Data Brief
For further information contact your local STMicroelectronics sales office.
November 2008 Rev 1 1/4
4
STEVAL-ISA057V1
15 W wide range SMPS for metering based on the ESBT™
STC03DE220HV and L6565 PWM controller
Features
Minimum input voltage: 125 VDC
Maximum input voltage: 1250 VDC
Output voltage: 5 V to 3.0 A
Maximum output power: 15 W
Short-circuit protection based on auto-restart
feature
Minimum switching frequency limited to 30 kHz
Safety compliant according EN60950
Overall converter efficiency > 60%
Not galvanic isolated solution used in most
metering applications
PCB type and size:
Material of PCB: FR4
Double side layout
Total diameter of demonstration board
58 x 120 mm
Description
This demonstration board implements a 15 W
flyback SMPS which is a very popular and much
known topology in applications switch mode
power supplies where the required output power
is in the range of 5 W to 200 W.
The converter is based on the L6565 PWM driver
working in quasi resonant mode, it means zero
voltage switching or at least switching in valley
during turn-off phases and current mode primary
control.
Excellent wide voltage input range from 125 VDC
to 1250 VDC with good efficiency.
For this application is used an ESBT switch:
STC03DE22HV.
The ESBT is a cascade configuration of a high
voltage BJT and a low voltage power MOSFET.
STMicroelectronics optimizes performance of
both devices and offers this kind of switch in one
single package to reduce application complexity,
EMI, price and increase reliability and
performance.
STEVAL-ISA057V1
!-V
www.st.com
Circuit schematic STEVAL-ISA057V1
2/4
1 Circuit schematic
Figure 1. Schematic
!-V
'
%$9
'
9
)
)XVH
$
S
&
Q
&
S
&
Q
&
Q
&
X)
&
9
&6
*1'
&203
,19
9))
287
9&&
=&'
8
/
5 5
N
5
N
5
N
5

5
5
5
N
5
N
5
5
5
5
5
5
5
N
5
N
5
5
5
N
5
N
5
' 6736
-
FRQQHFWRU
287
9$
*1
'
3ULPDU\
/S P+
73-03
9'&
VHFRQGDU
\
N
5
X)9
&
Q
&
1S1V 
3ULPDU\
-
FRQQHFWR
U,1
X)
&
9
N
5
N
5
X)
&
9
N
5
N
5
0
5
0
5
0
5
0
5
0
5
0
5
N
5
N
5
N
5
N
5
N
5
X
&
X
&
N
5
N
5 DX[


7 WUDQVIB(7'BB(*6721B
4
67&GHKY
4
673'
4
%&
' 6736/
'
%$9
Q
&
6!
STEVAL-ISA057V1 Revision history
3/4
2 Revision history
Table 1. Document revision history
Date Revision Changes
12-Nov-2008 1 Initial release.
STEVAL-ISA057V1
4/4
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, an
y
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2008 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com