Document Number: 94389 For technical questions, contact: diodes-tech@vishay.com www.vishay.com
Revision: 06-Jun-08 1
Phase Control SCR, 35 A
40TPS16PbF High Voltage Series
Vishay High Power Products
DESCRIPTION/FEATURES
The 40TPS16PbF High Voltage Series of silicon
controlled rectifiers are specifically designed for
medium power switching and phase control
applications. The glass passivation technology
used has reliable operation up to 125 °C junction
temperature. Low Igt parts available.
Typical applications are in input rectification (soft start) and
these products are designed to be used with Vishay HPP
input diodes, switches and output rectifiers which are
available in identical package outlines.
This product has been designed and qualified for industrial
level and lead (Pb)-free (“PbF” suffix).
PRODUCT SUMMARY
VT at 40 A < 1.45 V
ITSM 500 A
VRRM 1600 V
(G) 3
2
(A)
1 (K)
TO-247AC
Available
Pb-free
RoHS*
COMPLIANT
MAJOR RATINGS AND CHARACTERISTICS
PARAMETER TEST CONDITIONS VALUES UNITS
IT(AV) Sinusoidal waveform 35
A
IRMS 55
VRRM/VDRM 1600 V
ITSM 500 A
VT40 A, TJ = 25 °C 1.45 V
dV/dt 1000 V/µs
dI/dt 100 A/µs
TJ- 40 to 125 °C
VOLTAGE RATINGS
PART NUMBER
VRRM/VDRM, MAXIMUM
REPETITIVE PEAK AND
OFF-STATE VOLTAGE
V
VRSM, MAXIMUM
NON-REPETITIVE PEAK
REVERSE VOLTAGE
V
IRRM/IDRM
AT 125 °C
mA
40TPS16PbF 1600 1700 10
* Pb containing terminations are not RoHS compliant, exemptions may apply
www.vishay.com For technical questions, contact: diodes-tech@vishay.com Document Number: 94389
2Revision: 06-Jun-08
40TPS16PbF High Voltage Series
Vishay High Power Products Phase Control SCR, 35 A
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average on-state current IT(AV) TC = 79 °C, 180° conduction half sine wave 35
A
Maximum continuous RMS
on-state current as AC switch IT(RMS) 55
Maximum peak, one-cycle
non-repetitive surge current ITSM
10 ms sine pulse, rated VRRM applied
Initial TJ =
TJ maximum
500
10 ms sine pulse, no voltage reapplied 600
Maximum I2t for fusing I2t10 ms sine pulse, rated VRRM applied 1250 A2s
10 ms sine pulse, no voltage reapplied 1760
Maximum I2√t for fusing I2√t t = 0.1 to 10 ms, no voltage reapplied 12 500 A2√s
Low level value of threshold voltage VT(TO)1
TJ = 125 °C
1.02 V
High level value of threshold voltage VT(TO)2 1.23
Low level value of on-state slope resistance rt1 9.74 mΩ
High level value of on-state slope resistance rt2 7.50
Maximum peak on-state voltage VTM 110 A, TJ = 25 °C 1.85 V
Maximum rate of rise of turned-on current dI/dt TJ = 25 °C 100 A/µs
Maximum holding current IH150
mA
Maximum latching current IL300
Maximum reverse and direct leakage current IRRM/IDRM
TJ = 25 °C VR = Rated VRRM/VDRM
0.5
TJ = 125 °C 10
Maximum rate of rise of off-state voltage dV/dt TJ = TJ maximum, linear to 80 % VDRM, Rg-k = Open 1000 V/µs
TRIGGERING
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum peak gate power PGM 10 W
Maximum average gate power PG(AV) 2.5
Maximum peak gate current IGM 2.5 A
Maximum peak negative gate voltage - VGM 10
V
Maximum required DC gate
voltage to trigger VGT
TJ = - 40 °C
Anode supply = 6 V resistive load
4.0
TJ = 25 °C 2.5
TJ = 125 °C 1.7
Maximum required DC gate current to trigger IGT
TJ = - 40 °C 270
mA
TJ = 25 °C 150
TJ = 125 °C 80
TJ = 25 °C, for 40TPS08A 40
Maximum DC gate voltage not to trigger VGD TJ = 125 °C, VDRM = Rated value 0.25 V
Maximum DC gate current not to trigger IGD 6mA
Document Number: 94389 For technical questions, contact: diodes-tech@vishay.com www.vishay.com
Revision: 06-Jun-08 3
40TPS16PbF High Voltage Series
Phase Control SCR, 35 A Vishay High Power Products
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum junction and storage
temperature range TJ, TStg - 40 to 125 °C
Maximum thermal resistance,
junction to case RthJC DC operation 0.6
°C/W
Maximum thermal resistance,
junction to ambient RthJA 40
Maximum thermal resistance,
case to heatsink RthCS Mounting surface, smooth and greased 0.2
Approximate weight 6g
0.21 oz.
Mounting torque minimum 6 (5) kgf · cm
(lbf · in)
maximum 12 (10)
Marking device Case style TO-247AC 40TPS16
www.vishay.com For technical questions, contact: diodes-tech@vishay.com Document Number: 94389
4Revision: 06-Jun-08
40TPS16PbF High Voltage Series
Vishay High Power Products Phase Control SCR, 35 A
Fig. 1 - Current Rating Characteristics
Fig. 2 - Current Rating Characteristics
Fig. 3 - On-State Power Loss Characteristics
Fig. 4 - On-State Power Loss Characteristics
Fig. 5 - Maximum Non-Repetitive Surge Current
Fig. 6 - Maximum Non-Repetitive Surge Current
70
80
90
100
110
120
130
010203040
30° 60°
90°
120°
180°
Maximum Allowable Case Temperature (°C)
Conduction Angle
Average On-state Current (A)
40TPS.. Series
R (DC) = 0.6 °C/ W
thJC
70
80
90
100
110
120
130
0 102030405060
DC
30° 60°
90°
120°
180°
Average On-state Current (A)
Maximum Allowable Case Temperature (°C)
Conduction Period
40TPS.. Series
R (DC) = 0.6 °C/ W
thJC
0
10
20
30
40
50
60
0 5 10 15 20 25 30 35 40
RM S Li m i t
Conduction Angle
Maximum Average On-state Power Loss (W)
Average On-state Current (A)
180°
120°
90°
60°
30°
4 0 TPS. . Se r i e s
T = 125 ° C
J
0
10
20
30
40
50
60
70
80
0 102030405060
DC
180°
120°
90°
60°
30°
RM S Li m it
Conduction Period
Maximum Average On-state Power Loss (W)
Average On-state Current (A)
40TPS.. Series
T = 125 °C
J
250
300
350
400
450
500
550
110100
Number Of Equal Amplitude Half Cycle Current Pulses (N)
Pe a k Ha lf Sine Wave On-state Current (A)
Initia l T = 125°C
@ 60 Hz 0.0083 s
@ 50 Hz 0.0100 s
J
4 0 TP S. . Se r i e s
At Any Ra ted Load Condit ion And With
Rated V Applied Following Surge.
RRM
250
300
350
400
450
500
550
600
0.01 0.1 1
Peak Half Sine Wave On-state Current (A)
Pulse Tra in D ur a t io n ( s)
Maximum Non Repetitive Surge Current
Versus Pulse Train Duration. Control
Of Conduction May Not Be Maintained.
4 0 TP S. . Se r i e s
Initia l T = 125°C
No Volta ge Rea p p lied
Rated V Reapplied
J
RRM
Document Number: 94389 For technical questions, contact: diodes-tech@vishay.com www.vishay.com
Revision: 06-Jun-08 5
40TPS16PbF High Voltage Series
Phase Control SCR, 35 A Vishay High Power Products
Fig. 7 - On-State Voltage Drop Characteristics
Fig. 8 - Gate Characteristics
Fig. 9 - Thermal Impedance ZthJC Characteristics
1
10
100
0.5 1 1.5 2
T = 2 5 ° C
Instantaneous On-state Current (A)
In st a nt a n e o u s O n -st a t e V o lt a g e ( V)
T = 125°C
J
4 0 TP S. . Se r i e s
J
0.1
1
10
100
0.001 0.01 0.1 1 10 100 1000
(b)
(a)
Rectangular gate pulse
(4) (3) (2) (1)
(1) PGM = 100 W, t p = 500 µs
(2) PGM = 50 W, tp = 1 ms
(3) PGM = 20 W, tp = 25 ms
(4) PGM = 10 W, tp = 5 ms
Instantaneous Gate Current (A)
Instantaneous Gate Voltage (V)
TJ = -40 °C
TJ = 25 °C
TJ = 125 °C
a)Recommended load line for
b)Recommended load line for
VGD
IGD
Frequency Limited by PG(AV)
ra ted di/ dt : 20 V, 30 ohms
tr = 0.5 µs, tp >= 6 µs
<= 30% rated di/ dt: 20 V, 65 ohms
tr = 1 µs, tp >= 6 µs
40TPS..
0.01
0.1
1
0.0001 0.001 0.01 0.1 1
Square Wave Pulse Duration (s)
Steady State Value
(DC Operation)
Si n g l e Pu l se
D = 0.50
D = 0.33
D = 0.25
D = 0.17
D = 0.08
40TPS.. Se ries
thJC
Tr a n si e n t Th e r m a l I m p e d a n c e Z ( ° C / W )
www.vishay.com For technical questions, contact: diodes-tech@vishay.com Document Number: 94389
6Revision: 06-Jun-08
40TPS16PbF High Voltage Series
Vishay High Power Products Phase Control SCR, 35 A
ORDERING INFORMATION TABLE
1
- Current rating (40 = 40 A)
2
- Circuit configuration:
3
- Package:
4
T = Thyristor
- Type of silicon:
5
- Voltage rating (16 = 1600 V)
P = TO-247
S = Standard recovery rectifier
6
-None = Standard production
PbF = Lead (Pb)-free
Device code
51324
6
40 T P S 16 PbF
LINKS TO RELATED DOCUMENTS
Dimensions http://www.vishay.com/doc?95024
Part marking information http://www.vishay.com/doc?95226
Outline Dimensions
www.vishay.com Vishay Semiconductors
Revision: 16-Jun-11 1Document Number: 95223
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS in millimeters and inches
Notes
(1) Dimensioning and tolerancing per ASME Y14.5M-1994
(2) Contour of slot optional
(3) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at
the outermost extremes of the plastic body
(4) Thermal pad contour optional with dimensions D1 and E1
(5) Lead finish uncontrolled in L1
(6) Ø P to have a maximum draft angle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154")
(7) Outline conforms to JEDEC outline TO-247 with exception of dimension c
SYMBOL MILLIMETERS INCHES NOTES SYMBOL MILLIMETERS INCHES NOTES
MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX.
A 4.65 5.31 0.183 0.209 D2 0.51 1.30 0.020 0.051
A1 2.21 2.59 0.087 0.102 E 15.29 15.87 0.602 0.625 3
A2 1.50 2.49 0.059 0.098 E1 13.72 - 0.540 -
b 0.99 1.40 0.039 0.055 e 5.46 BSC 0.215 BSC
b1 0.99 1.35 0.039 0.053 FK 2.54 0.010
b2 1.65 2.39 0.065 0.094 L 14.20 16.10 0.559 0.634
b3 1.65 2.37 0.065 0.094 L1 3.71 4.29 0.146 0.169
b4 2.59 3.43 0.102 0.135 N 7.62 BSC 0.3
b5 2.59 3.38 0.102 0.133 P 3.56 3.66 0.14 0.144
c 0.38 0.86 0.015 0.034 P1 - 6.98 - 0.275
c1 0.38 0.76 0.015 0.030 Q 5.31 5.69 0.209 0.224
D 19.71 20.70 0.776 0.815 3 R 4.52 5.49 1.78 0.216
D1 13.08 - 0.515 - 4 S 5.51 BSC 0.217 BSC
0.10 AC
M M
E
N
(2)
(3)
(4)
(4)
(2) R/2
B
2 x R
S
D
See view B
2 x e
b4
3 x b
2 x b2
L
C
(5) L1
123
Q
D
A
A2
A
A
A1
C
Ø K BD
M M
A
(6) Ø P (Datum B)
FP1
D1 (4)
4
E1
0.01 BD
M M
View A - A
Thermal pad
D2
DDE E
CC
View B
(b1, b3, b5) Base metal
c1
(b, b2, b4)
Section C - C, D - D, E - E
(c)
Planting Lead assignments
Diodes
1. - Anode/open
2. - Cathode
3. - Anode
Document Number: 91000 www.vishay.com
Revision: 11-Mar-11 1
Disclaimer
Legal Disclaimer Notice
Vishay
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
