Fuse Holders for Low-Peak CUBEFuse
Finger-Safe, 1-100A, 600Vac/dc
Catalog Symbols: TCFH30N (1-30A)
TCFH60N (1-60A)
TCFH100N (1-100A)
Construction: Finger-safe
Mounting: DIN Rail or panel mount
Ampacities: TCFH30N - holds any 1-30A CUBEFuse
TCFH60N - holds any 1-60A CUBEFuse
TCFH100N - holds any 1-100A CUBEFuse
Voltage Rating: 600Vac/dc
Withstand Rating: 300kA RMS Sym. (UL)
200kA RMS Sym. (CSA)
100kA DC (UL & CSA)
Agency Information:
• UL Listed Fuse Holder: Guide IZLT, File E14853
• CSA Certified Fuse Holder: Class 6225-01, File 47235
• CE compliance for the European Union low voltage directive
Operating and Storage Temperature Range: -40 to 80°C
Material Specifications:
• Holder case: Glass filled PBT
• Interface clips: Copper alloy
• Interface clip plating: Tin
• Terminals: Steel
• DIN Rail spring: Stainless steel
Features and Product Benefits
• Holder for the world’s first finger-safe power fuse system.
• Holder and CUBEFuse together deliver Class CF and Class J fuse
performance in a time-delay or fast-acting version. See Data Sheet 9000
for time-delay indicating and non-indicating CUBEFuse
performance characteristics. See data sheet 2147 for fast-acting
CUBEFuse performance characteristics.
• Smallest fuse and holder footprint of any class fuse installation including
Class J, CC, T and RK.
• DIN Rail or panel mount for easy installation.
• Holders dovetail together to easily achieve the required number of poles.
• All holders (TCFH30N, TCFH60N and TCFH100N) dovetail together to permit
mixing ampacities.
• All holders accept equal and lower amp rated TCF_ indicating and TCF_RN
non-indicating time-delay CUBEFuse or FCF_RN fast-acting CUBEFuse - no
need for a fuse reducer.
• Dual wire rated terminals for wiring ease.
• High 300kA withstand rating stands up to high fault currents.
Conductors/Wire Range - 75ºC Cu Wire Only
Part Carton Weight Per Carton
Number Qty. lbs kg
TCFH30N 12 2.42 1.10
TCFH60N 12 2.57 1.17
TCFH100N 6 1.38 0.63
Holder/ No. of Single Dual
Ampacity Poles* Wire Wire
TCFH30N 1 18 to 8 AWG 18 to 10 AWG
TCFH60N 1 18 to 4 AWG 18 to 6 AWG
TCFH100N 1 18 to 1 AWG 6 AWG
* Holders dovetail together to achieve the desired number of poles for the application.
Carton Quantity and Weight
Terminal Torque Ratings by Conductor and Holder Size (75°C Cu only)
TCFH30N TCFH60N TCFH100N
Single Dual Single Dual Single Dual
10-8 AWG 25lb-in 18-10 AWG 25lb-in 18-10 AWG 20lb-in 18-10 AWG 20lb-in 18-10 AWG 25lb-in 6 AWG 45lb-in
18-12 AWG 20lb-in 8-4 AWG 35lb-in 8-6 AWG 35lb-in 8-1 AWG 40lb-in
0710 BU-SB10812 Page 1 of 2 Data Sheet 9007
A
B
C
D
A
A
D
B
C
E
F
TCFH Dimensions – in (mm)
TCFH30N & TCFH60N
TCFH100N
TCF_100RN FCF_100RN CF_ Quik-Spec™ Safety
Switch disconnect (optional
window). Data Sheet 1156
CCP_CF
1-, 2- & 3-Pole switched disconnects
Data Sheet 1157
CUBEFuse Availability and Applications
The indicating Low-Peak time-delay CUBEFuse (TCF_) and non-indicating
Low-Peak time-delay CUBEfuse (TCF_RN) are available in amp ratings from
1-100A. See Data Sheet 9000. The non-indicating, fast-acting Low-Peak
CUBEFuse is available in amp ratings from 1-100A. See data sheet 2147.
The CUBEFuse is also used in these other Cooper Bussmann
circuit protection solutions.
Holder A B C D E F
TCFH30N 2.30 0.76 1.357 0.15 - -
(58.50) (19.37) (34.24) (3.76) - -
TCFH60N 2.60 1.03 1.60 0.17 - -
(66.12) (26.23) (40.64) (4.34) - -
TCFH100N 2.91 1.05 2.01 0.15 0.80 2.51
(73.81) (26.74) (50.93) (3.81) (20.39) (63.65)
© 2011 Cooper Bussmann
www.cooperbussmann.com
0711 BU-SB10812 Page 2 of 2 Data Sheet 9007
The only controlled copy of this Da ta Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This
bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applica tions. Cooper Bussmann reser ves the right, with-
out notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice,
any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
CCPB
1-, 2- & 3-Pole disconnects for the Quik-Spec™
Coordination Panelboard. Data Sheet 1160
