SMD B 12-23C/R6GHBHC-A01/2C Features Package in 8mm tape on 7diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Multi-color type. Pb-free. The product itself will remain within RoHS compliant version. Compliance with EU REACH. Compliance Halogen Free .(Br <900 ppm ,Cl <900 ppm , Br+Cl < 1500 ppm). Description The 12-23C SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc. Applications Backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use. 1 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : 25.Nov .2016. Issue No: DSE-0005517 Rev.9 www.everlight.com DATASHEET SMD B 12-23C/R6GHBHC-A01/2C Device Selection Guide Chip Code Emitted Color Materials R6 AlGaInP Brilliant Red GH InGaN Brilliant Green BH InGaN Blue Resin Color Water Clear Absolute Maximum Ratings (Ta=25) Parameter Symbol Reverse Voltage VR Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) IF IFP Pd ESD Code Rating Unit 5 V R6 25 GH 25 BH 20 R6 60 GH 100 BH 100 R6 60 GH 95 BH 75 R6 2000 GH 150 BH 150 mA mA mW V Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40 ~ +90 Soldering Temperature Tsol 2 Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec. Copyright (c) 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0005517 Rev.9 www.everlight.com DATASHEET SMD B 12-23C/R6GHBHC-A01/2C Electro-Optical Characteristics (Ta=25) Parameter Symbol Luminous Intensity Viewing Angle Peak Wavelength Min. Typ. Max. R6 63 90 ----- GH 125 180 ----- BH 32 50 ----- ----- 100 ----- R6 ----- 632 ----- GH ----- 518 ----- BH ----- 468 ----- R6 ----- 624 ----- 21/2 p Unit Condition mcd Deg nm IF=20mA Dominant d Wavelength Spectrum Iv Code Radiation Bandwidth Forward Voltage Reverse Current VF IR GH ----- 525 ----- BH ----- 470 ----- R6 ----- 20 ----- GH ----- 35 ----- BH ----- 25 ----- R6 ----- 2.0 2.4 GH ----- 3.3 3.9 BH ----- 3.3 3.9 R6 ----- ----- 10 GH ----- ----- 50 BH ----- ----- 50 nm nm V A VR=5V Note: 1.Tolerance of Luminous Intensity: 11% 2. Tolerance of Forward Voltage 0.1V 3 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0005517 Rev.9 www.everlight.com DATASHEET SMD B 12-23C/R6GHBHC-A01/2C Typical Electro-Optical Characteristics Curves R6 4 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0005517 Rev.9 www.everlight.com DATASHEET SMD B 12-23C/R6GHBHC-A01/2C Typical Electro-Optical Characteristics Curves GH 5 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0005517 Rev.9 www.everlight.com DATASHEET SMD B 12-23C/R6GHBHC-A01/2C Typical Electro-Optical Characteristics Curves BH 6 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0005517 Rev.9 www.everlight.com DATASHEET SMD B 12-23C/R6GHBHC-A01/2C Package Dimension Note: Tolerances unless mentioned 0.1mm. Unit = mm 7 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0005517 Rev.9 www.everlight.com DATASHEET SMD B 12-23C/R6GHBHC-A01/2C Moisture Resistant Packing Materials Label Explanation CPN: Customer's Product Number P/N: Product Number QTY: Packing Quantity CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates & Dom. Wavelength Rank REF: Forward Voltage Rank LOT No: Lot Number Reel Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm 8 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0005517 Rev.9 www.everlight.com DATASHEET SMD B 12-23C/R6GHBHC-A01/2C Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Moisture Resistant Packaging Label 9 Aluminum moisture-proof bag Desiccant Label Copyright (c) 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0005517 Rev.9 www.everlight.com DATASHEET SMD B 12-23C/R6GHBHC-A01/2C Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. . 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 260C Max. 10sec. Max. Above255C 30sec.Max. 3C/sec.Max. 6C/sec.Max. Pre-heating Above 217C 60~150sec. 150~200C 60~120sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 10 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0005517 Rev.9 www.everlight.com DATASHEET SMD B 12-23C/R6GHBHC-A01/2C Application Restrictions High reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. If you have any concerns, please contact Everlight before using this product in your application. This specification guarantees the quality and performance of the product as an individual component. Do not use this product beyond the specification described in this document. 11 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0005517 Rev.9 www.everlight.com DATASHEET SMD B 12-23C/R6GHBHC-A01/2C DISCLAIMER 1.EVERLIGHT reserves the right(s) on the adjustment of product material mix for the specification. 2.The product meets EVERLIGHT published specification for a period of twelve (12) months from date of shipment. 3.The graphs shown in this datasheet are representing typical data only and do not show guaranteed values. 4.When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from the use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 5.These specification sheets include materials protected under copyright of EVERLIGHT. Reproduction in any form is prohibited without obtaining EVERLIGHT's prior consent. 6.This product is not intended to be used for military, aircraft, automotive, medical, life sustaining or life saving applications or any other application which can result in human injury or death. Please contact authorized Everlight sales agent for special application request. 12 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0005517 Rev.9 www.everlight.com