1
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
2mm PITCH METRIC CONNECTORS
FOR PCB CONNECTION
FCN-086 /087 SERIES
■OVERVIEW
Fujitsu’s 2mm hard metric connector F-PACK-3 (FCN-086/087 series) are connectors for connecting boards
developed to support high-speed transmission/high density packaging of communication equipment,
conforms to IEC 917 (DIN 43355) and IEC 61076-4-101, and supports compact PCI. Product meets Bellcor
1217. To support high-speed transmission, these connectors implement low inductance, low cross-talk, and
matching characteristic impedance (50 ohms), exhibiting superb transmission characteristics.
Connection with the PCB is solderless (press fit) for both the plug/socket side, making mounting cost
effective. Insertion connections are completely unnecessary since a polarity key is supported.
Plug contact has a four level sequence structure that makes connection/disconnection in an active state
possible. Terminals have a five level pin length to support various applications. New customized connectors
can be supported by freely combining the pin lengths of contacts and terminals.
For shield plate products, which support high-speed transmission based on standard products, 5 row 55,
95, 110, 110 (with key) and 125 contact, plugs support 77, 133, 154 and 175 contacts. The shield plate
corresponds to the respective number of contacts, and the standard is post attachment. Sockets can also
be shipped with shields pre-attached.
8 row products are also in the series. Consult factory for your requirements.
Fujitsu has developed a new high density power connector (25% denser) to improve operability.
A double press fit, which can connect two printed boards with one connector, greatly contributes to
improved mounting and decreasing cost. Consult factory for details.
2
FCN-086/ 087 Series
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
■ CONFIGURATION OF F&T 2 MM H.M. CONNECTOR
1. Basic configuration of socket/plug
There are five types of sockets: three basic types: type A (110 contacts), type B (125 contacts), and type C (55
contacts), and a 110 contact and 95 contact types. Many coding keys are in the series to prevent insertion errors.
■MATERIALS
Material
Item
Insulator
Conductor
Plating
Polyester resin (UL94V-0)
Copper alloy
Press fit: Solder
Press fit other: PAGOS
Contact area: Gold (PAGOS)
Lead / press fit area: Solder
■CHARACTERISTICS
Material
Item
Characteristic impedance
Transmission speed
Near end cross talk
50 ohms
300 MHz
4.3 % max.
■ SPECIFICATIONS
metI noitacificepS
rotcennocdradnatSrotcennocrewoP
egnarerutarepmetgnitarepOC˚521+otC˚55-C˚58+otC˚04-
gnitartnerruC)C˚57(.xamCDA1)C˚57(.xamtcatnoc/CDA7
gnitaregatloVs.m.rCAV005CDV65
ecnatsisertcatnoC)Am01,Vm02CD(.xamsmhom02)Am01,Vm02CD(.xamsmhom02
ecnatsisernoitalusnI)CDV001(.nimsmhoM000,01)CDV001(.nimsmhoM000,01
htgnertscirtceleiDetunim1rofCAV057etunim1rofCAV006
efillwardhtiW/noitresnIsemit521semit052
ecrofnoitresnI.nimnip/N57.0.xamrotcennoc/N02
ecroflwardhtiW.nimnip/N51.0.nimrotcennoc/N1
3
FCN-086 / 087 Series
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
The contact pins have a three-level sequence structure and can be connected/disconnected in an
active state. The terminal side can support various applications with four types of length. These
combinations allow 20 types of terminals.
Relationship between housing and terminals
Terminal types in the series
■ TERMINAL CONFIGURATION OF PLUG
PC Board Face
Contact Types
Contact length
Lead length
PWB Surface
Contact length
Lead length
PWB Surface
4
FCN-086/ 087 Series
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
Request Form for Customer Specific Pin Arrangement for 2mm Connectors
1. TYPE A (110 pos. with polarization key) (5+2)
2. TYPE B (125 pos.) (5+2)
3. TYPE C (55 pos.) (5+2)
4. 95 pos. (5+2)
11110987654321525242322212019181716
z
c
d
e
f
b
a
121413
11110987654321525242322212019181716
z
c
d
e
f
b
a
11110987654321519181716
z
c
d
e
f
b
a
121413
a
b
c
d
e
f
1111098765432
z
Part of the benefit of using the FCN-086 2mm Backplane connector is the flexibility of creating unique contact
loads in the connector body. To define your needs, make a photocopy of the following page(s), select your
connector needs, and fill in the blanks with the specific contact designation (see page 5 for available
contacts). Forward to Fujitsu for quotation and part number assignment. (Please note that the pin
arraignment drawings are "View from the Mating Side").
5
FCN-086 / 087 Series
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
■ TRANSMISSION CHARACTERISTICS
The transmission characteristics were designed to an optimum level by repeating various transmission
characteristics simulations when the structure was designed, so as to improve the transmission character-
istics of this connector. The characteristic impedance and the measurement device of the connector are
shown below.
Measurement Point Measurement Result
1.Measurement voltage: Vin = 5.0V
2.Rise time: Tr = 100ps, 300ps, 500ps, 1ns
3.Measurement device: TDR measurement device CSA803 and SD24 (Tektronix)
4.Measurement system
Delay Time
Characteristic
Impedance
PC board part PC board part PC board part
300.0m
10.00m
V/Div.
200.0m49.00n100.0p S/Div50.00n
inout
signal
a
b
c
d
e
Not connected
Ground
Measurement signal
CSA 80.3
SD 24
Coaxial cable for measurement
Plug
Measurement board
50 termination connector
Socket
stnenopmoCustijuF
tratStAsp001sp003sp005sn1
zH:ycneuqerFzHG57.1zHM085zHM053zHM571
)(ecnadepmIcitsiretcarahC0.46ot3.548.65ot2.846.45ot2.948.25ot3.94
%:klatssorcdneraF/raeN41.1/69.187.0/94.115.0/60.172.0/17.0
reilppuSrehtO
tratStAsp001sp003sp005sn1
zH:ycneuqerFzHG57.1zHM085zHM053zHM571
)(ecnadepmIcitsiretcarahC1.66ot4.748.65ot2.842.95ot5.945.35ot7.74
%:klatssorcdneraF/raeN14.1/42.289.0/75.176.0/41.153.0/87.0
Ω
Ω
Ω
FCN-086 / 087 Series Compact PCI / VME
6Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
■ STANDARD AND HOT SWAP PART NUMBERS
Coding Keys for Daughter Card Coding Keys for Midplane/Backplane
Backplane
P5
P4
P1
P2
P3
Male Pin
Headers
J5
J4
J1
J2
J3
160.0 (6.30)
3U =100.0
(3.937)
6U =223.35
(9.19)
Female
Receptacles
RJ5
RJ4
RJ2
RJ3
Female
Receptacles
Rear
I/O Card
Daughtercard
1
2
3
1
2
4
5
6
4
5
7
Standard
Hot Swap
1
2
3
1
Backplane
P5
P4
P1
P2
P3
Male Pin
Headers
J5
J4
J1
J2
J3
160.0 (6.30)
6U =223.35
(9.19)
Female
Receptacles
RJ5
RJ3
Female
Receptacles
Rear I/O Transition Card
Daughtercard
80.0 (3.15)
1
8
3
1
2
8
9
6
4
7
1
3
FCN-086B1278 - 3.3V
or
FCN-086B2348 - 5.0V J1 FCN-086A3456 - 3.3V
or
FCN-086A2348 - 5.0V P1
ecnerefeR rebmuN rebmuNtraPsnoitangiseD
1RCB-A111G-011J680-NCF ,5JR,2J,5J
2JR
2RCB-111G-011J680-NCF4JR,1J,4J
3RCB-A111G-590J680-NCF3JR,3J
4RCB-A111/G-451P680-NCF2P,5P
5RCB-401/G-451P680-NCF1P,4P
6RCB-A111/G-331P680-NCF3P
7RCB-411/G-451P680-NCF1P
8stcudorPerutuF5P,4J
9RCB-615/G-451P680-NCF4P
■ COMPUTER TELEPHONY PART NUMBERS
Coding Keys for Daughter Card
FCN-086B1278 - 3.3V
or
FCN-086B2348 - 5.0V J1
FCN-086B3567 - J4
Coding Keys for Midplane/
Backplane
FCN-086B1248 - P4
FCN-086A3456 - 3.3V
or
FCN-086A2348 - 5.0V P1
FCN-086 /087 Series Compact PCI / VME
7
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
Unit: mm (in.)
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)
Drill hole Diameter: φ0.7±0.025 mm (.028 in.)
Through hole diameter (after plating):
φ0.6±0.05 mm (.024)
■ DIMENSIONS
STRAIGHT PLUG (133 POSITIONS) ■ MOUNTING HOLE LAYOUT
Unit: mm (in.)
■ ORDERING PART NUMBER: FCN-086P133-G/111A-BCR
P3 TYPE 3
■ ORDERING PART NUMBER: FCN-086P133-G/502A-BCR
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)
Drill hole Diameter: φ0.7±0.025 mm (.028 in.)
Through hole diameter (after plating):
φ0.6±0.05 mm (.024)
Unit: mm (in.)
3.7
(0.146)
3.7
(0.146)
9.7
+0.2
0
(0.382
+0.008
)
0
11.2
+0.2
0
(0.440
+0.008
)
0
2x(7-1)=12
(0.472)
2
(0.079)2
(0.079)
2x(7-1)=12
(0.472)
2
(0.079)
2x(19-1)=36 (1.417)
13.45 (0.530)
3
0
-0.1
(0.118
0
)
-0.004
2±0.5
(0.079±0.002)
2±0.5
(0.079±0.002)
2x(7-1)=12±0.5
(0.472±0.002)
133 - Ø0.6±0.05
(0.024±0.002)
2x(19-1)=36±0.1 (1.417±0.004)
■ DIMENSIONS
STRAIGHT PLUG (133 POSITIONS) ■ MOUNTING HOLE LAYOUT
8.2+0.2
0
(0.039+0.008)
3.7
(0.146)
11.2+0.2
0
(0.440+0.008)
0
2x(7-1)=12
(0.472)
2
(0.079)
2
(0.079)
2x(7-1)=12
(0.472)
3 0
-0.1
(0.1180 )
-0.004
2
(0.079) 2x(19-1)=36 (1.417)
13.45 (0.530)
11.2+0.2
0
(0.440+0.008)
0
16 (0.630)
16 (0.630)
Unit: mm (in.)
2x(19-1)=36 ±0.1 (1.417±0.004)
2±0.5
(0.079±0.002)
2x(7-1)=12±0.5
(0.472±0.002)
133 - Ø0.6±0.05
(0.024±0.002)
2±0.5 (0.079±0.002)
P3 TYPE B MALE FEED THROUGH
FCN-086 / 087 Series Compact PCI / VME
8Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
Unit: mm (in.)
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)
Drill hole Diameter: φ0.7±0.025 mm (.028 in.)
Through hole diameter (after plating):
φ0.6±0.05 mm (.024)
■ DIMENSIONS
STRAIGHT PLUG (154 POSITIONS) ■ MOUNTING HOLE LAYOUT
Unit: mm (in.)
■ ORDERING PART NUMBER: FCN-086P154-G/104-BCR
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)
Drill hole Diameter: φ0.7±0.025 mm (.028 in.)
Through hole diameter (after plating):
φ0.6±0.05 mm (.024)
Unit: mm (in.)
■ DIMENSIONS
STRAIGHT PLUG (154 POSITIONS) ■ MOUNTING HOLE LAYOUT
Unit: mm (in.)
8.2
+0.2
0
3.7
(0.146)
2x(7-1)=12
(0.472)
2
(0.079)
2 (0.079)
2x(7-1)=12
(0.472)
3
0
-0.1
(0.118
0
)
-0.004
11.2
+0.2
0
(0.440
+0.008
)
0
3.7
(0.146)
3.7
(0.146)
9.7
+0.2
0
(0.039
+0.008
)
(0.382
+0.008
)
2 (0.079)2x(11-1)=20 (0.787)
2x(11-1)=20 (0.787)
24 (0.945)
48 (1.890)
13.45 (0.530)
2x(11-1)=20±0.5
(0.787±0.002) 2x(11-1)=20±0.5
(0.787±0.002)
8±0.5
(0.315±0.002)
4±0.5
(0.157±0.002)
2±0.5
(0.079±0.002)
2±0.5
(0.079±0.002)
2x(7-1)=12±0.5
(0.472±0.002)
Ø2 +0.1
0
Ø(0.079
0.004
)
0
154 - Ø0.6±0.05
(0.024±0.002)
■ ORDERING PART NUMBER: FCN-086P154-G/111A-BCR
3.7
(0.146)
3.7
(0.146)
9.7
+0.2
0
(0.382
+0.008
)
0
11.2
+0.2
0
(0.440
+0.008
)
0
2x(7-1)=12
(0.472)
2
(0.079)
2 (0.079)
2x(7-1)=12
(0.472)
3
0
-0.1
-0.004
(0.118
0
)
2
(0.079)2x(22-1)=42(1.654)
13.45 (0.530)
2x(22-1)=42±0.1 (01.654±0.004)
2±0.5
(0.079±0.002)
2±0.5
(0.079±0.002)
2x(7-1)=12±0.5
(0.472±0.002)
154 - Ø0.6±0.05
(0.024±0.002)
P1/P4 TYPE A
P2/P5 TYPE B
FCN-086 /087 Series Compact PCI / VME
9
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
Unit: mm (in.)
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)
Drill hole Diameter: φ0.7±0.025 mm (.028 in.)
Through hole diameter (after plating):
φ0.6±0.05 mm (.024)
■ DIMENSIONS ■ MOUNTING HOLE LAYOUT
Unit: mm (in.)
■ ORDERING PART NUMBER: FCN-086P154-G/114-BCR
P1 TYPE A HOT SWAP 110 SIGNAL CONNECTOR
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)
Drill hole Diameter: φ0.7±0.025 mm (.028 in.)
Through hole diameter (after plating):
φ0.6±0.05 mm (.024)
Unit: mm (in.)
■ DIMENSIONS ■ MOUNTING HOLE LAYOUT
Unit: mm (in.)
8.2+0.2
03.7
(0.146)
2x(7-1)=12
(0.472)
2
(0.079)
2 (0.079)
2x(7-1)=12
(0.472)
3 0
-0.1
(0.1180 )
11.2+0.2
0
(0.440+0.008)
0
3.7
(0.146)
3.7
(0.146)
9.7+0.2
0
(0.039+0.008)
(0.382+0.008)
2 (0.079)2x(11-1)=20 (0.787)
2x(11-1)=20 (0.787)
24 (0.945)
48 (1.890)
13.45 (0.530)
-0.004
2x(11-1)=20±0.5
(0.787±0.002) 2x(11-1)=20±0.5
(0.787±0.002)
8±0.5
(0.315±0.002)
4±0.5
(0.157±0.002)
2±0.5
(0.079±0.002)
2±0.5
(0.079±0.002)
2x(7-1)=12±0.5
(0.472±0.002)
Ø2
+0.1
Ø(0.079
0.004
)
0
154 - Ø0.6±0.05
(0.024±0.002)
0
■ ORDERING PART NUMBER: FCN-086P154G/401-BCR
P4 TYPE A MALE FEED THROUGH
2x(11-1)=20±0.5
(0.787±0.002) 2x(11-1)=20±0.5
(0.787±0.002)
8±0.5
(0.315±0.002) 4±0.5
(0.157±0.002)
2±0.5
(0.079±0.002)
2±0.5
(0.079±0.002)
2x(7-1)=12±0.5
(0.472±0.002)
Ø2
+0.1
Ø(0.079
0.004
)
0
154 - Ø0.6±0.05
(0.024±0.002)
0
2x(7-1)=12
(0.472)
2
(0.079)
-0.004
11.2
+0.2
0
(0.440
+0.008
)
0
(0.039
+0.008
)
2 (0.079)2x(11-1)=20 (0.787)
2x(11-1)=20 (0.787)
24 (0.945)
48 (1.890)
13.45 (0.530)
8.2
+0.2
0
2 (0.079)
2x(7-1)=12
(0.472)
3
0
-0.1
(0.118
0
)
16 (0.630)
16 (0.630)
STRAIGHT PLUG (154 POSITIONS)
STRAIGHT PLUG (154 POSITIONS)
FCN-086 / 087 Series Compact PCI / VME
10 Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
Unit: mm (in.)
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)
Drill hole Diameter: φ0.7±0.025 mm (.028 in.)
Through hole diameter (after plating):
φ0.6±0.05 mm (.024)
■ DIMENSIONS ■ MOUNTING HOLE LAYOUT
Unit: mm (in.)
■ ORDERING PART NUMBER: FCN-086P154-G/401A-BCR
TYPE 2 FEED THROUGH
■ ORDERING PART NUMBER: FCN-086P154-G/502A-BCR
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)
Drill hole Diameter: φ0.7±0.025 mm (.028 in.)
Through hole diameter (after plating):
φ0.6±0.05 mm (.024)
Unit: mm (in.)
■ DIMENSIONS
■ MOUNTING HOLE LAYOUT
Unit: mm (in.)
8.2+0.2
0
(0.039+0.008)
016 (0.630)
3.7
(0.146)
11.2+0.2
0
(0.440+0.008)
0
2x(7-1)=12
(0.472)
2
(0.079)
2 (0.079)
2x(7-1)=12
(0.472)
3 0
-0.1
(0.1180 )
-0.004
2
(0.079) 2x(22-1)=42 (1.654)
13.45 (0.530)
11.2+0.2
0
(0.440+0.008)
016 (0.630)
2x(22-1)=42±0.1 (1.654±0.004)
2±0.5
(0.079±0.002)
2±0.5
(0.079±0.002)
2x(7-1)=12±0.5
(0.472±0.002)
154 - Ø0.6±0.05
(0.024±0.002)
2x(7-1)=12
(0.472)
2
(0.079)
11.2+0.2
0
(0.440+0.008)
0
(0.039+0.008)
2 (0.079)
13.45 (0.530)
8.2+0.2
0
2 (0.079)
2x(7-1)=12
(0.472)
16 (0.630)
16 (0.630)
-0.1
3 0
(0.1180 )
-0.004
2x(22-1)=42 (1.654)
2x(22-1)=42±0.1
(1.654±0.004)
2±0.5 (0.079±0.002)
2±0.5
(0.079±0.002)
2x(7-1)=12±0.5
(0.472±0.002)
154 - Ø0.6±0.05
(0.024±0.002)
STRAIGHT PLUG (154 POSITIONS)
STRAIGHT PLUG (154 POSITIONS)
TYPE 2 FEED THROUGH
FCN-086 /087 Series Compact PCI / VME
11
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
Unit: mm (in.)
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)
Drill hole Diameter: φ0.7±0.025 mm (.028 in.)
Through hole diameter (after plating):
φ0.6±0.05 mm (.024)
■ DIMENSIONS ■ MOUNTING HOLE LAYOUT
Unit: mm (in.)
■ ORDERING PART NUMBER: FCN-086P154-G/503A-BCR
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)
Drill hole Diameter: φ0.7±0.025 mm (.028 in.)
Through hole diameter (after plating):
φ0.6±0.05 mm (.024)
Unit: mm (in.)
■ DIMENSIONS ■ MOUNTING HOLE LAYOUT
Unit: mm (in.)
8.2
+0.2
0
(0.039
+0.008
)
0
3.7
(0.146)
11.2
+0.2
0
(0.440
+0.008
)
0
2x(7-1)=12
(0.472)
2 (0.079)
2x(7-1)=12
(0.472)
3
0
-0.1
(0.118
0
)
-0.004
2
(0.079)
13.45 (0.530)
11.2
+0.2
0
(0.440
+0.008
)
0
16 (0.630)
16 (0.630)
2 (0.079)
2x(22-1)=42 (1.654)
2±0.5
(0.079±0.002)
2±0.5
(0.079±0.002)
2x(7-1)=12±0.5
(0.472±0.002)
154 - Ø0.6±0.05
(0.024±0.002)
2x(22-1)=42±0.1 (1.654±0.004)
■ ORDERING PART NUMBER: FCN-086P154-G/516-BCR
P4 TYPE A COMPUTER TELEPHONY CONNECTOR
2x(7-1)=12
(0.472)
2
(0.079)
11.2
+0.2
0
(0.440
+0.008
)
0
(0.039
+0.008
)
2 (0.079)2x(11-1)=20 (0.787)
2x(11-1)=20 (0.787)
24 (0.945)
48 (1.890)
13.45 (0.530)
8.2
+0.2
0
2 (0.079)
2x(7-1)=12
(0.472)
3.7
(0.146)
3.7
(0.146)
3.7
(0.146)
9.7
+0.2
0
(0.382
+0.008
)
0
0
-0.004
3
0
(0.118
0
)
-0.1
2x(11-1)=20±0.5
(0.787±0.002) 2x(11-1)=20±0.5
(0.787±0.002)
8±0.5
(0.315±0.002) 4±0.5
(0.157±0.002)
2±0.5
(0.079±0.002)
Ø2
+0.1
Ø(0.079
0.004
)
0
154 - Ø0.6±0.05
(0.024±0.002)
0
2±0.5
(0.079±0.002)
2x(7-1)=12±0.5
(0.472±0.002)
STRAIGHT PLUG (154 POSITIONS)
STRAIGHT PLUG (154 POSITIONS)
P5 TYPE B FEED THRU COMPUTER TELEPHONY CONNECTOR
12
FCN-086/ 087 Series
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
FCN-086J055-G/LSD-BCR (bottom shield
plate)
Unit: mm (in.)
Thickness: 1.4 to 2.0 mm (.055 to .220 in.)
Drill hole Diameter: φ0.7±0.025 mm (.028 in.)
Through hole diameter (after plating): φ0.6±0.05
mm (.024)
SOCKET: 55 CONTACTS
■ MOUNTING HOLE LAYOUT
■ ORDERING PART NUMBER: FCN-086J055-G/101-BCR
■ DIMENSIONS
SHIELD PLATE
■ DIMENSIONS ■ DIMENSIONS
FCN-086J055-G/USD-BCR (top shield plate)
Unit: mm (in.)
Unit: mm (in.) Unit: mm (in.)
FCN-086J055-G/111-BCR (with pre-attached upper shield)
■ ORDERING PART NUMBER: ■ ORDERING PART NUMBER:
2 x (6-1) = 10±0.05
(0.394±0.002)
55-φ0.6±0.05
(.024±0.002)
2±0.05 (.079±0.002)
2x (11-1)=20±0.05
(0.787±0.002)
2±0.05 (.079±0.002)
1.5±0.05 (.0.060±0.002)
90˚
0.4
0
-0.1
(0.016
0
)
-0.004
1±0.1 (0.139±0.004)
(16.2) [0.638]
0.4±0.05
(0.016±0.002)
10.85
(0.427)
4 x (6-1)=20 (0.787)
6.7
(0.264)
21.7±0.2 (0.854±0.008)
4±0.2
(0.157±0.008)
15 (0.591)
4.5 MAX.
(0.177)
5.35±0.1
(0.211±0.004)
2 x (11-1)=20 (0.787)
0.7±0.1
(0.0281±0.004)
2±0.1(0.079±0.004)
2±.1
(.079±.004)
21.15 MAX.
(0.833)
3.45±0.2
(.0136±0.008)
1
(0.039)
90˚
0.4
0
-0.1
(0.016
0
)
-0.004
1±0.1 (0.139±0.004)
(16.2) [0.638]
0.4±0.05
(0.016±0.002)
1.35
(0.053)
4 x (5-1)=16 (0.630)
5.51
(0.217)
21.7±0.2 (0.854±0.008)
4±0.2
(0.157±0.008)
15 (0.591)
4.5 MAX.
(0.177)
5.35±0.1
(0.211±0.004)
2 x (11-1)=20 (0.787)
0.7±0.1
(0.0281±0.004)
2±0.1(0.079±0.004)
2±.1
(.079±.004)
21.15 MAX.
(0.833)
3.45±0.2
(.0136±0.008)
1
(0.039)
2 x (11-1) = 20 (.787)
2 (.079)
2 x (11-1) = 20 (.787)
2 (.079)
10.8 (0.425)
9.2 (0.362)
25 (.984)
Section A-A
2 x (5-1) = 8 (.315)
2
(.079)
11.4 (0.449)
2
(.079)2
(.079)
20.2 (0.795)
2
(.079)
2.35
(.093)
0.3
(0.012)
10.95 (0.431) 3.7
(0.146)
3.4
(0.134)
2 x (5-1) = 8
(.315)
b
d
e
a
13
FCN-086 / 087 Series
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
FCN-086J095-G/MSD-BCR (bottom shield plate)
Thickness: 1.4 to 2.0 mm (.055 to .220 in.)
Drill hole Diameter: φ0.7±0.025 mm (.028 in.)
Through hole diameter (after plating): φ0.6±0.05
mm (.024)
SOCKET: 95 CONTACTS
■ MOUNTING HOLE LAYOUT
■ ORDERING PART NUMBER: FCN-086J095-G/101A-BCR
■ DIMENSIONS
SHIELD PLATE
■ DIMENSIONS ■ DIMENSIONS
FCN-086J095-G/VSD-BCR (top shield plate)
Unit: mm (in.)
Unit: mm (in.)
■ ORDERING PART NUMBER: ■ ORDERING PART NUMBER:
FCN-086J095-G/111A-BCR (with pre-attached upper shield)
2 x (6-1) = 10±0.05
(0.394±0.002)
114-ø0.6±0.05
(.024±0.002)
2±0.05 (.079±0.002)
2x (19-1)=36±0.05
(1.417±0.002)
2±0.05
(.079±0.002)
1.5±0.05
(.0.060±0.002)
Unit: mm (in.)
0.4
0
-0.1
(0.016
0
)
-0.004
1.35(0.053)
4 x (9-1)=32 (1.260)
5.51
(0.217)
4±0.2
(0.157±0.008)
4.5 MAX.
(0.177)
5.35±0.1
(0.211±0.004)
2 x (19-1)=36(1.417)
2±.1
(.079±.004)
37.15 MAX. (1.463)
15 (0.591)
37.7±0.2 (1.484±0.008)
90˚
1±0.1 (0.139±0.004)
(16.2) [0.638]
0.4±0.05
(0.016±0.002)
0.7±0.1(0.0281±0.004)
2±0.1(0.079±0.004)
1
(0.039)
3.45±0.2
(0.158±0.008)
2 x (19-1) = 36 (1.417)
2 (.079)
2 x (19-1) = 36 (1.417)
2 (.079)
10.8 (0.425)
38 (1.470)
Section A-A
2 x (5-1) = 8 (.315)
2
(.079)
2
(.079)
20.2 (0.795)
2
(.079)
2.35
(.093)
0.3
(0.012)
10.95 (0.431) 3.7
(0.146)
3.4
(0.134)
2 x (5-1) = 8
(.315)
A
A
2
(.079)
11.4 (0.449)
b
d
e
a
(9.2)[0.362]
Unit: mm (in.)
90
˚
(0.0160 )
-0.004
0.7±0.1(0.0281±0.004)
0.40
-0.1
1±0.1 (0.139±0.004)
(16.2) [0.638]
0.4
±
0.05
±0.002)
10.85
(0.427)
4 x (10-1)=36 (1.417)
6.7
(0.264)
4±0.2
(0.157±0.008)
15 (0.591)
4.5 MAX.
(0.177)
5.35±0.1
(0.211±0.004)
2 x (19-1)=36(1.417)
2±0.1(0.079±0.004)
2±.1
(.079±.004)
37.15 MAX. (1.463)
1
(0.039)
14
FCN-086/ 087 Series
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
Unit: mm (in.)
Unit: mm (in.)
Thickness: 1.4 to 2.0 mm (.055 to .220 in.)
Drill hole Diameter: φ0.7±0.025 mm (.028 in.)
Through hole diameter (after plating): φ0.6±0.05 mm
(.024)
SOCKET: 110 CONTACTS
■ MOUNTING HOLE LAYOUT
■ ORDERING PART NUMBER: FCN-086J110-G/101-BCR
■ DIMENSIONS
SHIELD PLATE
■ DIMENSIONS ■ DIMENSIONS
FCN-086J110-G/USD-BCR (with key, top
shield plate) FCN-086J110-G/LSD-BCR (with key,
bottom, shield plate)
Unit: mm (in.)
Unit: mm (in.)
■ ORDERING PART NUMBER: ■ ORDERING PART NUMBER:
FCN-086J110-G/111-BCR (with pre-attached upper shield)
2 x (6-1) = 10±0.05
(0.394±0.002)
135-ø0.6±0.05
(.024±0.002)
2±0.05 (.079±0.002)
2x (25-1)=48±0.05
(1.890±0.002)
2±0.05 (.079±0.002)
1.5±0.05
(.0.060±0.002)
0.4
0
-0.1
(0.016
0
)
-0.004
10.85
(0.427)
4 x (13-1)=48 (1.890)
6.7
(0.264)
49.7±0.2 (1.957±0.008)
4±0.2
(0.157±0.008)
15 (0.591)
4.5 MAX. (0.177)
5.35±0.1
(0.211±0.004)
6.35±0.15
(0.25±0.006)
2 x (11-1)=20 (0.787)2 x (11-1)=20
(0.787)
2±.1
(.079±.004)
49.15 MAX.
(1.935)
1±0.1 (0.139±0.004)
0.7±0.1
(0.0281±0.004)
2±0.1(0.079±0.004)
3.45±0.2
(0.158±0.008)
90˚
(16.2) [0.638]
0.4±0.05
(0.016±0.002)
1
(0.039)
3.45±0.2
90˚
(0.016
0
)
-0.004
1 (0.139)
(162) [6.378]
0.4±0.05
(0.016±0.002)
1.35(0.053)
4 x (12-1)=44 (1.732)
5.51
(0.217)
4±0.2
(0.157±0.008)
15 (0.591)
4.5 MAX.(0.177)
5.35±0.1
(0.211±0.004)
6.35±0.15
(0.25±0.006)
2 x (11-1)=20 (0.787)2 x (11-1)=20
(0.787)
0.7±0.1
(0.0281±0.004)
2±.1(.079±.004)
2±.1
(.079±.004)
49.15 MAX.
(1.935)
0.4
0
-0.1
49.7±0.2 (1.957±0.008)
1±.1(.039±.004)
2 x (11-1) = 20 (0.898) 2 (.079)
10.8 (0.425)
Section A-A
2 x (5-1) = 8 (.315)
2
(.079)
2
(.079)
20.2 (0.795)
2
(.079)
2.35
(.093)
0.3
(0.012)
10.95 (0.431) 3.7
(0.146)
3.4
(0.134)
2 x (5-1) = 8
(.315)
2
(.079)
(9.2)[0.362]
11.4 (0.449)
b
d
e
a
2 x (11-1) = 20 (0.898)
2 (.079)
48 (1.890)
2 x (11-1) = 20 (0.898) 2 (.079)
2 x (11-1) = 20 (0.898)
2 (.079)
48 (1.890)
50 (1.969)
15
FCN-086 / 087 Series
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
Unit: mm (in.)
Thickness: 1.4 to 2.0 mm (.055 to .220 in.)
Drill hole Diameter: φ0.7±0.025 mm (.028 in.)
Through hole diameter (after plating): φ0.6±0.05
mm (.024)
SOCKET: 110 CONTACTS WITHOUT KEY
■ ORDERING PART NUMBER: FCN-086J110-G/101A-BCR
■ DIMENSIONS
■ DIMENSIONS
bottom shield plate)
FCN-086J110-G/MSD-BCR (without key,
SHIELD PLATE
■ DIMENSIONS
FCN-086J110-G/VSD-BCR (without key, top
shield plate)
Unit: mm (in.)
Unit: mm (in.)
■ ORDERING PART NUMBER: ■ ORDERING PART NUMBER:
■ MOUNTING HOLE LAYOUT
FCN-086J110-G/111A-BCR (with pre-attached upper shield)
2 x (6-1) = 10±0.05
(0.394±0.002)
132-ø0.6±0.05
(.024±0.002)
2±0.05 (.079±0.002)
2x (22-1)=36±0.05
(1.654±0.002)
2±0.05
(.079±0.002)
1.5±0.05
(.0.060±0.002)
Unit: mm (in.)
90˚
0.4
0
-0.1
(0.016
0
)
-0.004
1±0.1 (0.139±0.004)
(16.2) [0.638]
0.4±0.05
(0.016±0.002)
10.85
(0.427)
4 x (11-1)=40 (1.575)
6.7
(0.264)
4±0.2
(0.157±0.008)
15 (0.591)
4.5 MAX.
(0.177)
5.35±0.1
(0.211±0.004)
2 x (22-1)=42(1.654)
0.7±0.1
(0.0281±0.004)
2±0.1(0.079±0.004)
2±.1
(.079±.004)
43.15 MAX.
(1.699)
1
(0.039)
43.7±0.2 (1.720±0.008)
3.45±0.2
(0.158±0.008)
2 x (22-1) = 42 (1.654) 2 (.079)
2 (.079)
10.8 (0.425)
44 (1.732)
Section A-A
2 x (5-1) = 8 (.315)
2
(.079)
2
(.079)
20.2 (0.795)
2
(.079)
2.35
(.093)
0.3
(0.012)
10.95 (0.431) 3.7
(0.146)
3.4
(0.134)
2 x (5-1) = 8
(.315)
2
(.079)
11.4 (0.449)
b
d
e
a
(9.2)[0.362]
2 x (22-1) = 42 (1.654)
90˚
0.4
0
-0.1
(0.016
0
)
-0.004
1±0.1 (0.139±0.004)
(16.2) [0.638]
0.4±0.05
(0.016±0.002)
1.35(0.053)
4 x (11-1)=40 (1.575)
5.51
(0.217)
4±0.2
(0.157±0.008)
15 (0.591)
4.5 MAX.
(0.177)
5.35±0.1
(0.211±0.004)
2 x (22-1)=42(1.654)
0.7±0.1(0.0281±0.004)
2±0.1(0.079±0.004)
2±.1
(.079±.004)
43.15 MAX. (1.699)
1
(0.039)
43.7±0.2 (1.720±0.008)
3.45±0.2
(0.158±0.008)
16
FCN-086/ 087 Series
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
Unit: mm (in.)
Thickness: 1.4 to 2.0 mm (.055 to .220 in.)
Drill hole Diameter: φ0.7±0.025 mm (.028 in.)
Through hole diameter (after plating):
φ0.6±0.05 mm (.024)
SOCKET: 125 CONTACTS
■ MOUNTING HOLE LAYOUT
■ ORDERING PART NUMBER: FCN-086J125-G/101-BCR
■ DIMENSIONS
■ DIMENSIONS
FCN-086J125-G/LSD-BCR (bottom shield plate)
SHIELD PLATE
■ DIMENSIONS
FCN-086J125-G/USD-BCR (top shield plate)
■ ORDERING PART NUMBER: ■ ORDERING PART NUMBER:
Unit: mm (in.)
Unit: mm (in.)
FCN-086J125-G/111-BCR (with pre-attached upper shield)
2 x (6-1) = 10±0.05
(0.394±0.002)
150-ø0.6±0.05
(.024±0.002)
2±0.05 (.079±0.002)
2x (25-1)=48±0.1
(1.890±0.004)
2±0.05
(.079±0.002)
1.5±0.05
(.0.060±0.002)
Unit: mm (in.)
90˚
0.4
0
-0.1
(0.016
0
)
-0.004
(16.2) [0.638]
0.4±0.05
(0.016±0.002)
1(0.039)
4 x (12-1)=44 (1.732)
1.35(0.053)
49.7±0.2 (1.957±0.008)
4±0.2
(0.157±0.008)
15 (0.591)
4.5 MAX.
(0.177)
5.35±0.1
(0.211±0.004)
2 x (25-1)=48(1.890)
2±.1
(.079±.004)
49.15 MAX.
(1.935)
5.51
(0.217)
1±0.1 (0.139±0.004)
0.7±0.1
(0.0281±0.004)
2±0.1(0.079±0.004)
3.45±0.2
(0.158±0.008)
90˚
0.4
0
-0.1
(0.016
0
)
-0.004
1±0.1 (0.139±0.004)
(16.2) [0.638]
0.4±0.05
(0.016±0.002)
10.85
(0.427)
4 x (13-1)=48 (1.890)
6.7
(0.264)
49.7±0.2 (1.957±0.008)
4±0.2
(0.157±0.008)
15 (0.591)
4.5 MAX.
(0.177)
5.35±0.1
(0.211±0.004)
2 x (25-1)=48(1.890)
0.7±0.1
(0.0281±0.004)
2±0.1(0.079±0.004)
2±.1
(.079±.004)
49.15 MAX.
(1.935)
1
(0.039)
3.45±0.2
(0.158±0.008)
2 x (25-1) = 42 (1.890) 2 (.079)
2 (.079)
50 (1.969)
2 x (25-1) = 48 (1.890)
10.8 (0.425)
Section A-A
2 x (5-1) = 8 (.315)
2
(.079)
2
(.079)
2
(.079)
2.35
(.093)
0.3
(0.012)
10.95 (0.431) 3.7
(0.146)
3.4
(0.134)
2 x (5-1) = 8
(.315)
2
(.079)
11.4 (0.449)
(9.2)[0.362]
20.2 (0.795)
b
d
e
a
17
FCN-086 / 087 Series
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
CODING KEY
■ DIMENSIONS
■ ORDERING PART NUMBER:
8.9 (0.350)
2.2
(0.087)
5.75
(0.226)
6.55
(0.258)
2.9
(0.114)7.9
(0.311)
3.15
(0.124)
2.35
(0.093)
6.1
(0.240)
9.2 (0.362)
2
(0.079)
3.8
(0.150) 6.75
(0.266)
■ ORDERING PART NUMBER:
FCN-086A3568 FCN-086B1247
■ DIMENSIONS
Quanties: 50 pieces/package; minium order quanity: 500 piecs
■ ORDERING PART NUMBERs:
Plug Coding Key: FCN-086A**** ****: Add Coding Key number: eg: FCN-086A1268
Jack Coding Key: FCN-086B****
■ COMBINATION OF CODING KEYS
Plug
1236
1248
1238
1567
1268
Color
Jack
Nut brown
Strawberry
Brilliant blue
Olive yellow
Ultramarine
blue
red
4578
3567
4567
2348
3457
Plug
2578
3567
3467
3568
1346
1248
1258
1247
Color
Jack
Reseda green
Antique pink
Pastel orange
Slate gray
18
FCN-086/ 087 Series
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
© 2002 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks
of their respective owners. Rev. 06/2002
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: marcom@fcai.fujitsu.com
Web: www.fcai.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Web: www.fceu.fujitsu.com
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
www.fcal.fujitsu.com
Fujitsu Components
International
Headquarter
Offices
