62GB-5067-10-06SB - AMPHENOL

62 GB

- Series Plugs

Miniature Bayonet Lock Connectors

Complies with MIL-C-26482

-2Pa

This miniature bayonet lock connector series offers designers

important features not found in any other range of connectors.

They are developed and manufactured entirely in the U.K.

by AMPHENOL Ltd., and have full qualification approval to

British Standards Specification BS 9522 F0017 and British

Defence Specification DEF STAN 59-35 (Part 3) Sec. 7.

Amphenol

This catalogue to be used in conjunction with Catalogues:

CE-2Ra – 62GB Series Receptacles

CE-2Aa – 62GB Series Accessories

62GB and

Pattern 608

New Planforms

Current:

(a) Maximum current per individual contact (in isolation)* at ambient

temperature of 85°C

Contact size 12: 23 A

(b) Maximum current per contact through all contacts simultaneously at

an ambient temperature of 85°C

Contact size 12: 20 A

Current:

(a) Maximum current per

individual contact (in

isolation)* at ambient

temperature of 85°C

Contact size 8: 45 A

(b) Maximum current per contact

through all contacts

simultaneously at an ambient

temperature of 85°C

Contact size 8: 40 A

Sea level 8500m (27,900ft) 21,340m (70,OOOft)

1013 mbar …320 mbar 44 mbar

Voltage rating I II III I II III I II III

Working voltages ** 700 1200 1500 550 650 800 330 380 450

(nominal)

d.c. or a.c. peak

Voltage proof 2100 3000 3000 1100 1300 1300 660 760 750

d.c. or a.c. peak

*i.e. when only one contact per connector is electrically loaded.

… 1 mbar=102 N/m2=100 Pa

** Establishment of electrical safety factors is the responsibility of the user

CONTENTS

Page

Amphenol 62GB Solder Connectors 4

Schedule of Tests 5-6

Connector Styles Available 7

Insert Availability 8

Ordering 62GB Series Connectors 10-11

Plugs - Table of Styles 12-13

Plugs 14-19

Insert Orientations 20

Key/Keyway Orientations 21

Amphenol ® 62GB

solder connectors

This miniature bayonet lock connector series offers

designers important features not found in any other range

of connectors. The range has full qualification approval to

British Standards Specification BS 9522 FOO 17 and British

Defence Specification DEF STAN 59-35 (Part 3) Sec. 7.

62GB Series connectors - developed and manufactured

entirely in the United Kingdom by Amphenol Limited. They

are the first and only British connectors to have achieved

this. A doubly strong position which Amphenol are well

geared to handle. The manufacturing facilities of the

Whitstable plant have been cited as exemplary in Europe.

Certainly the layout is extensive and extremely efficient;

safety awards have been attained every time returns have

been submitted to the British Safety Council.

62GB Series connectors have been well established with

Government authorities on an international scale and users

can be found in Sweden, Denmark, Norway, Finland,

Germany, Spain, Holland, India, Canada and Italy.

Derating

Connectors must be derated under the following

operating conditions:

1. At elevated ambient temperatures, the current ratings

are reduced so that total maximum hot spot

temperature of 125°C is not exceeded.

2. At high altitudes, revised voltage ratings become

effective as shown on page 7.

3. When connectors to different specifications are

intermated (e.g. BS 9522 FOO 17 and

MIL-C26482), the combination must not be

operated under conditions more severe than the

less stringent clause of either specification.

Amphenol 62GB connectors are designed to meet

the most stringent requirements of both

specifications.

Military Specifications

British Standards Specification BS 9522 FOO 17

closely corresponds to the United States Military

Specification MIL-C-26482 solder terminations.

Certain differences exist between the schedules which

can be seen on pages 2 and 3.

Approved gauges are used to check interchangeability

of 62GB series with other connectors manufactured to

BS 9522 FOO 17 or MIL-C-26482.

Basic Construction

Connector shells are machined from solid aluminium bar

stock - not forged or extruded as in competitive designs.

Machining has inherent advantages in terms of strength

and adaptability. 62GB Series can be supplied in brass or

stainless steel, for instance.

The normal shell finish used, which has a high resistance to

corrosion, is zinc cobalt olive drab. Other finishes may be

supplied to special order, such as cadmium plate which is

available by adding deviation (714) to the end of part

number.

Inserts are of polychloroprene rubber compounded to an

Amphenol specification. Operating temperature range is

-55°C to 125°C, and the connectors have gold-plated

contacts designed for soldered connections. Configurations

for size 20 contacts range between 2 contacts in the size 8

12.7mm (0.5in diameter) shell up to a maximum of 61

contacts in the size 2436.1 mm (1.5in diameter) shell.

Intermediate sizes, and contact data for heavier current

ratings are shown in the insert availability chart on page 6

and 7.

Hermetic connectors with glass sealed dialectric are

manufactured with mild steel shells and nickel iron

contacts plated tin over copper.

*Other finishes are available on request.

Protection Against Mis-Mating or Cross-Plugging

In BS 9522 FOO 17 positive shell-to-shell keying is

provided with keys and keyways in a choice of either the

normal (N) or any of the four preferred alternate

positions: B, C, E and F. This prevents mismating between

shells of different orientations and overcomes the

difficulties associated with rotated inserts and a standard

key-keyway orientation. In the latter system, damage to

the inserts or contacts can result if excessive force is used

to engage non-mating pairs.

Rotated inserts are, however, permissible in BS 9522 FOO

17 connectors if required to mate with or replace units to

MIL-C-26482 mounted in existing equipment. Connectors

have normal orientations manufactured to BS 9522 FOO 17

or MIL-C-26482 are fully intermateable as also are

connectors with inserts in positions W, X, Y or Z.

This catalogue to be used in conjunction with Catalogues:

CE-2Ra – 62GB Series Receptacles

CE-2Aa – 62GB Series Accessories

Schedule of Tests

Required for Qualification

Approval

Tests

Visual Examination

Dimensions, outline mass(including

contacts) Compatability Gauging

procedure

Polarization

Engaging and separating force, connector

Contact Holding Force

Sealing (air pressure)

Sealing Hermetic

Contact Resistance

Housing (Shell) Continuity

Insulation Resistance

Voltage Proof

Soldering

Bumping

Vibration

Shock

Acceleration (Steady State)

Rapid Change of Temperature

Climatic Sequence

Flammability

Damp Heat (Steady State)

Brief Description

Engagement max: 0,90 Nm (8.0 lbf.in.) to

4,97 Nm (44 lbf.in.) according to shell size.

Separation min: 0,22 Nm (2.0 lbf.in.) to 1,58

Nm (14.0 lbf.in.) according to shell size.

0,21 N (0.047 lbf) min.size 20

0,56 N (0.126 lbf)min. size 16

Max leakage 28,53 uNm/s (1 cm3/h), 1

bar (14.5 p.s.i.) differential.

Hermetic receptacles have a max leak of 0.1 micron

cubic foot per hour (1 x 10-6Cm3/s)

5 milliohms max.

200 milliohms max. 5 milliohms max.

grounding spring styles.

5,000 Megaohms at 500 - 50 V d.c.

See page 7. Duration 1 minute

As BS 9520: 1974, Clause 1.2.6.6,

Method 2.

As BS 9520: 1974, Clause 1.2.6.1. 4,000

-10 bumps / 390m / s2 (40 gn).

As BS 9520: 1974, Clause 1.2.6.2.1. Procedure A. 10 Hz

to 5000 Hz, 0.75 mm / 10 gn.

As BS 9520: 1974, Clause 1.2.6.3. 981

m/s2 (100 g n).

As BS 9520: 1974, Clause 1.2.6.4. 490

m/s2 (50 gn).

As BS 9520: 1974, Clause 1.2.6.7. -550

C to - 1250 C.

As BS 9520: 1974, Clause 1.2.6.11.

Severity 55/125/56.

As BS 9520: 1974, Clause 1.2.6.8. Direct

flame applied, duration 1 minute.

As BS 9520: 1974, Clause 1.2.6.14.

Severity 56 days.

Schedule of Tests

Required for Qualification

Approval

Tests Brief Description

Immersion (at low air pressure)

Mechanical Endurance

High Temperature Endurance

Mould Growth

Salt Mist

Dust

Robustness of Terminations

Contact Retention (in insert)

Insert Retention (in shell)

Test Prod Damage

Impact

Grounding Spring Holding Force Plugs

with grounding springs only.

Fluid Resistance

Compass Safe Distance

3 cycles at 30 mins each cycle, total immersion in

water at pressure 44 m bar.

500 operations minimum

Long term: 1,000 hrs. at 850 C ambient carrying the

specified current. Short term: 250 hrs at 1250 C, no

current.

As BS 9520: 1974, Clause 1.2.6.15. 28

days duration.

As BS 9520: 1974, Clause 1.2.6.16.

Severity 1.

As BS 9520: 1974, Clause 1.2.6.17

Exposure 30 minutes.

44,5 N (101bf) size 16

22,2 N (5 lbf) size 20

67,0 N (15 lbf) min. size 20

112,0 N (25 lbf) min. size 16

517 KN1m2 (751bf/in2) min.

Moment: 0,056 Nm (0.5 lbf in) size 20

0,225 Nm (2 lbf in) size 16

Five impacts, drop height 1 m (3ft.3 in.).

1,17 N (0.263 lbf) to 2,74 N (0.616 lbf)

according to size.

Immersion in 4 solvents and 9 fluids

including aircraft fuels, lubricating oils and

hydraulic fluids.

As BS 9520: 1974, Clause 1.2.5.11. 127

mm (5.0 in) min.

Connector Styles

Available

Plugs

Straight Plug

See Pages 14-17

Grounded Plug

See Page 14

Accessories

See Catalogue CE-2Aa

Audio Plug

See Page 18

Push on

- Pul

l off

See Page 19

Insert Availability

NOTES

*This insert arrangement is not included in B.S.

spec., but is available and. listed in MIL-C-26482.

…Due to the arrangement of contacts in the

14-12 insert arrangement it is classified, for

current derating, in the shell size range 18-24.

Lettering of inserts shown above corresponds to view of front

(mating surface of pin inserts or rear face (cable accessory

end) of socket inserts.

KEY • No 16 size contacts

O No 20 size contacts

CURRENT RATING

Maximum current per individual contact (in isolation) at a

maximum ambient temperature of 85°C: Size 20 contact 7.5A

Size 16 contact 13-OA The performance of 62GB Series

connectors at all times exceeds the maximum continuous

bunched rating of the appropriate size wire, or cable of

equivalent temperature rating. This bunched rating is therefore

the determining factor. In the case of mixed loadings, the

greatest individual load shall be the bunched loading. In any

combination of ambient temperature plus temperature rise due

to current flow through the contacts, the maximum connector

internal hot spot temperature of 125°C must not be exceeded.

That is, when only one contact per connector is loaded.

Insert Availability

VOLTAGE RATINGS

ALTITUDE

-THOUSANDS OF

FEET (METRES)

Relationship between flashover voltage and

altitude for each voltage rating

VOLTAGE RATINGS

Two categories of voltage rating are specified in

BS9522 F0017, F0038 and N0001.

Rating 1 (700V d.c. working at sea-level) Applicable to the

high contact density inserts shown in the upper section of the

insert availability diagram above.

Rating 2 (1200V d.c. working at sea-level) Applicable to

the inserts shown in the lower section of the insert

availability diagram.

Altitude derating. Information on voltage derating for

operation at altitudes above sea-level can be obtained from

the flashover voltage altitude curves on the left.

-55

D.C.

WORKING

VOLTAGE

A.C.

WORKING

VOLTAGE

R.M.S.

PROOF

VOLTAGE

D.C. OR A.C.

PEAK

Rating 1

Sea level

300

mb at

20°C

8,500m

(27,800 ft)

mb at

20°C

20,000m

(66,000 ft)

Rating 2

Sea level

300 mb at

20°C

8,500m

(27,800 ft)

44 mb at

20"C

20,000m

(66,000 ft)

700

550

330

120

650

380

500

390

230

850

460

270

2100

1100

660

3000

1300

760

ALTITUDE

-61

Ordering

62GB Series

Connectors

To obtain the specific connector required write down the connector number from the

typical example below. Only inserts shown in the availability chart on p. 10&11 can be

specified. All connectors are delivered with protective dust covers

62GB

SHELL STYLE

Environmental code

A -Plain shell, exposed

solder buckets. No

grommet

E - Insert seal and grommet seal

with grommet nut (excluding

12E which has plain shell and

no grommet or nut)

F -As (E) but grommet nut

has integral strain relief

clamp

H -Hermetic seal no cable

accessories

J -As (E) but with resilient gland

seal and nut for unscreened

jacketed cable. No grommet

supplied. See pp. 26-27 for

accessory to accept

screened jacketed cable.

P -Potting construction

complete with potting

mould

T -Exposed solder buckets.

Threaded shell for cable

accessories

Shell style

0 -Receptacle wall mounting

1 -Receptacle cable

mounting

2 -Receptacle box mounting

3 -Receptacle, solder flange

mounting

4 -Receptacle, internally

threaded with cable

accessories as illustrated, for

single hole mounting

6 -Plug cable mounting

7-Receptacle, plain shell,

single hole mounting

Specification key

1 -Styles originally specified in

MIL-C-26482

5 -Styles exclusive to

BS9522 F0017

Series designation

62 GB - Aluminium shell

62 GB SS -Stainless steel shell*

62 GB CU - Brass shell*

*consult factory for availability

62GB-XXH-Hermetic mild

steel shell.

HOW TO ORDER FROM MS CONNECTOR NUMBERS

Connector numbers in the AMPHENOL and MS numbering systems. Only alternative insert orientations are specified

in MIL-C-26482 which does not include alternative key/keyway orientations.

MS31 - 14 E18 -11 P X

62GB

-11

Ordering

62GB Series

Connectors

INSERT ARRANGEMENT

18 11 PB(044)

Shell size (in sixteenths of an

inch) 8, 10, 12, 14, 16

18,20,22,24

Number of contacts

2, 3, 4, 5, 6, 7, 8, 10, 11, 12,

16, 19, 21', 23, 26, 32, 41, 55,

* consult factory for availability

Contact Style

P - Pins

S - Sockets For hermetic

connectors. P3 denotes pin

contacts with solder bucket

terminations. (Standard range).

P2 denotes pin contacts with

flattened and pierced

terminations.

(Special order).

Orientation

(Omit if normal orientation)

Keys/Keyways: A', B, C, D',

E. F, (see p. 31)

Inserts: W,X,Y,Z.(see p56/57)

*Inactive for new designs

Deviations

(044) Rough grip heavy duty

coupling ring.

(046) Box mounting plug.

(214)Fitted with extension

back shell and strain

relief clamp without

grommet on F types

only

(218) Lever coupling ring

(219)Contacts for flexible punted

wrung (57A and 12E only)

(639) Bright cadmium plated

shells

(345) Contacts for flexible punted

wiring 12H,13H 17H only

(276) Hermetics with gold

plated contacts.

(608) Black anodise.

(416) Electroless nickel

(714) Cadmium plate

olive drab

HOW TO ORDER FROM B.S. CONNECTOR NUMBERS

Select the connector style by reference to BS9522 F0017 using the code below for identification. Note that the B.S.

Specification includes only certain connectors from the table of styles as shown on pp. 8 & 9. Alternative

key/keyway orientations are preferred in the BS9522 F0017 Specification to prevent mis-mating. However, rotated

inserts are permissible where connectors are required to mate with or replace items to MIL-C-26482 on existing

equipment.

62GB - 14E

C2098 18-11

18 11

Style Insert

Arrangement,

see above M - Pin contacts

F - Socket contacts

Alternative

Key/Key way

Orientation

Variant.

0 – Standard

connector

Plugs

Table of Styles

62GB-56T

62GB-56TG

62GB-16A

62GB-56T

(046)

62GB-16E

62GB-16F

62GB-16P

Page No.

Plugs

Table of Styles

62GB

-16J

62GB

-5039

-10

62GB

-5055

-10

62GB

-5056

-10

62GB

-5074

Page No.

Plugs

56T

62GB

-56T

BS9522 F0017 C2092

Basic plug with threaded shell to accept

standard cable accessories

Shell

Size A

Max C

max X

Thread

0.976 0.750

08 24.79 19.05 7/16 - 28 UNEF

0.976 0.859

10 24.79 21.82 9/16 - 24 NEF

0.976 1.031

12 24.79 26.19 11/16 -24NEF

0.976 1.156

14 24.79 29.36 13/16 - 20 UNEF

0.976 1.281

16 24.79 32.54 15/16 - 20 UNEF

0.976 1.391

18 24.79 35.33 1.1 /16 - 18 NEF

&976 1.531

20 24.79 38.89 1.3/16 - 18 NEF

0.976 1.656

22 24.79 42.06 1.5/16 - 18 NEF

0.976 1.777

24 24.79 45.14 1.7/16 - 18 NEF

56TG

62GB

-56TG

BS9522 F001 7 C2093

Basic plug with threaded shell to accept

standard cable accessories. Has shell

grounding spring fingers

Shell

Size A

max C

max X

Thread

0.976 0.750

08 24.79 19.05 7/16 - 28 UNEF

0.976 0.859

10 24.79 21.82 9/16 - 24 NEF

0.976 1.031

12 24,79 26.19 11/16 – 24 NEF

0.976 1.156

14 24.79 29.36 13/16 – 20 UNEF

0.976 1.281

16 24.79 32.54 15/16 - 20 UNEF

0.976 1.391

18 24.79 35.33 1.1 /16 - 18 NEF

0.976 1.531

20 24.79 38.89 1.3/16 - 18 NEF

0.976 1.656

22 24.79 42.06 1.5/16 - 18 NEF

0.976 1.777

24 24.79 45.14 11/16 - 18 NEF

Plugs

16A

62GB

-1 6A

Plug with general duty back shell.

No grommet provided.

Shell

Size A

max C

max G

max M

Thread

1.614 0.750 0.561

08 41.00 19.05 14.25 1/2 - 28 UNEF

1.614 O.859 0,686

10 41.00 21.82 17.43 5/8 - 24 NEF

1.614 1.031 0.811

12 41.00 26.19 20.60 3/4 - 20 UNEF

1.614 1,156 0.936

14 41.00 29.36 23.78 7/8 - 20 UNEF

1.614 1.281 1.061

16 41.00 32.54 26.95 1 - 20 UNEF

1.614 1.391 1.186

18 41.00 35.33 30.13 1.3/16 -18 NEF

1.614 1.531 1.311

20 41.00 38-89 33.30 1.3/16 - 18 NEF

1.614 1.656 1.436

22 41.00 42.06 36.75 1.7/16 - 18 NEF

1.658 1.777 1.561

24 42.11 45.14 39.65 1.7116 - 18 NEF

56T

62GB

-56T(046)

Box-mounting plug. Available for shell size 16:

other sizes to special order. Cable accessories

cannot be fitted.

Shell

Size A

max J

max KL

1.042 1.317 1,000

16 26.47 33.45 25.40 6.32 NC

1.042 1.625 1.250

20 26.47 41.28 31.75 6.32 NC

1.042 1.625 1.250

22 26.47 41.28 31.75 6.32 NC

16E

62GB

-16E

MIL - C26482 MS3116E

Plug with grommet and grommet

nut

Shell

Size A

max C

max G

max

1.281 0.750 0.561

08 32.54 1.05 14.25

1.281 0.859 0.686

10 32.54 21.82 17.431

1.281 1.031 0.811

12 32.54 26.19 20.60

1.281 1.156 0.936 I

14 32.54 29.36 23.78

1.281 1.281 1.061

16 32.54 32.54 26.95

1.281 1.391 1.186

18 32.54 35.33 30.13

1.281 1.531 1 .311

20 32.54 38.89 33.30

1.281 1.656 1.436

22 32.54 42.06 36.75

1.281 1.777 1.561

24 32.54 45.14 39.65

16F

62GB

-16F

MIL - C26482 MS3116F

Plug with grommet and grommet nut fitted with

integral strain relief clamp.

Shell

Size A

max C

dia

max

dia

max

± 0.005

(± 0.13)

1.752 0.750 0.828 0.156

08 44.50 19.05 21.03 3.96

1.752 0.859 0.891 0.188

10 44.50 21.82 22.63 4.78

1.752 1.031 1.016 0.312

12 44.50 26.19 25.81 7.93

1.726 1.156 1.141 0.375

14 43.84 29.36 28.97 9.53

1.866 1.281 1.203 0.500

16 47.40 32.54 30.56 12.70

1.866 1.391 1.426 0.625

18 47.40 35.33 36.22 15.88

2.040 1.531 1.426 0.625

20 51 .81 38.89 36.22 15.88

2.040 1.656 1.567 0.750

22 51.81 42.06 39.80 19.05

2.178 1.777 1.735 0.800

24 55.32 45.14 44.07 20.32

Plugs

16P

62GB

-16P

MIL-C26482 MS3116P

For potted seal. Supplied complete with

detachable potting mould and location ring.

Shell

Size A

max C

max G

max Z

min

1.306 0.750 0.572 0.260

08 33.17 19.05 14.53 6.60

1.415 0.859 0.666 0.463

10 35.94 21.82 16.92 11.76

1.384 1.031 0.822 0.557

12 35.15 26.19 20.88 14.14

1.384 1.156 0.907 0.590

14 35.15 29.36 23.04 14.99

1.384 1.281 1.040 0.713

16 35.15 32.54 26.41 18.11

1.384 1.391 1.165 0.835

18 35.15 35.33 29.59 22.21

1.539 1.531 1.285 1.015

20 39.09 38.89 32.64 25.78

1.539 1.656 1.400 1.015

22 39.09 42.06 35.56 25.78

1.602 1.777 1.540 1265

24 40.69 45.14 39.12 32.13

16J

62GB

- 16J

Plug with cable clamp for unscreened

jacketed cable. No grommet supplied.

Shell

Size A

max C

max G

max Z

min max

1.836 0.750 0.561 0.168 0.230

08 46.64 19.05 14.25 4.28 5.84

1.836 0.859 0.686 0.205 0.312

10 46.64 21.82 17.43 5.21 7.93

1.937 1.031 0.811 0.388 0.442

12 49.20 26.19 20.60 8.59 11.23

2.137 1.156 0.936 0.416 0.539

14 54.28 29.36 23.78 10.57 13.69

2.337 1.281 1.061 0.550 0.616

16 59.36 32.54 26.95 13.97 15.65

2.537 1.391 1.186 0.600 0.672

18 64.45 35.33 30.13 15.24 17.07

2.758 1.531 1.311 0.635 0.747

20 70.05 38.89 33.30 16.13 18.98

2.958 1.656 1.436 0.670 0.846

22 75.13 42.06 36.75 17.02 21.49

3.002 1.777 1.561 0.740 0.894

24 76.25 45.14 39.65 18.80 22.71

Plugs

5039

62GB

-5039

-10

SD/C 235 155 - X

SD/C 235 156 - X

Low profile, solder termination plug with 90°

screened cable outlet.

Shell

Size A

max B

max C

max D

max

10 1.473 0.500 0.980 1.500

37.41 12.70 24.89 38.10

5055

62GB

-5055

-10

SD/2 235 193

- X

Low profile solder termination plug with size 12

90°screened cable outlet.

Shell A B C D

Size max max max max

10 1.800 0.655 0.980 1.800

45.72 16.64 24.89 45.72

5056

62GB

-5056

-10

Audio plug with solder termination

Shell

Size A

max B

max C

max

10 2.375 0.979 / 0.969 0.310

60.33 24.87 / 24.61 7.87

Plugs

5074

62GB

-5074

Flange mounting push/pull plug with threaded shell to

accept standard cable accessories.

Shell

Size A

max B

max CL

10 0.912 1.125 0.866 9/16 - 24 NEF

23.17 28.57 22.00

12 0.912 1.218 0.969 9/16 - 24 NEF

23.17 30.93 24.61

14 0.912 1.312 1.062 9/16 - 24 NEF

23.17 33.32 26.97

Plugs

Insert Orientations

For M I L-C-26482 and for

replacement purposes in

BS9522 FOO 17

Normal position

with pin contacts

Alternative position of insert

with socket contacts

(∅ counterclockwise)

Each diagram shows mating face of insert.

Alternate position of insert

with pin contacts

(∅ clockwise)

Orientation ∅ (degrees)

Insert

Arrangement Normal WX Y Z

8-2 0 58 122 - -

8-3 0 60 210 - -

8-33 0 90 - - -

8-4 0 45 - - -

8-98 0- - - -

10-2 0- - - -

10-6 0 90 - - -

10-7 0- - - -

12-3 0- - 180 -

12-10 0 60 155 270 295

14-5 0 40 92 184 273

14-12 0 43 90 - -

14-15 0 17 110 155 234

14-19 0 30 165 315 -

16-18 0 54 152 180 331

16-23 0 158 270 - -

16-26 0 60 -275 338

18-11 0 62 119 241 340

18-32 0 85 138 222 265

20-16 0 238 318 333 347

20-41 0 45 126 225 -

22-21 0 16 135 175 349

22-55 0 30 142 226 314

24-61 0 90 180 270 324

Key/

Keyway

Orientations

For BS9522 F0017

Datum is always taken from major key or keyway. In

receptacles the major keyway always remains fixed

in relation to the mounting flange. For the

A',B,C,D',E and F orientations, the three bayonet

locations and associated minor keyways are rotated

complete, in accordance with the table below.

N.B.

- The accompanying diagram shows a receptacle

shell, with keyways. Corresponding key orientations

for a mating plug shell are therefore always

clockwise.

Shell

Size Values for ∝

(degrees) Values for θ

(degrees) Values for β

(degrees)

NA* BCD* EFNA* BCD* EFNA* BCD* EF

8 105 92 - - 118 118 82 35 35 - - 35 30 50 75 75' - - 75 100 75

10 105 95 85 125 115 115 85 35 35 35 35 35 30 50 75 75 75 75 75 100 75

12 105 97 89 121 113 115 85 35 35 35 35 35 30 50 75 75 75 75 75 100 75

14 105 98 91 119 112 75 120 35 35 35 35 35 30 50 75 75 75 75 75 100 75

16 105 99 93 117 111 75 120 35 35 35 35 35 30 50 75 75 75 75 75 100 75

18 105 100 95 115 110 75 120 35 35 35 35 35 30 50 75 75 75 75 75 100 75

20 105 100 95 115 110 75 120 35 35 35 35 35 30 50 75 75 75 75 75 100 75

22 105 101 97 113 109 7S 120 35 35 35 35 35 30 50 75 75 75 100 75 75 75

24 105 101 97 113 109 75 120 35 35 35 35 35 30 50 75 75 75 75 75 100 75

Shell

Size Values for ϕ (degrees)

Orientation Values for ω (degrees)

Orientation

NA* BCD* EFNA* BCD* EF

8 50 50 50 50 50 30 45 60 47 - - 73 73 47

10 50 50 50 50 50 30 45 60 50 40 80 70 70 50

12 50 50 50 50 50 30 45 60 52 44 76 68 70 50

14 50 50 50 50 50 30 35 60 53 46 74 67 30 75

16 50 50 50 50 50 30 35 60 54 48 72 66 30 75

18 50 50 50 50 50 30 35 60 55 50 70 65 30 75

20 50 50 50 50 50 30 35 60 55 50 70 65 30 75

22 50 50 50 50 50 30 35 60 56 52 68 64 30 75

24 50 50 50 50 50 30 35 60 56 52 68 64 30 75

* now inactive for new

designs but available for

replacement purposes.

Superseded in BS9522 F0017

by orientations E and F.

62 GB- Series Receptacles

Miniature Bayonet Lock Connectors

Complies with MIL-C-26482 CE-2Ra

his miniature bayonet lock connector series offers desi

ners

important features not found in any other range of connectors.

They are developed and manufactured entirely in the U.K.

by AMPHENOL Ltd., and have full qualification approval to

British Standards Specification BS 9522 F0017 and British

Defence Specification DEF STAN 59-35 (Part 3) Sec. 7.

mphenol

This catalogue to be used in conjunctio n with Catalogues:

CE-2 Pa – 6 2 GB Serie s Plugs

CE-2Aa – 62GB Series Accessories

62GB and

Pattern 608

New Planforms

Current:

(a) Maximum current per individual contact (in isolation)* at ambient

temperature of 85°C

Contact size 12: 23 A

(b) Maximum current per contact through all contacts simultaneously at

an ambient temperature of 85°C

Contact size 12: 20 A

Current:

(a) Maximum current per

individual contact (in

isolation)* at ambient

temperature of 85°C

Contact size 8: 45 A

(b) Maximum current per contact

through all contacts

simultaneously at an ambient

temperature of 85°C

Contact size 8: 40 A

Sea level 8500m (27,900ft) 21,340m (70,OOOft)

1013 mbar g 320 mbar 44 mbar

Voltage rating I II III I II III I II III

Working voltages ** 700 1200 1500 550 650 800 330 380 450

(nominal)

d.c. or a.c. peak

Voltage proof 2100 3000 3000 1100 1300 1300 660 760 750

d.c. or a.c. peak

* i.e. when only one contact per connector is electrically loaded.

g 1 mbar=102 N/m2=100 Pa

** Establishment of electrical safety factors is the responsibility of the user

CONTENTS Page

Amphenol 62GB Solder Connectors 4

Schedule of Tests 5-6

Connector Styles Available 7

Insert Availability 9-10

Ordering 62GB Series Connectors 11-12

Box Mounting Receptacles - Table of Styles 13-14

Box Mounting Receptacles 15-19

Single Hole Fixing Receptacles - Table of Styles 20-22

Single Hole Fixing Receptacles 23-30

Cable Mounting Receptacles - Table of Styles 31

Cable Mounting Receptacles 32-34

Insert Orientations 35

Key/Keyway Orientations 36

Amphenol ® 62GB

solder connectors

his miniature bayonet lock connector series offers

designers important features not found in any other range

of connectors. The range has full qualification approval to

British Standards Specification BS 9522 FOO 17 and British

Defence Specification DEF STAN 59-35 (Part 3) Sec. 7.

62GB Series connectors - developed and manufactured

entirely in the United Kingdom by Amphenol Limited. They

are the first and only British connectors to have achieved

this. A doubly strong position which Amphenol are well

geared to handle. The manufacturing facil ities of the

Whitstable plant have been cited as exemplary in Europe.

Certainly the layout is extensive and extremely efficient;

safety awards have been attained every time returns have

been submitted to the British Safety Council.

62GB Series connectors have been well established with

Government authorities on an international scale and users

can be found in Sweden, Denmark, Norway, Finland,

Germany, Spain, Holland, India, Canada and Italy.

Derating

Connectors must be derated under the following

operating conditions:

1. At elevated ambient temperatures, the current ratings

are reduced so that total maximum hot spot

temperature of 125°C is not exceeded.

2. At high altitudes, revised voltage ratings become

effective as shown on page 7.

3. When connectors to different specifications are

intermated (e.g. BS 9522 FOO 17 and

MIL-C26482), the combination must not be

operated under conditions more severe than the

less stringent clause of either specification.

Amphenol 62GB connectors are designed to meet

the most stringent requirements of both

specifications.

Military Specifications

British Standards Specification BS 9522 FOO 17

closely corresponds to the United States Military

Specification MIL-C-26482 solder terminations.

Certain differences exist between the schedules which

can be seen on pages 2 and 3.

Approved gauges are used to check interchangeability

of 62GB series with other connectors manufactured to

BS 9522 FOO 17 or MIL-C-26482.

Basic Construction

62GB Series can be supplied in brass or stainless steel.

The normal shell finish used, which has a high resistance to

corrosion, is zinc cobalt olive drab. Other finishes may be

supplied to special order, such as cadmium plate which is

available by adding deviation (714) to the end of part

number.

Inserts are of polychloroprene rubber compounded to an

Amphenol specification. Operating temperature range is

-55°C to 125°C, and the connectors have gold-plated

contacts designed for soldered connections. Configurations

for size 20 contacts range between 2 contacts in the size 8

12.7mm (0.5in diameter) shell up to a maximum of 61

contacts in the size 2436.1 mm (1.5in diameter) shell.

Intermediate sizes, and contact data for heavier current

ratings are shown in the insert availability chart on page 6

and 7.

Hermetic connectors with glass sealed dialectric are

manufactured with mild steel shells and nickel iron

contacts plated tin over copper.

* Other finishes ar e available on request.

Protection Agai nst Mis-Mating or Cross-Plugging

In BS 9522 FOO 17 positive shell-to-shell keying is

provided with keys and keyways in a choice of either the

normal (N) or any of the four preferred alternate

positions: B, C, E and F. This prevents mismating between

shells of different orientations and overcomes the

difficulties associated with rotated inserts and a standard

key-keyway orientation. In the latter system, damage to

the inserts or contacts can result if excessive force is used

to engage non-mating pairs.

Rotated inserts are, however, permissible in BS 9522 FOO

17 connectors if required to mate with or replace units to

MIL-C-26482 mounted in existing equipment. Connectors

have normal orientations manufactured to BS 9522 FOO 17

or MIL-C-26482 are fully intermateable as also are

connectors with inserts in positions W, X, Y or Z.

This catalogue to be used in conjunction with Catalogues:

CE-2Pa – 62GB Series Receptacles

CE-2Aa – 62GB Series Accessories

Schedule of Tests

Required for Qualification

Approval

Tests

Visual Examination

Dimensions, outline mass(including

contacts) Compatability Gauging

procedure

Polarization

Engaging and sepa rating force, connector

Contact Holding Force

Sealing (air pressure)

Sealing Hermetic

Contact Resistance

Housing (Shell) Continuity

In sulation Resistance

Voltage Proof

Soldering

Bumping

Vibration

Shock

Acceleration (Steady State)

Rapid Change of Temperature

Climatic Sequence

Flammability

Damp Heat (Steady State)

Brief Description

Engagement max: 0,90 Nm (8.0 lbf.in.) to

4,97 Nm (44 lbf.in.) according to shell size.

Separation min: 0,22 Nm (2.0 lbf.in.) to 1,58

Nm (14.0 lbf.in .) according t o shel l size.

0,21 N (0.047 lbf) min.size 20

0,56 N (0.126 lbf)min. size 16

Max leakage 28,53 uNm/s (1 cm3/h), 1

bar (14.5 p.s.i.) differential.

Hermetic rec eptacle s have a max leak of 0.1 mic ron

cubic foot per hour (1 x 10-6Cm3/s)

5 milliohms max.

200 milliohms max. 5 milliohms max.

grounding spring styles.

5,000 Megaohms at 500 - 50 V d.c.

See page 7. Duration 1 minute

As BS 9520: 1974, Clause 1.2.6.6,

Method 2.

As BS 9520: 1974, Clause 1.2.6.1. 4,000

-10 bumps / 390m / s2 (40 gn).

As BS 9520: 1974, Clause 1.2.6.2.1. Procedure A. 10 Hz

to 5000 Hz, 0.75 mm / 10 gn.

As BS 9520: 1974, Clause 1.2.6.3. 981

m/s2 (100 g n).

As BS 9520: 1974, Clause 1.2.6.4. 490

m/s2 (50 gn).

As BS 9520: 1974, Clause 1.2.6.7. -550

C to - 1250 C.

As BS 9520: 1974, Clause 1.2.6.11.

Severity 55/125/56.

As BS 9520: 1974, Clause 1.2.6.8. Direct

flame applied, duration 1 minute.

As BS 9520: 1974, Clause 1.2.6.14.

Severity 56 days.

Schedule of Tests

Required for Qualification

Approval

Tests Brief Description

Immersion (at low air pressure)

Mechanical Endurance

High Temperature Endurance

Mould Growth

Salt Mist

Dust

Robustness of Terminations

Contact Retention (in in sert)

Insert Retention (in shell)

Test Prod Damage

Impact

Grounding Spring Holding Force Plugs

with gr ounding springs only.

Fluid Resistance

Compass Safe Distance

3 cycles at 30 mins each cycle, total imm ersion in

water at pressure 44 m bar.

500 operations minimum

Long term: 1,000 hrs. at 850C ambient carrying the

specified current. Short term: 250 hrs at 1250C, no

current.

As BS 9520: 1983, Clause 1.2.6.16

28 days duration.

As BS 9520: 1983, Clause 1.2.6.17.

Severity 1.

As BS 9520: 1983, Clause 1.2.6.18

Exposure 30 minutes.

44,5 N (101bf) size 16

22,2 N (5 lbf) size 20

67,0 N (15 lbf) min. size 20

112,0 N (25 lbf) min. size 16

517 KN1m2 (751bf/in2) min.

Moment: 0,056 Nm (0.5 lbf in) size 20

0,225 Nm (2 lbf in) size 16

Five impacts, drop height 1 m (3ft.3 in.).

1,17 N (0.263 lbf) to 2,74 N (0.616 lbf)

acco rding to si ze.

Immersion in 4 solvents and 9 fluids

including aircraft fuels, lubricating oils and

hydraulic fluids.

As BS 9520: 1974, Clause 1.2.5.11. 127

mm (5.0 in) min .

Connector Styles

Available

Receptacles

Box Mounting

See Pages 13-19

ccessories

See Catalogue CE-2Aa

Single Hole Mounting

See Pages 20-30

Cable Mounting

See Pages 31-34

Hermetic Seal

See Pages 19 & 26

Insert Availability

NOTES

* This insert arrangeme nt is not incl uded in B.S.

spec., but is available and. listed in MIL-C-26482.

g Due to the arrangement of contacts in the

14-12 insert arrangement it is classified, for

current derat i ng , in the shel l size ra ng e 18-24.

Lettering of inserts shown above corresponds to view of fron t

(mating surface of pi n inserts or rear face (cable accessory

end) of socket inserts.

KEY • No 16 size contact s

No 20 size contacts

CURRENT RATING

Maximum current per individual contact (in isolation) at a

maximum ambient temperature o f 85°C: Size 20 contact 7.5A

Size 16 contact 13-OA The performance of 62GB Series

connectors at all times exceeds the maximum c ontinuous

bunched rating of the app ropriate size wire, or cable of

equiva lent temperature rating. This bunched rating i s therefore

the determining factor. In the case of mixed loadings, the

greatest individual load shall be the bunched loading. In any

combination of ambient temperature plus temperature rise due

to current flow through the contacts, the maximum connector

internal hot spot temperature of 125°C must not be exceeded.

That is, when only one contact per connector is load ed.

Insert Availability

OLTAGE RATINGS

ALTITUDE-THOUSANDS OF FEET (METRES)

Relationship between flashover voltage and

altitude for each v oltage rating

VOLTAGE RATINGS

Two categories of voltage rating are spe cified in

BS9522 F0017 , F0 038 and N0001.

Rating 1 (700V d.c. working at sea-level) Applicable to the

high contact density inserts shown in the upper sect ion of the

insert availability diagram above.

Rating 2 (1200V d.c. working at sea-leve l) Applicable to

the inserts shown in the lower sect ion of the insert

availability diagram.

Altitude derating. Informatio n on volt a ge d e rat in g fo r

opera tion at altitudes above sea-level can be obtained from

the flashover voltage altitude curves on the left.

22-55

D.C.

WORKING

OLTAGE

A.C.

WORKING

VOLTAGE

R.M.S.

PROOF

VOLTAGE

D.C. OR A.C.

PEAK

Rating 1

Sea level

300 mb at

20°C

8,500m

(27,800 ft)

44 mb at

20°C

20,000m

(66,000 ft)

Rating 2

Sea level

300 mb at

20°C

8,500m

(27,800 ft)

44 mb at

20"C

20,000m

(66,000 ft)

700

550

330

120

650

380

500

390

230

850

460

270

2100

1100

660

3000

1300

760

LTITUDE

24-61

Ordering

62GB Series

Connectors

To obtain the specific connector required write down the connector number from the

typical example below. Only inserts shown in the availability chart on p. 10&11 can be

specified. All connectors are delivered with protective dust covers

62GB SHELL STYLE

14E

Environmental cod e

A - Plain shell, exposed

solder buckets. No

grommet

E - Insert seal and grommet seal

with grommet nut (excluding

12E which has plain shell and

no gro mme t or nu t)

F - As (E) but grommet nut

has integral strain relief

clamp

H - Hermetic seal no cable

accessories

J - As (E) but with resilient gland

seal and nut for unscreened

jacketed cable. No grommet

supplied. See pp. 26-27 for

accessory to accept

screened jacketed cable.

P - Potting construction

complete with potting

mould

T - Exposed solder buckets.

Threaded shell for cable

accessories

Shell style

0 - Receptacle wall mounting

1 - Receptacle cable

mounting

2 - Receptacle box mounting

3 - Receptacle, solder flange

mounting

4 - Receptacle, internally

threaded with cable

accessories as illustrated, for

single hole mounting

6 - Plug cable mounting

7- Receptacle, plain shell,

sin

le hole mountin

Specification key

1 - Styles originally specified in

MIL-C-26482

5 - Styles exclusive to

BS9522 F0017

Series designation

62 GB - Aluminium shell

62 GB SS -Stainless steel shell*

62 GB CU - Brass shell*

*consult factory for availability

62GB-XXH-Hermetic mild

steel shell.

HOW TO ORDER FROM MS CONNECTOR NUMBERS

Connector numbers in the AMPHENOL and MS numbering systems. Only alternative insert orientations are specif ied

in MIL-C-26482 which does not include alternative key/keyway orientations.

MS31 - 14 E 18 -11 P X

62GB - 14 E 18 -11 P X

Ordering

62GB Series

Connectors

INSERT ARRANGEMENT

18 11 P B (044)

Shell size (in sixteenths of an

inch) 8, 10, 12, 14, 16

18,20,22,24

Number of conta ct s

2, 3, 4, 5, 6, 7, 8, 10, 11, 12,

16, 19, 21', 23, 26, 32, 41, 55,

* consult factory for availability

Contact Style

P - Pins

S - Sockets For hermetic

connectors. P3 denotes pin

contacts with solder bucket

terminations. (Standar d ran ge).

P2 denotes pin contacts with

flattened and pierced

terminations.

(Special order).

Orientation

(Omit if normal orientation)

Keys/Keyways: A', B, C, D',

E. F, (see p. 31)

Inserts: W,X,Y,Z.(see p56/57)

*Inactive for new desi

Deviations

(044) Rough grip heavy duty

coupling ring.

(046) Box mounting plug.

(214)Fitted wit h exte nsion

back shell and strain

relief clamp without

grommet on F types

only

(218) Lever coupling ring

(219)Contacts for flexible punted

wrung (57A and 12E only)

(639) Bright cadmium plated

shells

(345) Contacts for flexible punted

wiring 12H,13H 17H only

(276) Hermetics with gold

plated contacts.

(608) Black anodise.

(416) Electroless nickel

(714) Cadmium plate

olive drab

HOW TO ORDER FROM B.S. CONNECTOR NUMBERS

Select the connector style by reference to BS9522 F0017 using the code below for identification. Note that the B.S.

Specification includes only certain connectors from the table of styles as shown on pp. 8 & 9. Alternative

key/keyway orientations are pre ferred in the BS9522 F0017 Specifi cation to prevent mis-mating. However, rotated

inserts are permissible where connectors are required to mate with or replace items to MIL-C-26482 on existing

equipment.

62GB - 14E

C2098 18-11

18 11 P

M B

B O

Style Insert

Arrangement,

see above M - Pin contacts

F - Socket contacts

Alternative

Ke y/Ke y way

Orientation

Variant.

0 – Standard

connector

Box Mounting

Receptacles

Table of Styles

62GB-50

Page No.

62GB-10

62GB-10E 16

62GB-10F 16

62GB-10J 17

62GB-10P 17

62GB-12E 18

e No.

62GB-12E(219) 18

62GB-12H

Hermetic Seal 19

Box Mounting

Receptacles

Table of Styles

Shell

Size A

max B

± 0.005

(± 0.13)

max

sq.

Sq.

E dia.

± 0.010

(± 0.254)

±0 005

(± 0.13)

dia

max.

dia.

max.

Thread

0.978 0.062 0.817 0.594 0120 0.445 0.434 0.473

08 24.84 1.58 20.75 15.09 3.05 11.3 11.02 12.02 7/16 – 28 UNEF

0.978 0.062 0.942 0.719 0.120 0.445 0.558 0.590

10 24.84 1.58 23.93 18.26 3.05 11.3 14.17 14.99 9/16 – 24 NEF

0.978 0.062 1.036 0.812 0.120 0.445 0.683 0.750

12 24.84 1.58 26.32 20.63 3.05 11.3 17.35 19.05 11/ 16 - 24 NEF

0.978 0.062 1.130 0.906 0.120 0.445 0.808 0.875

14 24.84 1.58 28.70 23.10 3.05 11.3 20.52 22.23 13/16 – 20 UNEF

0.978 0.062 1.223 0.969 0.120 0.445 0.933 1.000

16 24.84 1.58 31.07 24.61 3.05 11.3 23.7 25.4 15/16 – 20 UNEF

0.978 0.062 1.317 1.062 0.120 0.445 1.057 1.125

18 24.84 1.58 33.45 26.58 3.05 11.3 26.85 28.58 1.1/16 - 18 NEF

1.048 0.080 1.442 1.156 0.120 0.555 1.182 1.250

20 26.62 2.03 36.63 29.36 3.05 1410 30.02 31.75 1.3/16 - 18 NEF

1.048 0.080 1.567 1.250 0.120 0.555 1.307 1.375

22 26.62 2.03 39.80 31.75 3.05 14.10 33.20 34.93 1.5/16 - 18 NEF

1.048 0.080 1.692 1.375 0147 0.590 1.432 1.500

24 26.62 2.03 42.98 34.93 3.d4 14.99 36.37 38.1 1.7/16 – 18 NE F

Shell

Size A

max. B

± 0.005

( ± 0.13)

Max.

sq.

± 0.010

( ± 0.254)

± 0.005

( ± 0.13)

dia

max.

dia.

max.

1.624 0.062 0.817 0.594 0.120 0.445 0.561 0.473

08 41.25 1.58 20.75 15.09 3.05 11.3 14.25 12.02 1/2 - 28 UNEF

1.624 0.062 0.942 0.719 0.120 0.445 0.686 0.590

10 41.25 1.58 23.93 18.26 3.05 11.3 17.43 14.99 5/8 - 24 NEF

1.624 0.062 1.036 0.812 0.120 0.445 0.811 0.750

12 41.25 1.58 26.32 20.63 3.05 11.3 20.60 19.05 3/4 - 20 UNEF

1.624 0.062 1.130 0.906 0.120 0.445 0.936 0.875

14 41.25 1.58 28.70 23.10 3.05 11.3 23.78 22.23 7/8 - 20 UNEF

1.624 0.062 1223 0.969 0.120 0.445 1.061 1.000

16 41.25 1.58 31.07 24.61 3.05 11.3 26.98 25.4 1 - 20 UNEF

1.624 0.062 1.317 1.062 0.120 0.445 1.186 1.125

18 41.25 1.58 33.45 26.58 3.05 11.3 30.12 28.58 1.3/1 6 - 18 NEF

1 .687 0.080 1.442 1.156 0.120 0.555 1.311 1 250

20 42.85 2.03 36.63 29.36 3 05 14.10 33.30 31.75 1.3/1 6 - 1 8 NE F

1.687 0.080 1.567 1.250 0.120 0.555 1.436 1.375

22 42.85 2.03 39.80 31.75 3.05 14.10 36.47 34.93 1.7/16 - 1 8 NEF

1.730 0.080 1.692 1.375 0 147 0.590 1.561 1.500

24 43.94 2.03 42.98 34.93 3.73 14.99 39.65 38.1 1.7/16 - 1 8 NE F

Box Mounting

Receptacles

50T 62GB-50T

BS9522-C2096

4-hole flange mounting with threaded shell to

accept standard cable accessories.

10A 62GB-10A

4-Hole flange mounting with general

duty back shell. No grommet supplied.

Box Mounting

Receptacles

10E 62GB-10E

MIL-C-26482 MS3 11 0E

Shell A B C D E F G V

Size max ± 0.005 max TP ± 0.010 ± 0.005 dia dia.

( ± 0.13) sq. sq. (± 0.254) (± 0.13) max max

1.281 0.062 0.817 0.594 0.120 0.445 0.561 0.473

08 32.54 1 .58 20.75 15.09 3.05 11.3 14.25 12.02

1.281 0.062 0.942 0.719 0 .120 0.445 0.686 0.590

10 32.54 1.58 23.93 18.26 3.05 11.3 17.43 14.99

1.281 0.062 1.036 0.812 0.120 0.445 0.811 0.750

12 32.54 1.58 26.32 20.63 3.05 11.3 20.60 19.05

1.281 0.062 1.130 0.906 0 .120 0.445 0.936 0.875

14 32.54 1.58 28.70 23.10 3.05 11.3 23.78 22.23

1.281 0.062 1.223 0.969 0.120 0.445 1.061 1.000

16 32.54 1.58 31.07 24.61 3.05 11.3 26.98 25.4

1.281 0.062 1.317 1.062 0 .120 0.445 1.186 1.125

18 32.54 1.58 33.45 26.58 3.05 11.3 30.12 28.58

1.383 0.080 1.442 1.156 0.120 0.555 1.311 1.250

20 35.13 2.03 36.63 29.36 3.05 14.10 33.30 31.75

1.383 0.080 1.567 1.250 0 .120 0.555 1.436 1.375

22 35.13 2.03 39.80 31.75 3.05 14.10 36.47 34.93

1 .383 0.080 1.692 1.375 0.147 0.590 1.561 1.500

24 35.13 2.03 42.98 34.93 3.74 14.99 39.65 38.1

10F 62GB-10F

MIL-C-26482 MS3 1 10F

Shell A B C D E F G H Y

Size max. ± 0.005 max. TP ± 0.010 ± 0.005 dia ± 0.005 dia.

(± 0.13) sq. Sq. (± 0.254) (± 0.13) max. (± 0.13) max.

1.762 0.062 0.817 0.594 0.120 0.445 0.828 0.156 0.473

08 44.76 1.58 20.75 15.09 3.05 11.3 21.03 3.96 12.01

1.762 0.062 0.942 0.719 0.120 0.445 0.891 0.188 0.590

10 44.76 1.58 23.92 18.26 3.05 11.3 22.63 4.78 14.99

1 .762 0.062 1.036 0.812 0.120 0.445 1.016 0.312 0.750

12 44.76 1.58 26.31 20.63 3.05 11.3 25.81 7.93 19.05

1.736 0.062 1.130 0.906 0.120 0.445 1.141 0.375 0.875

14 44.10 1.58 28.70 23.10 3.05 11.3 28.98 9.58 22.23

1.876 0.062 1.223 0.969 0.120 0.445 1.203 0.500 1.000

16 47.65 1.57 31.07 24.61 3.05 11.3 30.56 12.7 25.4

1.876 0.062 1.317 1.062 0.120 0.445 1.426 0.625 1.125

18 47.65 1.58 33.45 26.58 3.05 11.3 36.22 15.87 28.58

2.118 0.080 1.442 1.156 0.120 0.555 1.426 0.625 1.250

20 53.80 2.03 36.63 29.36 3.05 14.10 36.22 15.88 31.75

2.118 0.080 1.567 1.250 0.120 0.555 1.567 0.750 1.375

22 53.80 2.03 39.80 31.75 3.05 14.10 39.80 19.05 34.93

2.250 0.080 1.692 1.375 1.147 0.590 1.735 0.800 1.500

24 57.15 2.03 42.98 34.93 3.74 14.99 44.07 20.32 38.10

4-hole flange mounting with grommet

and grommet nu t

4-hole flange mounting with grommet and

grommet nut fitted with integral strain relief

clamp

Box Mounting

Receptacles

Shell

Size A

max B

± 0.005

( ± 0.13)

max.sq D

± 0.010

( ± 0.254)

± 0.005

(± 0.13)

dia.

max.

dia

max

Z Cable Entry

min max

closed free

1.846 0.062 0.817 0.594 0.120 0.445 0.561 0.473 0.168 0.230

08 46.89 1.58 20.75 15.09 3.05 11.3 14.25 12.02 4.28 5.84

1.846 0.062 0.942 0.719 0.120 0.445 0.686 0.590 0.205 0.312

10 46.89 1.58 23.93 18.26 3.05 11.3 17.43 14.99 5.21 7.93

1.947 0.062 1.036 0.812 0.120 0.445 0.811 0.750 0.338 0.442

12 49.45 1.58 26.32 20.63 3.05 11.3 20.60 19.05 8,59 11.23

2.147 0.062 1.130 0.906 0.120 0.445 0.936 0.875 0.416 0.539

14 54.54 1.58 28.70 23.10 3.05 11.3 23.78 22.23 10.57 13.69

2.347 0.062 1.223 0.969 0.120 0.445 1.061 1.000 0.550 0.616

16 59.61 1.575 31.07 24.61 3.05 11.3 26.96 25.4 13.97 15.65

2.547 0.062 1.317 1.062 0.120 0.445 1.186 1.125 0.600 0.672

18 64.70 1.575 33.45 26.58 3.05 11.3 30.12 28.58 15.24 17.07

2.831 0.080 1.442 1.156 0.120 0.555 1.311 1.250 0.635 0.747

20 71.91 2.03 36.63 29.36 3.05 14.10 33.30 31.75 16.13 18.98

3.031 0.080 1.567 1.250 0.120 0.555 1.436 1.375 0.670 0.846

22 76.99 2.03 39.80 31.75 3.05 14.10 36.47 34.93 17.02 21.49

3.074 0.080 1.692 1.375 0.147 0.590 1.561 1.500 0.740 0.894

24 78.08 2.03 42.98 34.93 3.73 14.99 39.65 38.1 18.80 22.71

10P 62GB-10P

4-hole flange mounting for potting

Shell

Size A

max B

± 0.0 05

(± 0.13)

max.sq. D

± 0.010

(± 0.254)

± 0.005

(± 0.13)

dia.

max

dia.

max

dia.

min

1.453 0.062 0.817 0.594 0.120 0.445 0.572 0.473 0.260

08 36.91 1.575 20.75 15.09 3.05 11.3 14.53 12.02 6.60

1.453 0.062 0.942 0.179 0.120 0.445 0.666 0.590 0.463

10 36.91 1.58 23.93 18.26 3.05 11.3 16.92 14.99 11.76

1.453 0.062 1.036 0.812 0.120 0.445 0.822 0.750 0.577

12 36.91 1.58 26.32 20.63 3.05 11.3 20.88 19.05 14.15

1.453 0.062 1.130 0.906 0.120 0.445 0.907 0.875 0.590

14 36.91 1.58 28.70 23.10 3.05 11.3 23.04 22.23 14.99

1.453 0.062 1.223 0.969 0.120 0.445 1.040 1.000 0.713

16 36.91 1.58 31.07 24.61 3.05 11.3 26.42 25.40 18.11

1.453 0.062 1.317 1.062 0.120 0.445 1.165 1.125 0.835

18 36.91 1.58 33.45 26.58 3.05 11.3 29.60 28.58 22.21

1.672 0.080 1.442 1.156 0.120 0.555 1.285 1.250 1.015

20 42.47 2.03 36.63 29.36 3.05 14.10 32.64 31.75 25.78

1.672 0.080 1.567 1.250 0.120 0.555 1.400 1.375 1.015

22 42.47 2.03 39.80 31.75 3.05 14.10 35.56 34.93 25.78

1.734 0.080 0.692 1.375 0.147 0.590 1.540 1.500 1.265

24 44.05 2.03 42.98 34.93 3.74 14.99 39.12 38.10 32.13

10J

4-hole flange mounting with clamp for

unscreened jacketed cable. No grommet

supplied

62GB-10J

Box Mounting

Receptacles

12E 62GB-12E

BS9522 - F0017 - C 2097

MIL-C-26482 MS311 2E

Shell

Size A

max 8

± 0.005

(± 0.13)

max

sq.

± 0 010

(± 0.254)

± 0.005

( ± 0.13)

dia.

max.

L V

dia.

max.

0.978 0.062 0.817 0.594 0.120 0.445 0.434 0.800 0.473

08 24.84 1.58 20.75 15.09 3.05 11.3 11.02 20.32 12.02

0.978 0.062 0.942 0.719 0.120 0.445 0.558 0.800 0.590

10 24.84 1.58 23.93 18.26 3.05 11.3 14.17 20.32 14.99

0.978 0.062 1.036 0.812 0.120 0.445 0.683 0.800 0.750

12 24.84 1.58 26.32 20.63 3.05 11.3 17.35 20.32 19.05

0.978 0.062 1.130 0.906 0.120 0.445 0.808 0.800 0.875

14 24.84 1.58 28.70 23.10 3.05 11.3 20.52 20.32 22.23

0.978 0.062 1.223 0.969 0.120 0.445 0.933 0.800 1.000

16 24.84 1.58 31.07 24.61 3.05 11.3 23.70 20.32 25.4

0.978 0.062 1.317 1.062 0.120 0.445 1.057 0.800 1.125

18 24.84 1.58 33.45 26.58 3.05 11.3 26.85 20.32 28.58

1.048 0.080 1.442 1.156 0.120 0.555 1.182 0.875 1.250

20 26.62 2.03 36.63 29.36 3.05 14.10 30.02 22.23 31.75

1.048 0.080 1.567 1.250 0.120 0.555 1.307 0.875 1.375

22 26.62 2.03 39.80 31.75 3.05 14.10 33.20 22.23 34.93

1 .048 0.080 1.692 1.375 0.147 0.590 1.432 0.875 1.500

24 26.62 2.03 42.98 34.93 3.74 14.99 36.37 22.23 38.1

BS9522 - F0017 - C2262

Shell

Size A

max B

± 0.0 05

(±0.13)

max

sq.

dia

0.010

± 0.005

(± 0.13)

dia.

Max

± 0.0 20

(± 0.51) min max. max min

dia

max.

0.982 0.062 0.817 0.594 0.120 0.445 0.434 0.089 0.030 0.028 0.198 0.166 0.473 0.800

08 24.95 1.58 20.75 15.09 3.05 11.3 11.02 2.26 0.76 0.70 5.03 4.22 12.02 20.32

0.982 0.062 0.942 0.719 0.120 0.445 0.558 0.089 0.030 0.028 0.198 0.166 0.590 0.800

10 24.95 1.58 23.93 18.26 3.05 11.3 14.17 2.26 0.76 0.70 5.03 4.22 14.99 20.32

0.982 0.062 1.036 0.812 0.120 0.445 0.683 0.089 0.030 0.028 0.198 0.166 0.750 0.800

12 24.95 1.58 26.32 20.63 3.05 11.3 17.35 2.26 0.76 0.70 5.03 4.22 19.05 20.32

0.982 0.062 1.130 0.906 0.120 0.445 0.808 0.089 0.030 0.028 0.198 0.166 0.875 0.800

14 24.95 1.58 28.70 23.10 3.05 11.3 20.52 2.26 0.76 0.70 5.03 4.22 22.23 20.32

0.982 0.062 1.223 0.969 0.120 0.445 0.933 0.089 0.030 0.028 0.198 0.166 1.000 0.800

16 24.95 1 .58 31.07 24.61 3.05 11.3 23.70 2.26 0.76 0.70 5.03 4.22 25.4 20.32

0.982 0.062 1.317 1.062 0.120 0.445 1.057 0.089 0.030 0.028 0.198 0.166 1.125 0.800

18 24.95 1.58 33.45 26.58 3.05 11.3 26.85 2.26 0.76 0.70 5.03 4.22 28.58 20.32

1.057 0.080 1.442 1.156 0.120 0.555 1.182 0.076 0.030 0.028 0.185 0.153 1.250 0.875

20 26.85 2.03 36.63 29.36 3.05 14.10 30.02 1.93 0.76 0.70 4.70 3.89 31.75 22.23

1.057 0.080 1.567 1.250 0.120 0.555 1.307 0.076 0.030 0.028 0.185 0.153 1.375 0.875

22 26.85 2.03 39.80 31.75 3.05 14.10 33.20 1.93 0.76 0.70 4.70 3.89 34.93 22.23

1.057 0.080 1.692 1.375 0.147 0.590 1.432 0.076 0.030 0.028 0.185 0.153 1.500 0.875

24 26.85 2.03 42.98 34.93 3.74 14.99 36.37 1.93 0.76 0.70 4.70 3.89 38.1 22 23

62GB-12E

(

219

)

12E

(

219

)

4-hole flange mounting with plain shell

with film wire terminations

Box Mounting

Receptacles

Hermetic Seal

12H 62GB-12H

Shell

Size A

max B

± 0.005

(± 0.13)

max

sq.

D E

0.008

(± 0.203)

(±.051) .002

± 0.0 05

(± 0.13)

±0.005

(±0.13)

S Y

0.828 0.062 0.812 0.594 0.120 0.443 0.568 1.250 0.473

08 21.03 1.57 20.61 15.08 3.05 11.25 14.42 31.73 12.01

0.828 0.062 0.937 0.719 0.120 0.443 0.695 1.359 14.99

10 21.03 1.57 23.79 18.29 3.05 11.25 17.53 34.52 14.99

0.828 0.062 1.031 0.812 0.120 0.443 0.864 1.531 0.750

12 21.03 1.57 26.17 20.57 3.05 11.25 21.84 38.89 19.05

0.828 0.062 1.125 0.906 0.120 0.443 0.989 1.656 0.875

14 21.03 1.57 28.57 23.11 3.05 11.25 25.15 42.06 22.23

0.828 0.062 1.218 0.969 0.120 0.443 1.113 1.781 1.000

16 21.03 1.57 30.93 24.64 3.05 11.25 28.19 45.24 25.40

0.828 0.062 1.312 1.062 0.120 0.443 1.238 1.891 1.125

18 21.03 1.57 33.32 26.92 3.05 11.25 31.49 48.03 28.58

0.890 0.093 1.437 1.156 0.120 0.561 1.363 2.031 1.250

20 22.60 2.36 36.49 29.46 3.05 14.24 34.54 51.59 30.75

0.890 0.093 1.562 1.250 1.120 0.561 1.488 2.156 1.375

22 22.60 2.36 39.67 31.75 3.05 14.24 37.85 54.76 34.93

0 890 0.093 1.687 1.375 0.147 0.593 1.615 2.277 1.500

24 22.60 2.36 42.84 35.05 3.81 15.06 41.15 57.84 38.10

4-hole square mounting with exposed

solder buckets or flattened and pierced

pins.

Single Hole Fixing

Receptacles

Table of Styles

62GB-57

Page No.

62GB-57A (219) 23

62GB-14E 24

62GB-14F 24

62GB-57

62GB-17P 25

62GB-17H

Hermetic Seal 26

Single Hole Fixing

Receptacles

Table of Styles

62GB-13H

Hermetic Seal

62GB-5005-10

62GB-5036-10

62GB-5016-10

62GB-5024

62GB-5052

62GB-5030

Page No.

Single Hole Fixing

Receptacles

Table of Styles

62GB-5065

62GB-5067

Page No.

Single Hole Fixing

Receptacles

57A 62GB-57A

BS9522 - F0017 - C2099

Single hole mounting with plain shell for

direct wiring to exposed solder buckets.

Has panel 'O' ring seal.

Shell

Size A

max B

± 0.005

(± 0.13)

sq, F

± 0.005

(±0.13)

min max L M

-0.005

(-0.13)

N R

±.0.005 ± 0.005

(±0.13) (±0.13)

min Y X

Thread

0.978 0.117 0.942 0.706 0.062 0.125 0.750 0.527 0.540 0.572 1.250 0.473

08 24.84 2.97 23.93 17.93 1.58 3.18 19.05 13.3 13.72 14.53 31.75 12.03 9/16 - 24 NEF

0.978 0.117 1.067 0.706 0 .062 0.125 0.875 0.652 0.665 0.697 1.359 0.590

10 24.84 2.97 27.10 17.93 1.58 3.18 22.23 16.56 16.89 17.70 34.52 14.99 11/16 -24 NEF

0.978 0.117 1.255 0.706 0.062 0.125 1.062 0.815 0.828 0 885 1 531 0.750

12 24.84 2.97 31.88 17.93 1.58 3.18 26.98 20.70 21.03 22.48 38.89 19.05 7/8 -20 UNEF

0.978 0.117 1.380 0.706 0 .062 0.125 1.187 0.939 0.952 1.010 1.656 0.875

14 24.84 2.97 35.05 17.93 1.58 3.18 30.15 23.85 24.18 25.65 42.06 22.23 1 -20 UNEF

0.978 0.117 1.505 0.706 0.062 0.125 1 312 1.063 1.076 1.135 1.781 1.000

16 24.84 2.97 38.23 17.93 1.58 3.18 33.32 27.00 27.33 28.83 45.24 25.40 1.1/8 - 18 NEF

0.978 0.117 1.630 0.706 0 .062 0.125 1.437 1.188 1.201 1.260 1.891 1.125

18 24.84 2.97 41.40 17.93 1.58 3.18 36.50 30.18 30.50 32.00 48 03 28.58 1.1/4 - 18 NEF

1.048 0.148 1.817 0.894 0.062 0.250 1.562 1.313 1.326 1.385 2.031 1.250

20 26.62 3.76 46.15 22.71 1.58 6.35 38.68 33.35 33.68 35.18 51.59 31.75 1.3/8 - 18NEF

1.048 0.148 1.942 0.894 0 .062 0.250 1.687 1.438 1.451 1.510 2.156 1.375

22 26.62 3.76 49.33 22.71 1.58 6.35 42.85 36.53 36.86 38.35 54.76 34.93 1.1 /2 - 18 NEF

1.048 0.148 2.067 0.927 0.062 0.250 1 .812 1 .563 1.576 1 635 2 277 1.500

24 26.62 3.76 52.50 23.55 1.575 6.35 46.05 39.70 40.03 41.45 57.84 38.10 1.5/8 - 18 NEF

57A

(

219

)

62GB-57A (219)

BS9522 - F0017- C2261

Single hole mounting with plain shell

and film wire terminations

Shell

Size A

m B

±0.005

(± 0.13)

sq.

max.

max D

min F

±0.005

(±0.13)

max min K

min max L M N R

-0.005 ±0.005 ±0.005

(-0.13) (±0.13) (±0.13)

min Y X

Thread

0.976 0.117 0.942 0.030 0.028 0.706 0.173 0.133 0.062 0.125 0.750 0.527 0.540 0.572 1.250 0.473

08 24.79 2.97 23.93 0.76 0.71 17.93 4.40 3.38 1.58 3.18 19.05 13.3 13.72 14.53 31.75 12.03 9/16 -24 NEF

0.976 0.117 1.067 0.030 0.028 0.706 0.173 0.133 0.062 0.125 0.875 0.652 0.665 0.697 1.359 0.590

10 24.79 2.97 23.93 0.76 0.71 17.93 4.40 3.38 1.58 3.18 22.23 16.56 16.89 17.70 34.52 14.99 11/16 -24 NEF

0.976 0.117 1.255 0.030 0.028 0.706 0.173 0.133 0.062 0.125 1.062 0.815 0.828 0.885 1.531 0.750

12 24.79 2.97 31.88 0.76 0.71 17.93 4.40 3.38 1.58 3.18 26.98 20.70 21.03 22.48 38.89 19.05 7/8 -20 UNEF

0.976 0.117 1.380 0.030 0.028 0.706 0.173 0.133 0.062 0.125 1.187 0.939 0.952 1.010 1.656 0.875

14 24.79 2.97 35.05 0.76 0.71 17.93 4.40 3.38 1.58 3.18 30.15 23.85 24.18 25.65 42.06 22.26 1 - 20 UNEF

0.976 0.117 1.505 0.030 0.028 0.706 0.173 0.133 0.062 0.125 1.312 1.063 1.076 1.135 1.781 1.000

16 24.79 2.97 38.23 0.76 0.71 17.93 4.40 3.38 1.58 3.18 33.32 27.00 27.33 28.83 45.24 25.40 1.1/8 - 18 NEF

0.976 0.117 1.630 0.030 0.028 0.706 0.173 0.133 0.062 0.125 1.437 1.188 1.201 1.260 1.891 1.125

18 24.79 2.97 41.40 0.76 0.71 17.93 4.40 3.38 1.58 3.18 36.50 30.18 30.50 32.00 48.03 28.58 1.1 /4 - 18 NEF

1 .195 0.148 1 817 0.030 0.028 0.894 0.173 0.133 0.062 0.25 0 1 562 1 .313 1 .326 1 .385 2.031 1 .250

20 30.35 3.76 46.15 0.76 0.71 22.71 4.40 3.38 1.58 6.35 38.68 33.35 35.18 51 59 31.75 1 .3/8 - 18 NEF

1.195 0.148 1.942 0.030 0.028 0.894 0.173 0.133 0.062 0.250 1.687 1.438 1.451 1.510 2.156 1.375

22 30.35 3.76 49.33 0.76 0.71 22.71 4.40 3.38 1.58 6.35 42.85 36.53 36.86 38.35 54.76 34.93 1.1/2 -18NEF

1.228 0.148 2.067 0.030 0.028 0.927 0.173 0.133 0.062 0.250 1.812 1.563 1.576 1.635 2.277 1.500

24 30.35 3.76 52.50 0.76 0.71 23.55 4.40 3.38 1.58 6.35 46.05 39.70 40.03 41.45 57.84 38.10 1.5/8 - 18 NEF

Single Hole Fixing

Receptacles

14E 62GB-14E

MIL-C-26482 MS3114E

BS9522 - F0017

- C2098

Single hole mounting with grommet

and grommet nut.

Has panel 'O' ring seal

Shell

Size A

max B

±0.005

(±0.13)

max

sq.

±0.005

(±0.13)

Dia

Max

min max L M N R

-0.005 ±0.005 ±0.005

(-0.13) ( ±0.13) (±0.13)

S Y X

Thread

1.344 0.117 0.942 0.706 0 713 0.062 0.125 0.750 0.527 0.540 0.572 1.250 0.473

08 34.14 2.97 23.93 17.93 18.11 1.58 3.18 19.05 13.3 13.72 14.53 31.75 12.03 9/16-24NEF

1.344 0.117 1.067 0.706 0.838 0.062 0.125 0.875 0.652 0.665 0.697 1.359 0.590

10 34.14 2.97 27.10 17.93 21.29 1.58 3.18 22.23 16.56 16.89 17.70 34.52 14.99 11/16 -24 NEF

1.344 0.117 1.255 0.706 0.963 0.062 0.125 1.062 0.815 0.828 0.885 1.531 0.750

12 34.14 2.97 31 .88 17.93 24.46 1.58 3.18 26.98 20.70 21.03 22.48 38.89 19.05 7/8 -20 UNEF

1 .344 0.117 1.380 0.706 1.088 0.062 0.125 1.187 0.939 0.952 1.010 1.656 0.875

14 34.14 2.97 35.05 17.93 27.63 1.58 3.18 30.15 23.85 24.18 25.65 42.06 22.23 1 - 20 UNEF

1.344 0.117 1.505 0.706 1.213 0.062 0.125 1.312 1.063 1.076 1.135 1.781 1.000

16 34.14 2.97 38.23 17.93 30.81 1.58 3.18 33.32 27.00 27.33 28.83 45.24 25.40 1.1/8 -18NEF

1.344 0.117 1.630 0.706 1.338 0.062 0.125 1.437 1.188 1.201 1.260 1.891 1.125

18 34.14 2.97 41.40 17.93 33.98 1.58 3.18 36.50 30.18 30.50 32.00 48.03 28.58 1.1/4 –18 NEF

1.576 0.148 1 817 0.894 1.463 0.062 0.250 1.562 1.313 1.326 1.385 2.031 1.250

20 40.03 3.76 46.15 22.71 37.16 1.58 6.35 38.68 33.35 33.68 35.18 51.59 31.75

1.3/8 - 18 NEF

1.576 0.148 1.942 0.894 1 .588 0.062 0.250 1.687 1.438 1.451 1.510 2.156 1.375

22 40.03 3.76 49.33 22.71 40.33 1.58 6.35 42.85 36.53 36.86 38.35 54.76 34.93 1.1 /2 - 18 NEF

1.609 0.148 2.067 0.927 1.713 0.062 0.250 1.812 1.563 1.576 1.635 2.277 1.500

24 40.87 3.76 52.50 23.55 43.51 1.58 6.35 46.05 39.70 40.03 41.45 57.84 38.10 1.5/8 - 18 NEF

14F 62GB-1 4F

MIL-C-26482 MS3 114F

Single hole mounting with grommet and

grommet nut fitted with integral strain

relief clamp.

Has panel 'O' ring seal

Shell

Size A

max B

±0.005

(±0.13)

max

sq.

±0.005

(±0.13)

dia.

max.

0.005

(± 0.13)

min max L M N R

-0.005 ±0.005 ±0.005

(-0.13) (±0.13) (±0.13)

S Y X

Thread

1.762 0.117 0.942 0.706 0.828 0.156 0.062 0.125 0.750 0.527 0.540 0.572 1 250 0.473

08 44.75 2.97 23.93 17.93 21.03 3.96 1.58 3.18 19.05 13.3 13.72 14.53 31.75 12.03 9/1 6 -24 NEF

1.762 0.117 1.067 0.706 0.891 0.188 0.062 0.125 0.875 0.652 0 .665 0.697 1.359 0.590

10 44.75 2.97 27.10 17.93 22.63 4.78 1.58 3.18 22.23 16.56 16.89 17.70 34.52 14.99 11/16 - 124 NEF

1.762 0.117 1.255 0.706 1.016 0.312 0.062 0.125 1.062 0.815 0.828 0.885 1.531 0.750

12 44 75 2.97 31.88 17.93 25.81 7.93 1.58 3.18 26.98 20.70 21.03 22.48 38.89 19.05 7/8 - 20 UNEF

1 .736 0.117 1.380 0.706 7.147 0 .375 0.062 0.125 1.187 0.939 0 .952 1.010 1.656 0.875

14 44.10 2.97 35.05 17.93 28.97 9.53 1.58 3.18 30.15 23.85 24.18 25.65 42.06 22.23 1 - 20 NEF

1.876 0.117 1.505 0.706 1.203 0.500 0.062 0.125 1.312 1.063 1.076 1.135 1.781 1.000

16 47.65 2.97 38.23 17.93 30.56 12.7 1.58 3.18 33.32 27.00 27.33 28.83 45.24 25.40 1.1/8 - 18 NEF

1.876 0.117 1.630 0.706 1.426 0.625 0.062 0.125 1.437 1.188 1 .201 1.260 1.891 7.125

18 47.65 2.97 41.40 17.93 36.22 15.88 1.58 3.18 36.50 30.18 30.50 32.00 48.03 28.58 1.1/4 - 18 NEF

2.118 0.148 1.817 0.894 1.426 0.625 0.062 0.250 1.562 1.313 1.326 1.385 2.031 1.250

20 53.8 3. 76 46.15 22.71 36.22 15.88 1.58 6.35 38 68 33.35 33.68 35.18 51 .59 31.75 1.3/8 - 18 NEF

2.118 0.148 1.942 0.894 7.567 0.750 0.062 0.250 1.687 1.438 1 .451 1.510 2.756 1.375

22 53.8 3.76 49.33 22.71 39.80 19.05 1.58 6.35 42.85 36.53 36.86 38.35 54.76 34.93 1.1/2 -18 NEE

2.250 0.148 2.067 0.927 1.735 0.800 0.062 0.250 1.812 1.563 1.576 1.635 2.277 1.500

24 57.15 3.76 52.50 23.55 44.07 20.32 1.58 6.35 46.05 39.70 40.03 41.45 57.84 38.10 1.5/8 - 18 NEF

Single Hole Fixing

Receptacles

57T 62G B-57T

BS9522 - F0017 - C2100

Single hole mounting with threaded

shell to accept accessories

Shell

Size A

max B

± 0.005

(± 0.13)

max.

sq.

± 0.005

(±0.13)

dia,

max.

min max L M

-0.005

(- 0.13)

N Y X

Thread

0.978 0.117 0.942 0.595 0.426 0.062 0.125 0.750 0.527 0.473

08 24.84 2.97 23.93 15.12 10.82 1.58 3.18 19.05 13.3 7/16 - UNEF 12.03 9/16 - 24 NEF

0.978 0.117 1.067 0.595 0.552 0.062 0.125 0.875 0.652 0.590

10 24.84 2.97 27.10 15.12 14.02 1.58 3.18 22.23 16.56 9/16 – UNEF 14.99 11/16 – 2 4 N E F

0.978 0.117 1.255 0.595 0.677 0.062 0.125 1.062 0.815 0.750

12 24.84 2.97 31 .88 15.12 17.20 1.58 3.18 26.98 20.70

11/16 – UNEF 19.05 7/8 – 20 UNEF

0.978 0.117 1.380 0.595 0.802 0.062 0.125 1.187 0.939 0.875

14 24.84 2.97 35.05 15.12 20.37 1.58 3.18 30.15 23.85 13/16 - UNEF 22.23 1 – 20 UNEF

0.978 0.117 1.505 0.595 0.927 0.062 0.125 1.312 1.063 1.000

16 24.84 2.97 38.23 15.12 23.55 1.58 3.18 33.32 27.00 15/16 – UNEF 25.40 1.1/18 – 18 NEF

0.978 0.117 1.630 0.595 1.052 0.062 0.125 1.437 1.188 1.125

18 24.84 2.98 41.40 15.12 26.72 1.58 3.18 36.50 30.18 1.1/16 – UNEF 28.58 1.1/4 – 18 NEF

1.048 0.148 1.817 0.720 1.167 0.062 0.250 1.562 1.313 1.250

20 26.62 3.76 46.15 18.29 29.65 1 58 6.35 38.68 33.35 1.3/16 – UNEF 31.75 1.3/8 - 18 NEF

1.048 0.148 1.942 0.720 1.292 0.062 0.250 1.687 1.438 1.375

22 26,62 3.76 49.33 18.29 32.82 1.58 6.35 42.85 36.53 1.5/16 – UNEF 34.93 1.1/2 – 18 NEF

1.048 0.148 2.067 0.753 1.416 0.062 0.250 1.812 1.563 1.50

24 26.62 3.76 52.50 19.13 35.97 1.58 6.35 46.05 39.70 1.7/16 - UNEF 38.10 1.5/8 - 18 NEF

17P 62GB-17P

MIL-C-26482 MS3114P

Single hole mounting for potting. Supplied

complete with potting mould locating ring

and panel 'O' ring seal

Shell

Size A

max. B

±0.005

(±0.13)

max.

sq.

± 0.005

(±0.13)

G K

min max. L M

-0.005

(-0.13)

±0.005

(±0.13)

±0.005

(±0.13)

Y Z X

Thread

1.391 0.117 0.942 0.706 0.572 0.062 0.125 0.750 0.527 0.540 0.572 1.250 0.473 0.260

08 35.33 2.97 23.93 17.93 14.53 1.58 3.175 19.05 13.3 13.72 14.53 31.75 12.03 6.60 9/16 -24 NEF

1.391 0.117 1.067 0.706 0 .666 0.062 0.125 0.875 0.652 0.665 0.697 1.359 0.590 0.463

10 35.33 2.97 27.10 17.93 16.92 1.58 3.18 22.23 16.56 16.89 17.70 34.52 14.99 11.76 11/16 -24 NEF

1.391 0.117 1.255 0.706 0.822 0.062 0.125 1.062 0.815 0.828 0.885 1.531 0.750 0.557

12 35.33 2.97 31.88 17.93 20.88 1.58 3.18 26.98 20.70 21.03 22.48 38.89 19.05 14.15 7/8 - 20 UNEF

1.391 0.117 1.380 0.706 0 .907 0.062 0.125 1.187 0.939 0.952 1.010 1.656 0.875 0.590

14 35.33 2.97 35.05 17.93 23.06 1.58 3.18 30.15 23.85 24.18 25.65 42.06 22.23 14.99 1 - 20 UNEF

1.391 0.117 1.505 0.706 1.040 0.062 0.125 1.312 1 063 1 .076 1.135 1.781 1.000 0.713

16 35.33 2.97 38.23 17.93 26.42 1.58 3.18 33.32 27.00 27.33 28.83 45.24 25.40 18.11 1.1/18 – 18 NEF

1.391 0.117 1.630 0.706 1 .165 0.062 0.125 1.437 1.188 1.201 1.260 1.891 1.125 0.835

18 35.33 2.97 41.40 17.93 29.59 1.58 3.175 36.50 30.18 30.50 32.00 48.03 28.58 21.21 1.1/4 - 18 NEF

1.641 0.148 1.817 0.894 1.285 0.062 0.250 1.562 1.313 1.326 1.385 2.031 1.250 1.015

20 41.68 3.76 46.15 22.71 32.64 1.58 6.35 38.68 33.35 33.68 35.18 51.59 31.75 25.78 1.3/8 –18 NEF

1.641 0.148 1.942 0.894 1 .400 0.062 0.250 1.687 1.438 1.451 1.510 2.156 1.375 1.015

22 41.68 3.76 49.33 22.71 35.56 1.58 6.35 42.85 36.53 36.86 38.35 54.76 34.93 25.78 1.1/2 –18 NEF

1.674 0.148 2.067 0.927 1 .540 0.062 0.250 1.812 1 .563 1.576 1.635 2.277 1.500 1.265

24 42.52 3.76 52.50 23.55 39.12 1.58 6.35 46.05 39.70 40.03 41.45 57.84 38.10 32.13 1.5/8 - 18 NEF

Single Hole Fixing

Receptacles

Hermetic Seal

17H 62GB-17H

MIL-C-26482 MS3114H

Single hole mounting with pin contacts in one piece

glass-to-metal seal. Exposed solder buckets or

flattened and pierced pins.

Has panel 'O' ring seal

Shell

Size A

max. B

±0.005

(±0.13)

max.

±0.005

(±0.13)

min K

max L M

-0.005

(-0.13)

N R

±0.005 ±0.005

(±0.13) (±0.13)

S Y X

Thread

0.828 0.094 0.942 0.706 0.062 0.125 0.750 0.527 0.540 0.572 1.250 0.473

08 21.03 2.39 23.93 17.93 1.57 3.18 19.05 13.39 13.72 14.53 31.75 12.01 9/16 - 24 NE F

0.828 0.094 1.067 0.706 0.062 0.125 0.875 0.652 0.665 0.697 1.359 0.590

10 21.03 2.39 27.10 17.93 1.57 3.18 22.23 16.56 16.89 17.70 34.52 14.99 11/16 – 24 NEF

0.828 0.094 1.255 0.706 0.062 0.125 1.062 0.815 0.828 0.885 1.531 0.750

12 21.03 2.39 31.88 17.93 1.57 3.18 26.97 20.70 21.03 22.48 38.89 19.05 7/8 – 20 UNEF

0.828 0.094 1.380 0.706 0.062 0.125 1.187 0.939 0.952 1.010 1.656 0.875

14 21.03 2.39 35.05 17.93 1.57 3.18 30.15 23.85 24.18 25.65 42.06 22.23 1 - 20 UNEF

0.828 0.094 1.505 0.706 0.062 0.125 1.312 1.063 1.076 1.135 1.781 1.000

16 21.03 2.39 38.23 17.93 1.57 3.18 33.32 27.00 27.33 28.53 45.24 25.40 1.1/8 – 18 NEF

0.828 0.094 1.630 0.706 0.062 0.125 1.437 1.188 1.201 1.260 1.891 1.125

18 21.03 2.39 41.40 17.93 1.57 3.18 36.50 30.18 30.51 32.00 48.03 28.58 1.1/4 – 18 NEF

0.828 0.125 1.817 0.894 0.062 0.250 1.562 1.313 1.326 1.385 2.031 1.250

20 21.03 3.18 46.15 22.71 1.57 6.35 39.67 33.35 33.68 35.18 51.59 30.75 1.3/8 – 18 NEF

0.890 0.125 1.942 0.894 0.062 0.250 1.687 1.438 1.451 1.510 2.156 1.375

22 22.61 3.18 49.33 22.71 1.57 6.35 42.85 36.53 36.86 38.35 54.76 34.93 1.1/2 – 18 NEF

0.890 0.125 2.067 0.927 0.062 0.250 1.812 1.563 1.576 1.635 2.277 1.500

24 22.61 3.18 52.50 23.55 1.57 6.35 46.02 39.70 40.03 41.53 57.84 38.10 1.5/8 – 18 NEF

13H 62GB-1 3H

MIL-C-26482 MS3113H

Solder mounting with plain shell and exposed

solder buckets or flattened and pierced pins

Shell

Size A

max B

±0.005

(± 0.13)

max F

±0.005

( ± 0.13)

max J

max R

±0.005

( ± 0.13)

min Y

dia.

max

0.828 0.036 0.630 0.426 0.562 0.592 0.578 1.250 0.473

08 21.03 0.91 16.00 10.82 14.27 15.04 14.68 31.75 12.01

0.828 0.036 0.755 0.426 0.672 0.592 0.687 1.359 0.590

10 21.03 0.91 19.18 10.82 17.07 15.04 17.45 34.52 14.99

0.828 0.036 0.849 0.426 0.781 0.592 0.797 1.531 0.750

12 21.03 0.91 21.56 10.82 19.84 15.04 20.24 38.89 19.05

0.828 0.036 0.974 0.426 0.906 0.592 0.922 1.656 0.875

14 21.03 0.91 24.74 10.82 23.01 15.04 23.42 42.06 22.23

0.828 0.036 1.099 0.426 1.031 0.592 1.047 1.781 1.000

16 21.03 0.91 27.91 10.82 26.19 15.04 26.59 45.24 25.40

0.828 0.036 1.223 0.426 1.156 0.592 1.172 1.891 1.125

18 21.03 0.91 31.06 10.82 29.36 15.04 29.77 48.03 28.58

0.890 0.036 1.317 0.488 1.250 0.658 1.266 2.031 1.250

20 22.61 0.91 33.45 12.40 31.75 16.70 32.16 51.59 30.75

0.890 0.036 1.443 0.488 1.375 0.686 1.390 2.156 1.375

22 22.61 0.91 36.65 12.40 34.93 17.42 35.31 54.76 34.93

0.890 0.036 1.567 0.521 1.500 0.719 1.516 2.277 1.500

24 22.61 0.91 39.80 13.23 38.10 18.26 38.51 57.84 38.10

Single Hole Fixing

Receptacles

5005 62GB-5005-10

(RSRE SD/C 235025/X)

Single hole mounting plain shell with PC pin

terminated contacts. Reduced diameter

flange with panel 'O' seal

Size 10 only

max B

+0.001

-0.002

(+0.03)

(-0.03)

dia.

max

+0.002

-0.003

(+0.05)

(-0.08)

min max M

-0.005

(-0.13)

±0.003

(±0.08)

+0.005

(+0.13)

S Y

dia.

max.

Thread L

dia

10 0.877 0.065 0.880 0.681 0.062 0.125 0.655 0.659 0.690 1.017 0.590 11/16 – 24 NEF 0.820

22.28 1.65 22.35 17.29 1.58 3.18 16.64 16.74 17.52 25.83 14.99 20.83

5036 62GB-5036-10

(RSRE SD/C235025/X)

Single hole mounting with circular flange

and P.C. terminations

Size 10 onl

Shell

Size A

max B

+0.001

-0.002

(+0.03)

(-0.05)

dia.

max

+0.002

-0.003

(+0.05)

(-0.08)

dia.

max.

min max M

-0.005

(-0.13)

±0.003

(±0.08)

+0.005

(+0.13)

S X

Thread L

dia

10 0.829 0.066 0.880 0.679 0.590 0.062 0.125 0.655 0.659 0.690 1.017 11/16 – 24 NEF 0.820

21.06 1.67 22.35 17.25 14.99 1.57 3.18 16.63 16.47 17.52 25.83 20.83

Single Hole Fixing

Receptacles

5016 62GB-5016-10

(RSR E SD/C 235025/ X)

Single hole mounting plain shell for direct wiring

to exposed solder buckets. Reduced diameter

flange with panel 'O' ring seal

Solder bucket: Size 10 onl y

Shell

Size A

max B

+0.002

-0.001

(+0.05)

(-0.03)

dia.

max

+ 0.003

- 0.002

(+ 0.08)

(- 0.05)

min max M

- 0.010

(- 0.25)

± 0.005

(± 0.13)

+ 0.005

(+ 0.13)

S Y

dia.

max.

Thread

10 0.902 0.064 0.880 0.678 0.062 0.125 0.655 0.665 0.697 1.359 0.590 11/16 – 24 NEF

22.91 1.62 22.35 17.21 1.58 3.18 16.63 16.89 17.70 34.52 14.99

5024 62GB-5024

(RSRE SD/C 35077/X)

Single hole mounting plain shell for direct wiring

to exposed solder buckets. Reduced diameter

flange with panel 'O' ring seal

Solder buckets: Size 8, 12 and 14 only

Shell

Size A

max B

± 0.0 05

( ± 0.13)

dia.

max

± 0.005

( ± 0.13)

min max M

- 0.005

(- 0.13)

N R

± 0.005 ±0.005

(± 0.13) (± 0.13)

min Y

dia.

max

Thread

0.978 0.117 0.830 0.706 0.062 0.125 0.527 0.540 0.572 1.250 0.473

08 24.84 2.97 21.08 17.93 1.58 3.18 13.3 13.72 14.53 31.75 12.03 9/16 - 24 NEF

0.978 0.117 1.130 0.706 0.062 0.125 0.815 0.828 0.885 1.531 0.750

12 24.84 2.97 28.70 17.93 1.58 3.18 20.70 21.03 22.48 38.89 19.05 7/8 - 20 UNEF

0.978 0.117 1.260 0.706 0.062 0.125 0.939 0.952 1.010 1.656 0.875

14 24.84 2.97 32.00 17.93 1.58 3.18 23.85 24.18 25.65 42.06 22.23 1 -20 UNEF

Single Hole Fixing

Receptacles

5052 62GB-5052-10

Single hole fixing with circular flange and back

end thread - solder termination

Size 10 only

Shell

Size A

max B

(± 0.05)

(± 0.03)

max.

sq.

+ 0.003

- 0.002

(+ 0.08)

(- 0.05)

min max L M

- 0.005

(- 0.13)

± 0.005

(± 0.13)

± 0.005

(± 0.13)

± 0.005

(± 0.13)

Thread

10 0.947 0.062 0.880 0.677 0.062 0.125 0.820 0.650 5/8 – 24 UNEF 0.697 1.359 5/8 – 24 NEF

24.06 1.58 22.35 17.19 1.58 3.18 20.83 16.51 17.70 34.52

5030 62GB-5030

Bulkhead mounting receptacle with solder

terminations

Shell

Size A

max B

± 0.0 05

(± 0.13)

± 0.0 10

(± 0.25)

± 0.0 05

(± 0.13)

L N

Thread

0.978 0.094 0.812 0.415 0.563

08 24.85 2.39 20.63 10.54 14.30

7/16 - 28 U N E F

0.978 0.094 0.937 0.415 0.680

10 24.85 2.39 23.80 10.54 17.28 9/16 - 24 NEF

0.978 0.094 1.031 0.415 0.859

12 24.85 2.39 26.19 10.54 21.82

11 /16 - 24 NEF

0.978 0.094 1.125 0.415 0.984

14 24.85 2.39 28.58 10.54 25.00 13/16 - 20 UNEF

0.978 0.094 1.218 0.415 1.108

16 24.85 2.39 30.94 10.54 28.15

15/16 - 20 UNEF

0.978 0.094 1.3121 0.415 1.233

18 24.85 2.39 33.33 10.54 31.32 1.1/16 - 18NEF

1.048 0.102 1.437 0.535 1.358

20 26.62 2.59 36.50 13.59 34.50

1.3/16 -18NEF

1.048 0.102 1.562 0.535 1.483

22 26.62 2.59 39.68 13.59 37.67 1.5/16 - 18 NEF

1.048 0.102 1.687 0.572 1.610

24 26.62 2.59 42.85 14.53 40.90

1.7/16 - 18 NEF

Single Hole Fixing

Receptacles

5065 62G B-5065

BS9522-F0017 C2261

Single hole mounting with plain shell

and film wire terminations

Shell

Size A

max B

± 0.005

(± 0.13)

sq. D

max min F

± 0.005

(± 0.13)

max min J

± 0.020

(± 0.51)

min max L M N R

-0.005 ±0.005 ±0.005

(-0.13) (±0.13) (±0.13)

S Y X

Thread

1.021 0.117 0.942 0.030 0.028 0.706 0.218 0.178 0.060 0.062 0.125 0.750 0.527 0.540 0.572 1 250 0.473

08 25.94 2.97 23.93 0.76 0.71 17.93 5.54 4.52 1.52 1.58 3.18 19.05 13.3 13.72 14.53 31.75 12.03 9/16 - 24 NEF

1.021 0.117 1.067 0.030 0.028 0.706 0.218 0.178 0.060 0.062 0.125 0.875 0.652 0.665 0.697 1.359 0.590

10 25.94 2.97 27.10 0.76 0.71 17.93 5.54 4.52 1.52 1.58 3.18 22.23 16.56 16.89 17.70 34.52 14.99 11/16 - 24 NEF

1.021 0.117 1.255 0.030 0.028 0.706 0.218 0.178 0.060 0.062 0.125 1.062 0.815 0.828 0.885 1.531 0.750

12 25.94 2.97 31.88 0.76 0.71 17.93 5.54 4.52 1.52 1.58 3.18 26.98 20.70 21.03 22.48 38.89 19.05 7/8 - 2 0 UNEF

1.021 0.117 1.380 0.030 0.028 0.706 0.218 0.178 0.060 0.062 0.125 1.187 0.939 0.952 1.010 1.656 0.875

14 25.94 2.97 35.05 0.76 0.71 17.93 5.54 4.52 1.52 1.58 3.18 30.15 23.85 24.18 25.65 42.06 22.23 1 - 20 UNEF

1.021 0.117 1.505 0.030 0.028 0.706 0.218 0.178 0.060 0.062 0.125 1.312 1.063 1.076 1.135 1.781 1.000

16 25.94 2.97 38.23 0.76 0.71 17.93 5.54 4.52 1 .52 1.58 3.18 33.32 27.00 27.33 28.83 45 24 25.40 1.1/8 - 18 NEF

1.021 0.117 1.630 0.030 0.028 0.706 0.218 0.178 0.060 0.062 0.125 1.437 1.188 1.201 1.260 1.891 1.125

18 25.94 2.97 41.40 0.76 0.71 17.93 5.54 4.52 1.52 1.58 3.18 36.50 30.18 30.50 32.00 48.03 28.58 1.1 /4 - 18 NEF

1.240 0.148 1.817 0.030 0.028 0.894 0.218 0.178 0.060 0.062 0.250 1.562 1.313 1.326 1.385 2.031 1 .250

20 31.50 3.76 46.15 0.76 0.71 22.71 5.54 4.52 1.52 1.58 6.35 38.68 33.35 33.68 35.18 51.59 31.75

1.3/8 - 18 NEF

1.240 0.148 1942 0.030 0.028 0.894 0.218 0.178 0.060 0.062 0.250 1.687 1.438 1.451 1.510 2.156 1.375

22 31 .50 3.76 49.33 0.76 0.71 22.71 5.54 4.52 1 .52 1.58 6.35 42.85 36.53 36.855 38.35 54.76 34.93 1.1/2 - 18 NEF

1.273 0.148 2.067 0.030 0.028 0.927 0.218 0.178 0.060 0.062 0.250 1.812 1.563 1.576 1.635 2.277 1 .500

24 32.34 3.76 52.50 0.76 0.71 23.55 5.54 4.52 1.52 1.58 6.35 46.05 39.70 40.03 41.45 57.84 38.10 1.5/8 - 18 NEF

5067 62GB-5067

BS9522 - F0017- C2261

Single hole mounting with plain shell

and film wire terminations

Shell

Size A

max B

± 0.005

(± 0.13)

max

max min F

± 0.005

(± 0.13)

max min J

± 0.012

(± 0.30)

min max L M N R

-0.005 ±0.005 ±0.005

(-0.13) (±0.13) (±0.13)

S Y X

Thread

1.095 0.117 0.942 0.030 0.028 0.706 0.262 0.230 0.049 0.062 0.125 0.750 0.527 0.540 0.572 1.250 0.473

08 27.81 2.97 23.93 0.76 0.71 17.93 6.66 5.85 1.24 1.58 3.18 19.05 13.3 13.72 14.53 31.75 12.03 9/16 - 24 NEF

1.095 0.117 1.067 0 .030 0.028 0.706 0.262 0.230 0.049 0.062 0.125 0.875 0.652 0.665 0.697 1.359 0.590

10 27.81 2.97 27.10 0.76 0.71 17.93 6.66 5.85 1.24 1.58 3.18 22.23 16.56 16.89 17.70 34.52 14.99 11/16 - 24 NEF

1.095 0.117 1.255 0.030 0.028 0.706 0.262 0.230 0.049 0.062 0.125 1.062 0.815 0.828 0.885 1.531 0.750

12 27.81 2.97 31.88 0.76 0.71 17.93 6.66 5.85 1.24 1.58 3.18 26.98 20.70 21.03 22.50 38.89 19.05 7/8 - 20 UNEF

1.095 0.117 1.380 0 .030 0.028 0.706 0.262 0.230 0.049 0.062 0.125 1.187 0.939 0.952 1.010 1.656 0.875

14 27.81 2.97 35.10 0.76 0.71 17.93 6.66 5.85 1.24 1.58 3.18 30.15 23.85 24.18 25.65 42.06 22.23 1 - 20 UNEF

1.095 0.117 1.505 0.030 0.028 0.706 0.262 0.230 0.049 0.062 0.125 1.312 1.063 1.076 1.135 1.781 1.000

16 27.81 2.97 38.23 0.76 0.71 17.93 6.66 5.85 1.24 1.58 3.18 33.23 27.00 27.33 28.83 45.24 25.40 1.1/8 -18 NEF

1.095 0.117 1.630 0 .030 0.028 0.706 0.262 0.230 0.049 0.062 0.125 1.437 1.188 1.201 1.260 1.891 1.125

18 27.81 2.97 41.40 0.76 0.71 17.93 6.66 5.85 1.24 1.58 3.18 36.50 30.18 30.51 32.00 48.03 28.58 1.1 /4 - 18 NEF

1.309 0.148 1.817 0.030 0.028 0.894 0.262 0.230 0.049 0.062 0.250 1.562 1.313 1.326 1.385 2.031 1 .250

20 33.24 3.76 46.15 0.76 0.71 22.71 6.66 5.85 1.24 1.58 6.35 38.68 33.35 33.68 35.18 51.59 31.75 1.3/8 -18 NEF

1.309 0.148 1.942 0 .030 0.028 0.894 0.262 0.230 0.049 0.062 0250 1.687 1.438 1.451 1.510 2.156 1.375

22 33.24 3.76 49.33 0.76 0.71 22.71 6.66 5.85 1.24 1.58 6.35 42.85 36.53 36.86 38.35 54.76 34.93 1.1/2 -18 NEF

1.342 0.148 2.067 0.030 0.028 0.927 0.262 0.230 0.049 0.062 0.250 1.812 1.563 1.576 1.635 2.277 1.500

24 34.08 3.76 52.50 0.76 0.71 23.55 6.66 5.85 1.24 1.58 6.35 46.03 39.07 40.03 41.59 57.84 38.10 1.5/8 -18 NEF

Cable Mounting

Receptacles

Table of Styles

62GB-51

62GB-11

62GB-11E

62GB-11F

62GB-11J

62GB-11P

Page No.

Cable Mounting

Receptacles

51T 62GB-51T

BS9522-F0017-C2101

Basic cable mounting receptacle with

threaded shell to accept standard cable

accessories.

Shell

Size A

max B

± 0.005

(± 0.13)

max

± 0.005

(± 0.13)

dia

max

Thread

0.978 0.094 0.817 0.415 0.473

08 24.84 2.39 20.75 10.54 12.03 7/16 - 28 UNEF

0.978 0.094 0.942 0.415 0.590

10 24.84 2.39 23.93 10.54 14.99 9/16 - 24 NE F

0.978 0.094 1.036 0.415 0.750

12 24.84 2.39 26.32 10.54 19.05

11 /16 - 24 NEF

0.978 0.094 1.130 0.415 0.875

14 24.84 2.39 28.70 10.54 22.23 13/16 - 20 UNEF

0.978 0 094 1.223 0.415 1.000

16 24.84 2.39 31.07 10.54 25.40

15/16 - 20 UNEF

0.978 0.094 1.317 0.415 1.125

18 24.84 2.39 33.45 10.54 28.58 1.1/16 -18 NEF

1.048 0.102 1.442 0.535 1.250

20 26 62 2.59 36.63 13.59 31.75 1 .3/16 -18 NEF

1.048 0.102 1.567 0.535 1.375

22 26.62 2.59 39.80 13.59 34.93 1.5/16 -18 NEF

1.048 0.102 1.692 0.560 / 0.574 1.500

24 26.62 2.59 42.98 14.23 / 14.58 38.10

1.7/16 -18 NEF

11A 62GB-11A

Cable mounting receptacle with general

duty back shell. No grommet supplied.

Shell

Size A

max B

± 0 005

(± 0.13)

max

± 0.0 05

(± 0.13)

dia

max

Dia

max

Thread

1.624 0.094 0.817 0.415 0.561 0.473

08 41.25 2.39 20.75 10.54 14.25 12.03

1/2 - 28 UNEF

1 .624 0.094 0.942 0.415 0.686 0.590

10 41.25 2.39 23.93 10.54 17.43 14.99 5/8 - 24 NEF

1.624 0.094 1.036 0.415 0.811 0.750

12 41.25 2.39 26.32 10.54 20.60 19.05

3/4 - 20 UNEF

1.624 0.094 1.130 0.415 0.936 0.875

14 41.25 2.39 28.70 10.54 23.78 22.23 7/8 - 20 UNEF

1.624 0.094 1.223 0.415 1.061 1.000

16 41.25 2.39 31.07 10 54 26.95 25.40

1 – 20 UNEF

1.624 0.094 1.317 0.415 1.186 1.125

18 41.25 2.39 33.45 10.54 30.13 28.58 1.3/16 – 18 NEF

1.687 0 104 / 0.100 1.442 0.535 1.311 1.250

20 42.85 2.64 / 2.55 36.63 13.59 33.30 31.75

1 3/16 -18 NEF

1.687 0.104 / 0.100 1.567 0.535 1.436 1.375

22 42.85 2.64 / 2.55 39.80 13.59 36.75 34.93 1.7/16 -18 NEF

1.730 0.104 / 0.10 0 1.692 0.569 / 0.574 1.561 1.500

24 43.94 2.64 / 2.55 42.98 14.45 / 14.58 39.65 38.10 1 .7/16 -18 NEF

Cable Mounting

Rece

tacles

11E 62GB-11E

MIL-C-26482 MS3111E

Cable mounting receptacle with grommet

and grommet nut

Shell

Size A

max B

± 0.005

(± 0.13)

max

± 0.0 05

(± 0.13)

dia

max

dia

max

1.281 0.094 0.817 0.415 0.561 0.473

08 32.54 2.39 20.75 10.54 14.25 12.03

1.281 0.094 0 .942 0.415 0.686 0.590

10 32.54 2.39 23.93 10.54 17.43 14.99

1.281 0.094 1.036 0.415 0.811 0.750

12 32.54 2.39 26.32 10.54 20.60 19.05

1.281 0.094 1 .130 0.415 0.936 0.875

14 32.54 2.39 28.70 10.54 23.78 22.23

1.281 0.094 1.223 0.415 1.061 1.000

16 32.54 2.39 31.07 10.54 26.95 25.40

1.281 0.094 1 .317 0.415 1.186 1.125

18 32.54 2.39 33.45 10.54 3013 28.58

1.383 0.102 1.442 0.535 1.311 1.250

20 35.13 2.59 36.63 13.59 33.30 31.75

1.383 0.102 1 .567 0.535 1.436 1.375

22 35.13 2.59 39.80 13.59 36.75 34.93

1.383 0.102 1.6 92 0.569 / 0.574 1.561 1.500

24 35.13 2.59 42.98 14.45 / 14.58 39.65 38.10

62GB

11F

MIL-C-26482 MS 3 111F

Cable mounting receptacle with

grommet and grommet nut fitted with

inte

ral strain relief clam

Shell

Size A

max B

± 0.005

(± 0.13)

max

± 0.005

(± 013)

dia

max

± 0.005

(± 0.13)

dia

max

08 1.762 0.094 0.817 0.415 0.828 0.156 0.473

44.75 2.39 20.75 10.54 21.03 3.96 12.03

10 1.762 0.094 0.942 0 415 0.891 0.188 0 .590

44.75 2.39 23.93 10.54 22.63 4.78 14.99

12 1.762 0.094 1.036 0.415 1.016 0.312 0.750

44.75 2.39 26.32 10.54 25.81 7.93 19.05

14 1.736 0.094 1.130 0.415 1.141 0.375 0.875

44.10 2.39 28.70 10.54 28.97 9.53 22.23

16 1.876 0.094 1.223 0.415 1.203 0.500 1.000

47.65 2.39 31.07 10.54 30.56 12.7 25.40

18 1.876 0.094 1.317 0.415 1.426 0.625 1.125

47.65 2.39 33.45 10.54 36.22 15.88 28.58

20 2.118 0.104 / 0.100 1.442 0.535 1 .426 0.625 1.250

53.80 2.64 / 2.55 36.63 13.59 36.22 15.88 31.75

22 2.118 0.104 / 0.100 1.567 0.535 1.567 0.750 1.375

53.80 2.64 / 2.55 39.80 13.59 39.80 19.05 34.93

24 2.250 0.104 / 0.100 1.692 0.569 / 0.574 1.735 0.800 1.500

57.15 2.64 / 2.55 42.98 14.45 / 14.58 44.07 20.32 38.10

11F

Cable Mounting

Receptacles

11J

62GB

11J

With cable clamp for unscreened

jacketed cable. No grommet supplied

Shell

Size A

max B

± 0.005

(± 0.13)

max

± 0.0 05

(± 0.13)

dia

max

dia

max

min

closed Z

max

free

1.846 0.094 0.817 0.415 0.561 0.473 0.168 0.230

08 46.89 2.39 20.75 10.54 14.25 12.03 4.28 5.84

1.846 0.094 0 .942 0.415 0.686 0.590 0.205 0.312

10 46.89 2.39 23.93 10.54 17.43 14.99 5.21 7.93

1.947 0.094 1.036 0.415 0.811 0.750 0.338 0.442

12 49.45 2.39 26.32 10.54 20.60 19.05 8.59 11.23

2.147 0.094 1 .130 0.415 0.936 0.875 0.416 0.539

14 54.54 2.39 28.70 10.54 23.78 22.23 10.57 13.69

2.347 0.094 1.223 0.415 1.061 1.000 0.550 0.616

16 59.61 2.39 31.07 10.54 26.95 25.40 13.97 15.65

2.547 0.094 1 .317 0.415 1.186 1.125 0.600 0.672

18 64.70 2.39 33.45 10.54 30.13 28.58 15.24 17.07

2.831 0.102 1.442 0.535 1.311 1.250 0.635 0.747

20 71.91 2.59 36.63 13.59 33.30 31.75 16.13 18.98

3.031 0.102 1 .567 0.535 1.436 1.375 0.670 0.846

22 76.99 2.59 39.80 13.59 36.75 34.93 17.02 21.49

3.074 0.102 1.692 0.569 / 0.574 1.561 1.500 0.740 0.894

24 78.03 2.59 42.98 14.45 / 14.58 39.65 38.10 18.80 22.71

11P

62GB

11P

MIL-C-26482 MS3111P

For potted seal supplied complete with

detachable potting mould and location ring

Shell

Size A

max 8

± 0.0 05

(± 0.13)

max

± 0.005

(± 0.13)

dia

max

dia

max

min

1.316 0.094 0.817 0.415 0.572 0.473 0.260

08 33.43 2.39 20.75 10.54 14.53 12.03 6.60

1.425 0.094 0.942 0.415 0.666 0.590 0.463

10 36.20 2.39 23.93 10.54 16.92 14.99 11.76

1.394 0.094 1.036 0.415 0.822 0.750 0.557

12 35.41 2.39 26.32 10.54 20.88 19.05 14.15

1.394 0.094 1.130 0.415 0.907 0.875 0.590

14 35.41 2.39 28.70 10.54 23.04 22.23 14.99

1.394 0.094 1.223 0.415 1.040 1.000 0.713

16 35.41 2.39 31.07 10.54 26.42 25.40 18.11

1.394 0.094 1.317 0.415 1.165 1.125 0.835

18 35.41 2.39 33.45 10.54 29.59 28.58 22.21

1.612 0.102 1.442 0.535 1.285 1.250 1.015

20 40.95 2.59 36.63 13.59 32.64 31.75 25.78

1.612 0.102 1.567 0.535 1.400 1.375 1.015

22 40.95 2.59 39.80 13.59 35.56 34.93 25.78

1.674 0.102 1.692 0.569 / 0.574 1.540 1.500 1.265

24 42.52 2.59 42.98 14.45 / 14.58 39.12 38.10 32.13

nser

ons

For M I L-C-26482 and for

replacement purposes in

BS9522 FOO 17

Normal position

with pin contacts Alternative position of insert

with socket contacts

(∅ counterclockwise)

Each diagram shows mating face of insert.

Alternate position of insert

with pin contacts

(

∅

clockwise)

Orientation ∅ (degree s)

Insert

Arrangement Normal W X Y Z

8-2 0 58 122 - -

8-3 0 60 210 - -

8-33 0 90 - - -

8-4 0 45 - - -

8-98 0 - - - -

10-2 0 - - - -

10-6 0 90 - - -

10-7 0 - - - -

12-3 0 - - 180 -

12-10 0 60 155 270 295

14-5 0 40 92 184 273

14-12 0 43 90 - -

14-15 0 17 110 155 234

14-19 0 30 165 315 -

16-18 0 54 152 180 331

16-23 0 158 270 - -

16-26 0 60 - 275 338

18-11 0 62 119 241 340

18-32 0 85 138 222 265

20-16 0 238 318 333 347

20-41 0 45 126 225 -

22-21 0 16 135 175 349

22-55 0 30 142 226 314

24-61 0 90 180 270 324

Key/Keyway

Orientations

For BS9522 F0017

Datum is always taken from major key or keyway. In

receptacles the m ajor keyw ay always remains fixed

in relat ion to the mounting flange. For the

A',B,C,D',E and F orientations, the three bayonet

location s and as soci a t ed min o r ke ywa ys are rotated

complete, in accordance with the table below.

N.B.-

The accompa n yi n g di ag r am sh o w s a r ec e ptacle

shell, with keyways. Corresponding key orientations

for a mating plug shell are therefore always

clockwise.

Shell

Size Values for ∝

(degrees) Values for θ

(degrees) Values for β

(degrees)

N A* B C D* E F N A* B C D* E F N A* B C D* E F