1
Copyright © 2010, Everlight All Rights Reserved. Release Date : 25.Nov .2016. Issue No: DSE-0005517 Rev.9
www.everlight.com
SMD B
12-23C/R6GHBHC-A01/2C
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow solder process.
․Multi-color type.
․Pb-free.
․The product itself will remain within RoHS compliant version.
․Compliance with EU REACH.
․Compliance Halogen Free .(Br <900 ppm ,Cl <900 ppm , Br+Cl < 1500 ppm).
Description
․The 12-23C SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher
packing density, reduced storage space and finally smaller equipment to be obtained.
․Besides, lightweight makes them ideal for miniature applications. etc.
Applications
․Backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
DATASHEET
SMD B
12-23C/R6GHBHC-A01/2C
2
Copyright © 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0005517 Rev.9
www.everlight.com
Device Selection Guide
Code
Chip
Materials
Emitted Color
Resin Color
R6
AlGaInP
Brilliant Red
Water Clear
GH
InGaN
Brilliant Green
BH
InGaN
Blue
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Code
Rating
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
R6
25
mA
GH
25
BH
20
Peak Forward Current
(Duty 1/10 @1KHz)
IFP
R6
60
mA
GH
100
BH
100
Power Dissipation
Pd
R6
60
mW
GH
95
BH
75
Electrostatic
Discharge(HBM)
ESD
R6
2000
V
GH
150
BH
150
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40 ~ +90
℃
Soldering Temperature
Tsol
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
DATASHEET
SMD B
12-23C/R6GHBHC-A01/2C
3
Copyright © 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0005517 Rev.9
www.everlight.com
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Code
Min.
Typ.
Max.
Unit
Condition
Luminous Intensity
Iv
R6
63
90
-----
mcd
IF=20mA
GH
125
180
-----
BH
32
50
-----
Viewing Angle
2θ1/2
-----
100
-----
Deg
Peak Wavelength
λp
R6
-----
632
-----
nm
GH
-----
518
-----
BH
-----
468
-----
Dominant
Wavelength
λd
R6
-----
624
-----
nm
GH
-----
525
-----
BH
-----
470
-----
Spectrum Radiation
Bandwidth
△λ
R6
-----
20
-----
nm
GH
-----
35
-----
BH
-----
25
-----
Forward Voltage
VF
R6
-----
2.0
2.4
V
GH
-----
3.3
3.9
BH
-----
3.3
3.9
Reverse Current
IR
R6
-----
-----
10
μA
VR=5V
GH
-----
-----
50
BH
-----
-----
50
Note:
1.Tolerance of Luminous Intensity: ±11%
2. Tolerance of Forward Voltage ±0.1V
DATASHEET
SMD B
12-23C/R6GHBHC-A01/2C
4
Copyright © 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0005517 Rev.9
www.everlight.com
Typical Electro-Optical Characteristics Curves
R6
DATASHEET
SMD B
12-23C/R6GHBHC-A01/2C
5
Copyright © 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0005517 Rev.9
www.everlight.com
Typical Electro-Optical Characteristics Curves
GH
DATASHEET
SMD B
12-23C/R6GHBHC-A01/2C
6
Copyright © 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0005517 Rev.9
www.everlight.com
Typical Electro-Optical Characteristics Curves
BH
DATASHEET
SMD B
12-23C/R6GHBHC-A01/2C
7
Copyright © 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0005517 Rev.9
www.everlight.com
Package Dimension
Note: Tolerances unless mentioned ±0.1mm. Unit = mm
DATASHEET
SMD B
12-23C/R6GHBHC-A01/2C
8
Copyright © 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0005517 Rev.9
www.everlight.com
Moisture Resistant Packing Materials
Label Explanation
‧CPN: Customer’s Product Number
‧P/N: Product Number
‧QTY: Packing Quantity
‧CAT: Luminous Intensity Rank
‧HUE: Chromaticity Coordinates & Dom. Wavelength Rank
‧REF: Forward Voltage Rank
‧LOT No: Lot Number
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
DATASHEET
SMD B
12-23C/R6GHBHC-A01/2C
9
Copyright © 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0005517 Rev.9
www.everlight.com
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Label Desiccant Label
Aluminum moisture-proof bag
DATASHEET
SMD B
12-23C/R6GHBHC-A01/2C
10
Copyright © 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0005517 Rev.9
www.everlight.com
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages. .
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
Pre-heating
150~200°C
60~120sec.
Above 217°C
60~150sec.
260°C Max.
10sec. Max.
6°C/sec.Max.
Above255°C
30sec.Max.
3°C/sec.Max.
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the
soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because
the damage of the product is often started at the time of the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering
iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will
not be damaged by repairing.
DATASHEET
SMD B
12-23C/R6GHBHC-A01/2C
11
Copyright © 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0005517 Rev.9
www.everlight.com
Application Restrictions
High reliability applications such as military/aerospace, automotive safety/security systems,
and medical equipment may require different product. If you have any concerns, please contact
Everlight before using this product in your application. This specification guarantees the quality
and performance of the product as an individual component. Do not use this product beyond the
specification described in this document.
DATASHEET
SMD B
12-23C/R6GHBHC-A01/2C
12
Copyright © 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0005517 Rev.9
www.everlight.com
DISCLAIMER
1.EVERLIGHT reserves the right(s) on the adjustment of product material mix for the specification.
2.The product meets EVERLIGHT published specification for a period of twelve (12) months from date of shipment.
3.The graphs shown in this datasheet are representing typical data only and do not show guaranteed values.
4.When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these
specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from the use of the product which
does not comply with the absolute maximum ratings and the instructions included in these specification sheets.
5.These specification sheets include materials protected under copyright of EVERLIGHT. Reproduction in any form is
prohibited without obtaining EVERLIGHT’s prior consent.
6.This product is not intended to be used for military, aircraft, automotive, medical, life sustaining or life saving applications
or any other application which can result in human injury or death. Please contact authorized Everlight sales agent for
special application request.
