SIMATIC S7-1200 S7-1200 Signal modules and spare parts Product Information S7-1200 Signal modules (SM) Siemens is pleased to announce the following new and improved S7-1200 signal modules for use with STEP 7 V11 w/HSP Basic and Professional software (HSP_V11SP2_0033_001_S71200_SM_2.0). The order numbers of the signal modules are shown below. The old order numbers are also shown for reference. Signal module Old order number New order number SM 1221 8 x 24 VDC Input (Sink/Source) 6ES7 221-1BF30-0XB0 6ES7 221-1BF32-0XB0 SM 1221 16 x 24 VDC Input (Sink/Source) 6ES7 221-1BH30-0XB0 6ES7 221-1BH32-0XB0 SM 1222 8 x 24 VDC Output (Source) 6ES7 222-1BF30-0XB0 6ES7 222-1BF32-0XB0 SM 1222 16 x 24 VDC Output (Source) 6ES7 222-1BH30-0XB0 6ES7 222-1BH32-0XB0 SM 1222 8 x Relay Output 6ES7 222-1HF30-0XB0 6ES7 222-1HF32-0XB0 SM 1222 8 x Relay Output (CO) 6ES7 222-1XF30-0XB0 6ES7 222-1XF32-0XB0 SM 1222 16 x Relay Output 6ES7 222-1HH30-0XB0 6ES7 222-1HH32-0XB0 SM 1223 8 x 24 VDC Input (Sink/Source) / 8 x 24 VDC Output (Source) 6ES7 223-1BH30-0XB0 6ES7 223-1BH32-0XB0 SM 1223 16 x 24 VDC Input (Sink/Source) / 16 x 24VDC Output (Source) 6ES7 223-1BL30-0XB0 6ES7 223-1BL32-0XB0 SM 1223 8 x 24 VDC Input (Sink/Source) / 8 x Relay Output 6ES7 223-1PH30-0XB0 6ES7 223-1PH32-0XB0 SM 1223 16 x 24 VDC Input (Sink/Source) / 16 x Relay Output 6ES7 223-1PL30-0XB0 6ES7 223-1PL32-0XB0 SM 1223 DI 8 x 120/230 VAC Input (Sink/Source) / 8 x Relay Output 6ES7 223-1QH30-0XB0 6ES7 223-1QH32-0XB0 SM 1231 4 x Analog Input 6ES7 231-4HD30-0XB0 6ES7 231-4HD32-0XB0 SM 1231 8 x Analog Input 6ES7 231-4HF30-0XB0 6ES7 231-4HF32-0XB0 SM 1232 2 x Analog Output 6ES7 232-4HB30-0XB0 6ES7 232-4HB32-0XB0 SM 1232 4 x Analog Output 6ES7 232-4HD30-0XB0 6ES7 232-4HD32-0XB0 SM 1234 4 x Analog Input / 2 x Analog Output 6ES7 234-4HE30-0XB0 6ES7 234-4HE32-0XB0 Improved feature sets These signal modules now have the following features: 4-20 mA range added to the analog input and output modules listed above. Refer to the S7-1200 System Manual (04/2012), table A-135 for Analog input representation for current. The new table for Analog output representation for current is shown below. Wirebreak detection when using 4-20 mA added to the analog input modules listed above Connector keying to prevent errors when plugging in field wiring connectors added to the modules with relay outputs, listed above Table 1 Analog output representation for current System Current Output Range Decimal Hexadecimal 0 mA to 20 mA 4 mA to 20 mA 32767 7FFF See note 1 See note 1 (c) Siemens AG 2012. All rights reserved A5E31295273-AA, 01/2013 Overflow 1 System Decimal 1 Current Output Range Hexadecimal 0 mA to 20 mA 4 mA to 20 mA 32512 7F00 See note 1 See note 1 32511 7EFF 23.52 mA 22.81 mA Overshoot range 27649 6C01 27648 6C00 20 mA 20 mA Rated range 20736 5100 15 mA 16 mA 1 1 723.4 nA 4 mA + 578.7 nA 0 0 0 mA 4mA -1 FFFF 4 mA to 578.7 nA -6912 E500 0 mA -6913 E4FF -32512 8100 Undershoot range Not possible. Output value limited to 0 mA. -32513 80FF See note 1 See note 1 -32768 8000 See note 1 See note 1 Underflow In an overflow or underflow condition, analog outputs will take on the substitute value of the STOP mode. Spare parts compatibility The new signal modules (6ES7 2xx-xxx32-0XB0) replace existing signal modules (6ES7 2xx-xxx30-0XB0) and are compatible. You can employ the revised modules in place of the existing SM modules without any changes. Software requirements To use the improved analog signal modules, you must configure the module with its new order number, and if applicable, with the corresponding HSP_V11SP2_0033_001_S71200_SM_2.0. Because uploading a module configuration from the device configuration editor cannot recognize the new signal modules, you must manually include them in your project. Drag and drop the signal modules from the hardware catalog into the device configuration. New spare parts The following spare parts are now available for use with the S7-1200 CPUs. Item Order number Terminal block, keyed left, 7 contact 6ES7 292-1AG40-0XA1 Terminal block, keyed right, 7 contact 6ES7 292-1AG40-0XA0 Terminal block, keyed right, 8 contact 6ES7 292-1AH40-0XA0 Terminal block, keyed right, 11 contact 6ES7 292-1AL40-0XA0 Terminal block, keyed right, 12 contact 6ES7 292-1AM40-0XA0 Terminal block, keyed right, 14 contact 6ES7 292-1AP40-0XA0 Terminal block, keyed right, 20 contact 6ES7 292-1AV40-0XA0 Refer to the SIMATIC S7-1200 Programmable Controller System Manual for technical specifications for these signal modules, and for more information about the S7-1200 product family. Additional assistance For assistance in answering technical questions, for training on these products, or for ordering, contact your Siemens distributor or sales office. Siemens AG Industry Sector Postfach 48 48 90026 NURNBERG S7-1200 Signal modules and spare parts A5E31295273-AA, 01/2013 2 S7-1200 Signal modules and spare parts A5E31295273-AA, 01/2013