CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead New! @Super low ESR, high ripple current capability @Downsized from PSE series (F6.3B8L to F5B8L) @Longer life (5,000 hours at 105C) @ESR after endurance is specified within the initial spec @RoHS Compliant @Halogen Free PSK Downsized PSE ?SPECIFICATIONS Items Category Temperature Range Characteristics -55 to +105C Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current *Note Dissipation Factor (tane) 2.5Vdc P20% (M) Rated voltage(V)B1.15 500MA max. Low Temperature Characteristics (Max.Impedance Ratio) Z(-25C)/Z(+20C)[1.15 Z(-55C)/Z(+20C)[1.25 Endurance Bias Humidity Test Surge Voltage Test Failure Rate (at 20C, 120Hz) (at 105C) (at 20C after 2 minutes) 0.10 max. (at 20C, 120Hz) (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 5,000 hours at 105C. Appearance No significant damage Capacitance change [P20% of the initial value D.F. (tanE) [The initial specified value ESR [The initial specified value Leakage current [The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20C after subjecting them to DC voltage at 60C, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change [P20% of the initial value D.F. (tanE) [The initial specified value ESR [The initial specified value Leakage current [The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105C for 30 seconds through a protective resistor(R=1kO) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change [P20% of the initial value D.F. (tanE) [The initial specified value ESR [The initial specified value Leakage current [The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105C) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105C. ?DIMENSIONS [mm] FP0.5 @Terminal Code : E FD' Fd Coated Case (E08) L' 15min. Size code fD fd F fD' L' E08 5.0 0.45 2.0 FD+0.5max. L+1.0max. ?MARKING EX) 2.5V560MF K 6D6 560 2.5 V 4min. (1/2) CAT. No. E1001K CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead New! ?PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 A PSK 2 R 5 E AA 5 6 1 M E 0 8 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 560MF:561) Lead forming*Taping code Terminal code Voltage code Series code Category Please refer to "Product code guide (conductive polymer type)" ?STANDARD RATINGS WV(Vdc) Cap(mF) Case size fDbL(mm) ESR (mo max./20c, 100k to 300kHz) Rated ripple current (mArms/105c, 100kHz) 2.5 220 330 470 560 5B8 5B8 5B8 5B8 7 7 7 7 4,350 4,350 4,350 4,350 Part No. APSK2R5ESS221ME08S APSK2R5ESS331ME08S APSK2R5ESS471ME08S APSK2R5ESS561ME08S SS : Enter the appropriate lead forming or taping code. (2/2) CAT. No. E1001K