1.375 DIA.
4-LEG CLIP SIZE: 25mm
0.255 HT.
1-FIN HS:
2
1
3
04/07/04
A
B
C
D
7
8
A
B
C
D
1
2
3
4
5
6
7
8
4. RoHS COMPLIANT AND CERTIFIED.
OF TYCO. MUST BE RETURNED TO TYCO (HTS661-U)
C-3-1542005-7
DWG. NO.
ASSEMBLY
25mm HEATSINK
IN WRITING BY AN AUTHORIZED OFFICIAL
SPECIFIED
TOLERANCES ARE:
UNLESS OTHERWISE
..XX
..XXXX
.
DATE
DRAWN BY:
ENGINEER:
E.T 04/01/04
TITLE:
SIZE:
2:1 REV:
B
SCALE: PART NO: 3-1542005-7
A
SHEET:
1 OF 1
PROJECTION
DIMENSONS ARE IN:
INCHES
FILENAME PROJECT SYSTEM TNIRD ANGLE
.XXX
ANGLES
ANY PURPOSES EXCEPT AS AUTHORIZED
TO OTHERS. REPRODUCED OR USED FOR
ELECTRONICS. NOT TO BE DISCLOSED
CONFIDENTIAL PROPERTY OF TYCO
OR OTHER PURPOSES FOR WHICH LENT.
DO NOT SCALE
DATE MATERIAL:
FINISH:
SEE NOTE
SEE NOTE
ON DEMAND, ON COMPLETION OF ORDERS
NOTE:
1. MATERIAL:
HEAT SINK: ALUM. (BLACK ANODIZE)
CLIP: BLACK PEI (UL94-VO)
2. BEFORE THE HEATSINK APPLICATION, THE USER
SHOULD IDENTIFY THE SPECIFICATION OF MAXIMUM
LOAD ON THE BGA PACKAGE.
HEATSINK TORQUE SPECIFICATIONS CONVERTED TO FORCE.
BARE DIE PACKAGE:
1.5 INCH - LB TORQUE = 8.5 LBS FORCE
2.0 INCH - LB TORQUE =11.4 LBS FORCE
FULL SIZE LID PACKAGE:
1.5 INCH - LB TORQUE = 8.3 LBS FORCE
2.0 INCH - LB TORQUE = 11.1 LBS FORCE
3. REMOVE CLIP WITH REMOVAL TOOL P/N: 1542616-1.
B. PETROCELLI
A
1.069
.095
±.005
.030 ±.0201.375
MAX.125
±.005
.115 .245
.987 LIP LEG
B
B
SECTION B-B
5/8" - 27 UNS - 2A
THREAD
.255
.998
DETAIL A
SCALE = 6X
.016±.002
ITEM DESCRIPTION QTY
1MOUNTING CLIP 1
2HEAT SINK 1
3INTERFACE 1
Power
° C/W @
Ambient
° C/W @
200 LFM
° C/W @
400 LFM
° C/W @
600 LFM
5 Watts 14.41 8.95 6.47 5.00
10 Watts 12.71 8.86 6.79 4.94
15 Watts 11.58 8.77 6.76 4.85
CUSTOMER DRAWING
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
REVISION(S)
LTR DESCRIPTION INIT APP'D
OECN: 0S60-0081-04 E.T 04/1/04 B.P 04/07/04
AECN: 0S60-0181-04 E.T 7/12/04 B.P 7/14/04
BECR-06-008334 E.T 4/5/06 C.W 4/6/06
