
(0.175)
1.6
(0.063)
385
T527
H
SIDE VIEW
BOTTOM VIEW
END VIEW
W L
F
SS
Case Size Component Dimensions Typical Weight
KEMET EIA L W H F S (mg)
I3216–10 3.2±0.2 1.6±0.2 0.9±0.1 1.2±0.1 0.8±0.2 70
T529
H
SIDE VIEW
BOTTOM VIEW
END VIEW
W L
F
S
S
Case Size Component Dimensions Typical Weight
KEMET EIA L W H F S (mg)
P2012–10 2.0±0.1 1.25±0.1 1.0 maximum 0.9±0.1 0.55±0.1 11.4
I3216–10 3.2±0.2 1.6±0.2 1.0 maximum 1.2±0.1 0.8±0.1 70
9© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
9
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
Refer to Ordering Information for additional detail.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
Not all
parts are
105°C rated
µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
2470 V/7343-19 T520V477M002A(1)E040 94 10 40 2200 3105
2.5 47 A/3216-18 T520A476M2R5A(1)E090^ 11.75 890 1100 3105
2.5 68 A/3216-18 T520A686M2R5A(1)E070^ 17 870 1300 3105
2.5 68 A/3216-18 T520A686M2R5A(1)E080^ 17 880 1200 3105
2.5 100 T/3528-12 T520T107M2R5A(1)E040 25 840 1600 3105
2.5 100 T/3528-12 T520T107M2R5A(1)E070 25 870 1200 3105
2.5 100 T/3528-12 T525T107M2R5A(1)E080 25 10 80 1100 3125
2.5 100 B/3528-21 T520B107M2R5A(1)E025 25 825 2300 3105
2.5 100 B/3528-21 T520B107M2R5A(1)E035 25 835 1900 3105
2.5 100 B/3528-21 T520B107M2R5A(1)E040 25 840 1800 3105
2.5 100 B/3528-21 T520B107M2R5A(1)E070 25 870 1300 3105
2.5 150 U/6032-15 T520U157M2R5A(1)E055 37.5 855 1600 3105
2.5 220 A/3216-18 T520A227M2R5A(1)E025^ 55 825 1732 3105
2.5 220 A/3216-18 T520A227M2R5A(1)E035^ 55 835 1500 3105
2.5 220 B/3528-21 T520B227M2R5A(1)E015 55 815 2900 3105
2.5 220 B/3528-21 T520B227M2R5A(1)E018 55 818 2700 3105
2.5 220 B/3528-21 T520B227M2R5A(1)E021 55 821 2500 3105
2.5 220 B/3528-21 T520B227M2R5A(1)E025 55 825 2300 3105
2.5 220 B/3528-21 T520B227M2R5A(1)E030 55 830 2100 3105
2.5 220 B/3528-21 T520B227M2R5A(1)E035 55 835 1900 3105
2.5 220 B/3528-21 T520B227M2R5A(1)E055 55 855 1500 3105
2.5 220 B/3528-21 T520B227M2R5A(1)E070 55 870 1300 3105
2.5 220 T/3528-12 T520T227M2R5ATE070^ 55 10 70 1200 3105
2.5 220 U/6032-15 T520U227M2R5A(1)E055 55 855 1600 3105
2.5 220 C/6032-28 T520C227M2R5A(1)E025 55 825 2600 3105
2.5 220 C/6032-28 T520C227M2R5A(1)E045 55 845 1900 3105
2.5 220 W/7343-15 T520W227M2R5A(1)E025 55 10 25 2700 3105
2.5 220 V/7343-19 T520V227M2R5A(1)E006 55 10 65600 3105
2.5 220 V/7343-19 T520V227M2R5A(1)E007 55 10 75200 3105
2.5 220 V/7343-19 T520V227M2R5A(1)E009 55 10 94600 3105
2.5 220 V/7343-19 T520V227M2R5A(1)E012 55 10 12 3900 3105
2.5 220 V/7343-19 T520V227M2R5A(1)E015 55 10 15 3500 3105
2.5 220 V/7343-19 T520V227M2R5A(1)E025 55 10 25 2700 3105
2.5 220 V/7343-19 T520V227M2R5A(1)E045 55 10 45 2000 3105
2.5 220 D/7343-31 T520D227M2R5A(1)E007 55 10 75700 3105
2.5 220 D/7343-31 T520D227M2R5A(1)E040 55 10 40 2400 3105
2.5 330 B/3528-21 T520B337M2R5ATE009^ 82.5 8 9 3073 3105
2.5 330 B/3528-21 T520B337M2R5ATE012^ 83 812 2700 3105
2.5 330 B/3528-21 T520B337M2R5A(1)E015 82.5 815 2900 3105
2.5 330 B/3528-21 T520B337M2R5A(1)E018 82.5 818 2700 3105
2.5 330 B/3528-21 T520B337M2R5A(1)E035 82.5 835 1900 3105
2.5 330 B/3528-21 T520B337M2R5A(1)E045 82.5 845 1700 3105
2.5 330 B/3528-21 T520B337M2R5A(1)E070 82.5 870 1300 3105
VDC at 105°C µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
Rated
Voltage Rated
Capacitance Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL Maximum
Operating Temp
10© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
10
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
Refer to Ordering Information for additional detail.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
Not all
parts are
105°C rated
µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
2.5 330 C/6032-28 T520C337M2R5A(1)E015 82.5 815 3300 3105
2.5 330 C/6032-28 T520C337M2R5A(1)E018 82.5 818 3000 3105
2.5 330 C/6032-28 T520C337M2R5A(1)E025 82.5 825 2600 3105
2.5 330 C/6032-28 T520C337M2R5A(1)E045 82.5 845 1900 3105
2.5 330 L/6032-19 T520L337M2R5A(1)E009 82.5 8 9 4100 3105
2.5 330 L/6032-19 T520L337M2R5A(1)E012 82.5 812 3500 3105
2.5 330 L/6032-19 T520L337M2R5A(1)E025 82.5 825 2400 3105
2.5 330 W/7343-15 T520W337M2R5A(1)E015 82.5 10 15 3500 3105
2.5 330 W/7343-15 T520W337M2R5A(1)E025 82.5 10 25 2700 3105
2.5 330 W/7343-15 T520W337M2R5A(1)E040 82.5 10 40 2100 3105
2.5 330 V/7343-19 T520V337M2R5A(1)E006 82.5 10 65600 3105
2.5 330 V/7343-19 T520V337M2R5A(1)E007 82.5 10 75200 3105
2.5 330 V/7343-19 T520V337M2R5A(1)E009 82.5 10 94600 3105
2.5 330 V/7343-19 T520V337M2R5A(1)E012 82.5 10 12 3900 3105
2.5 330 V/7343-19 T520V337M2R5A(1)E015 82.5 10 15 3500 3105
2.5 330 V/7343-19 T520V337M2R5A(1)E018 82.5 10 18 3200 3105
2.5 330 V/7343-19 T520V337M2R5A(1)E025 82.5 10 25 2700 3105
2.5 330 V/7343-19 T520V337M2R5A(1)E040 82.5 10 40 2200 3105
2.5 330 D/7343-31 T520D337M2R5A(1)E006 82.5 10 66100 3105
2.5 330 D/7343-31 T520D337M2R5A(1)E007 82.5 10 75700 3105
2.5 330 D/7343-31 T525D337M2R5A(1)E025 82.5 10 25 3000 3125
2.5 470 B/3528-21 T520B477M2R5ATE014^ 188 814 3000 385
2.5 470 V/7343-19 T520V477M2R5A(1)E006 117.5 10 65600 3105
2.5 470 V/7343-19 T520V477M2R5A(1)E007 117.5 10 75200 3105
2.5 470 V/7343-19 T520V477M2R5A(1)E009 117.5 10 94600 3105
2.5 470 V/7343-19 T520V477M2R5A(1)E012 117.5 10 12 3900 3105
2.5 470 V/7343-19 T520V477M2R5A(1)E015 117.5 10 15 3500 3105
2.5 470 V/7343-19 T520V477M2R5A(1)E018 117.5 10 18 3200 3105
2.5 470 C/6032-28 T520C477M2R5A(1)E025 117.5 825 2600 3105
2.5 470 C/6032-28 T520C477M2R5A(1)E045 117.5 845 1900 3105
2.5 470 D/7343-31 T530D477M2R5A(1)E005 117.5 8 5 7100 3125
2.5 470 D/7343-31 T520D477M2R5A(1)E006 117.5 10 66100 3105
2.5 470 D/7343-31 T530D477M2R5A(1)E006 117.5 8 6 6500 3125
2.5 470 D/7343-31 T520D477M2R5A(1)E007 117.5 10 75700 3105
2.5 470 D/7343-31 T520D477M2R5A(1)E009 117.5 10 95000 3105
2.5 470 D/7343-31 T530D477M2R5A(1)E010 117.5 810 5000 3125
2.5 470 D/7343-31 T525D477M2R5A(1)E025 117.5 10 25 3000 3125
2.5 560 D/7343-31 T530D567M2R5A(1)E005 140 8 5 7100 3125
2.5 680 D/7343-31 T530D687M2R5A(1)E006 170 8 6 6500 3125
2.5 680 D/7343-31 T530D687M2R5A(1)E007 170 8 7 6000 3125
2.5 680 D/7343-31 T520D687M2R5A(1)E010 170 10 10 4700 3105
2.5 680 D/7343-31 T530D687M2R5A(1)E010 170 810 5000 3125
2.5 680 D/7343-31 T520D687M2R5A(1)E015 170 10 15 3900 3105
VDC at 105°C µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
Rated
Voltage Rated
Capacitance Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL Maximum
Operating Temp
11© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
11
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
Refer to Ordering Information for additional detail.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
Not all
parts are
105°C rated
µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
2.5 680 D/7343-31 T525D687M2R5A(1)E025 170 10 25 3000 3125
2.5 680 D/7343-31 T520D687M2R5A(1)E040 170 10 40 2400 3105
2.5 680 Y/7343-40 T530Y687M2R5A(1)E005 170 8 5 7300 3125
2.5 680 Y/7343-40 T530Y687M2R5A(1)E006 170 8 6 6600 3125
2.5 680 Y/7343-40 T530Y687M2R5A(1)E007 170 8 7 6100 3125
2.5 680 Y/7343-40 T520Y687M2R5A(1)E015 170 10 15 4000 3105
2.5 680 Y/7343-40 T520Y687M2R5A(1)E025 170 10 25 3100 3105
2.5 680 X/7343-43 T530X687M2R5A(1)E006 170 8 6 6700 3 125
2.5 1000 D/7343-31 T520D108M2R5A(1)E4R5 250 10 4.5 7100 3105
2.5 1000 D/7343-31 T520D108M2R5A(1)E006 250 10 66100 3105
2.5 1000 D/7343-31 T520D108M2R5A(1)E007 250 10 75700 3105
2.5 1000 D/7343-31 T520D108M2R5A(1)E009 250 10 95000 3105
2.5 1000 D/7343-31 T520D108M2R5A(1)E010 250 10 10 4700 3105
2.5 1000 D/7343-31 T520D108M2R5A(1)E015 250 10 15 3900 3105
2.5 1000 D/7343-31 T520D108M2R5A(1)E030 250 10 30 2700 3105
2.5 1000 Y/7343-40 T530Y108M2R5A(1)E005 250 8 5 7300 3125
2.5 1000 Y/7343-40 T530Y108M2R5A(1)E006 250 8 6 6600 3125
2.5 1000 Y/7343-40 T520Y108M2R5A(1)E010 250 10 10 4900 3105
2.5 1000 Y/7343-40 T520Y108M2R5A(1)E015 250 10 15 4000 3105
2.5 1000 Y/7343-40 T520Y108M2R5A(1)E025 250 10 25 3100 3105
2.5 1000 X/7343-43 T530X108M2R5A(1)E004 250 8 4 8200 3125
2.5 1000 X/7343-43 T530X108M2R5A(1)E005 250 8 5 7300 3125
2.5 1000 X/7343-43 T530X108M2R5A(1)E006 250 8 6 6700 3 125
2.5 1000 X/7343-43 T520X108M2R5A(1)E010 250 10 10 5000 3105
2.5 1500 X/7343-43 T530X158M2R5A(1)E005 375 8 5 7300 3125
2.5 1500 X/7343-43 T520X158M2R5A(1)E015 375 10 15 4100 3105
3100 B/3528-21 T525B107M003A(1)E080 30 880 1300 3125
3100 B/3528-21 T520B107M003A(1)E025 30 825 2300 3105
3100 B/3528-21 T520B107M003A(1)E035 30 835 1900 3105
3100 B/3528-21 T520B107M003A(1)E040 30 840 1800 3105
3100 B/3528-21 T520B107M003A(1)E070 30 870 1300 3105
3150 B/3528-21 T520B157M003A(1)E025 45 825 2300 3105
3150 B/3528-21 T520B157M003A(1)E035 45 835 1900 3105
3150 B/3528-21 T520B157M003A(1)E040 45 840 1800 3105
3150 B/3528-21 T520B157M003A(1)E070 45 870 1300 3105
3150 B/3528-21 T525B157M003A(1)E080 45 880 1300 3125
3330 V/7343-19 T520V337M003A(1)E009 99 10 94600 3105
3330 V/7343-19 T520V337M003A(1)E012 99 10 12 3900 3105
3330 V/7343-19 T520V337M003A(1)E015 99 10 15 3500 3105
3330 V/7343-19 T520V337M003A(1)E025 99 1025 2700 3105
3330 D/7343-31 T525D337M003A(1)E025 99 10 25 3000 3125
3470 D/7343-31 T530D477M003A(1)E010 141 810 5000 3125
3470 D/7343-31 T525D477M003A(1)E025 141 10 25 3000 3125
VDC at 105°C µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
Rated
Voltage Rated
Capacitance Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL Maximum
Operating Temp
12© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
12
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
Refer to Ordering Information for additional detail.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
Not all
parts are
105°C rated
µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
3680 D/7343-31 T530D687M003A(1)E010 204 810 5000 3125
3680 D/7343-31 T520D687M003A(1)E015 204 10 15 3900 3105
3680 D/7343-31 T525D687M003A(1)E025 204 10 25 3000 3125
3680 D/7343-31 T520D687M003A(1)E040 204 10 40 2400 3105
31000 X/7343-43 T530X108M003A(1)E010 300 810 5200 3125
31000 X/7343-43 T520X108M003A(1)E015 300 10 15 4100 3105
31000 X/7343-43 T520X108M003A(1)E030 300 10 30 2900 3105
31500 X/7343-43 T530X158M003A(1)E008 450 8 8 5800 3125
415 T/3528-12 T520T156M004A(1)E100 6 8 100 1000 3105
433 A/3216-18 T520A336M004A(1)E070^ 13.2 870 1300 3105
433 A/3216-18 T520A336M004A(1)E080^ 13.2 880 1200 3105
447 A/3216-18 T520A476M004A(1)E070^ 18.8 870 1300 3105
447 A/3216-18 T520A476M004A(1)E080^ 18.8 880 1200 3105
447 T/3528-12 T520T476M004A(1)E070 18.8 870 1200 3105
468 A/3216-18 T520A686M004A(1)E180^ 27 8180 800 3105
468 T/3528-12 T520T686M004A(1)E070 27.2 870 1200 3105
468 B/3528-21 T520B686M004A(1)E025 27.2 825 2300 3105
468 B/3528-21 T520B686M004A(1)E035 27.2 835 1900 3105
468 B/3528-21 T520B686M004A(1)E040 27.2 840 1800 3105
468 B/3528-21 T520B686M004A(1)E070 27.2 870 1300 3105
468 B/3528-21 T525B686M004A(1)E080 27.2 880 1300 3125
468 U/6032-15 T520U686M004A(1)E055 27.2 855 1600 3105
4100 I/3216-10 T527I107M004ATE200^ 40 8200 775 3105
4100 A/3216-18 T520A107M004A(1)E150^ 40 8150 900 3105
4100 A/3216-18 T520A107M004A(1)E200^ 40 8200 700 3105
4100 T/3528-12 T520T107M004A(1)E070 40 870 1200 3105
4100 T/3528-12 T520T107M004A(1)E150 40 8150 800 3105
4100 B/3528-21 T520B107M004A(1)E025 40 825 2300 3105
4100 B/3528-21 T520B107M004A(1)E035 40 835 1900 3105
4100 B/3528-21 T520B107M004A(1)E040 40 840 1800 3105
4100 B/3528-21 T520B107M004A(1)E070 40 870 1300 3105
4100 B/3528-21 T525B107M004A(1)E080 40 880 1300 3125
4100 U/6032-15 T520U107M004A(1)E055 40 855 1600 3105
4150 B/3528-21 T520B157M004A(1)E015 60 815 2900 3105
4150 B/3528-21 T520B157M004A(1)E018 60 818 2700 3105
4150 B/3528-21 T520B157M004A(1)E025 60 825 2300 3105
4150 B/3528-21 T520B157M004A(1)E030 60 830 2100 3105
4150 B/3528-21 T520B157M004A(1)E035 60 835 1900 3105
4150 B/3528-21 T520B157M004A(1)E040 60 840 1800 3105
4150 B/3528-21 T520B157M004A(1)E070 60 870 1300 3105
4150 U/6032-15 T520U157M004A(1)E055 60 855 1600 3105
4150 C/6032-28 T520C157M004A(1)E015 60 815 3300 3105
4150 C/6032-28 T520C157M004A(1)E025 60 825 2600 3105
VDC at 105°C µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
Rated
Voltage Rated
Capacitance Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL Maximum
Operating Temp
13© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
13
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
Refer to Ordering Information for additional detail.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
Not all
parts are
105°C rated
µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
4150 C/6032-28 T520C157M004A(1)E045 60 845 1900 3105
4150 C/6032-28 T520C157M004A(1)E100 60 8100 1300 3105
4150 V/7343-19 T520V157M004A(1)E007 60 10 75200 3105
4150 V/7343-19 T520V157M004A(1)E009 60 10 94600 3105
4150 V/7343-19 T520V157M004A(1)E012 60 10 12 3900 3105
4150 V/7343-19 T520V157M004A(1)E015 60 10 15 3500 3105
4150 V/7343-19 T520V157M004A(1)E025 60 10 25 2700 3105
4150 D/7343-31 T520D157M004A(1)E007 60 10 75700 3105
4220 B/3528-21 T520B227M004A(1)E035 88 835 1900 3105
4220 B/3528-21 T520B227M004A(1)E045 88 845 1700 3105
4220 B/3528-21 T520B227M004A(1)E070 88 870 1300 3105
4220 C/6032-28 T520C227M004A(1)E015 88 815 3300 3105
4220 C/6032-28 T520C227M004A(1)E018 88 818 3000 3105
4220 C/6032-28 T520C227M004A(1)E025 88 825 2600 3105
4220 C/6032-28 T520C227M004A(1)E045 88 845 1900 3105
4220 C/6032-28 T520C227M004A(1)E055 88 855 1700 3105
4220 L/6032-19 T520L227M004A(1)E012 88 812 3500 3105
4220 L/6032-19 T520L227M004A(1)E025 88 825 2400 3105
4220 W/7343-15 T520W227M004A(1)E025 88 10 25 2700 3105
4220 W/7343-15 T520W227M004A(1)E040 88 10 40 2100 3105
4220 V/7343-19 T520V227M004A(1)E006 88 10 65600 3105
4220 V/7343-19 T520V227M004A(1)E007 88 10 75200 3105
4220 V/7343-19 T520V227M004A(1)E009 88 10 94600 3105
4220 V/7343-19 T520V227M004A(1)E012 88 10 12 3900 3105
4220 V/7343-19 T520V227M004A(1)E015 88 10 15 3500 3105
4220 V/7343-19 T520V227M004A(1)E018 88 10 18 3200 3105
4220 V/7343-19 T520V227M004A(1)E025 88 10 25 2700 3105
4220 V/7343-19 T520V227M004A(1)E040 88 10 40 2200 3105
4220 V/7343-19 T520V227M004A(1)E045 88 10 45 2000 3105
4220 D/7343-31 T520D227M004A(1)E006 88 10 66100 3105
4220 D/7343-31 T520D227M004A(1)E007 88 10 75700 3105
4220 D/7343-31 T520D227M004A(1)E012 88 10 12 4300 3105
4220 D/7343-31 T525D227M004A(1)E025 88 10 25 3000 3125
4220 D/7343-31 T520D227M004A(1)E065 88 10 65 1900 3105
4330 C/6032-28 T520C337M004A(1)E025 132 825 2600 3105
4330 C/6032-28 T520C337M004A(1)E045 132 845 1900 3105
4330 V/7343-19 T520V337M004A(1)E007 132 10 75200 3105
4330 V/7343-19 T520V337M004A(1)E009 132 10 94600 3105
4330 V/7343-19 T520V337M004A(1)E012 132 10 12 3900 3105
4330 V/7343-19 T520V337M004A(1)E018 132 1018 3200 3105
4330 V/7343-19 T520V337M004A(1)E025 132 10 25 2700 3105
4330 V/7343-19 T520V337M004A(1)E040 132 10 40 2200 3105
4330 D/7343-31 T530D337M004A(1)E005 132 8 5 7100 3125
VDC at 105°C µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
Rated
Voltage Rated
Capacitance Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL Maximum
Operating Temp
14© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
14
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
Refer to Ordering Information for additional detail.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
Not all
parts are
105°C rated
µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
4330 D/7343-31 T520D337M004A(1)E006 132 10 66100 3105
4330 D/7343-31 T530D337M004A(1)E006 132 8 6 6500 3125
4330 D/7343-31 T520D337M004A(1)E007 132 10 75700 3105
4330 D/7343-31 T520D337M004A(1)E009 132 10 95000 3105
4330 D/7343-31 T520D337M004A(1)E012 132 10 12 4300 3105
4330 D/7343-31 T520D337M004A(1)E015 132 10 15 3900 3105
4330 D/7343-31 T525D337M004A(1)E025 132 10 25 3000 3125
4330 D/7343-31 T520D337M004A(1)E040 132 10 40 2400 3105
4330 D/7343-31 T520D337M004A(1)E045 132 10 45 2200 3105
4470 D/7343-31 T530D477M004A(1)E006 188 8 6 6500 3125
4470 D/7343-31 T520D477M004A(1)E010 188 10 10 4700 3105
4470 D/7343-31 T530D477M004A(1)E010 188 810 5000 3125
4470 D/7343-31 T520D477M004A(1)E012 188 10 12 4300 3105
4470 D/7343-31 T520D477M004A(1)E015 188 10 15 3900 3105
4470 D/7343-31 T520D477M004A(1)E018 188 10 18 3500 3105
4470 D/7343-31 T520D477M004A(1)E025 188 10 25 3000 3105
4470 D/7343-31 T525D477M004A(1)E025 188 10 25 3000 3125
4470 D/7343-31 T520D477M004A(1)E040 188 10 40 2400 3105
4470 D/7343-31 T525D477M004A(1)E040 188 10 40 2400 3125
4470 Y/7343-40 T530Y477M004A(1)E005 188 8 5 7300 3125
4470 Y/7343-40 T530Y477M004A(1)E006 188 8 6 6600 3125
4680 D/7343-31 T520D687M004A(1)E012 272 10 12 4300 3105
4680 D/7343-31 T520D687M004A(1)E015 272 10 15 3900 3105
4680 D/7343-31 T520D687M004A(1)E025 272 10 25 3000 3105
4680 Y/7343-40 T530Y687M004A(1)E005 272 8 5 7300 3125
4680 Y/7343-40 T520Y687M004A(1)E010 272 10 10 4900 3105
4680 Y/7343-40 T520Y687M004A(1)E015 272 10 15 4000 3105
4680 Y/7343-40 T520Y687M004A(1)E025 272 10 25 3100 3105
4680 X/7343-43 T530X687M004A(1)E004 272 8 4 8200 3125
4680 X/7343-43 T530X687M004A(1)E005 272 8 5 7300 3125
4680 X/7343-43 T530X687M004A(1)E006 272 8 6 6700 3 125
4680 X/7343-43 T520X687M004A(1)E010 272 10 10 5000 3105
4680 X/7343-43 T530X687M004A(1)E010 272 810 5200 3125
4680 X/7343-43 T520X687M004A(1)E015 272 10 15 4100 3105
4680 X/7343-43 T520X687M004A(1)E035 272 10 35 2700 3105
41000 X/7343-43 T530X108M004A(1)E006 400 8 6 6700 3 125
6.3 15 T/3528-12 T520T156M006A(1)E100 9.45 8100 1000 3105
6.3 10 P/2012-10 T529P106M006AAE200^ 18.9 6200 354 3105
6.3 22 P/2012-10 T529P226M006AAE150^ 22 6150 408 3105
6.3 22 P/2012-10 T529P226M006AAE200^ 22 6200354 3105
6.3 22 A/3216-18 T520A226M006A(1)E090^ 13.86 890 1100 3105
6.3 22 A/3216-18 T520A226M006A(1)E100^ 13.86 8100 1100 3105
6.3 22 T/3528-12 T520T226M006A(1)E100 13.86 8100 1000 3105
VDC at 105°C µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
Rated
Voltage Rated
Capacitance Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL Maximum
Operating Temp
15© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
15
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
Refer to Ordering Information for additional detail.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
Not all
parts are
105°C rated
µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
6.3 33 A/3216-18 T520A336M006A(1)E070^ 20.79 870 1300 3105
6.3 33 A/3216-18 T520A336M006A(1)E080^ 20.79 880 1200 3105
6.3 33 A/3216-18 T520A336M006A(1)E120^ 20.79 8120 1000 3105
6.3 33 T/3528-12 T520T336M006A(1)E070 20.79 870 1200 3105
6.3 33 B/3528-21 T520B336M006A(1)E025 20.79 825 2300 3105
6.3 33 B/3528-21 T520B336M006A(1)E035 20.79 835 1900 3105
6.3 33 B/3528-21 T520B336M006A(1)E040 20.79 840 1800 3105
6.3 33 B/3528-21 T520B336M006A(1)E070 20.79 870 1300 3105
6.3 33 B/3528-21 T525B336M006A(1)E080 20.79 880 1300 3125
6.3 33 C/6032-28 T520C336M006A(1)E100 20.79 8100 1300 3105
6.3 47 P/2012-10 T529P476M006AAE200^ 29.61 6200 354 3105
6.3 47 P/2012-10 T529P476M006AAE150^ 29.6 6150 408 3105
6.3 47 I/3216-10 T527I476M006ATE200^ 29.6 6200 548 3105
6.3 47 A/3216-18 T520A476M006A(1)E150^ 29.61 8150 900 3105
6.3 47 T/3528-12 T520T476M006A(1)E040 29.61 840 1600 3105
6.3 47 T/3528-12 T520T476M006A(1)E070 29.61 870 1200 3105
6.3 47 T/3528-12 T525T476M006A(1)E080 29.61 880 1100 3125
6.3 47 B/3528-21 T520B476M006A(1)E025 29.61 825 2300 3105
6.3 47 B/3528-21 T520B476M006A(1)E035 29.61 835 1900 3105
6.3 47 B/3528-21 T520B476M006A(1)E040 29.61 840 1800 3105
6.3 47 B/3528-21 T520B476M006A(1)E070 29.61 870 1300 3105
6.3 47 B/3528-21 T525B476M006A(1)E070 29.61 870 1300 3125
6.3 47 B/3528-21 T525B476M006A(1)E080 29.61 880 1300 3125
6.3 68 A/3216-18 T520A686M006A(1)E150^ 42.84 8150 900 3105
6.3 68 T/3528-12 T520T686M006A(1)E070 42.84 870 1200 3105
6.3 68 T/3528-12 T520T686M006A(1)E150 42.84 8150 800 3105
6.3 68 B/3528-21 T520B686M006A(1)E025 42.84 825 2300 3105
6.3 68 B/3528-21 T520B686M006A(1)E035 42.84 835 1900 3105
6.3 68 B/3528-21 T520B686M006A(1)E040 42.84 840 1800 3105
6.3 68 B/3528-21 T520B686M006A(1)E070 42.84 870 1300 3105
6.3 68 B/3528-21 T525B686M006A(1)E080 42.84 880 1300 3125
6.3 68 U/6032-15 T520U686M006A(1)E055 42.84 855 1600 3105
6.3 68 U/6032-15 T520U686M006A(1)E070 42.84 870 1400 3105
6.3 68 C/6032-28 T520C686M006A(1)E100 42.84 8100 1300 3105
6.3 100 I/3216-10 T527I107M006ATE200^ 63.0 8200 775 3105
6.3 100 I/3216-10 T527I107M006ATE100^ 63.0 8100 775 3105
6.3 100 I/3216-10 T527I107M006ATE070^ 63.0 870 1134 3105
6.3 100 A/3216-18 T520A107M006ATE070^ 63 870 1035 3105
6.3 100 A/3216-18 T520A107M006ATE045^ 63 845 1600 3105
6.3 100 A/3216-18 T520A107M006ATE035^ 63 8351500 3105
6.3 100 A/3216-18 T520A107M006ATE025^ 63 825 1732 3105
6.3 100 T/3528-12 T520T107M006APE070 63 870 1200 3105
6.3 100 T/3528-12 T520T107M006APE055 63 855 1200 3105
VDC at 105°C µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
Rated
Voltage Rated
Capacitance Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL Maximum
Operating Temp
16© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
16
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
Refer to Ordering Information for additional detail.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
Not all
parts are
105°C rated
µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
6.3 100 B/3528-21 T520B107M006A(1)E015 63 815 2900 3105
6.3 100 B/3528-21 T520B107M006A(1)E018 63 818 2700 3105
6.3 100 B/3528-21 T520B107M006A(1)E025 63 825 2300 3105
6.3 100 B/3528-21 T520B107M006A(1)E035 63 835 1900 3105
6.3 100 B/3528-21 T520B107M006A(1)E040 63 840 1800 3105
6.3 100 B/3528-21 T520B107M006A(1)E045 63 845 1700 3105
6.3 100 B/3528-21 T520B107M006A(1)E070 63 870 1300 3105
6.3 100 U/6032-15 T520U107M006A(1)E055 63 855 1600 3105
6.3 100 W/7343-15 T520W107M006A(1)E040 63 10 40 2100 3105
6.3 100 V/7343-19 T520V107M006A(1)E009 63 10 94600 3105
6.3 100 V/7343-19 T520V107M006A(1)E012 63 10 12 3900 3105
6.3 100 V/7343-19 T520V107M006A(1)E015 63 10 15 3500 3105
6.3 100 V/7343-19 T520V107M006A(1)E045 63 10 45 2000 3105
6.3 100 C/6032-28 T520C107M006A(1)E025 63 825 2600 3105
6.3 100 C/6032-28 T520C107M006A(1)E045 63 845 1900 3105
6.3 120 B/3528-21 T520B127M006A(1)E035 75.6 835 1900 3105
6.3 150 I/3216-10 T529I157M006AAE200 283.5 10 200 548 3105
6.3 150 M/3528-15 T520M157M006A(1)E035 94.5 835 1900 3105
6.3 150 M/3528-15 T520M157M006A(1)E070 94.5 870 1300 3105
6.3 150 M/3528-15 T520M157M006A(1)E150 94.5 8150 900 3105
6.3 150 M/3528-15 T520M157M006A(1)E200 94.5 8200 800 3105
6.3 150 B/3528-21 T520B157M006A(1)E018 94.5 918 2700 3105
6.3 150 B/3528-21 T520B157M006A(1)E025 94.5 825 2300 3105
6.3 150 B/3528-21 T520B157M006A(1)E035 94.5 835 1900 3105
6.3 150 B/3528-21 T520B157M006A(1)E045 94.5 845 1700 3105
6.3 150 B/3528-21 T520B157M006A(1)E070 94.5 870 1300 3105
6.3 150 T/3528-12 T523T157M006APE030 94.5 830 1870 3105
6.3 150 T/3528-12 T520T157M006ATE035^ 94.5 835 1700 3105
6.3 150 C/6032-28 T520C157M006A(1)E015 94.5 815 3300 3105
6.3 150 C/6032-28 T520C157M006A(1)E025 94.5 825 2600 3105
6.3 150 C/6032-28 T520C157M006A(1)E045 94.5 845 1900 3105
6.3 150 C/6032-28 T520C157M006A(1)E055 94.5 855 1700 3105
6.3 150 U/6032-15 T520U157M006A(1)E045 94.5 845 1700 3105
6.3 150 U/6032-15 T520U157M006A(1)E055 94.5 855 1600 3105
6.3 150 L/6032-19 T520L157M006A(1)E012 94.5 812 3500 3105
6.3 150 L/6032-19 T520L157M006A(1)E025 94.5 825 2400 3105
6.3 150 W/7343-15 T520W157M006A(1)E025 94.5 10 25 2700 3105
6.3 150 W/7343-15 T520W157M006A(1)E040 94.5 10 40 2100 3105
6.3 150 V/7343-19 T520V157M006A(1)E006 94.5 10 65600 3105
6.3 150 V/7343-19 T520V157M006A(1)E007 94.5 1075200 3105
6.3 150 V/7343-19 T520V157M006A(1)E009 94.5 10 94600 3105
6.3 150 V/7343-19 T520V157M006A(1)E012 94.5 10 12 3900 3105
6.3 150 V/7343-19 T520V157M006A(1)E015 94.5 10 15 3500 3105
VDC at 105°C µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
Rated
Voltage Rated
Capacitance Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL Maximum
Operating Temp
17© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
17
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
Refer to Ordering Information for additional detail.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
Not all
parts are
105°C rated
µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
6.3 150 V/7343-19 T520V157M006A(1)E018 94.5 10 18 3200 3105
6.3 150 V/7343-19 T520V157M006A(1)E025 94.5 10 25 2700 3105
6.3 150 V/7343-19 T520V157M006A(1)E040 94.5 10 40 2200 3105
6.3 150 V/7343-19 T520V157M006A(1)E045 94.5 10 45 2000 3105
6.3 150 D/7343-31 T520D157M006A(1)E006 94.5 10 66100 3105
6.3 150 D/7343-31 T520D157M006A(1)E007 94.5 10 75700 3105
6.3 150 D/7343-31 T520D157M006A(1)E015 94.5 10 15 3900 3105
6.3 150 D/7343-31 T520D157M006A(1)E025 94.5 10 25 3000 3105
6.3 150 D/7343-31 T525D157M006A(1)E025 94.5 10 25 3000 3125
6.3 150 D/7343-31 T520D157M006A(1)E055 94.5 10 55 2000 3105
6.3 220 B/3528-21 T520B227M006A(1)E025 138.6 825 2300 3105
6.3 220 B/3528-21 T520B227M006A(1)E035 138.6 835 1900 3105
6.3 220 B/3528-21 T520B227M006A(1)E045 138.6 845 1700 3105
6.3 220 B/3528-21 T520B227M006A(1)E070 138.6 870 1300 3105
6.3 220 C/6032-28 T520C227M006A(1)E015 138.6 815 3300 3105
6.3 220 C/6032-28 T520C227M006A(1)E018 138.6 818 3000 3105
6.3 220 C/6032-28 T520C227M006A(1)E025 138.6 825 2600 3105
6.3 220 C/6032-28 T520C227M006A(1)E045 138.6 845 1900 3105
6.3 220 V/7343-19 T520V227M006A(1)E007 138.6 10 75200 3105
6.3 220 V/7343-19 T520V227M006A(1)E009 138.6 10 94600 3105
6.3 220 V/7343-19 T520V227M006A(1)E012 138.6 10 12 3900 3105
6.3 220 V/7343-19 T520V227M006A(1)E015 138.6 10 15 3500 3105
6.3 220 V/7343-19 T520V227M006A(1)E018 138.6 10 18 3200 3105
6.3 220 V/7343-19 T520V227M006A(1)E025 138.6 10 25 2700 3105
6.3 220 V/7343-19 T520V227M006A(1)E040 138.6 10 40 2200 3105
6.3 220 D/7343-31 T530D227M006A(1)E005 138.6 8 5 7100 3125
6.3 220 D/7343-31 T520D227M006A(1)E006 138.6 10 66100 3105
6.3 220 D/7343-31 T530D227M006A(1)E006 138.6 8 6 6500 3125
6.3 220 D/7343-31 T520D227M006A(1)E007 138.6 10 75700 3105
6.3 220 D/7343-31 T520D227M006A(1)E009 138.6 10 95000 3105
6.3 220 D/7343-31 T520D227M006A(1)E015 138.6 10 15 3900 3105
6.3 220 D/7343-31 T520D227M006A(1)E018 138.6 10 18 3500 3105
6.3 220 D/7343-31 T520D227M006A(1)E025 138.6 10 25 3000 3105
6.3 220 D/7343-31 T525D227M006A(1)E025 138.6 10 25 3000 3125
6.3 220 D/7343-31 T520D227M006A(1)E040 138.6 10 40 2400 3105
6.3 220 D/7343-31 T520D227M006A(1)E050 138.6 10 50 2100 3105
6.3 330 B/3528-21 T520B337M006A(1)E040 207.9 840 1800 385
6.3 330 B/3528-21 T520B337M006A(1)E070 208 870 1300 385
6.3 330 V/7343-19 T520V337M006A(1)E015 207.9 10 15 3500 3105
6.3 330 V/7343-19 T520V337M006A(1)E018 207.9 1018 3200 3105
6.3 330 V/7343-19 T520V337M006A(1)E025 207.9 10 25 2700 3105
6.3 330 V/7343-19 T520V337M006A(1)E040 207.9 10 40 2200 3105
6.3 330 V/7343-19 T520V337M006A(1)E045 207.9 10 45 2000 3105
VDC at 105°C µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
Rated
Voltage Rated
Capacitance Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL Maximum
Operating Temp
18© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
18
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
Refer to Ordering Information for additional detail.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
Not all
parts are
105°C rated
µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
6.3 330 D/7343-31 T530D337M006A(1)E006 207.9 8 6 6500 3125
6.3 330 D/7343-31 T520D337M006A(1)E009 207.9 10 95000 3105
6.3 330 D/7343-31 T520D337M006A(1)E010 207.9 10 10 4700 3105
6.3 330 D/7343-31 T530D337M006A(1)E010 207.9 810 5000 3125
6.3 330 D/7343-31 T520D337M006A(1)E015 207.9 10 15 3900 3105
6.3 330 D/7343-31 T520D337M006A(1)E018 207.9 10 18 3500 3105
6.3 330 D/7343-31 T520D337M006A(1)E025 207.9 10 25 3000 3105
6.3 330 D/7343-31 T525D337M006A(1)E025 207.9 10 25 3000 3125
6.3 330 D/7343-31 T520D337M006A(1)E040 207.9 10 40 2400 3105
6.3 330 D/7343-31 T525D337M006A(1)E040 207.9 10 40 2400 3125
6.3 330 D/7343-31 T520D337M006A(1)E045 207.9 10 45 2200 3105
6.3 330 Y/7343-40 T530Y337M006A(1)E005 207.9 8 5 7300 3125
6.3 330 Y/7343-40 T530Y337M006A(1)E006 207.9 8 6 6600 3125
6.3 330 Y/7343-40 T520Y337M006A(1)E010 207.9 10 10 4900 3105
6.3 330 Y/7343-40 T530Y337M006A(1)E010 207.9 810 5100 3125
6.3 330 Y/7343-40 T520Y337M006A(1)E015 207.9 10 15 4000 3105
6.3 330 Y/7343-40 T520Y337M006A(1)E025 207.9 10 25 3100 3105
6.3 330 Y/7343-40 T520Y337M006A(1)E040 207.9 10 40 2500 3105
6.3 470 W/7343-15 T520W477M006A(1)E055 296.1 10 55 1800 385
6.3 470 W/7343-15 T520W477M006A(1)E035 296.1 935 2300 385
6.3 470 V/7343-19 T520V477M006A(1)E055 296.1 10 55 1800 3105
6.3 470 V/7343-19 T520V477M006A(1)E035 296.1 10 35 2300 3105
6.3 470 Y/7343-40 T530Y477M006A(1)E005 296.1 8 5 7300 3125
6.3 470 Y/7343-40 T520Y477M006A(1)E010 296.1 10 10 4900 3105
6.3 470 Y/7343-40 T520Y477M006A(1)E015 296.1 10 15 4000 3105
6.3 470 Y/7343-40 T520Y477M006A(1)E018 296.1 10 18 3700 3105
6.3 470 Y/7343-40 T520Y477M006A(1)E025 296.1 10 25 3100 3105
6.3 470 Y/7343-40 T520Y477M006A(1)E035 296.1 10 35 2600 3105
6.3 470 Y/7343-40 T525Y477M006A(1)E035 296.1 10 35 2600 3125
6.3 470 D/7343-31 T520D477M006A(1)E015 296.1 10 15 3900 3105
6.3 470 D/7343-31 T520D477M006A(1)E025 296.1 10 25 3000 3105
6.3 470 D/7343-31 T520D477M006A(1)E030 296.1 10 30 2700 3105
6.3 470 X/7343-43 T530X477M006A(1)E004 296.1 8 4 8200 3125
6.3 470 X/7343-43 T530X477M006A(1)E005 296.1 8 5 7300 3125
6.3 470 X/7343-43 T530X477M006A(1)E006 296.1 8 6 6700 3 125
6.3 470 X/7343-43 T520X477M006A(1)E010 296.1 10 10 5000 3105
6.3 470 X/7343-43 T530X477M006A(1)E010 296.1 810 5200 3125
6.3 470 X/7343-43 T520X477M006A(1)E018 296.1 10 18 3700 3105
6.3 470 X/7343-43 T520X477M006A(1)E035 296.1 10 35 2700 3105
6.3 470 X/7343-43 T520X477M006A(1)E040 296.1 1040 2500 3105
6.3 680 Y/7343-40 T520Y687M006A(1)E018 428.4 10 18 3700 3105
6.3 680 Y/7343-40 T520Y687M006A(1)E025 428.4 10 25 3100 3105
6.3 680 X/7343-43 T530X687M006A(1)E010 428.4 810 5200 3125
VDC at 105°C µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
Rated
Voltage Rated
Capacitance Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL Maximum
Operating Temp
19© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
19
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
Refer to Ordering Information for additional detail.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
Not all
parts are
105°C rated
µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
6.3 680 X/7343-43 T530X687M006A(1)E018 428.4 818 3900 3125
6.3 680 X/7343-43 T520X687M006A(1)E025 428.4 10 25 3100 3105
6.3 680 X/7343-43 T520X687M006A(1)E018 428 10 18 3700 3105
6.3 680 J/7360-15 T523J687M006APE070 428 10 70 2510 385
6.3 1000 H/7360-20 T520H108M006A(1)E055 630 20 55 1800 385
6.3 1200 H/7360-20 T520H128M006A(1)E070 756 20 70 1200 385
6.3 1500 H/7360-20 T520H158M006A(1)E055 945 20 55 1800 385
822 T/3528-12 T520T226M008A(1)E070 17.6 870 1200 3105
833 T/3528-12 T520T336M008A(1)E070 26.4 870 1200 3105
833 T/3528-12 T520T336M008A(1)E080 26.4 880 1100 3105
833 T/3528-12 T525T336M008A(1)E080 26.4 880 1100 3125
833 B/3528-21 T520B336M008A(1)E025 26.4 825 2300 3105
833 B/3528-21 T520B336M008A(1)E035 26.4 835 1900 3105
833 B/3528-21 T520B336M008A(1)E040 26.4 840 1800 3105
833 B/3528-21 T520B336M008A(1)E070 26.4 870 1300 3105
833 U/6032-15 T520U336M008A(1)E070 26.4 870 1400 3105
847 B/3528-21 T520B476M008A(1)E035 37.6 835 1900 3105
847 B/3528-21 T520B476M008A(1)E070 37.6 870 1300 3105
882 C/6032-28 T520C826M008A(1)E025 65.6 825 2600 3105
882 C/6032-28 T520C826M008A(1)E045 65.6 845 1900 3105
8150 D/7343-31 T520D157M008A(1)E025 120 10 25 3000 3105
8150 D/7343-31 T520D157M008A(1)E040 120 10 40 2400 3105
8150 D/7343-31 T520D157M008A(1)E055 120 10 55 2000 3105
8150 V/7343-19 T520V157M008A(1)E040 120 10 40 2200 3105
10 10 P/2012-10 T529P106M010AAE200^ 30 6200 354 3105
10 10 A/3216-18 T520A106M010A(1)E080^ 10 880 1200 3105
10 10 A/3216-18 T525A106M010A(1)E080^ 10 880 1200 3125
10 15 A/3216-18 T520A156M010A(1)E080^ 15 880 1200 3105
10 22 P/2012-10 T529P226M010AAE150^ 66 6150 408 3105
10 22 P/2012-10 T529P226M010AAE200^ 66 6200 354 3105
10 22 I/3216-10 T527I226M010ATE200^ 22 8200 548 3105
10 22 A/3216-18 T520A226M010A(1)E080^ 22 880 1200 3105
10 22 B/3528-21 T525B226M010A(1)E080 22 880 1300 3125
10 33 I/3216-10 T527I336M010ATE200^ 33 6200 548 3105
10 33 T/3528-12 T520T336M010A(1)E040 33 840 1600 3105
10 33 T/3528-12 T520T336M010A(1)E070 33 870 1200 3105
10 33 T/3528-12 T520T336M010A(1)E080 33 880 1100 3105
10 33 T/3528-12 T525T336M010A(1)E080 33 880 1100 3125
10 33 B/3528-21 T520B336M010A(1)E025 33 825 2300 3105
10 33 B/3528-21 T520B336M010A(1)E035 33 8351900 3105
10 33 B/3528-21 T520B336M010A(1)E040 33 840 1800 3105
10 33 B/3528-21 T520B336M010A(1)E070 33 870 1300 3105
10 33 B/3528-21 T525B336M010A(1)E080 33 880 1300 3125
VDC at 105°C µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
Rated
Voltage Rated
Capacitance Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL Maximum
Operating Temp
20© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
20
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
Refer to Ordering Information for additional detail.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
Not all
parts are
105°C rated
µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
10 33 U/6032-15 T520U336M010A(1)E070 33 870 1400 3105
10 47 I/3216-10 T527I476M010ATE200^ 47 6200 548 3105
10 47 A/3216-18 T520A476M010ATE045^ 47 845 1291 3105
10 47 B/3528-21 T520B476M010A(1)E035 47 835 1900 3105
10 47 B/3528-21 T520B476M010A(1)E070 47 870 1300 3105
10 47 U/6032-15 T520U476M010A(1)E055 47 855 1600 3105
10 47 C/6032-28 T520C476M010A(1)E100 47 8100 1300 3105
10 68 U/6032-15 T520U686M010A(1)E055 68 855 1600 3105
10 68 W/7343-15 T520W686M010A(1)E025 68 10 25 2700 3105
10 68 W/7343-15 T520W686M010A(1)E040 68 10 40 2100 3105
10 68 C/6032-28 T520C686M010A(1)E045 68 845 1900 3105
10 68 V/7343-19 T520V686M010A(1)E025 68 10 25 2700 3105
10 68 V/7343-19 T520V686M010A(1)E040 68 10 40 2200 3105
10 68 V/7343-19 T520V686M010A(1)E045 68 10 45 2000 3105
10 68 V/7343-19 T520V686M010A(1)E060 68 10 60 1800 3105
10 68 V/7343-19 T520V686M010A(1)E100 68 10 100 1400 3105
10 68 D/7343-31 T520D686M010A(1)E100 68 10 100 1500 3105
10 100 B/3528-21 T520B107M010ATE070^ 100 870 1300 3105
10 100 C/6032-28 T520C107M010A(1)E025 100 825 2600 3105
10 100 C/6032-28 T520C107M010A(1)E045 100 845 1900 3105
10 100 L/6032-19 T520L107M010A(1)E025 100 825 2400 3105
10 100 W/7343-15 T520W107M010A(1)E040 100 10 40 2100 3105
10 100 V/7343-19 T520V107M010A(1)E018 100 10 18 3200 3105
10 100 V/7343-19 T520V107M010A(1)E025 100 10 25 2700 3105
10 100 V/7343-19 T520V107M010A(1)E045 100 10 45 2000 3105
10 100 V/7343-19 T520V107M010A(1)E050 100 10 50 1900 3105
10 100 V/7343-19 T520V107M010A(1)E055 100 10 55 1800 3105
10 100 D/7343-31 T520D107M010A(1)E018 100 10 18 3500 3105
10 100 D/7343-31 T525D107M010A(1)E025 100 10 25 3000 3125
10 100 D/7343-31 T520D107M010A(1)E055 100 10 55 2000 3105
10 100 D/7343-31 T525D107M010A(1)E055 100 10 55 2000 3125
10 100 D/7343-31 T520D107M010A(1)E080 100 10 80 1700 3105
10 150 C/6032-28 T520C157M010A(1)E055 150 855 1700 3105
10 150 V/7343-19 T520V157M010A(1)E018 150 10 18 3200 3105
10 150 V/7343-19 T520V157M010A(1)E025 150 10 25 2700 3105
10 150 V/7343-19 T520V157M010A(1)E040 150 10 40 2200 3105
10 150 D/7343-31 T530D157M010A(1)E005 150 8 5 7100 3125
10 150 D/7343-31 T530D157M010A(1)E006 150 8 6 6500 3125
10 150 D/7343-31 T530D157M010A(1)E010 150 810 5000 3125
10 150 D/7343-31 T520D157M010A(1)E015 150 1015 3900 3105
10 150 D/7343-31 T520D157M010A(1)E018 150 10 18 3500 3105
10 150 D/7343-31 T520D157M010A(1)E025 150 10 25 3000 3105
10 150 D/7343-31 T525D157M010A(1)E025 150 10 25 3000 3125
VDC at 105°C µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
Rated
Voltage Rated
Capacitance Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL Maximum
Operating Temp
21© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
21
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
Refer to Ordering Information for additional detail.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
Not all
parts are
105°C rated
µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
10 150 D/7343-31 T520D157M010A(1)E040 150 10 40 2400 3105
10 150 D/7343-31 T520D157M010A(1)E055 150 10 55 2000 3105
10 150 D/7343-31 T525D157M010A(1)E055 150 10 55 2000 3125
10 150 Y/7343-40 T520Y157M010A(1)E015 150 10 15 4000 3105
10 150 Y/7343-40 T520Y157M010A(1)E018 150 10 18 3700 3105
10 150 Y/7343-40 T520Y157M010A(1)E025 150 10 25 3100 3105
10 220 V/7343-19 T520V227M010A(1)E040 220 10 40 2200 3105
10 220 V/7343-19 T520V227M010A(1)E045 220 10 45 2000 3105
10 220 V/7343-19 T520V227M010A(1)E025 220 10 25 2700 3105
10 220 D/7343-31 T530D227M010A(1)E006 220 8 6 6500 3125
10 220 D/7343-31 T530D227M010A(1)E010 220 810 5000 3125
10 220 D/7343-31 T520D227M010A(1)E018 220 10 18 3500 3105
10 220 D/7343-31 T520D227M010A(1)E025 220 10 25 3000 3105
10 220 D/7343-31 T525D227M010A(1)E025 220 10 25 3000 3125
10 220 D/7343-31 T520D227M010A(1)E040 220 10 40 2400 3105
10 220 Y/7343-40 T530Y227M010A(1)E006 220 8 6 6600 3125
10 220 Y/7343-40 T520Y227M010A(1)E040 220 10 40 2500 3105
10 330 Y/7343-40 T520Y337M010A(1)E015 330 10 15 4000 3105
10 330 Y/7343-40 T520Y337M010A(1)E025 330 10 25 3100 3105
10 330 Y/7343-40 T520Y337M010A(1)E035 330 10 35 2600 3105
10 330 Y/7343-40 T525Y337M010A(1)E035 330 10 35 2600 3125
10 330 X/7343-43 T530X337M010A(1)E004 330 8 4 8200 3125
10 330 X/7343-43 T530X337M010A(1)E005 330 8 5 7300 3125
10 330 X/7343-43 T530X337M010A(1)E006 330 8 6 6700 3 125
10 330 X/7343-43 T520X337M010A(1)E010 330 10 10 5000 3105
10 330 X/7343-43 T530X337M010A(1)E010 330 810 5200 3125
10 330 X/7343-43 T520X337M010A(1)E025 330 10 25 3100 3105
10 330 X/7343-43 T520X337M010A(1)E035 330 10 35 2700 3105
10 330 J/7360-15 T523J337M010APE070 330 10 70 2510 385
10 470 J/7360-15 T523J477M010APE070 470 10 70 2510 385
10 820 H/7360-20 T520H827M010A(1)E070 820 20 70 1200 385
10 330 X/7343-43 T520X337M010A(1)E040 330 10 40 2500 3105
11 47 Q/7343-12 T520Q476M011A(1)E040 52 10 40 4500 3105
12.5 10 T/3528-12 T520T106M12RA(1)E150 12.5 8150 800 3105
12.5 15 T/3528-12 T520T156M12RA(1)E080 18.75 880 1100 3105
12.5 47 T/3528-12 T521T476M12RA(1)E090 58.8 890 1100 3105
16 10 B/3528-21 T520B106M016A(1)E100 16 8100 1100 3105
16 10 B/3528-21 T521B106M016A(1)E100 16 8100 1100 3125
16 15 B/3528-21 T521B156M016A(1)E090 24 890 1200 3105
16 22 B/3528-21 T521B226M016A(1)E090 35.2 8901200 3105
16 22 C/6032-28 T520C226M016A(1)E080 35.2 880 1400 3105
16 33 T/3528-12 T521T336M016A(1)E045 52.8 845 1500 3105
16 33 T/3528-12 T521T336M016A(1)E050 52.8 10 50 1400 3105
VDC at 105°C µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
Rated
Voltage Rated
Capacitance Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL Maximum
Operating Temp
22© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
22
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
Refer to Ordering Information for additional detail.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
Not all
parts are
105°C rated
µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
16 33 B/3528-21 T521B336M016A(1)E070 52.8 870 1300 3105
16 33 B/3528-21 T521B336M016A(1)E090 52.8 890 1200 3105
16 33 B/3528-21 T525B336M016A(1)E070 52.8 870 1300 3125
16 33 B/3528-21 T525B336M016A(1)E090 52.8 890 1200 3125
16 33 Q/7343-12 T521Q336M016A(1)E040 52.8 10 40 2500 3105
16 33 W/7343-15 T520W336M016A(1)E045 52.8 10 45 2000 3105
16 33 V/7343-19 T520V336M016A(1)E045 52.8 10 45 2000 3105
16 33 V/7343-19 T520V336M016A(1)E060 52.8 10 60 1800 3105
16 33 V/7343-19 T520V336M016A(1)E070 52.8 10 70 1600 3105
16 47 W/7343-15 T521W476M016A(1)E040 75.2 10 40 2100 3105
16 47 W/7343-15 T520W476M016A(1)E045 75.2 10 45 2000 3105
16 47 W/7343-15 T521W476M016A(1)E045 75.2 10 45 2000 3105
16 47 V/7343-19 T521V476M016A(1)E040 75.2 10 40 2200 3105
16 47 V/7343-19 T520V476M016A(1)E045 75.2 10 45 2000 3105
16 47 V/7343-19 T521V476M016A(1)E055 75.2 10 55 1800 3105
16 47 V/7343-19 T520V476M016A(1)E070 75.2 10 70 1600 3105
16 47 V/7343-19 T521V476M016A(1)E070 75.2 10 70 1600 3105
16 47 V/7343-19 T521V476M016A(1)E080 75.2 10 80 1500 3105
16 47 D/7343-31 T520D476M016A(1)E035 75.2 10 35 2500 3105
16 47 D/7343-31 T525D476M016A(1)E035 75.2 10 35 2500 3125
16 47 D/7343-31 T521D476M016A(1)E040 75.2 10 40 2400 3105
16 47 D/7343-31 T521D476M016A(1)E045 75.2 10 45 2200 3105
16 47 D/7343-31 T521D476M016A(1)E055 75.2 10 55 2000 3105
16 47 D/7343-31 T525D476M016A(1)E065 75.2 10 65 1900 3125
16 47 D/7343-31 T520D476M016A(1)E070 75.2 10 70 1800 3105
16 47 D/7343-31 T521D476M016A(1)E070 75.2 10 70 1800 3105
16 47 D/7343-31 T521D476M016A(1)E090 75.2 10 90 1600 3105
16 68 W/7343-15 T523W686(2)016APE050 108.8 10 50 2820 3105
16 68 W/7343-15 T523W686(2)016APE070 108.8 10 70 2376 3 105
16 68 W/7343-15 T523W686(2)016APE100 108.8 10 100 1988 3105
16 68 V/7343-19 T521V686M016A(1)E040 108.8 10 40 2200 3105
16 68 V/7343-19 T521V686M016A(1)E050 108.8 10 50 1900 3105
16 68 V/7343-19 T521V686M016A(1)E090 108.8 10 90 1400 3105
16 68 D/7343-31 T520D686M016A(1)E050 108.8 10 50 2100 3105
16 100 W/7343-15 T523W107(2)016APE050 160 10 50 2820 3105
16 100 W/7343-15 T523W107(2)016APE070 160 10 70 2376 3 105
16 100 W/7343-15 T523W107(2)016APE100 160 10 100 1988 3105
16 100 V/7343-19 T521V107M016A(1)E040 160 10 40 2200 3125
16 100 V/7343-19 T521V107M016A(1)E050 160 10 50 1900 3125
16 100 D/7343-31 T521D107M016A(1)E050 160 1050 2100 3105
16 150 W/7343-15 T523W157(2)016APE050 240 10 50 2820 3105
16 150 W/7343-15 T523W157(2)016APE070 240 10 70 2376 3 105
16 150 W/7343-15 T523W157(2)016APE100 240 10 100 1988 3105
VDC at 105°C µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
Rated
Voltage Rated
Capacitance Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL Maximum
Operating Temp
23© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
23
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
Not all
parts are
105°C rated
µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
16 150 D/7343-31 T521D157M016A(1)E050 240 10 50 2100 3105
16 150 D/7343-31 T521D157M016A(1)E040 240 10 40 2400 3105
16 150 X/7343-43 T530X157M016A(1)E015 240 815 4200 3125
16 150 X/7343-43 T530X157M016A(1)E025 240 825 3300 3125
16 150 X/7343-43 T520X157M016A(1)E040 240 10 40 2500 3105
16 150 X/7343-43 T530X157M016A(1)E040 240 840 2600 3125
16 150 X/7343-43 T521X157M016A(1)E080 240 10 80 1800 3105
16 220 X/7343-43 T521X227M016A(1)E035 352 10 35 2700 3125
16 220 X/7343-43 T521X227M016A(1)E050 352 10 50 2200 3125
16 220 H/7360-20 T523H227M016APE070 352 10 70 2510 385
16 220 J/7360-15 T523J227M016APE070 352 10 70 2510 385
16 330 X/7343-43 T521X337M016A(1)E025 528 10 25 3100 3125
16 330 X/7343-43 T521X337M016A(1)E050 528 10 50 2200 3125
16 330 H/7360-20 T523H337M016APE070 528 10 70 2510 385
16 470 O/7360-43 T521O477M016ATE020 752 10 20 3870 3105
20 10 B/3528-21 T521B106M020A(1)E100 20 8100 1100 3125
20 15 B/3528-21 T521B156M020A(1)E090 30 10 90 1200 3105
20 22 B/3528-21 T521B226M020A(1)E090 44 890 1200 3105
20 22 V/7343-19 T520V226M020A(1)E040 44 10 40 2200 3105
20 22 V/7343-19 T520V226M020A(1)E045 44 10 45 2000 3105
20 22 V/7343-19 T520V226M020A(1)E090 44 10 90 1400 3105
20 22 V/7343-19 T521V226M020A(1)E090 44 10 90 1400 3125
20 33 B/3528-21 T521B336M020ATE090^ 132 10 90 972 3105
20 47 W/7343-15 T521W476M020A(1)E040 94 940 2100 3105
20 47 W/7343-15 T521W476M020A(1)E045 94 945 2000 3105
20 47 V/7343-19 T521V476M020A(1)E090 94 10 90 1400 3125
20 47 V/7343-19 T521V476M020A(1)E080 94 10 80 1500 3125
20 47 V/7343-19 T521V476M020A(1)E055 94 10 55 1800 3125
20 47 D/7343-31 T521D476M020A(1)E055 94 10 55 2000 3125
20 47 D/7343-31 T521D476M020A(1)E040 94 10 40 2400 3125
20 68 V/7343-19 T521V686M020A(1)E050 136 10 50 1900 3105
20 100 V/7343-19 T521V107M020A(1)E055 200 10 55 1800 3125
20 100 D/7343-31 T521D107M020A(1)E055 200 10 55 2000 3105
20 150 D/7343-31 T521D157M020A(1)E065 300 10 65 1900 3105
20 150 D/7343-31 T521D157M020A(1)E050 300 10 50 2100 3105
25 4.7 P/2012-10 T529P475M025AAE300^ 35.3 10 300 289 3105
25 10 M/3528-15 T521M106M025ATE100^ 50 10 100 922 3105
25 10 B/3528-21 T521B106M025A(1)E100 25 8100 1100 3125
25 10 T/3528-12 T521T106M025A(1)E100 25 8100 1000 3125
25 10 T/3528-12 T521T106M025A(1)E060 25 8601300 3125
25 15 B/3528-21 T521B156M025A(1)E100 37.5 8100 1100 3105
25 15 V/7343-19 T520V156M025A(1)E090 37.5 10 90 1400 3105
25 15 V/7343-19 T521V156M025A(1)E090 37.5 10 90 1400 3105
VDC at 105°C µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
Rated
Voltage Rated
Capacitance Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL Maximum
Operating Temp
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
Refer to Ordering Information for additional detail.
24© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
24
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
Refer to Ordering Information for additional detail.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
Not all
parts are
105°C rated
µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
25 15 V/7343-19 T521V156M025A(1)E040 37.5 10 40 2200 3105
25 15 D/7343-31 T520D156M025A(1)E060 37.5 10 60 1900 3105
25 15 D/7343-31 T520D156M025A(1)E080 37.5 10 80 1700 3105
25 22 B/3528-21 T521B226M025A(1)E100 55 8100 1100 3105
25 22 W/7343-15 T521W226M025A(1)E040 55 10 40 2100 3105
25 22 W/7343-15 T521W226M025A(1)E070 55 10 70 1400 3105
25 22 V/7343-19 T521V226M025A(1)E040 55 10 40 2200 3105
25 22 V/7343-19 T521V226M025A(1)E045 55 10 45 2000 3105
25 22 V/7343-19 T521V226M025A(1)E060 55 10 60 1800 3105
25 22 V/7343-19 T521V226M025A(1)E090 55 10 90 1400 3105
25 33 V/7343-19 T521V336M025A(1)E025 82.5 10 25 2700 3105
25 33 V/7343-19 T521V336M025A(1)E060 82.5 10 60 1800 3105
25 33 V/7343-19 T521V336M025A(1)E040 82.5 10 40 2200 3105
25 33 D/7343-31 T521D336M025A(1)E040 82.5 10 40 2400 3105
25 33 D/7343-31 T521D336M025A(1)E060 82.5 10 60 1900 3105
25 47 D/7343-31 T521D476M025A(1)E065 117.5 10 65 1900 3105
25 68 D/7343-31 T521D686M025A(1)E070 170 10 70 1800 3105
25 100 D/7343-31 T521D107M025A(1)E040 250 10 40 2400 3105
25 100 D/7343-31 T521D107M025A(1)E060 250 10 60 1900 3105
25 100 X/7343-43 T521X107M025A(1)E030 250 10 30 2900 3105
25 100 X/7343-43 T521X107M025A(1)E060 250 10 60 2000 3105
35 3.3 B/3528-21 T521B335M035A(1)E150 11.6 8150 900 3105
35 3.3 B/3528-21 T521B335M035A(1)E200 11.6 8200 800 3105
35 4.7 B/3528-21 T521B475M035A(1)E150 16.5 8150 900 3105
35 4.7 B/3528-21 T521B475M035A(1)E200 16.5 8200 800 3105
35 6.8 T/3528-12 T521T685M035APE090 23.8 10 90 1100 3125
35 6.8 B/3528-21 T521B685M035A(1)E150 23.8 8150 900 3105
35 6.8 B/3528-21 T521B685M035A(1)E200 23.8 8200 800 3105
35 10 B/3528-21 T521B106M035A(1)E150 35 8150 900 3105
35 10 B/3528-21 T521B106M035A(1)E200 35 8200 800 3105
35 10 V/7343-19 T521V106M035A(1)E120 35 10 120 1200 3125
35 15 V/7343-19 T521V156M035A(1)E100 52.5 10 100 1400 3125
35 15 V/7343-19 T521V156M035A(1)E125 52.5 10 125 1200 3125
35 22 D/7343-31 T521D226M035A(1)E040 77 10 40 2400 3125
35 22 D/7343-31 T521D226M035A(1)E060 77 10 60 1900 3125
35 33 D/7343-31 T521D336M035A(1)E065 115.5 10 65 1900 3125
35 47 X/7343-43 T521X476M035A(1)E030 164.5 10 30 2900 3125
35 47 X/7343-43 T521X476M035A(1)E070 164.5 10 70 1900 3125
35 47 W/7343-15 T523W476(2)035APE090 164.5 10 90 2100 385
35 47 W/7343-15 T523W476(2)035APE100 164.5 10 100 1988 385
50 0.68 B/3528-21 T521B684M050A(1)E200 3.4 8200 800 3105
50 1B/3528-21 T521B105M050A(1)E200 5 8 200 800 3105
50 1.5 B/3528-21 T521B155M050A(1)E200 7.5 8200 800 3105
VDC at 105°C µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
Rated
Voltage Rated
Capacitance Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL Maximum
Operating Temp
25© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
25
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
Refer to Ordering Information for additional detail.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
Not all
parts are
105°C rated
µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
50 2.2 B/3528-21 T521B225M050A(1)E200 11 8200 800 3105
50 3.3 B/3528-21 T521B335M050A(1)E200 16.5 8200 800 3105
50 5.6 D/7343-31 T521D565M050A(1)E070 28 10 70 1800 3125
50 5.6 D/7343-31 T521D565M050A(1)E090 28 10 90 1600 3125
50 5.6 V/7343-19 T521V565M050A(1)E070 28 10 70 1800 3125
50 5.6 V/7343-19 T521V565M050A(1)E090 28 10 90 1600 3125
50 6.8 D/7343-31 T521D685M050A(1)E070 34 10 70 1800 3125
50 6.8 D/7343-31 T521D685M050A(1)E090 34 10 90 1600 3125
50 6.8 V/7343-19 T521V685M050A(1)E070 34 10 70 1800 3125
50 6.8 V/7343-19 T521V685M050A(1)E090 34 10 90 1600 3125
50 10 D/7343-31 T521D106M050A(1)E090 50 10 90 1600 3125
50 10 D/7343-31 T521D106M050A(1)E120 50 10 120 1369 3125
50 10 V/7343-19 T521V106M050A(1)E090 50 10 90 1600 3125
50 18 D/7343-31 T521D186M050A(1)E090 90 10 90 1600 3125
50 18 X/7343-43 T521X186M050A(1)E070 90 10 70 1900 3125
50 18 X/7343-43 T521X186M050A(1)E050 90 10 50 2200 3125
50 18 X/7343-43 T521X186M050A(1)E035 90 10 35 2700 3125
50 22 D/7343-31 T521D226M050A(1)E090 110 10 90 1600 3125
50 22 X/7343-43 T521X226M050A(1)E075 110 10 75 1815 3125
50 22 X/7343-43 T521X226M050A(1)E050 110 10 50 2200 3125
50 33 X/7343-43 T521X336M050A(1)E075 165 10 75 1815 3125
50 33 X/7343-43 T521X336M050A(1)E050 165 10 50 2200 3125
63 0.68 B/3528-21 T521B684M063A(1)E200 4.3 8200 800 3105
63 1B/3528-21 T521B105M063A(1)E200 6.3 8200 800 3105
63 1.5 B/3528-21 T521B155M063A(1)E200 9.5 8200 800 3105
63 4.7 C/6032-28 T521C475M063A(1)E200 29.6 6200 900 3105
63 4.7 D/7343-31 T521D475M063A(1)E300 29.61 10 300 900 3125
63 4.7 D/7343-31 T521D475M063A(1)E075 29.6 10 75 1700 3125
63 6.8 X/7343-43 T521D685M063A(1)E075 42.8 10 75 1700 3125
63 10 X/7343-43 T521X106M063A(1)E050 63 10 50 2200 3125
63 15 X/7343-43 T521X156M063A(1)E035 94.5 10 35 2600 3125
63 15 X/7343-43 T521X156M063A(1)E150 94.5 10 150 1300 3125
63 22 X/7343-43 T521X226M063A(1)E075 138.6 10 75 1815 3125
75 4.7 D/7343-31 T521D475M075A(1)E075 35.3 10 75 1700 3125
75 10 X/7343-43 T521X106M075A(1)E050 75 10 50 2200 3125
75 15 X/7343-43 T521X156M075A(1)E035 112.5 10 35 2600 3125
VDC at 105°C µF KEMET/EIA (See below for
part options)
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
mA at +45°C
100 kHz Reow Temp
≤ 260°C °C
Rated
Voltage Rated
Capacitance Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR
Maximum
Allowable
Ripple
Current
MSL Maximum
Operating Temp
26© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
26
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Derating Guidelines
50%
55%
60%
65%
70%
75%
80%
85%
90%
95%
−55 25 85 105 125
% Rated Voltage
Temperature ºC
Recommended Application Voltage
60%
Recommended Application Voltage
KO-CAPs are solid state capacitors that demonstrate no wearout mechanism when operated within their recommended
guidelines.While the KO-CAP can be operated at full rated voltage, most circuit designers seek a minimum level of
assurance in long term reliability, which should be demonstrated with data. A voltage derating can provide the desired level
of demonstrated reliability based on industry accepted acceleration models.Since most applications do require long term
reliability, KEMET recommends that designers consider a voltage derating, according to the graphic above, for the maximum
steady state voltage.
Voltage
Rating
Maximum Recommended
Steady State Voltage
−55°C to 105°C 105°C to 125°C
75 V ≤ VR90% of VR60% of VR
VR = Rated Voltage
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation
capabilities of the device. Permissible AC ripple voltage, which may be applied is limited by two criteria:
a. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor.
b. The negative peak AC voltage, in combination with bias voltage, if any, must not exceed the allowable limits specied for
reverse voltage.
The maximum power dissipation must be reduced with increasing environmental operating temperatures. Refer to the table
below for temperature compensation requirements.
Temperature Compensation Multipliers
for Maximum Ripple Current
T ≤ 45°C
45° C < T ≤ 85°C
85°C < T ≤ 125°C
1.00
0.70
0.25
T= Environmental Temperature
27© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
27
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Surge Voltage
Surge voltage is the maximum voltage (peak value) which may be applied to the capacitor. The surge voltage must not be
applied for periodic charging and discharging in course of normal operation and cannot be part of the application voltage.
Surge voltage capability is demonstrated by application of 1,000 cycles at operating temperature. The parts are charged
through a 33 Ohm resistor for 30 seconds and then discharged though a 33 Ohm resistor for each cycle.
Rated Voltage (V) Surge Voltage (V) Derated Voltage (V) Derated Surge Voltage (V)
–55ºC to 105ºC
up to 125ºC
2.5
3.3
1.7
2.2
6.3
8.2
4.2
5.5
10
13.0
6.7
8.7
16
20.8
10.7
13.9
20
26.0
13.4
17.4
25
32.5
16.8
21.8
35
45.5
23.5
30.5
50
65.0
33.5
43.6
Reverse Voltage
Polymer electrolytic capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong
polarity. These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below
table.
Temperature Permissible Transient Reverse Voltage
25°C
15% of Rated Voltage
55°C
10% of Rated Voltage
85°C
5% of Rated Voltage
105°C
3% of Rated Voltage
125°C*
1% of Rated Voltage
*For series rated to 125°C
28© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
28
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Table 2 – Land Dimensions/Courtyard
T520/T521/T523/T525/T530
KEMET
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
Case EIA W L S V1 V2 W L S V1 V2 W L S V1 V2
A3216–18 1.35 2.20 0.62 6.02 2.80 1.23 1.80 0.82 4.92 2.30 1.13 1.42 0.98 4.06 2.04
B3528–21 2.35 2.21 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24
C6032–28 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74
D7343–31 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84
H7360-20 4.25 2.77 3.67 10.22 7.30 4.13 2.37 3.87 9.12 6.80 4.03 1.99 4.03 8.26 6.54
J7360-15 4.60 3.07 3.07 10.22 7.30 4.48 2.67 3.27 9.12 6.80 4.38 2.29 3.43 8.26 6.54
L6032-19 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74
M3528-15 2.35 2.20 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24
Q7343-12 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84
T3528–12 2.35 2.20 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24
U6032–15 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74
V7343–21 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84
W7343–15 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84
X17343–43 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84
Y17343–40 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reow
solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reow solder processes.
Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform
qualication testing based on the conditions outlined in IPC standard 7351 (IPC–7351).
¹ Height of these chips may create problems in wave soldering.
2 Land pattern geometry is too small for silkscreen outline.
L
S
W W
L
V1
V2
Grid Placement Courtyard
29© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
29
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Table 2 – Land Dimensions/Courtyard cont'd
T527
KEMET
Metric
Size Code
Dimensions (mm)
Minimum – Maximum
Case
EIA
G
Z
X
Y
I3216–10 1.00 – 1.65 3.25 – 3.80 1.1 – 1.30 0.8 – 1.40
(JEITA RC-2371 is recommended for reference)
X
Y
X
Y
Z
G
T529
KEMET
Metric
Size Code
Dimensions (mm)
Minimum – Maximum
Case
EIA
G
Z
X
Y
I3216–10 1.00 – 1.65 3.25 – 3.80 1.1 – 1.30 0.8 – 1.40
P2012–10 0.40 – 1.05 2.05 – 2.60 0.80 – 1.00 0.5 – 1.1
(JEITA RC-2371 is recommended for reference)
X
Y
X
Y
Z
G
30© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
30
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Soldering Process
The KEMET families of surface mount capacitors are
compatible with wave (single or dual), convection, IR,
or vapor phase reow techniques. Preheating of these
components is recommended to avoid extreme thermal
stress. KEMET's recommended prole conditions for
convection and IR reow reect the prole conditions of the
IPC/J–STD–020D standard for moisture sensitivity testing.
The devices can safely withstand a maximum of three reow
passes at these conditions.
Please note that although the X/7343–43 case size can
withstand wave soldering, the tall prole (4.3 mm maximum)
dictates care in wave process development.
Hand soldering should be performed with care due to the
diculty in process control. If performed, care should be
taken to avoid contact of the soldering iron to the molded
case. The iron should be used to heat the solder pad,
applying solder between the pad and the termination, until
reow occurs. Once reow occurs, the iron should be
removed immediately. “Wiping” the edges of a chip and
heating the top surface is not recommended.
Prole Feature SnPb Assembly
Pb-Free Assembly
Preheat/Soak
Temperature Minimum (T
Smin
)100°C 150°C
Temperature Maximum (T
Smax
)150°C 200°C
Time (t
s
) from T
smin
to T
smax
) 60 – 120 seconds 60 – 120 seconds
Ramp-up Rate (T
L
to T
P
)3°C/seconds maximum 3°C/seconds maximum
Liquidous Temperature (T
L
)183°C 217°C
Time Above Liquidous (t
L
) 60 – 150 seconds 60 – 150 seconds
Peak Temperature (TP)
220°C*
235°C**
250°C*
260°C**
Time within 5°C of Maximum
Peak Temperature (tP)
20 seconds maximum 30 seconds maximum
Ramp-down Rate (T
P
to T
L
)6°C/seconds maximum 6°C/seconds maximum
Time 25°C to Peak
Temperature
6 minutes maximum 8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reow.
* For Case Size height > 2.5 mm
** For Case Size height ≤ 2.5 mm
Storage
All KO-CAP Series are shipped in moisture barrier bags (MBBs) with desiccant and humidity indicator card (HIC). These
parts are classied as MSL3 (Moisture Sensitivity Level 3) per IPC/JEDEC J–STD–020 and packaged per IPC/JEDEC
J–STD–033. MSL3 species a oor time of 168H at 30°C maximum temperature and 60% relative humidity. Unused
capacitors should be sealed in a MBB with fresh desiccant.
The calculated shelf life in a sealed bag would be 12 months from a bag seal date in a storage environment of < 40°C and
humidity < 90% RH. It should be 24 months from a bag seal date in a storage environment of < 30°C and humidity < 70% RH.
If baking is required, refer to IPC/JEDEC J–STD–033 for bake procedure.
Time
Temperature
Tsmin
25
Tsmax
TL
TPMaximum Ramp-up Rate = 3°C/second
Maximum Ramp-down Rate = 6°C/second
tP
tL
ts
25°C to Peak
31© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
31
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Construction
T520/T521/T525/T530
Leadframe
(− Cathode)
Leadframe
(+ Anode)
Wire
Molded Epoxy
Case
Molded Epoxy
Case
Weld
(to attach wire)
Silver Adhesive
Polarity Stripe (+)
Polarity
Bevel (+)
Detailed Cross Section
Wire
Tantalum
Ta2O5 Dielectric
(First Layer)
Carbon
(Third Layer)
Silver Paint
(Fourth Layer)
Polymer
(Second Layer)
T523
Leadframe
(- Cathode)
Leadframe
(+ Anode)
Tantalum Wire
Weld
(to attach wire)
Detailed Cross Section
Tantalum
Wire
Tantalum
Polymer
(Second Layer)
Carbon
(Third Layer) Silver Paint
(Fourth Layer)
Polarity Stripe (+)
Molded Epoxy
Case
Ta2O5 Dielectric
(First Layer)
Spacer
32© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
32
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Construction cont'd
T527
Leadframe
(− Cathode)
Leadframe
(+ Anode)
Wire
Weld
(to attach wire)
Detailed Cross Section
Wire
Tantalum
Polymer
(Second Layer)
Carbon
(Third Layer) Silver Paint
(Fourth Layer)
Polarity Stripe (+)
Molded Epoxy
Case
Ta2O5 Dielectric
(First Layer)
Spacer
Silver
Adhesive
T529
(− Cathode)
(+ Anode)
Wire
Weld
(to attach wire)
Detailed Cross Section
Wire
Tantalum
Polymer
(Second Layer)
Carbon
(Third Layer) Silver Paint
(Fourth Layer)
Polarity Stripe (+)
Molded Epoxy
Case
Ta2O5 Dielectric
(First Layer)
Spacer
Silver AdhesiveSubstrate
33© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
33
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Capacitor Marking
T520/T521/T523/T525/T530
(KO)
KEMET
Organic
Polymer
Polarity
Indicator (+)
Rated
Voltage
Picofarad
Code
KEMET
ID
Date
Code*
* 908 = 8th week of 2019
T520A/T527
Polarity
Indicator (+)
Date
Code
Voltage and
Capacitance
Code
Date Code*
Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
2016 n p q r s t u v w x y z
2017 A B C D E F G H J K L M
2018 N P Q R S T U V W X Y Z
2019 a b c d e f g h j k l m
Date Code*
1st digit = Last number of Year 5 = 2015
6 = 2016
7 = 2017
8 = 2018
9 = 2019
2nd and 3rd digit = Week of the
Year
01 = 1st week of the Year to
52 = 52nd week of the Year
Code egJ A D E
Rated Voltage 2.5 V 4 V 6.3 V 10 V 20 V 25 V
Code N7 S7 w A8
Capacitance 33 47 68 100
Code S A E7 J7
Capacitance 4.7 10 15 22
Code E8 J8 N8 S8
Capacitance 150 220 330 470
34© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
34
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Capacitor Marking cont'd
T520B/T521B/T520T
Polarity
Indicator (+)
Voltage and
Capacitance
Code
Date Code
ID Code
T529
Polarity
Indicator (+)
Date
Code
Voltage and
Capacitance
Code
Date Code*
Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
2016 n p q r s t u v w x y z
2017 A B C D E F G H J K L M
2018 N P Q R S T U V W X Y Z
2019 a b c d e f g h j k l m
Code egJ A D E
Rated Voltage 2.5 V 4 V 6.3 V 10 V 20 V 25 V
Code N7 S7 w A8
Capacitance 33 47 68 100
Code S A E7 J7
Capacitance 4.7 10 15 22
Code E8 J8 N8 S8
Capacitance 150 220 330 470
35© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
35
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Tape & Reel Packaging Information
KEMET’s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with
EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system
is compatible with all tape-fed automatic pick-and-place systems.
Embossment
8 mm (0.315”) or
12 mm (0.472”)
Embossed carrier
Right hand
orientation
only
(+) (−)
Top tape thickness
0.10 mm (0.004”)
maximum thickness
180 mm (7.0”) or
330 mm (13.”)
Table 3 – Packaging Quantity
Case Code
Tape Width
(mm) 7" Reel* 13" Reel*
KEMET
EIA
P
2012-10
8
3,000
N/A
R
2012-12
8
2,500
10,000
I
3216-10
8
3,000
N/A
S
3216-12
8
2,500
10,000
A
3216-18
8
2,000
N/A
T
3528-12
8
3,000
10,000
M
3528-15
8
2,500
8,000
B
3528-21
8
2,000
8,000
U
6032-15
12
1,000
5,000
L
6032-19
12
1,000
3,000
C
6032-28
12
500
3,000
Q
7343-12
12
1,000
3,000
W
7343-15
12
1,000
3,000
Z
7343-17
12
1,000
3,000
V
7343-19
12
1,000
3,000
D
7343-31
12
500
2,500
Y
7343-40
12
500
2,000
X
7343-43
12
500
2,000
J
7360-15
12
1,000
3,000
H
7360-20
12
1,000
3,000
O
7360-43
12
250
1,000
* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
36© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
36
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
P
0
T
F
W
Center Lines of Cavity
A
0
B
0
User Direction of Unreeling
Cover Tape
K
0
B
1
is for tape feeder reference only,
including draft concentric about B
0
.
T
2
ØD
1
ØD
0
B
1
S
1
T
1
E
1
E
2
P
1
P
2
Embossment
For cavity size,
see Note 1, Table 4
(10 pitches cumulative
tolerance on tape ±0.2 mm)
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size D0
D
1
Minimum
Note 1
E1P0 P2
R Reference
Note 2
S
1
Minimum
Note 3
T Maximum
T
1
Maximum
8 mm
1.5 +0.10/−0.0
(0.059 +0.004/−0.0)
1.0
(0.039) 1.75 ±0.10
(0.069 ±0.004)
4.0 ±0.10
(0.157 ±0.004)
2.0 ±0.05
(0.079 ±0.002)
25.0
(0.984) 0.600
(0.024)
0.600
(0.024)
0.100
(0.004)
12 mm 1.5
(0.059)
30
(1.181)
Variable Dimensions — Millimeters (Inches)
Tape Size Pitch
B
1
Maximum
Note 4
E2 Minimum F P1 T2 Maximum W Maximum A0, B0 & K0
8 mm Single (4 mm) 4.35
(0.171)
6.25
(0.246)
3.5 ±0.05
(0.138 ±0.002)
2.0 ±0.05 or 4.0 ±0.10
(0.079 ±0.002 or 0.157 ±0.004)
2.5
(0.098)
8.3
(0.327)
Note 5
12 mm
Single (4 mm)
and Double
(8 mm)
8.2
(0.323)
10.25
(0.404)
5.5 ±0.05
(0.217 ±0.002)
2.0 ±0.05 (0.079 ±0.002) or
4.0 ±0.10 (0.157 ±0.004) or
8.0 ±0.10 (0.315 ±0.004)
4.6
(0.181)
12.3
(0.484)
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment
location and hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 4).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity de ned by A0, B0 and K0 shall surround the component with suffi cient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape (see Figure 3).
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
37© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
37
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width Peel Strength
8 mm 0.1 to 1.0 Newton (10 to 100 gf)
12 mm 0.1 to 1.3 Newton (10 to 130 gf)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be
165° to 180° from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of
300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
Ao
Bo
°
T
°
s
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Tape
Width (mm)
Maximum
Rotation (°
T)
8, 12 20 Tape
Width (mm)
Maximum
Rotation (
8, 12 20
°
S)
Typical Pocket Centerline
Typical Component Centerline
Figure 3 – Maximum Lateral Movement
0.5 mm maximum
0.5 mm maximum
8 mm & 12 mm Tape
Figure 4 – Bending Radius
RR
Bending
Radius
Embossed
Carrier
Punched
Carrier
38© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
38
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Figure 5 – Reel Dimensions
AD(See Note)
Full Radius,
See Note
B(see Note)
Access Hole at
Slot Location
(Ø 40 mm minimum)
If present,
tape slot in core
for tape start:
2.5 mm minimum width x
10.0 mm minimum depth
W3(Includes
flange distortion
at outer edge)
W2(Measured at hub)
W1(Measured at hub)
C
(Arbor hole
diameter)
Note: Drive spokes optional; if used, dimensions B and D shall apply.
N
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size A B Minimum C D Minimum
8 mm
178 ±0.20
(7.008 ±0.008)
or
330 ±0.20
(13.000 ±0.008)
1.5
(0.059)
13.0 +0.5/−0.2
(0.521 +0.02/−0.008)
20.2
(0.795)
12 mm
Variable Dimensions — Millimeters (Inches)
Tape Size N Minimum W1 W2 Maximum W3
8 mm 50
(1.969)
8.4 +1.5/−0.0
(0.331 +0.059/−0.0)
14.4
(0.567)
Shall accommodate tape
width without interference
12 mm
12.4 +2.0/−0.0
(0.488 +0.078/−0.0)
18.4
(0.724)
39© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
39
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
Figure 6 – Tape Leader & Trailer Dimensions
Trailer
160 mm minimum
Carrier Tape
END START
Round Sprocket Holes
Elongated Sprocket Holes
(32 mm tape and wider)
Top Cover Tape
Top Cover Tape
Punched Carrier
8 mm & 12 mm only
Embossed Carrier
Components
100 mm
minimum Leader
400 mm minimum
Figure 7 – Maximum Camber
Carrier Tape
Round Sprocket Holes
1 mm maximum, either direction
Straight Edge
250 mm
Elongated Sprocket Holes
(32 mm & wider tapes)
40© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/11/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
40
KEMET Organic Capacitor (KO-CAP®)
T52x/T530 Polymer Electrolytic Capacitors
KEMET Electronics Corporation Sales Offi ces
For a complete list of our global sales o ces, please visit www.kemet.com/sales.
Disclaimer
All product speci cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET speci cally disclaims – any warranty concerning suitability for a speci c customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes
no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury
or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.