TD62382AFN TOSHIBA BIPOLAR DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC TD62382AFN 8CH LOW INPUT ACTIVE DARLINGTON SINK DRIVER The TD62382AFN is non-inverting transistor array which is comprised of eight Low saturation output stages and PNP input stages. This device can be operated by source input voltage and is suitable for operation with a 5-V general pourposed logic IC such as TTL, 5-V CMOS and 5-V Microprocessor which have sink current output drivers. Applications include relay, hammer, lamp and LED display drivers. Please observe the thermal condition for using. FEATURES Low Saturation Output : 0.23 V (MAX) @ Iout = 40 mA (MAX) Weight: 0.09 g (Typ.) Package Type : SSOP18 pin (0.65 mm pitch) Output Rating : 50 V (MIN) / 50 mA (MAX) Low Level Active Input Input Compatible with TTL and 5-V CMOS Standard Supply Voltage PIN CONNECTION (TOP VIEW) SCHEMATICS (EACH DRIVER) Note: The input and output parasitic diodes cannot be used as clamp diodes. 1 2001-07-16 TD62382AFN MAXIMUM RATINGS (Ta = 25C) CHARACTERISTIC SYMBOL RATING UNIT VCC -0.5~7.0 V VCE (SUS) -0.5~50 V Output Current IOUT 50 mA / ch Input Voltage VIN -22~VCC + 0.5 V Input Current IIN 10 mA 0.96 W Supply Voltage Output Sustaining Voltage Power Dissipation PD (Note) Operating Temperature Topr -40~85 C Storage Temperature Tstg -55~150 C Note: On Glass Epoxy PCB (50 x 50 x 1.6 mm Cu 40%) RECOMMENDED OPERATING CONDITIONS (Ta = -40~85C) CHARACTERISTIC MIN TYP. MAX UNIT VCC 4.5 5.0 5.5 V VCE (SUS) 0 50 V DC 1 Circuit 0 40 8 Circuits 0 40 VIN -20 VCC Output On VIN (ON) -20 VCC - 3.5 Output Off VIN (OFF) VCC - 0.3 VCC + 0.5 PD (Note) 0.4 W MIN TYP. MAX UNIT Supply Voltage Output Sustaining Voltage Output Current Input Voltage IOUT Power Dissipation Note: SYMBOL TEST CONDITION mA / ch V On Glass Epoxy PCB (50 x 50 x 1.6 mm Cu 40%) ELECTRICAL CHARACTERISTICS (Ta = 25C) SYMBOL TEST CIR- CUIT ICEX 1 VCC = 5.5 V, IIN = 0 VOUT = 35 V, Ta = 75C 100 A VCE (sat) 2 VCC = 4.5 V, VIN = 0.8 V IOUT = 40 mA 0.23 V Output On IIN (ON) 3 VCC = 5.5 V, VIN = 0.4 V -0.32 -0.45 VCC = 5.5 V, VIN = -20 V -2.6 Output Off IIN (OFF) 4 -40 A VIN (ON) 5 -20 VCC -3.5 V VCC = 5.5 V, VIN = 0 V 6 mA / ch VCC = VIN = 5.5 V Ta = 75C 100 A VOUT = 50 V RL = 1 k 0.1 VOUT = 50 V RL = 1 k 3.0 CHARACTERISTIC Output Leakage Current Output Saturation Voltage Input Current Input Voltage (Output on) Output On Supply Current Turn-On Delay Output Off ICC(ON) ICC(OFF) 6 tON 7 Turn-Off Delay tOFF TEST CONDITION VCC = 5 V CL = 15 pF 2 mA s 2001-07-16 TD62382AFN TEST CIRCUIT 1. ICEX 2. VCE (sat) 3. IIN (ON) 4. IIN (OFF) 5. VIN (ON) 6. ICC 7. tON, tOFF Note 1: Pulse Width 50 s, Duty Cycle 10% Output Impedance 50 , tr 10 ns, tf 5 ns Note 2: CL includes probe and jig capacitance. PRECAUTIONS for USING This IC does not include built-in protection circuits for excess current or overvoltage. If this IC is subjected to excess current or overvoltage, it may be destroyed. Hence, the utmost care must be taken when systems which incorporate this IC are designed. Utmost care is necessary in the design of the output line, VCC and GND line since IC may be destroyed due to short-circuit between outputs, air contamination fault, or fault by improper grounding. 3 2001-07-16 TD62382AFN 4 2001-07-16 TD62382AFN PACKAGE DIMENSIONS SSOP18-P-225-0.65 Unit: mm Weight: 0.09 g (Typ.) 5 2001-07-16 TD62382AFN RESTRICTIONS ON PRODUCT USE 000707EBA * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * The products described in this document are subject to the foreign exchange and foreign trade laws. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice. 6 2001-07-16