© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3070_PME261 • 2/20/2014 1
One world. One KEMET
Benets
• Voltage range: 400 – 1,000 VDC; 220 – 500 VAC
• Capacitance range: 0.001 – 1 µF
• Lead spacing: 10.2 – 25.4 mm
• Capacitance tolerance: ±10%, ±20%, ±5% on request
• Climatic category: 40/70/56, IEC 60068–1
• Tape and reel packaging in accordance with IEC 60286–2
• RoHS Compliant and lead-free terminations
• Operatingtemperaturerangeof-40˚Cto+70˚CinACapplications
• Operatingtemperaturerangeof-40˚Cto+100˚CinDCapplications
• Excellent self-healing properties. Ensures long life even when
subjected to frequent over-voltages.
• Good resistance to ionization due to impregnated dielectric
• IEC Publication 166 Type 1
• High dV/dt capability
• Approved according to SE–MIL–QPL
• The capacitors meet the most
stringent IEC humidity class, 56 days
• The impregnated paper ensures
excellent stability giving outstanding
reliability properties, especially
in applications having continuous
operation
Overview
The PME261 Series is constructed of multilayer metallized paper,
encapsulated and impregnated in self-extinguishing material
meeting the requirements of UL 94 V–0.
Applications
For general use in DC and low frequency pulse applications.
General Purpose, Pulse and DC Transient Suppression
PME261 Series Metallized Impregnated Paper,
10.2 – 25.4 mm Lead Spacing, 400 – 1,000 VDC
Legacy Part Number System
PME261 K A 5100 KR30
Series Rated Voltage (VAC) Lead Spacing (mm) Capacitance Code (pF)
Capacitance
Tolerance
Lead and
Packaging Code
Metallized Paper K = 220
E = 300
J = 500
A = 10.2
B = 15.2
C = 20.3
E = 25.4
Digits2–4indicatetherstthree
digits of the capacitance value.
First digit indicates the total number
of digits in the capacitance value
J = ±5%
K = ±10%
M = ±20%
See Ordering
Options Table
New KEMET Part Number System
P561 H E 103 K220 A
Capacitor Class Series Lead Spacing
(mm) Size Code Capacitance Code (pF) Capacitance
Tolerance
Rated Voltage
(VAC)
Lead and
Packaging Code
P = Paper Metallized Paper
General Purpose
H = 10.2
Q = 15.2
C = 20.3
E = 25.4
See Dimension
Table
First two digits indicate the
twomostsignicantdigits
of the capacitance value in
picofarads. The third digit is
the number of following zeros.
J = ±5%
K = ±10%
M = ±20%
220 = 220
300 = 300
500 = 500
See Ordering
Options Table
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3070_PME261 • 2/20/2014 2
Film Capacitors – General Purpose, Pulse and DC Transient Suppression
PME261 Series Metallized Impregnated Paper, 10.2 – 25.4 mm Lead Spacing, 400 – 1,000 VDC
Ordering Options Table
Lead
Spacing
Nominal
(mm)
Type of Leads and Packaging Lead Length
(mm)
KEMET
Lead and
Packaging
Code
Legacy
Lead and
Packaging
Code
10.2
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
6+0/-1
C
R06
Bulk (Bag) – Max Length Leads
17+0/-1
A
R17
Tape & Reel (Standard Reel)
H0=18.5+/-0.5
L
R19T0
Other Lead and Packaging Options
Tape & Reel (Large Reel) H
0
=18.5+/-0.5 PR19T1
Native 10.2
formed to 7.5
Ammo Pack H0=16.5+/-0.5 LAF3 R30XA
15.2
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
6+0/-1
C
R06
Bulk (Bag) – Max Length Leads
30+5/-0
A
R30
Tape & Reel (Standard Reel)
H0=18.5+/-0.5
L
R19T0
Other Lead and Packaging Options
Tape & Reel (Large Reel)
H0=18.5+/-0.5
P
R19T1
20.3
Standard Lead and Packaging Options
Bulk (Tray) – Short Leads
6+0/-1
C
R06
Bulk (Bag) – Max Length Leads
30+5/-0
A
R30
Tape & Reel (Standard Reel)
H0=18.5+/-0.5
L
R19T0
Other Lead and Packaging Options
Tape & Reel (Large Reel)
H0=18.5+/-0.5
P
R19T1
25.4
Standard Lead and Packaging Options
Bulk (Tray) – Short Leads
6+0/-1
C
R06
Bulk (Bag) – Max Length Leads
30+5/-0
A
R30
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3070_PME261 • 2/20/2014 3
Film Capacitors – General Purpose, Pulse and DC Transient Suppression
PME261 Series Metallized Impregnated Paper, 10.2 – 25.4 mm Lead Spacing, 400 – 1,000 VDC
Dimensions – Millimeters
L
B
d
p
LL
Size Code pBHL d
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
HE
10.2
+/-0.4
3.9
Maximum
7.5
Maximum
13.5
Maximum
0.6
+/-0.05
HL
10.2
+/-0.4
5.1
Maximum
10.5
Maximum
13.5
Maximum
0.6
+/-0.05
QE
15.2
+/-0.4
5.2
Maximum
10.5
Maximum
18.5
Maximum
0.8
+/-0.05
QM
15.2
+/-0.4
7.3
Maximum
13.0
Maximum
18.5
Maximum
0.8
+/-0.05
QP
15.2
+/-0.4
7.8
Maximum
13.5
Maximum
18.5
Maximum
0.8
+/-0.05
CE
20.3
+/-0.4
7.6
Maximum
14.0
Maximum
24.0
Maximum
0.8
+/-0.05
CG
20.3
+/-0.4
8.4
Maximum
14.0
Maximum
24.0
Maximum
0.8
+/-0.05
CJ
20.3
+/-0.4
9.0
Maximum
15.0
Maximum
24.0
Maximum
0.8
+/-0.05
CP
20.3
+/-0.4
11.3
Maximum
16.5
Maximum
24.0
Maximum
0.8
+/-0.05
EH
25.4
+/-0.4
10.6
Maximum
17.3
Maximum
30.5
Maximum
1
+/-0.05
EL
25.4
+/-0.4
15.3
Maximum
22.0
Maximum
30.5
Maximum
1
+/-0.05
Note: See Ordering Options Table for lead length (LL) options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3070_PME261 • 2/20/2014 4
Film Capacitors – General Purpose, Pulse and DC Transient Suppression
PME261 Series Metallized Impregnated Paper, 10.2 – 25.4 mm Lead Spacing, 400 – 1,000 VDC
Performance Characteristics
Rated Voltage VR (VDC) 400 630 1000
Rated Voltage VR (VAC) 220 300 500
Capacitance Range (µF) 0.0082 – 1.0 0.001 – 0.15 0.001 – 0.1
Capacitance Tolerance ±10%, ±20%, ±5% on request
Temperature Range
-40to+70°C
-40to+100°C
Climatic Category 40/070/56
DissipationFactortanδ
MaximumValuesat+23°C
1 kHz 1.3%
Insulation Resistance
Measuredat+20°C,AccordingtoIEC60384–2
Minimum Values Between Terminals
C≤0.33µF ≥12,000MΩ
C > 0.33 µF ≥4,000MΩ•µF
PME261Kmeasuredat100VDCafter60seconds,+23°C
PME261EandJmeasuredat500VDCafter60seconds,+23°C
Environmental Test Data
Test
IEC Publication
Procedure
Vibration IEC 60068–2–6 Test Fc 3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s2
Bump IEC 60068–2–29 Test Eb 4,000 bumps at 390 m/s2
Solderability IEC 60068–2–20 Test Ta
Solder globule method
Wetting time
ford≤0.8<1second
ford>0.8<1.5seconds
Passive Flammability IEC 60695–2–2
Damp Heat Steady State IEC 60068-2-3 Test Ca +40°Cand90–95%RH,56days
Environmental Compliance
All KEMET MKTI capacitors are RoHS Compliant.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3070_PME261 • 2/20/2014 5
Film Capacitors – General Purpose, Pulse and DC Transient Suppression
PME261 Series Metallized Impregnated Paper, 10.2 – 25.4 mm Lead Spacing, 400 – 1,000 VDC
Table 1 – Ratings & Part Number Reference
Capacitance
Value (µF)
Max Dimensions in mm Lead Spacing (p) dV/dt
(V/µs)
New Kemet
Part Number Legacy Part Number
B H L
0.0082 3.9 7.5 13.5 10.2 2000 P561HE822(1)220(2) PME261KA4820(1)(2)
0.010 3.9 7.5 13.5 10.2 2000 P561HE103(1)220(2) PME261KA5100(1)(2)
0.015 5.1 10.5 13.5 10.2 2000 P561HL153(1)220(2) PME261KA5150(1)(2)
0.022 5.1 10.5 13.5 10.2 2000 P561HL223(1)220(2) PME261KA5220(1)(2)
0.033 5.2 10.5 18.5 15.2 1600 P561QE333(1)220(2) PME261KB5330(1)(2)
0.047 5.2 10.5 18.5 15.2 1300 P561QE473(1)220(2) PME261KB5470(1)(2)
0.068 7.3 13.0 18.5 15.2 1100 P561QM683(1)220(2) PME261KB5680(1)(2)
0.1 7.3 13.0 18.5 15.2 850 P561QM104(1)220(2) PME261KB6100(1)(2)
0.15 7.6 14.0 24.0 20.3 700 P561CE154(1)220(2) PME261KC6150(1)(2)
0.22 8.4 14.0 24.0 20.3 560 P561CG224(1)220(2) PME261KC6220(1)(2)
0.33 11.3 16.5 24.0 20.3 430 P561CP334(1)220(2) PME261KC6330(1)(2)
0.47 10.6 17. 3 30.5 25.4 370 P561EH474(1)220(2) PME261KE6470(1)(2)
0.68 15.3 22.0 30.5 25.4 300 P561EL684(1)220(2) PME261KE6680(1)(2)
115.3 22.0 30.5 25.4 220 P561EL105(1)220(2) PME261KE7100(1)(2)
0.001 3.9 7.5 13.5 10.2 2000 P561HE102(1)300(2) PME261EA4100(1)(2)
0.0015 3.9 7.5 13.5 10.2 2000 P561HE152(1)300(2) PME261EA4150(1)(2)
0.0022 3.9 7.5 13.5 10.2 2000 P561HE222(1)300(2) PME261EA4220(1)(2)
0.0033 3.9 7.5 13.5 10.2 2000 P561HE332(1)300(2) PME261EA4330(1)(2)
0.0047 3.9 7.5 13.5 10.2 2000 P561HE472(1)300(2) PME261EA4470(1)(2)
0.0068 3.9 7. 5 13.5 10.2 2000 P561HE682(1)300(2) PME261EA4680(1)(2)
0.01 5.1 10.5 13.5 10.2 2000 P561HL103(1)300(2) PME261EA5100(1)(2)
0.015 5.1 10.5 13.5 10.2 2000 P561HL153(1)300(2) PME261EA5150(1)(2)
0.022 5.2 10.5 18.5 15.2 2000 P561QE223(1)300(2) PME261EB5220(1)(2)
0.033 5.2 10.5 18.5 15.2 2000 P561QE333(1)300(2) PME261EB5330(1)(2)
0.047 7.3 13.0 18.5 15.2 1600 P561QM473(1)300(2) PME261EB5470(1)(2)
0.068 7.3 13.0 18.5 15.2 1200 P561QM683(1)300(2) PME261EB5680(1)(2)
0.1 7.6 14.0 24.0 20.3 900 P561CE104(1)300(2) PME261EC6100(1)(2)
0.15 9.0 15.0 24.0 20.3 650 P561CJ154(1)300(2) PME261EC6150(1)(2)
0.001 3.9 7.5 13.5 10.2 2000 P561HE102(1)500(2) PME261JA4100(1)(2)
0.0015 3.9 7.5 13.5 10.2 2000 P561HE152(1)500(2) PME261JA4150(1)(2)
0.0022 3.9 7.5 13.5 10.2 2000 P561HE222(1)500(2) PME261JA4220(1)(2)
0.0033 3.9 7.5 13.5 10.2 2000 P561HE332(1)500(2) PME261JA4330(1)(2)
0.0047 5.1 10.5 13.5 10.2 2000 P561HL472(1)500(2) PME261JA4470(1)(2)
0.0068 5.1 10.5 13.5 10.2 2000 P561HL682(1)500(2) PME261JA4680(1)(2)
0.01 5.2 10.5 18.5 15.2 2000 P561QE103(1)500(2) PME261JB5100(1)(2)
0.015 5.2 10.5 18.5 15.2 2000 P561QE153(1)500(2) PME261JB5150(1)(2)
0.022 7.3 13.0 18.5 15.2 2000 P561QM223(1)500(2) PME261JB5220(1)(2)
0.033 7.8 13.5 18.5 15.2 2000 P561QP333(1)500(2) PME261JB5330(1)(2)
0.047 7.6 14.0 24.0 20.3 2000 P561CE473(1)500(2) PME261JC5470(1)(2)
0.068 9.0 15.0 24.0 20.3 1400 P561CJ683(1)500(2) PME261JC5680(1)(2)
0.1 11.3 16.5 24.0 20.3 950 P561CP104(1)500(2) PME261JC6100(1)(2)
Capacitance
Value (µF) B (mm) H (mm) L (mm) Lead Spacing (p) dV/dt (V/µs) New KEMET
Part Number Legacy Part Number
(1) K = ±10%, M = ±20%, J = ±5% on request.
(2) Insert lead and packaging code. See Ordering Options Table for available options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3070_PME261 • 2/20/2014 6
Film Capacitors – General Purpose, Pulse and DC Transient Suppression
PME261 Series Metallized Impregnated Paper, 10.2 – 25.4 mm Lead Spacing, 400 – 1,000 VDC
Soldering Process
The implementation of the RoHS Directive has required the selection
SnAuCu (SAC) alloys or SnCu alloys as primary solder. This has
increasedtheliquidustemperaturefromthatof183°CforSnPb
eutecticalloyto217°C–221°Cforthenewalloys.Asaresult,the
heat stress to components, even in wave soldering, has increased
considerably due to higher pre-heat and wave temperatures. Wave
soldering can be destructive especially for mechanically small
polypropylene capacitors and great care must be taken during
soldering.ThesolderprolesfromKEMETarehighlyrecommended.
You may also refer to the wave soldering curve from IEC Publication
61760–1 Edition 2. Please consult KEMET with any questions.
Marking
• KEMET’s logo
• Series
• Capacitance
• Rated voltage AC/DC
• MP for metallized paper
• Manufacturing date code
• IEC climatic category
• Manufacturing plant
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3070_PME261 • 2/20/2014 7
Film Capacitors – General Purpose, Pulse and DC Transient Suppression
PME261 Series Metallized Impregnated Paper, 10.2 – 25.4 mm Lead Spacing, 400 – 1,000 VDC
Packaging Quantities
Lead Spacing
(mm)
Thickness
(mm)
Height
(mm)
Length
(mm)
Bulk
Short Leads
Bulk
Long Leads
Standard Reel
ø 360 mm
Large Reel
ø 500 mm
Ammo
Formed
10.2
3.9
7.5
13.5
2000
1000
700
1400
800
4.1
8.2
13.5
2000
1000
600
780
5.1
10.5
13.5
1600
800
600
1200
630
15.2
5.5
12.5
18
1000
500
600
6.5
12.5
18
600
400
400
7.5
14.5
18
600
400
400
8.5
16
18
400
250
400
5.2
10.5
18.5
1000
500
600
5.5
11
18.5
1000
500
500
6
12.5
18.5
600
400
400
7.3
13
18.5
600
400
400
800
7.8
13.5
18.5
600
400
400
8.5
14.3
18.5
500
300
350
20.3
7.6
14
24
1500
250
250
500
8.4
14
24
1200
200
250
500
9
15
24
1500
200
250
11.3
16.5
24
1000
150
180
400
25.4
10.6
16.1
30.5
1000
150
10.5
17.3
30.5
1000
100
12.1
19
30.5
800
100
15.3
22
30.5
600
75
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3070_PME261 • 2/20/2014 8
Film Capacitors – General Purpose, Pulse and DC Transient Suppression
PME261 Series Metallized Impregnated Paper, 10.2 – 25.4 mm Lead Spacing, 400 – 1,000 VDC
Lead Taping & Packaging (IEC 60286–2)
Taping Speci cation
Dimensions in mm
Standard IEC 60286–2
Lead spacing +6/-0.1 F
Formed
7.5
10.2 15.2 20.3 22.5 F
Carrier tape width +/-0.5 W18 18 18 18 18 18+1/-0.5
Hold-down tape width +/-0.3 W
0
912 12 12 12
Position of sprocket hole +/-0.5 W
1
99999 9+0.75/-0.5
Distance between tapes Maximum W
2
33333 3
Sprocket hole diameter +/-0.2 D
0
44444 4
Feed hole lead spacing +/-0.3 P
0
(1) 12.7(4) 12.7 12.7 12.7 12.7 12.7
Distance lead – feed hole +/-0.7 P
1
3.75 7.6 5.1 8.9 5.3 P1
Deviation tape – plane Maximum ∆p 1.3 1.3 1.3 1.3 1.3 1.3
Lateral deviation Maximum ∆h 22222 2
Total thickness +/-0.2 t0.7 0.7 0.7 0.7 0.9MAX 0.9MAX
Sprocket hole/cap body Nominal H
0
(2) 18+2/-0 18+2/-0 18+2/-0 18+2/-0 18.5+/-0.5 18+2/-0
Sprocket hole/top of cap body Maximum H
1
(3) 35 35 35 35 58 58MAX
(1) Maximum cumulative feed hole error, 1 mm per 20 parts.
(2) 16.5 mm available on request.
(3) Depending on case size.
(4) 15 mm available on request.
Lead Spacing 10.2 – 15.2 mm
Lead Spacing 20.3 – 22.5 mm
Formed Leads from 10.2 to 7.5 mm
0
0
0
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3070_PME261 • 2/20/2014 9
Film Capacitors – General Purpose, Pulse and DC Transient Suppression
PME261 Series Metallized Impregnated Paper, 10.2 – 25.4 mm Lead Spacing, 400 – 1,000 VDC
H
T
W
Lead Taping & Packaging (IEC 60286–2) cont'd
Ammo Speci cations
Series Dimensions (mm)
H
W
T
R4x,R4x+R,R7x,RSB
360 340 59
F5A, F5B, F5D
F6xx, F8xx
PHExxx, PMExxx, PMRxxx
330
330
50
Reel Speci cations
Series
Dimensions (mm)
D
H
W
R4x,R4x+R,R7x,RSB
355
500
30
25 55 (Max)
F5A, F5B, F5D
F6xx, F8xx
PHExxx, PMExxx, PMRxxx
360
500
30 46 (Max)
Manufacturing Date Code (IEC–60062)
Y = Year, Z = Month
Year
Code
Month
Code
2000
M
January
1
2001
N
February
2
2002
P
March
3
2003
R
April
4
2004
S
May
5
2005
T
June
6
2006
U
July
7
2007
V
August
8
2008
W
September
9
2009
X
October
O
2010
A
November
N
2011
B
December
D
2012
C
2013
D
2014
E
2015
F
2016
H
2017
J
2018
K
2019
L
2020
M
D
W
H
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3070_PME261 • 2/20/2014 10
Film Capacitors – General Purpose, Pulse and DC Transient Suppression
PME261 Series Metallized Impregnated Paper, 10.2 – 25.4 mm Lead Spacing, 400 – 1,000 VDC
KEMET Corporation
World Headquarters
2835 KEMET Way
Simpsonville, SC 29681
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Corporate Of ces
Fort Lauderdale, FL
Tel: 954-766-2800
North America
Southeast
Lake Mary, FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
Central
Novi, MI
Tel: 248-306-9353
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Europe
Southern Europe
Paris, France
Tel: 33-1-4646-1006
Sasso Marconi, Italy
Tel: 39-051-939111
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Kamen, Germany
Tel: 49-2307-438110
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-460122
Espoo, Finland
Tel: 358-9-5406-5000
Asia
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Shenzhen, China
Tel: 86-755-2518-1306
Beijing, China
Tel: 86-10-5829-1711
Shanghai, China
Tel: 86-21-6447-0707
Taipei, Taiwan
Tel: 886-2-27528585
Southeast Asia
Singapore
Tel: 65-6586-1900
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3070_PME261 • 2/20/2014 11
Film Capacitors – General Purpose, Pulse and DC Transient Suppression
PME261 Series Metallized Impregnated Paper, 10.2 – 25.4 mm Lead Spacing, 400 – 1,000 VDC
Disclaimer
Allproductspecications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsibleforcheckingand
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuchapplications,butare
notintendedtoconstitute–andKEMETspecicallydisclaims–anywarrantyconcerningsuitabilityforaspeciccustomerapplicationoruse.TheInformationisintendedforuseonly
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not
be required.